Sustainability Commons^™

Exploring Regenerative Vegetable Systems On The Central Coast Of California, Una S. O'Connell

Master's Theses

As climate change and current agricultural practices place pressure on the long term sustainability and resilience of food production systems, there is growing interest in whether existing agricultural systems can adapt to maintain productivity while improving environmental outcomes.

This study evaluated the effects of regenerative versus standard organic vegetable production systems on yield, insect communities, and weed suppression across three field trials conducted on California's Central Coast. In addition, I collected baseline soil health data for all trials. Trials 1 and 2 were carried out at the Cal Poly San Luis Obispo Organic Farm using cabbage and broccoli as cash …

Ecological Footprint Analysis Of Chatgpt (Gpt-3), Isabella Boulais

Computer Science and Software Engineering

Climate change is an escalating crisis that demands immediate action from all sectors, including the rapidly advancing field of artificial intelligence (AI). While AI offers climate solutions, its own environmental impact raises concerns. Unfortunately limited research due to rapid development, system complexity, and lack of standardized methodologies hinders our understanding of AI’s environmental consequences. This project aims to conduct a comprehensive ecological footprint analysis of OpenAI’s GPT-3 model that is used to power ChatGPT, establishing guidelines for assessing AI systems’ environmental impact and proposing a framework for improvement. Going beyond tracking carbon emissions, this project will outline the broader lifecycle …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

Investigation Of Temperature, Solution Strength, And Applied Stress Effects On Cation Exchange Processes In Different Geosynthetic Clay Liner Products, Kendra Fuller

Master's Theses

An extensive laboratory test program was conducted to analyze and compare the cation exchange processes in three different varieties of sodium bentonite (Na-B) geosynthetic clay liners (GCLs) over increased conditioning durations up to 32 days and investigate the effects of temperature, solution strength, and applied stress. The goal of this test program was to establish whether the variables of temperature, solution strength, and applied stress improved or degraded the engineering properties of GCLs in laboratory testing and municipal solid waste (MSW) landfill applications. The GCLs were conditioned in liquids of increasing ionic strength, using deionized water and 2, 50, and …

A Screening Life Cycle Analysis Of One-Way And Reusable Crate Designs – Estimating Environmental Impacts Via Lca Software, Nicolas R. Corona

Master's Theses

A comparison analysis conducted via COMPASS life cycle analysis software has indicated that a one-way crate design, rather than a reusable crate design, is in fact the more environmentally friendly packaging system. These results can be interpreted differently, however, as the manufacturer of said crate designs must confirm what impact indicators they would like to reference as environmental goalposts. The conducted analysis provides insight into what the environmental impacts of each packaging system look like as packaging at all three system levels has been identified as a means of reducing environmental impacts globally. As such, the manufacturer of said crate …

Santa Maria Climate Action Plan Recommendations: Building Energy And Transportation, Thomas Zimmerman, Elena Blewett

City and Regional Planning

The Santa Maria Climate Action Plan Recommendations addresses GHG emissions reduction for the largest sectors in the City of Santa Maria- Building Energy and Transportation. The project includes GHG forecasts and reduction targets from the City’s Draft 2020 Community-Wide Greenhouse Gas Inventory Report. The reduction targets are met through a series of actionable measures to help the City meet aggressive reduction targets by 2030 and 2045.

Pumping-Induced Drawdown Of Streams In Proximity To Agricultural Wells, Sara Alina Sternberg

Master of Science in Environmental Sciences and Management Projects

In the context of unprecedented drought and aquifer overdraft in California, understanding surface water and groundwater connectivity have become increasingly important. While there is a clear understanding of how wells induce drawdown in aquifers (Theis, 1935; Hantush, 1965), secondary effects on local streams have not fully been considered. Current mathematical models targeting aquifer drawdown do not address stream drawdown response in aquifer-stream systems with strong connectivity; instead, they assume the stream to be a constant head boundary. In the drought-stricken and summer-dry climate of California, streams often run dry for months out of the year, which is currently not reflected …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Xylitol As A Phase Change Material: Exploring The Replacement Of Erythritol By Xylitol As A Phase Change Material, Elsa C. Micklin

Physics

To circumvent the cost and environmental damage associated with batteries, phase change materials have been employed in solar cookpots to enable cooking in unfavorable weather conditions. Researchers at Cal Poly have traditionally employed the sugar alcohol erythritol as a PCM due to its high latent heat and a fusion point above the boiling point of water, but have discovered issues with the polyol’s degradation over extended periods of cycling. This paper explores the viability of erythritol’s sister-compound xylitol as a PCM in insulated solar-electric cookers, or ISECs. An ISEC was constructed with a xylitol PCM, and the data collected from …

Analysis And Installation Of A Demonstration Agroforestry Orchard For Californian Mediterranean Plant Communities, Brandon Hurd

Master of Science in Environmental Sciences and Management Projects

Climate-appropriate agroforestry can provide low-input food security and ecosystem services for local Californian Mediterranean climates, while conserving natural resources (e.g., water, nitrogen, etc.). This project showcases a variety of agroforestry methods for five common plant communities of California and other analogous Mediterranean climates at the CAFES Experimental Farm on the campus of Cal Poly San Luis Obispo. Plant community species and their ethnobotanical uses were analyzed to mimic and incorporate aspects of native flora. Agricultural plants were also characterized to represent each of the five selected plant communities. GIS was used to assess the project site for soil, slope, and …

Precious Plastics - Plastic Brick Machine Fabrication, Timothy Ukaobasi Kanu, Evi Paraskevi Troulis

Architectural Engineering

The goal of this research is to determine the structural parameters of the recycled plastic polypropylene when molded into bricks resembling CMU blocks. To accomplish this, three mechanisms had to be assembled: the shredder, the injector, and the 1x1 mold. A tensile and compression test were to be performed on the plastic brick, and the values would be used to compare the tensile and compressive strength of PP plastic bricks, as well as their modulus of elasticity and stress vs. Strain performance. These values would be analyzed to determine whether it would be feasible to build an entire plastic wall. …

Building Structures From Mycelium, Noah M. Brown

Physics

The purpose of this project was to develop a method for creating bricks from mycelium and agricultural waste. The bulk of the research happened in two parts, the first part being a period in which different substrates, strains, and methods were used build the bricks. This research took place in San Luis Obispo and was aided by a group of students in PSC392 under Dr. Pete Schwartz in early 2022. After developing a method for constructing these bricks, the research was moved to St. Thomas, Jamaica, in collaboration with an ecovillage called The Source Farm from July to September. The …

Rainwater Catchment System Designed For California Polytechnic State University Building 34, Jonah S. Aere

Construction Management

California Polytechnic State University currently receives its water supply from either Whale Rock Reservoir, for distilled water, or pumped from six ground wells, for agricultural use. Although the university’s Agricultural College requires a certain amount of water to grow crops, these demands are often not met due to the lack of water within these underground wells. A rainwater capture system could be constructed to ease the water supply burden which is already depleting, reduce wasted drainage, and maintain a sustainable agricultural water source without being dependent on other locations. This would benefit the institution by reducing imported water thereby saving …

Developing Positive Thermal Coefficient (Ptc) Heaters For Solar Electric Cooking, Katarina Ivana Brekalo, Andrew Shepherd

Physics

Positive Thermal Coefficients, PTCs, are materials that abruptly change in resistance in response to changes in temperature. The purpose of this experiment is to explore the viability of using the switching type ceramic PTC thermistor as a replacement for current resistive heaters. These types of PTCs have a nonlinear change in resistance with increases in temperature. This device will be used as a temperature-controlling heating element intended to power an Insulated Solar Electric Cooker (ISEC). The ISEC is designed to cook meals throughout the day for impacted communities as an alternative cooking method that doesn’t require biofuel as an energy …

Solid Thermal Storage As An Energy Storage Device In Insulated Solar Electric Cookers: Thermal Modeling And Experiment, Michael Antonio Fernandez

Physics

The use of solid thermal storage (STS) as an energy storage device in insulated solar electric cookers (ISEC) was explored using a thermal simulation before retrofitting an existing cooker without energy storage and testing it under several conditions. STS sizing, material selection, and geometry were examined from both theoretical and practical perspectives and re-examined following experimental results. Characterization of the system’s thermal interfaces and methods to improve their thermal conductivities were investigated resulting in several performance enhancements to the system.

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Electrochromic Windows: Return On Investment Analysis, Thomas Michael Caprio

Construction Management

In recent years, sustainability in construction has become a topic of undeniable interest. With sustainability certifications becoming more prominent and desirable, members of the construction industry have begun to seek alternatives for standard systems to keep up with market trends. One of the main issues that the construction industry faces is accessibility of technology. While there are new products and technologies being released frequently, members of the construction industry lack knowledge on the specific details and implications of working with newer systems. One piece of technology that was recently introduced is electrochromic glass, or smart glass. Electrochromic windows analyze sunlight …

Bioplastics In The Consumer Market, Elena Strom

Master of Science in Environmental Sciences and Management Projects

The global production and mismanagement of plastic has led to plastics deposited and scatted across marine environments. Conventional plastic, which most Americans encounter every day, is produced from fossil fuels and lacks the ability to fully break down upon disposal, breaking down into microplastics that can remain in the natural environment for hundreds of years. Moving away from petroleum-based plastics could lead to a reduction in greenhouse gas emissions and decrease plastic particles in the ocean. Based on existing literature, there are three biopolymers that could serve as replacements to conventional plastics in the marketplace. These biopolymers are seen as …

Climate Adaptation And Water Conservation Decision-Making In Paso Robles, California Vineyards, Christopher R. Klier

Master's Theses

This paper examines vineyard perceptions and adoption of climate change adaptation and water conservation measures in the Paso Robles American Viticultural Area (AVA). A survey was distributed to all 220 vineyards and vineyard management companies that operate in the AVA, with a 53.64% response rate. The objective of the survey was to determine vineyard manager and owner attitudes towards climate change and adaptation, as well as their perceptions of how these threats would impact their operation. A second objective was to document the current level of water conservation and climate adaptation while identifying the barriers and opportunities for further adoption …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Viable Renewable Energy Sources And Storage For The Retired Power Plant In Morro Bay, Ca, Teresa Netro

Physics

This project will investigate renewable energy production and storage options possible for the Morro Bay Power Plant and provide a recommendation for the energy portfolio of the renovated site. These suggestions can be tested at the Morro Bay facility before being extended to the nearby Diablo Nuclear Power Plant.

Valorization Of Carrot Processing Waste, Alexandra M. Duval

Master's Theses

Commercial carrot processors produce up to 175,000 tons of carrot waste annually. Carrot Mash (CM) is the term referring to the waste by-product of peeled baby carrot processing. Transportation of carrot processing waste is expensive due to its high- water content (approx. 83-95%). High in bioactive compounds (carotenoids) and dietary fibers, it is expected that its conversion into a value-added by-product is of interest to the carrot processing industry. Hemicellulose-rich plant materials have proven to be a source of oligosaccharides, which are known for their beneficial prebiotic activity. The objectives of this research were to: 1) determine the effect of …

Effectiveness Of Windrow Composting Methodology In Killing A Thermo-Tolerant Species Of Salmonella During Mortality Composting, Spencer Gabriel Myers

Master's Theses

In a large agricultural operation, such as the one at Cal Poly San Luis Obispo, disposal of deceased animals is an immense issue. The cost of transporting and rendering every dead animal is inhibitory to the general function of the agricultural operations and their thin budget. Therefore, we propose that composting mortalities could be an economical alternative. Composting is a recognized method for taking animal waste products along with carbon waste and turning it into a pathogen-free, nutrient-rich topsoil. Carcass composting is in fact performed in other countries and states to varying degrees of success. However, the California EPA limits …

Looking Toward The Future: The Value Of Geothermal Energy In The United States Power Market, Reilly R. Moran

STAR Program Research Presentations

States are creating renewable portfolio standards (RPSs) that require utilities to run off a certain percentage of renewables. With the new RPSs and current emission standards the dynamic of the grids energy and reliability needs are changing. Because RPSs and emission standards, utilities are procuring the cheapest renewable resources, which tend to be solar and wind. As RPSs increase over time this causes higher procurements of solar and wind. Higher procurement and increasing penetration levels of solar and wind is causing their energy values to decrease as well as some reliability concerns. While geothermal energy value will continue to stay …

Agriculture In The Classroom Farm Day Lesson Plan, Tessa Nicole Thompson

Agricultural Education and Communication

Nontraditional educational programs have been proclaimed desirable by many teachers, and proven effective through data collection and feedback (Coombs and Ahmed, 1974). Of the more popular unconventional educational programs, outside learning activities are commonly implemented as they are not only advantageous to students, but to teachers as well (Cengelci, 2013; Knoblock, 2008). Though nontraditional, much thought must be put into creating lesson plans for these educational programs.

El Dorado County’s Agriculture in the Classroom program utilizes nontraditional outdoor learning activities to conduct “Farm Day.” This lesson plan, created for Farm Day, is to teach third graders the importance of composting …

Investigation Of Peltier Devices For Refrigeration, Evan C. Drake

Physics

The purpose of our project was to characterize Peltier devices and determine if they were good candidates toward inexpensive off-grid solar powered refrigeration in poor countries. We measured the rate of cooling with a constant temperature thermal sink for different current inputs. Through numerous experiments we calculated the coefficient of performance for two different thermoelectric coolers (TECs) through a range of temperature differentials. In addition, we found the lowest temperature these Peltier chips could reach so that we could test the accuracy of the information provided by the manufacturers spec sheets. Overall the data gathered through our research is compelling …

A Geospatial Assessment Of Social Vulnerability To Sea-Level Rise In Coastal San Luis Obispo, Jesse A. Carpentier

Master's Theses

This project is an assessment of social vulnerability to sea-level rise in the unincorporated coastal area of the County of San Luis Obispo (County) using geospatial and statistical analysis. The intention of this assessment is to inform local climate adaptation efforts now required by state legislation. A social vulnerability index was generated at the Census block group level using 32 variables positively correlated with social vulnerability. The social vulnerability score for each block group is the sum of scores generated for the following principle components: (1) race/ethnicity and disability status, (2) social isolation and age, (3) income, and (4) housing …

Characterization Of S-Swcnt/Pf-Pd Dispersions And Networks, Tamara N. El-Hayek Ms., Jeffrey Blackburn, Andrew Ferguson, Tammy Pheuphong

STAR Program Research Presentations

Single-Walled Carbon Nanotubes (SWCNTs) are being investigated for their use in a wide variety of renewable energy applications. Their unique physical properties contribute to desirable traits such as a high carrier mobility, strong optical absorption and tunable electronic band gap. Unfortunately, due to variability in certain parameters, SWCNTs are limited in their application. The major drawback is that SWCNTs are variable in size and type and typical synthetic methods are not selective. As a result, selective methods must be developed in order to sort these tubes and extract those which are desirable for a particular application. Though there are several …

Testing Predictions Used To Build An Agrivoltaics Installation On A Small-Scale Educational Model, Katie Kinney, Rebecca Minor, Greg Barron-Gafford

STAR Program Research Presentations

Models are valuable tools for explaining and testing systems. Small-scale models can be especially useful for educational purposes. For models to be useful, they have to accurately depict the larger system that they are describing. A novel man-made system, known as an agrivoltaic structure, is being constructed at Biosphere 2 near Oracle, Arizona. The word agrivoltaic is a combination of agriculture and photovoltaics, or solar farming. My research involved creating a small-scale version of this system for educational purposes. The model of this system tested two predictions: that plants will grow better in the shade of a panel and that …