Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 9 of 9
Full-Text Articles in Physics
Color-Changing Reflection Hologram For Quality Assurance Of Therapeutic Ultrasound Systems, Tatsiana Mikulchyk, John Walsh, Jacinta Browne, Izabela Naydenova, Dervil Cody
Color-Changing Reflection Hologram For Quality Assurance Of Therapeutic Ultrasound Systems, Tatsiana Mikulchyk, John Walsh, Jacinta Browne, Izabela Naydenova, Dervil Cody
Articles
The acoustic output of clinical therapeutic ultrasound equipment requires regular quality assurance (QA) testing to ensure the safety and efficacy of the treatment and that any potentially harmful deviations from the expected output power density are detected as soon as possible. A hologram, consisting of a reflection grating fabricated in an acrylate photopolymer film, has been developed to produce an immediate, visible, and permanent change in the color of the reconstructed hologram from red to green in response to incident ultrasound energy. The influence of the therapeutic ultrasound insonation parameters (exposure time, ultrasound power density, and proximity to the point …
Holographic Beam-Shaping Diffractive Diffusers Fabricated By Using Controlled Laser Speckle, Kevin Murphy, Vincent Toal, Izabela Naydenova, Suzanne Martin
Holographic Beam-Shaping Diffractive Diffusers Fabricated By Using Controlled Laser Speckle, Kevin Murphy, Vincent Toal, Izabela Naydenova, Suzanne Martin
Articles
A method for fabricating diffractive holographic optical diffusers is reported, allowing a high degree of control of the resulting diffuser characteristics. The method consists of recording a laser speckle pattern using a single carrier beam, with controlled speckle size and shape, in an acrylamide-based volume photopolymer. The multiple interferences that create the speckle pattern form the hologram. Results are presented verifying the diffusers are volume holographic in nature and the speckle pattern is recorded accurately in the photopolymer. Diffusers recorded by this method are analysed to characterise the optical performance of the diffusers and to illustrate their beam-shaping capabilities, particularly …
Humidity And Temperature Induced Changes In The Diffraction Efficiency And The Bragg Angle Of Slanted Photopolymer-Based Holographic Gratings, Tatsiana Mikulchyk, James Walshe, Dervil Cody, Suzanne Martin, Izabela Naydenova
Humidity And Temperature Induced Changes In The Diffraction Efficiency And The Bragg Angle Of Slanted Photopolymer-Based Holographic Gratings, Tatsiana Mikulchyk, James Walshe, Dervil Cody, Suzanne Martin, Izabela Naydenova
Articles
This work explores the humidity and temperature response of volume phase slanted gratings recorded in photopolymers with varied chemical composition. Acrylamide and diacetone acrylamide were used as monomers and triethanolamine and N-phenylglycine were used as photoinitiators. The study demonstrates that the response of photopolymer-based holographic gratings to relative humidity (RH) and temperature (T) can be tuned by alteration of the photopolymer composition.Humidity and temperature response of the holograms has been characterized by recording Bragg selectivity curves of transmission gratings and by monitoring the position of the maximum intensity in the spectral response of reflection gratings. Investigation of the humidity response …
Diffractive Optical Elements With A Large Angle Of Operation Recorded In Acrylamide Based Photopolymer On Flexible Substrates, Hoda Akbari, Izabela Naydenova, Lina Persechini, Sean Garner, Pat Cimo, Suzanne Martin
Diffractive Optical Elements With A Large Angle Of Operation Recorded In Acrylamide Based Photopolymer On Flexible Substrates, Hoda Akbari, Izabela Naydenova, Lina Persechini, Sean Garner, Pat Cimo, Suzanne Martin
Articles
A holographic device characterised by a large angular range of operation is under development. The aim of this study is to increase the angular working range of the diffractive lens by stacking three layers of high efficiency optical elements on top of each other so that light is collected (and focussed) from a broader range of angles. The angular range of each individual lens element is important, and work has already been done in an acrylamide-based photosensitive polymer to broaden the angular range of individual elements using holographic recording at a low spatial frequency.This paper reports new results on the …
Development Of A Panchromatic Acrylamide Based Photopolymer For Multicolour Reflection Holography, Chakrapani Meka, Raghavendra Jallapuram, Izabela Naydenova, Suzanne Martin, Vincent Toal
Development Of A Panchromatic Acrylamide Based Photopolymer For Multicolour Reflection Holography, Chakrapani Meka, Raghavendra Jallapuram, Izabela Naydenova, Suzanne Martin, Vincent Toal
Articles
The development of a panchromatic acrylamide based photopolymer (ABP) for holographic recording application is presented. The scattering of the recording medium was characterised by measuring the Bidirectional Scattering Distribution Function (BSDF). The dynamic range in reflection mode of recording was evaluated by measuring the diffraction efficiencies of the holographic gratings recorded individually at 633nm, 532nm, and 473nm wavelengths at spatial frequencies of 4200 l/mm, 5000 l/mm and 5700 l/mm respectively. Spectral characterisation of the reflection gratings recorded using a combined single RGB beam was carried out and the reconstructed wavelengths were monitored and compared with the recording wavelengths. The recorded …
Study Of The Photoinduced Surface Relief Modulation In Photopolymers Caused By Illumination With A Gaussian Beam Of Light, Tzvetanka Babeva, Dana Mackey, Suzanne Martin, Izabela Naydenova, Vincent Toal
Study Of The Photoinduced Surface Relief Modulation In Photopolymers Caused By Illumination With A Gaussian Beam Of Light, Tzvetanka Babeva, Dana Mackey, Suzanne Martin, Izabela Naydenova, Vincent Toal
Articles
The formation of surface relief profile in photopolymerisable systems when illuminated with a focused beam of light is simulated numerically using a two-way diffusion model that takes account both for monomer and short polymer chains diffusion. The concentration and spatial distribution dynamics of monomer and short and long polymer chains are calculated. The surface profile is obtained from calculated components concentrations considering different densities of monomer and polymer. The influence of the illumination time, intensity and spot diameter on the surface profiles dynamics is discussed. A good agreement between the calculated and the experimentally measured profiles is observed thus demonstrating …
Optical Properties Of Photopolymer Layers Doped With Aluminophosphate Nanocrystals, Elsa Leite, Tzvetanka Babeva, E Ng, Vincent Toal, Svetlana Mintova, Izabela Naydenova
Optical Properties Of Photopolymer Layers Doped With Aluminophosphate Nanocrystals, Elsa Leite, Tzvetanka Babeva, E Ng, Vincent Toal, Svetlana Mintova, Izabela Naydenova
Articles
The optical properties of photopolymer layers consisting of an acrylamide–based matrix and microporous aluminophosphate nanocrystals of AEI- type are investigated. The compatibility of the photopolymer doped with the nanoparticles is studied. The surface and volume properties of the layers with different levels of doping with microporous nanocrystals are characterized. The effective refractive indices and absorption coefficients of the doped photopolymer layers are determined and used to calculate the refractive index and porosity of pure AEI nanoparticles used as dopants. Volume transmission gratings were recorded in the doped photopolymer layers at different spatial frequencies. By spatial monitoring of the characteristic Raman …
Fabrication Of Switchable Liquid Crystal Devices Using Surface Relief Gratings In Photopolymer, Pavani Kotakonda, Izabela Naydenova, Robert Howard, Suzanne Martin, Vincent Toal
Fabrication Of Switchable Liquid Crystal Devices Using Surface Relief Gratings In Photopolymer, Pavani Kotakonda, Izabela Naydenova, Robert Howard, Suzanne Martin, Vincent Toal
Articles
Holographically recorded surface relief gratings in dry, self-developing acrylamide based photopolymer were used to fabricate two types of switchable liquid crystal (LC) device. One is an electrically switchable LC diffraction grating and the other is an electrically switchable polarization rotator. The electrically switchable diffraction grating was characterized by measuring the dependence of the intensity in the first diffracted order on the applied electric field. The polarization rotator was characterized by studying the influence of the applied electric field on the twist angle and the variation of intensity in the zero and the first orders of diffraction.
Nanocomposites For Novel Holographic Applications, Izabela Naydenova, Svetlana Mintova, Suzanne Martin, Vincent Toal
Nanocomposites For Novel Holographic Applications, Izabela Naydenova, Svetlana Mintova, Suzanne Martin, Vincent Toal
Articles
Nanozeolites incorporated into photopolymerizable holographic recording materials can be used for holographic sensing, data storage, and optical systems design.