Open Access. Powered by Scholars. Published by Universities.®

Physics Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 18 of 18

Full-Text Articles in Physics

Magnetic And Transport Properties Of Nimnal Thin Films, Andriy Vovk, Minghui Yu, Leszek Malkinski, Charles O'Connor, Zhenjun Wang, Eden Durant, Jinke Tang, Vladimir Golub Oct 2014

Magnetic And Transport Properties Of Nimnal Thin Films, Andriy Vovk, Minghui Yu, Leszek Malkinski, Charles O'Connor, Zhenjun Wang, Eden Durant, Jinke Tang, Vladimir Golub

Jinke Tang

The magnetic and transport properties of Ni2MnAl thin films prepared using pulse laser deposition were investigated. It was shown that the films are granular and multiphase. Contrary to the data reported earlier we observe nonmonotonic temperature dependence of resistance with minimum in the vicinity of 100 K for the films deposited on substrates held at 773 K and negative magnetoresistance (MR) values of about 2.5% at 5 K and 1.6% at RT in magnetic field of 50 kOe. These values of MR are the highest reported up to date for Ni2MnAl films. Large negative MR in …


Ultrafine Nife2o4 Powder Fabricated From Reverse Microemulsion Process, Jiye Fang, Narayan Shama, Le Duc Tung, Eun Young Shin, Charles J. O'Connor, Kevin L. Stokes, Gabriel Caruntu, John B. Wiley, Leonard Spinu, Jinke Tang Oct 2014

Ultrafine Nife2o4 Powder Fabricated From Reverse Microemulsion Process, Jiye Fang, Narayan Shama, Le Duc Tung, Eun Young Shin, Charles J. O'Connor, Kevin L. Stokes, Gabriel Caruntu, John B. Wiley, Leonard Spinu, Jinke Tang

Jinke Tang

NiFe2O4 ultrafine powder with high crystallinity has been prepared through a reverse microemulsion route. The composition in starting solution was optimized, and the resulting NiFe2O4 was formed at temperature of around 550–600 °C, which is much lower than that observed from the solid-state reaction. Magnetic investigation indicates that samples are soft-magnetic materials with low coercivity and with the saturation magnetization close to the bulk value of Ni ferrite.


Apparatus For Studying Wave Motion And Sound At The University Of Nebraska– Lincoln's “Historical Scientific Instrument Gallery”, Lily M. Wang, M. Eugene Rudd Jun 2014

Apparatus For Studying Wave Motion And Sound At The University Of Nebraska– Lincoln's “Historical Scientific Instrument Gallery”, Lily M. Wang, M. Eugene Rudd

Lily M Wang

The University of Nebraska–Lincoln's “Historical Scientific Instrument Gallery,'' compiled by the second author in 1998, contains approximately 700 inventoried items and may be visited on-line at http://physics.unl.edu/outreach/histinstr/. Amidst the collection are several acoustical instruments that were used in the early 1900s. These include equipment that demonstrate wave motion (traveling wave machine, mercury ripple dish, vibration microscope), wave interference (interference machine), resonance conditions (Helmholtz resonators, vibrating rods, singing flames, sonometer), and sound generation (Galton's whistles, high-frequency tuning forks, large tuning forks, organ pipes, siren saw). A review of the equipment and the history of their use at the University of Nebraska …


Effect Of Trans-Cis Photoisomerization On Phase Equilibria And Phase Transition Of Liquid-Crystalline Azobenzene Chromophore And Its Blends With Reactive Mesogenic Diacrylate, Namil Kim, Quan Li, Thein Kyu Apr 2014

Effect Of Trans-Cis Photoisomerization On Phase Equilibria And Phase Transition Of Liquid-Crystalline Azobenzene Chromophore And Its Blends With Reactive Mesogenic Diacrylate, Namil Kim, Quan Li, Thein Kyu

Thein Kyu

Photoisomerization-induced phase transition of neat liquid-crystalline azobenzene chromophore (LCAC) and its effect on phase diagrams of its mixtures with reactive mesogenic diacrylate monomer (RM257) have been investigated experimentally and theoretically. Upon irradiation with ultraviolet light, the nematic phase of LCAC transformed to isotropic, while the crystal phase showed corrugated textures on the surface (i.e., ripples). The phase-transition temperatures and corresponding morphologies of the blends have been investigated by means of differential scanning calorimetry and optical microscopy. A theoretical phase diagram of a binary nematic and crystalline system was constructed by self-consistently solving the combined free energies of Flory-Huggins, Maier-Saupe, and …


Spatio-Temporal Growth Of Nematic Domains In Liquid Crystal Polymer Mixtures, Hao-Wen Chiu, Thein Kyu Apr 2014

Spatio-Temporal Growth Of Nematic Domains In Liquid Crystal Polymer Mixtures, Hao-Wen Chiu, Thein Kyu

Thein Kyu

Dynamics of phase separation and morphology development in mixtures of a low molar mass liquid crystal (LC) and a polymer have been investigated theoretically in comparison with experimental results. In the theoretical model, the combined free-energy densities of Flory-Huggins theory for isotropic mixing and Maier-Saupe theory for nematic ordering have been incorporated into the time-dependent Ginzburg-Landau equation (type C). The temporal evolution of the structure factor and the emergence of phase-separated liquid crystal domains have been simulated on the basis of an explicit central difference method based on a square lattice (128 x 128) with a periodic boundary condition. Of …


Phase Diagrams Of A Binary Smectic-A Mixture, Hao-Wen Chiu, Thein Kyu Apr 2014

Phase Diagrams Of A Binary Smectic-A Mixture, Hao-Wen Chiu, Thein Kyu

Thein Kyu

A variety of smectic phase diagrams involving smectic-isotropic and smectic-nematic-isotropic transitions have been calculated based on a combination of Flory-Huggins (FH) theory for isotropic mixing and Maier-Saupe-McMillan (MSM) theory for smectic-A ordering of liquid crystals (LC). To describe the mesophase transitions, two nematic order parameters and two smectic order parameters have been coupled through the normalized orientation distribution and partition functions. Flory-Huggins interaction parameter (chi) for isotropic mixing and the coupling term involving the nematic interaction parameter (nu) and the McMillan smectic interaction parameter (alpha) for phase transitions of liquid crystals have been incorporated in the calculation. The predictive capability …


Compatibility Of Elastomers With Refrigerant Lubricant Mixtures, Gary Hamed, R. Seiple Apr 2014

Compatibility Of Elastomers With Refrigerant Lubricant Mixtures, Gary Hamed, R. Seiple

Gary R. Hamed

No abstract provided.


Observation Of Novel Liquid-Crystalline Phase Above The Bulk-Melting Temperature, Keshav Gautam, Satyendra Kumar, Didier Wermeille, Doug Robinson, Ali Dhinojwala Apr 2014

Observation Of Novel Liquid-Crystalline Phase Above The Bulk-Melting Temperature, Keshav Gautam, Satyendra Kumar, Didier Wermeille, Doug Robinson, Ali Dhinojwala

Ali Dhinojwala

In this paper, we show that a noncrystalline but ordered smectic-like phase exists above the bulk-melting temperature (T-m) at poly(n-alkyl acrylates)-air interface. The surface ordered phase is one monolayer thick and undergoes a sharp transition from order to disorder 10degreesC above T-m for n=22. The presence of a surface phase that does not exist in the bulk has important implications in the design of thermally responsive adhesives.


Statistical Mechanics Of Wormlike Polymers From A New Generating Function. Ii. The Force-Elongation Relationship, Gustavo Carri Apr 2014

Statistical Mechanics Of Wormlike Polymers From A New Generating Function. Ii. The Force-Elongation Relationship, Gustavo Carri

Gustavo A. Carri

No abstract provided.


Statistical Mechanics Of Worm-Like Polymers From A New Generating Function, Gustavo A. Carri, Marcelo Marucho Apr 2014

Statistical Mechanics Of Worm-Like Polymers From A New Generating Function, Gustavo A. Carri, Marcelo Marucho

Gustavo A. Carri

We present a mathematical approach to the worm-like chain model of semiflexible polymers. Our method is built on a novel generating function from which all the properties of the model can be derived. Moreover, this approach satisfies the local inextensibility constraint exactly. In this paper, we focus on the lowest order contribution to the generating function and derive explicit analytical expressions for the characteristic function, polymer propagator, single chain structure factor, and mean square end-to-end distance. These analytical expressions are valid for polymers with any degree of stiffness and contour length. We find that our calculations are able to capture …


Driver Dynamics And The Longitudinal Control Model, Gabriel Leiner Feb 2014

Driver Dynamics And The Longitudinal Control Model, Gabriel Leiner

Gabriel Leiner

Driver psychology is one of the most difficult phenomena to model in the realm of traffic flow theory because mathematics often cannot capture the human factors involved with driving a car. Over the past several decades, many models have attempted to model driver aggressiveness with varied results. The recently proposed Longitudinal Control Model (LCM) makes such an attempt, and this paper offers evidence of the LCM's usefulness in modeling road dynamics by analyzing deceleration rates that are commonly associated with various levels of aggression displayed by drivers. The paper is roughly divided into three sections, one outlining the LCM's ability …


Modeling The High-Speed Switching Of Far-Infrared Radiation By Photoionization In A Semiconductor, Thomas E. Wilson Feb 2014

Modeling The High-Speed Switching Of Far-Infrared Radiation By Photoionization In A Semiconductor, Thomas E. Wilson

Thomas E. Wilson

Data from an earlier study [T. Vogel et al., Appl. Opt. 31, 329 (1992)] on the subnanosecond switching of 119-μm radiation in high-resistivity silicon by pulsed UV laser radiation, is compared with a refined one-dimensional numerical multilayer model accounting for the generation, recombination, and diffusion of the free carriers on the resulting far-infrared optical properties of the silicon. The inclusion of recent measurements for carrier-density and temperature-dependent transport parameters leads to improved agreement between experiment and theory.


Accessibility Of Home Blood Pressure Monitors For Blind And Visually Impaired People, Mark M. Uslan, Darren M. Burton, Thomas E. Wilson, Steven Taylor, Bruce S. Chertow, Jack E. Terry Feb 2014

Accessibility Of Home Blood Pressure Monitors For Blind And Visually Impaired People, Mark M. Uslan, Darren M. Burton, Thomas E. Wilson, Steven Taylor, Bruce S. Chertow, Jack E. Terry

Thomas E. Wilson

Background: The prevalence of hypertension comorbid with diabetes is a significant health care issue. Use of the home blood pressure monitor (HBPM) for aiding in the control of hypertension is noteworthy because of benefits that accrue from following a home measurement regimen. To be usable by blind and visually impaired patients, HBPMs must have speech output to convey all screen information, an easily readable visual display, identifiable controls that are easy to use, and an accessible user manual. Methods: Data on the physical aspects and the features and functions of nine Food and Drug Administration-approved HBPMs (eight of which were …


Superlattice Ultrasonic Generation, Thomas E. Wilson, M. Oehme, E. Kasper, H-J. L. Gossmann Feb 2014

Superlattice Ultrasonic Generation, Thomas E. Wilson, M. Oehme, E. Kasper, H-J. L. Gossmann

Thomas E. Wilson

We report the first experimental evidence for the resonant excitation of coherent high-frequency acoustic phonons in semiconducting doping superstructures by far-infrared laser radiation. After a grating-coupled delta-doped silicon doping superlattice is illuminated with ~1 kW/mm2 nanosecond-pulsed 246 GHz laser radiation, a delayed nanosecond pulse is detected by a superconducting bolometer at a time corresponding to the appropriate time-of-flight for ballistic longitudinal acoustic phonons across the (100) silicon substrate. The absorbed phonon power density in the microbolometer is observed to be ~10 μW/mm2, in agreement with theory. The phonon pulse duration also matches the laser pulse duration. The absence of any …


Progress On: “Coherent Terahertz Acoustic Phonon Scattering: Novel Diagnostic For Erosion In Plasma Thruster Discharge Chamber Walls", Thomas E. Wilson, Iain D. Boyd Feb 2014

Progress On: “Coherent Terahertz Acoustic Phonon Scattering: Novel Diagnostic For Erosion In Plasma Thruster Discharge Chamber Walls", Thomas E. Wilson, Iain D. Boyd

Thomas E. Wilson

The study is based on the success in obtaining the first experimental evidence for the direct excitation of coherent nanosecond-pulsed high-frequency acoustic phonons in semiconducting doping superstructures by electromagnetic fields of the same frequency. Acoustic phonons are detected by a superconducting bolometer, with nanosecond resolution, at the appropriate time-of-flight across a (100) silicon substrate for ballistic longitudinal phonons when a silicon delta-doped doping superlattice is illuminated with grating-coupled nanosecond-pulsed 246-GHz laser radiation with an approximate power density of 1 kW/mm2. The absorbed phonon power density in the bolometer detector is estimated to be 10 μW/mm2, in agreement with theory. The …


Fabrication Of Robust Superconducting Granular Aluminium/Palladium Bilayer Microbolometers With Sub-Nanosecond Response, Thomas E. Wilson Feb 2014

Fabrication Of Robust Superconducting Granular Aluminium/Palladium Bilayer Microbolometers With Sub-Nanosecond Response, Thomas E. Wilson

Thomas E. Wilson

We provide a convenient recipe for fabricating reliable superconducting microbolometers as acoustic phonon detectors with sub-nanosecond response, using imagereversal optical lithography and dc-magnetron sputtering, and our recipe requires no chemical or plasma etching. Our approach solves the traditional problem for granular aluminium bolometers of unreliable (i.e., non-Ohmic) electrical contacts by sequentially sputtering the granular aluminium film and then a palladium capping layer. We use dc calibration data, the method of Danilchenko et al. [1], and direct nanosecond-pulsed photoexcitation to obtain the microbolometer’s characteristic current, thermal conductance, characteristic relaxation time, and heat capacity. We also demonstrate the use of the deconvolution …


Shaping Carbon Nanotube Forests For Field Emission, Ben Pound Dec 2013

Shaping Carbon Nanotube Forests For Field Emission, Ben Pound

Ben Pound

No abstract provided.


Xena: An Automated 'Open-Source' 129xe Hyperpolarizer For Clinical Use, Panayiotis Nikolaou, Aaron M. Coffey, Laura L. Walkup, Brogan M. Gust, Nicholas Whiting, Hayley Newton, Iga Muradyan, Mikayel Dabaghyan, Kaili Ranta, Gregory D. Moroz, Matthew S. Rosen, Samuel Patz, Michael J. Barlow, Eduard Y. Chekmenev, Boyd M. Goodson Dec 2013

Xena: An Automated 'Open-Source' 129xe Hyperpolarizer For Clinical Use, Panayiotis Nikolaou, Aaron M. Coffey, Laura L. Walkup, Brogan M. Gust, Nicholas Whiting, Hayley Newton, Iga Muradyan, Mikayel Dabaghyan, Kaili Ranta, Gregory D. Moroz, Matthew S. Rosen, Samuel Patz, Michael J. Barlow, Eduard Y. Chekmenev, Boyd M. Goodson

Nicholas Whiting

Here we provide a full report on the construction, components, and capabilities of our consortium’s “opensource”
large-scale (~1 L/h) 129Xe hyperpolarizer for clinical, pre-clinical, and materials NMR/MRI (Nikolaou et al., Proc. Natl. Acad. Sci. USA, 110, 14150 (2013)). The ‘hyperpolarizer’ is automated and built mostly of off-the-shelf components; moreover, it is designed to be cost-effective and installed in both research laboratories and clinical settings with materials costing less than $125,000. The device runs in the xenon-rich regime (up to 1800 Torr Xe in 0.5 L) in either stopped-flow or single-batch mode—making cryo-collection of the hyperpolarized gas unnecessary for many applications. …