Sustainability Commons^™

Prediction Of Crack Width Of Drilling Fluid Leakage Based On Neural Network, Wang Jian, Xu Jiafang, Zhao Mifu, Wang Bowen, Wang Yahua, Chen Jie, Wang Xiaohui, Yang Gang, Ma Tengfei

Coal Geology & Exploration

During the drilling, it is difficult to select the appropriate leakage prevention and plugging methods and materials as the development of reservoir fractures is unknown. Herein, a reservoir crack width prediction method based on neural network was proposed with reference to the actual history data of wells. Firstly, the main influencing factors of reservoir fracture width were explored and ranked by correlation analysis, and seven main influencing factors, including pump pressure, drilling fluid displacement and drilling speed, were selected as the input parameters. The rate of convergence of the model was improved using the additional momentum algorithm and the variable …

Design Of Attitude Monitoring System For Directional Drilling Continuous Coring Tools, Lin Tingting, Liu Zekai, Ma Yinlong, Zhu Jinbao

Coal Geology & Exploration

Directional drilling continuous coring, as an emerging geological exploration technique, holds vast potential in the field of mineral resource exploration. To facilitate the development of directional continuous coring tools with proprietary intellectual property rights, an attitude monitoring system based on attitude sensing and wireless communication technology was designed in this paper. Concerning the hardware system design, the MPU9250 attitude sensor and STM32F103C8T6 main control chip were adopted to monitor the attitude change of drilling tools, where the communication through geological layers was achieved using a LoRa wireless module. Additionally, to accommodate the structural of the drilling tool and the requirements …

Tracking Control Of Drilling Robot Feed Force Based On An Equivalent-Input-Disturbance, Li Wangnian, Lu Chengda, Zhang Youzhen, Song Haitao, Tian Shengnan, Huang Hengyu, Chen Luefeng, Wu Min

Coal Geology & Exploration

During the underground construction of gas extraction hole in coal mine, the feeding system of drilling robot is used for pressurization, decompression and feeding in drilling process. In view of the problem that the uncertain disturbance of complex strata affects the working performance of drilling robot and the quality and efficiency of drilling construction, the structural composition and drilling construction technology of drilling robot were analyzed at first. The mathematical model of pressure reducing valve control was established according to the working principle of its feed system, and the mapping relationship between the control input, the electromagnet current, and the …

Mining-Induced Shear Deformation And Permeability Evolution Law Of Crushed Rock Mass In Fault Zone, Li Qiang, Ma Dan, Zhang Jixiong, Liu Yong, Hou Wentao

Coal Geology & Exploration

To explore the mechanism of water inrush induced by fault activation under mining, experimental studies were conducted on the shear deformation and permeability evolution of crushed rock mass in fault zone. Specifically, a set of compression-shear-seepage test system for crushed rock mass was designed according to the principle of fluid-solid coupling, with the coupling process of shear deformation and seepage realized. On this basis, the shear-seepage coupling test was carried out for the crushed rock mass under the influence of multiple factors. Thus, the influence of particle size distribution and initial porosity of crushed rock mass on porosity and permeability …

Stimulation Effect Of Pulsed Ultrasonic Excitation On Coal Pores With Full-Scale Pore Sizes, Lin Haifei, Qiu Yue, Han Shuangze, Gao Haidong, Yang Erhao, Wang Ruizhe, Yan Min

Coal Geology & Exploration

This study aims to further investigate the stimulation effect of pulsed ultrasonic excitation on coal pore structures. Using an ultrasonic excitation test system for gas-containing coals, this study conducted ultrasonic excitation tests on coals under continuous and interactive pulses with ultrasonic power of 800 W and 1000 W. Through low-pressure CO₂ adsorption tests, low-temperature nitrogen adsorption tests, and the mercury injection capillary pressure (MICP) tests, this study explored the evolutionary patterns of parameters of various coal pores with full-scale pore sizes, including macropores (> 50 nm), mesopores (2‒50 nm), and micropores (< 2 nm). The test results are as follows: (1) Pulsed ultrasonic waves can expand coal pores. The pore volume of coals was primarily provided by micropores and macropores, with mesopores representing a small proportion. The specific surface area of various coal pores was in the order of micropores > mesopores > macropores. (2) Compared with those having …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Sealing Performance Analysis And Structure Optimization Of Pressure-Preserved Controller For Pressure-Preserved Coring In Deep Coal Mine, Wang Tianyu, Li Jianan, Zhang Yiwei, Li Ju, Xie Heping

Coal Geology & Exploration

As the pressure-preserved controller is a core component of the deep coal in-situ pressure-preserved coring device, its sealing design plays a decisive role in the effect of pressure-preserved coring. In order to obtain the optimal sealing structure, a two-dimensional axisymmetric nonlinear contact model was established for the sealing structure of the pressure-preserved controller. On this basis, the effects of different groove design, cone angle selection and friction coefficient on the sealing performance were analyzed by orthogonal test method. Meanwhile, the stress changes of the sealing ring under different closing stages and medium pressures were studied. The results show that: the …

Pressure Relief Mechanisms And Effects Of Liberation Seam Mining In 1000-M-Deep Coal Mines: A Case Study Of The Huafeng Coal Mine In Tai’An, China, Gao Yanan, Zhang Yao, Zhang Defei, Zhang Yudong, Zhao Weidong, Yu Liyuan

Coal Geology & Exploration

Liberation seam mining serves as an important approach to the prevention of deep dynamic disasters such as coal and gas outbursts, as well as rock bursts. Based on the Nos. 2613 and 2412 mining faces of a 1000-m-depth coal mine in the Huafeng Coal Mine in Tai’an, Shandong, this study investigated the engineering scientific issues such as the pressure relief mechanisms and effect evaluation of liberation seam mining through physical and numerical simulations. As a result, it determined the movement law of overburden strata and the characteristics of underground pressure after the mining of the liberation seam and ascertained the …

R&D And Experimental Research Of Pressure-Preserved Triggering Device For Horizontal Pressure-Preserved Coring In Coal Mines, Huang Wei, Chen Ling, Li Jianan, Fan Dong, Yang Mingqing, Liu Guikang, Xu Qing, Ma Changliang

Coal Geology & Exploration

Gas content is an important evaluation index of safe coal mining, as well as the exploitation and utilization of coalbed methane resources. Pressure-preserved coring is an effective way to improve the measurement accuracy of gas content in coal seams. Aiming at the special operating conditions of horizontal pressure-preserved coring in coal mines and based on the principle and technology of pressure- and gas-preserved coring in coal mines, this study developed a pressure-preserved triggering device and systematically designed the key components of the device, such as the sealing and pressure-preserved unit, the hydraulic drive module, and the salvager-unstuck mechanism between the …

Principle And Technology Of In-Situ Magnetically Controlled Multidirectional Pressure-Preserved Coring In The Coal Mine, Liu Guikang, Li Cong, You Zhenxi, Hu Yunqi, Huang Wei, Wang Ruize, Xu Meng

Coal Geology & Exploration

Obtaining the in-situ physical and mechanical parameters of coal-rock mass is the primary task for the development of deep coal resource. Accurate measurement of the in-situ parameters of gas is the basic guarantee to realize the safe mining of coal. In view of the technical challenges of inaccurate measurement of in-situ gas parameters in coal mine, the idea of multi-directional pressure-preserved coring technology based on magnetic force control was proposed with consideration to the technical characteristics of coring in underground coal mines. Specifically, a self-triggered magnetically controlled pressure-preserved controller was designed based on the characteristics of the composite magnetic field. …

Simulation Optimization And Applications Of Pressure-Preserved Triggering Device For Coring In Deep Coal Mines, Shi Xiaojun, Li Minghui, Liu Guikang, You Zhenxi, Guo Lihua, Hou Lele, Zhao Xiang

Coal Geology & Exploration

The pressure-preserved controller is the core component of pressure- and gas-preserved coring equipment used in deep coal mines. Its pressure-preserved capability and sealing performance are the key to pressure- and gas-preserved coring technology. Given that the existing pressure-preserved controller exhibits low initial sealing specific pressure and poor sealing performance when its initial sealing force is provided only by gravity, this study innovatively designed a pressure-preserved triggering device for coring, aiming to provide initial sealing specific pressure required for the sealing of the pressure-preserved controller. Then, this study conducted numerical simulations of the operating process of the triggering device using the …

Development Of Self-Locking Transfer Mechanism For Coal Samples From Pressure-Preserved Coring In Deep Mining, Zhu Pengfei, Li Jianan, Li Ju, Fu Chenghang, Ye Banghua

Coal Geology & Exploration

Pressure-preserved coring technology can directly store the collected deep coal samples at the bottom of the hole, so as to minimize the gas loss during the coring process. Besides, pressure transfer and testing of the pressure-preserved rock core is a technical prerequisite for the accurate determination of gas content. Then, how to achieve the precise docking from pressure-preserved coring to pressure transfer and testing has become a key technical difficulty that needs to be overcome urgently. Therefore, the research was carried out around the self-locking transfer mechanism, which is the core component of the docking transfer between the pressure-preserved coring …

Closure Trajectory Model Of Pressure-Preserved Controller For Coring In Coal Seam Surface Well, Guo Da, Zhang Yiwei, Wang Dingming, Fang Xin, Yang Bengao, Guo Lihua, Hou Lele, Zhao Xiang

Coal Geology & Exploration

The traditional method of coal exploration is to obtain coal samples using an open coring tool and estimate the gas loss through theoretical calculations. However, the measured gas content of these coal samples is generally low, significantly impeding the development and utilization of coalbed methane and compromising the safety of coal mining operations. To meet the demands of deep coal exploration, an innovative pressure-preserved coring tool was specifically designed for the coal seam surface wells. This tool has a total length of 6.7 m and can extract a 3 m long pressure-preserved coal core sample at a single time. In …

Fractal Theory-Based Permeability Model Of Fracture Networks In Coals, Xia Binwei, Liao Chuanbin, Luo Yafei, Ji Kainan

Coal Geology & Exploration

Fractures in coal reservoirs, which act as the major seepage pathways for coalbed methane (CBM), determine the permeability and CBM productivity of coal reservoirs. Research on the relationships between fracture structures and reservoir permeability is of great theoretical and practical significance for the accurate prediction of CBM productivity. Based on the classical cubic law-based permeability model, as well as the fractal theory, fracture network structures, and effective stress, this study built a permeability model containing complex bending fractures, which was then combined with the S & D (Shi-Durucan) model to build the permeability model of fractured coals under the action …

A Method For Classification Of Surrounding Rock Based On The Excavatability Performance And Adaptability Of Tunnel Boring Machines And Its Applications, Liu Jiawei, Zhang Sheng, Chen Zhao, Yang Zhanbiao, Ji Panjun, Wei Yonghui

Coal Geology & Exploration

The varying geological conditions of the surrounding rocks of coal mine roadways influence the wide application of full-face rock tunnel boring machines (TBMs). Therefore, accurately assessing the excavatability of rock masses in coal mines and the rock adaptability of TBMs is crucial for the efficient operation of TBMs. Based on the evaluation results of the parameters and excavatability of rock masses, this study built a classification model for rock mass excavatability using the technique for order preference by similarity to ideal solution (TOPSIS). Furthermore, combining the correlation analysis between the [BQ] values of different geological conditions and the utilization ratio …

Drillability And Mechanical Parameters Of Laser Hot Cracking Sandstones, Yang Lei, Yang Bengao, Liu Junjun, Zhou Xuemin, Xie Jing, Wang Chen, Guo Chenchen, Gao Mingzhong

Coal Geology & Exploration

Over recent years, shallow coal resources that can be easily mined have been gradually exhausted. As a result, conventional drilling techniques tend to face challenges such as low rock-breaking efficiency, high drilling costs, and environmental pollution in the exploration and exploitation of deep coal resources. Therefore, there is an urgent need to introduce a new auxiliary rock-breaking technique for drilling. Focusing on the new laser-assisted rock-breaking technology, this study systematically conducted mechanical and drillability tests on sandstones after laser irradiation for different durations, aiming to explore the temporal and spatial evolution of the temperature field of hard sandstones, the propagation …

Physical And Mechanical Properties Of Thermal Insulation Materials For In-Situ Temperature-Preserved Coring Of Deep Rocks, Xue Shouning, He Zhiqiang, Li Cong, Yu Bo, Lu Xuelian, Liu Wenyue, Yang Jianping, Wei Zijie

Coal Geology & Exploration

High temperature affects deep coal mining and other engineering activities. However, conventional coring methods for terrestrial hard rocks lack temperature-preserved measures, ignoring the effects of temperature on the physical and mechanical properties of rocks. Consequently, the parameters obtained are subjected to distortion, affecting the safe and efficient mining of resources such as deep coals. To make breakthroughs in the development of in-situ temperature-preserved coring technologies for deep rocks, this study proposed using the hollow glass microsphere/epoxy resin (HGM/EP) as thermal insulation materials and the physical and mechanical properties. The results are as follows: (1) With an increase in the HGM …

Research Advances On The In-Situ Pressure-Preserved Coring And Gas Parameter Determination For Deep Coal Seams, Xie Heping, Cui Pengfei, Shang Delei, Fan Dong, Chen Ling, Yang Mingqing, Du Lin, Gao Mingzhong

Coal Geology & Exploration

The in-situ gas pressure and content of coal seams are critical for the safe production of deep coal mines and the accurate evaluation of coalbed methane resources. To address the technical challenges of accurately determining in-situ gas content in deep coal seams, this study proposed brand-new principles of in-situ pressure coring and the tests of in-situ gas content and pressure. It also derived a calculation method for in-situ gas content in coal seams and a method for determining the in-situ gas pressure while considering the effects of moisture content and multiple gas components. Given the in-situ stress environment deep in …

A Preliminary Study Of Pressure-Preserved Coring Calculation Principle And Method For In-Situ Pressure In Deep Coal Seams, Cui Pengfei, Gao Mingzhong, Shang Delei, Li Jianhua, Chu Peng, Song Jie, Li Yongcheng, Hao Haichun

Coal Geology & Exploration

The accurate acquisition of in-situ gas pressure in coal seams is a key link in the chain of the prevention and control of gas disasters. Presently, it is still necessary to explore accurate, low-cost, and time-saving methods for determining gas pressure. Based on the in-situ pressure-preserved coring for deep coal seams, this study proposed a calculation method for in-situ gas pressure in deep coal seams and developed the calculation process. Using the constructed numerical model of the gas pressure evolution in the pressure-preserved space, this study verified the reliability of the proposed method by comparison with the theoretical and numerical …

Influence Of Gas Components On The Determination Of Gas Pressure In Coal Seams Under In-Situ Pressure-Preserved Coring, Chu Peng, Shang Delei, Li Jianhua, Ma Shaoming, Zhu Guodong, Cui Pengfei

Coal Geology & Exploration

Determining the pressure and content of coal seam gas based on pressure-preserved coring is an effective method for quickly and accurately calculating gas parameters. Coal seam gas is a multi-component gas mixture dominated by methane. Given that coals show different adsorption capacities for different gases and that the components in the mixed gas exhibit different partial pressures, the proportions of gas components can influence the calculation results of the content and pressure of coal seam gas. To accurately determine the in-situ gas pressure in coal seams based on the pressure-preserved coring, this study investigated the influence of gas components on …

Exploring The Wetting Mechanism Of Surfactants For Coals Based On Molecular Simulations, Tong Yanjun, Yang Zundong, Song Jie, Li Yongcheng, Liu Yiting

Coal Geology & Exploration

With a gradual increase in the depth and mechanization degree of coal mining, secondary explosions of gas and coal dust have become increasingly severe. Chemical dust suppressants such as surfactants can reduce these explosions by effectively inhibiting the generation and diffusion of coal dust. To explore the inhibition mechanism of nonionic surfactants for hydrophobic coal dust, this study analyzed the basic physicochemical properties of typical hydrophobic coal dust at a depth of 1050 m using FT-IR, XRF, and XRD. This study built a molecular structure model of coal dust by combining test techniques such as EA, XPS, and ¹³C …

Remote Sensing And Gis Based Approach To Evaluate The Impact Of Stone Quarrying And Crushing Activities On Land Resources, R. S. Chaurasia, S. N. Mohapatra

Journal of Sustainable Mining

The land is one of the most treasures to support life, like food, fibre, medicine, and minerals, etc. Stone quarrying is one of the key elements which supports socio-economic development and industrial expansion. RS and GIS play an important role in environmental assessment to monitor the stone quarries and related activities for time to time. The present study was carried out to evaluate the impact of stone quarrying and crushing activities (SQCA) on land resources. Therefore, matrix change analysis of 2021, 2015, 2008 and 2003 were used for change detection. High-resolution Google Earth Pro images were used for the assessment …

Predictive Model Of Seismic Vibrations’ Peak Value Induced By Multi-Face Blasting, Krzysztof Fuławka, Lech Stolecki, Piotr Mertuszka, Marcin Szumny, Arkadiusz Anderko

Journal of Sustainable Mining

The seismicity level induced by blasting in the Polish copper mines is very important inlight of the efficiency of active rockburst prevention and safe conduct of blasting operations in the vicinity of the mining infrastructure such as shafts, workings, or function chambers (e.g., workshops, storages, etc.). Knowledge of the seismic vibrations’ peak value might be the basis for designing blasting works in a way that ensures desired seismic effect. However, current experiences show that Peak Particle Velocity prediction models developed so far do not apply to multi-face blasting, where there are many vibrations’ sources at the same time dotted across …

Managing The Rock Mass Destruction Under The Explosion, Maksym Kononenko, Oleh Khomenko, Ivan Sadovenko, Valeriy Sobolev, Yuliya Pazynich, Adam Smoliński

Journal of Sustainable Mining

Using the theory of elasticity and the main provisions of the quasi-static-wave hypothesis of the mechanism of the destruction of a solid medium under the action of an explosion, analytical modelling of the parameters of the formation of crumpling zones and crushing of the rock mass around the charging cavity during its explosive loading was carried out. Analytical models of the radii of the crumpling, intensive fragmentation and fracturing zones formed around the charging cavity in the rock mass during its explosive loading, taking into account the pressure of the explosion products, the limit of tensile-compressive strength of the rocks, …

Application Geological Strength Index (Gsi) Quantification Method On The Characterization Of Carbonate Rock Mass, Singgih Saptono, Danu Mirza Rezky

Journal of Sustainable Mining

Determining GSI as a representation of the presence of rock mass in slope analysis continues to develop. The development of the quantitative GSI method was carried out because the basic (qualitative) GSI values were deemed too subjective so the results from the use of the quantitative GSIwere expected to be more objective and accurate. The method used is to combine 3 GSI quantitative methods to find GSI based on surface conditions and joint structure. The results showed that the Quantitative GSI value was smaller than the GSI predictive value (qualitative). The GSI approach with RQD and UCS parameters is also …

Nickel Recovery From Low-Grade Laterites: Study Of Thermal Pre-Treatments To Improve The Efficiency Of The Hydrometallurgical Process, Johana Borda, Robinson Torres

Journal of Sustainable Mining

The processing of lower-grade laterites to obtain nickel has increased due to the gradual depletion of higher-grade sulphide ore reserves. However, the extraction from laterites has been limited because conventional technologies imply a considerable expense of energy or reagents. In this document, the effect of thermal pre-treatments on a laterite sample is demonstrated to improve nickel leaching under moderate conditions. The influence of agents such as coke, coal and NaCl in the heat treatment was also studied. With the results it is presumed that part of the nickel occluded in the goethite migrates to the iron oxides surface during the …

European Feedback On Post-Mining Seismicity, Isabelle Contrucci, Dalija Namjesnik, Peter Niemz, Paloma Primo, Andrzej Kotyrba, Grzegorz Mutke, Petr Konicek, Pascal Dominique, Tobias Rudolph, Stefan Möllerherm, Jannes Kinscher, Emmanuelle Klein, Simone Cesca

Journal of Sustainable Mining

Following the Paris Agreement adopted in 2015, Europe has committed to reducing its greenhouse gas emissions. In this context, the abandonment of coal as an energy source, both in terms of consumption and production, will lead to the closure of many mines in the years to come.

Mine closure guidelines to manage residual mining risks already exist in European countries. However, they do not include post-mining seismic risk management due to a lack of sufficient studies and knowledge on this subject. After mining closure, the flooding of the mining works leads to hydromechanical loading of the underground and, in the …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Propagation Of Hydraulic Fractures In Thin Interbedded Tight Sandstones, Yang Fan, Mei Wenbo, Li Liang, Sun Zening, An Qi, Yang Qi, Lu Meiquan, Yang Ruiyue

Coal Geology & Exploration

Thin interbedded tight sandstone reservoirs are characterized by strong vertical heterogeneity due to the superimposed pattern of the deposited sandstones and mudstones. As a result, hydraulic fractures are difficult to propagate vertically to effectively connect the reservoirs. Given this, ascertaining the vertical propagation patterns of hydraulic fractures in thin interbeds is of great significance for the development of thin interbedded tight sandstones. With the thin interbedded tight sandstone reservoirs of the lower Shihezi Formation in the Linxing block, Ordos Basin as a case study, this study built the fracture propagation model of these sandstones. Accordingly, it analyzed the effects of …

Iron Occurrence In Coal Measures And Its Release Mechanism During Water-Rock Interactions: Taking A Mine In The Eastern Grassland As An Example, Wang Tiantian

Coal Geology & Exploration

The mine water with iron out of limit corrodes the water distribution pipeline and the industrial equipment, thereby damaging the liver of human body, and further threatening the human health. The enrichment or dilution of iron in mine water is determined by the iron content and its occurrence in coal measures, as well as its release mechanism during water-coal and water-rock interactions. Herein, 18 groups of coal and rock samples were collected from a mine in the eastern grassland, and had the iron content, occurrence and carrier in the coal measure analyzed with an inductively coupled plasma mass spectrometry (ICP-MS), …