Sustainability Commons^™

Examining The Progress In Additive Manufacturing In Supporting Lean, Green And Sustainable Manufacturing: A Systematic Review, Catherine Maware, Rumbidzai Muvunzi, Tinotenda Machingura, Ilesanmi Daniyan

Institute for Sustainable Manufacturing Faculty Publications

The quest for waste reduction and the development of manufacturing processes that meet the economic, social and environmental requirements necessitate this study. Additive manufacturing is an emerging digital technology that can be used to seamlessly develop a product through material deposition in layers. The study aims to investigate the progress made in the development of additive manufacturing to support lean, green and sustainable manufacturing. The study employs a systematic literature review approach, specifically the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). A total of 158 articles identified from different academic databases that detailed empirical, conceptual and theoretical findings …

A Screening Life Cycle Analysis Of One-Way And Reusable Crate Designs – Estimating Environmental Impacts Via Lca Software, Nicolas R. Corona

Master's Theses

A comparison analysis conducted via COMPASS life cycle analysis software has indicated that a one-way crate design, rather than a reusable crate design, is in fact the more environmentally friendly packaging system. These results can be interpreted differently, however, as the manufacturer of said crate designs must confirm what impact indicators they would like to reference as environmental goalposts. The conducted analysis provides insight into what the environmental impacts of each packaging system look like as packaging at all three system levels has been identified as a means of reducing environmental impacts globally. As such, the manufacturer of said crate …

Electric Vehicles Contribute To China's Energy Security And Carbon Peaking And Carbon Neutrality, Jianfeng Guo, Xuemei Zhang, Qi Cao, Fu Gu

Bulletin of Chinese Academy of Sciences (Chinese Version)

The current international situation is complicated and unstable, and China is in the midst of an important economic transition as it deals with the twin concerns of energy security and carbon peaking and carbon neutrality (referred to as dual carbon goals). Although the dual carbon goals aim a strong emphasis on energy security, certain emission reduction strategies will place restrictions on energy security that is directly connected, such as energy supply and grid load, making it challenging to simultaneously fulfill the optimization goal. China now has the task of figuring out how to rationalize and optimize the coordinated promotion of …

Key Elements, Mechanism Analysis And Evaluation Indicators Of Digital And Intelligent Integration Transformation And Development Of Manufacturing Industry, Xiaoqiang Sun, Xiuyun Gao, Yumei Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The digital and intelligent integration transformation of manufacturing industry has become an important driving force for the high-quality development of traditional manufacturing enterprises. This study clarifies the main research context and key issues of scholars on the digital and intelligent integration transformation of manufacturing industry, refines the goals, main elements, and influencing factors of digital and intelligent integration transformation of manufacturing industry, builds a power network model for the transformation and development of digital and intelligent integration of manufacturing industry according to the system feedback principle of system dynamics, analyzes the mechanism of action between various elements of the system, …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Lignin Derived Hydrophobic Deep Eutectic Solvents As Sustainable Extractants, Yuxuan Zhang, Qi Qiao, Usman Lame Abbas, Jun Liu, Yi Zheng, Christopher Jones, Qing Shao, Jian Shi

Markey Cancer Center Faculty Publications

Solvent innovation has become a central task for improving the sustainability of chemical processes1. Deep eutectic solvents (DESs) emerge as environmentally friendly alternatives to toxic and volatile organic solvents. One appealing aspect for DESs is that they can be synthesized using naturally occurring compounds from biomass. Herein, we prepared novel hydrophobic DESs based on lignin derivatives and characterized their physicochemical properties including density, viscosity, and thermal behavior. The results showed that five lignin-derived hydrophobic DESs made from menthol, thymol, and 2,6-dimethoxyphenol were promising as green solvents due to their low viscosities and environmentally friendly constituents. To evaluate the potential application …

Evaluating The Sustainability Of Paper And Plastic Substitute Material Limex, E.-Lexus Thornton, Avery Hartley, Daniel Caudill, Martin Gamesu, Julius M. Schoop, Fazleena Badurdeen

Mechanical Engineering Faculty Publications

With the increasing decline in the environment and natural resources it is important to find new ways in which manufacturing can increase the sustainability of the world. This study seeks to compare LimeX, a state-of-the-art paper and plastic alternative primarily made of limestone, with conventional paper and plastic materials. For a better understanding of LimeX as a material, a brief investigation of the mechanical and chemical properties will be performed through experimentation and analysis. In addition, this paper aims to evaluate the sustainability of LimeX through the analysis of metrics relating to the triple bottom line (environmental impacts, economic impacts …

Classifying Multi-Generational Products For The Circular Economy, Buddhika M. Hapuwatte, Fazleena Badurdeen, I. S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Manufacturers are increasingly interested in the circular economy (CE) and potential of circular productions. To fully utilize CE, better guidance at the design stage is needed to establish closed-loop flows and prioritize higher value retaining end-of-use (EoU) practices such as reuse and remanufacture (i.e., parts harvesting). Intergenerational commonality (IC) is a method to increase EoU parts harvesting. However, closed-loop parts harvesting potential depends on the compatible timing between design generations’ production and EoU returns curves. Therefore, in this paper, we explore an approach to make an initial assessment on where IC as a closed-loop CE strategy can produce most benefit, …

Coconut Shell Waste Treatment Technology For A Sustainable Waste Utilization: A Case Study Of The Smes In Bohol Village, Indonesia, Wahyu Anggo Rizal, Ria Suryani, Roni Maryana, Dwi Joko Prasetyo, Diah Pratiwi, Yuli Ary Ratnawati, Dini Ariani, Andri Suwanto

ASEAN Journal of Community Engagement

This project focused on the introduction of liquid smoke and bio briquette manufacturing technology to small and medium enterprises (SMEs) located in Bohol Village, Gunungkidul, Indonesia through technology transfer, training, and mentoring. These SMEs are engaged in the food business with the main product jenang ketan, a traditional food from Gunungkidul, especially in Rongkop District, and very popular among communities around and outside Gunungkidul. The traditional preparation of jenang ketan produces several by-products in the form of waste, which is dominated by coconut shell biomass. The project’s technology transfer was carried out through the procurement of a series of pyrolysis …

Removal Of Selenium And Heavy Metals From Coal Combustion Residuals Wastewater Using Surface Modified Iron Based Media, Madan Tandukar, Alex Korff, Andrew Vincent, Chris Hardin

World of Coal Ash Proceedings

No abstract provided.

Solid Thermal Storage As An Energy Storage Device In Insulated Solar Electric Cookers: Thermal Modeling And Experiment, Michael Antonio Fernandez

Physics

The use of solid thermal storage (STS) as an energy storage device in insulated solar electric cookers (ISEC) was explored using a thermal simulation before retrofitting an existing cooker without energy storage and testing it under several conditions. STS sizing, material selection, and geometry were examined from both theoretical and practical perspectives and re-examined following experimental results. Characterization of the system’s thermal interfaces and methods to improve their thermal conductivities were investigated resulting in several performance enhancements to the system.

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Ecological Risk Assessment For Coal Combustion Residuals And Herrington Lake Adjacent To The Kentucky Utilities E.W. Brown Generating Station, Mary Sorensen, Alex Smith, Mark Nielsen

World of Coal Ash Proceedings

No abstract provided.

Epri Research On Groundwater-Surface Water Interactions Near Coal Combustion Product Sites, Bruce Hensel, Jeff Thomas, Tim Towey, Anthony Aufdenkampe

World of Coal Ash Proceedings

No abstract provided.

Cqa - A Common Sense Approach At Becoming The Mvp On Your Next Project, James Price, Michael Fisher, John Metcalf

World of Coal Ash Proceedings

No abstract provided.

Challenges & Pragmatic Solutions For The Design And Construction Of A 300-Acre Ccr Landfill Located In The Southwestern Us - A Case Study, Andy Lucas, Jason Pokorny

World of Coal Ash Proceedings

No abstract provided.

State Of The Practice For Compaction Quality Of Dry Stack Ccr Storage Facilities, Bruce Cunningham, Pavana Vennapusa, David J. White, Robert Eric Hageman

World of Coal Ash Proceedings

No abstract provided.

Groundwater Compliance & Strategy Insights For Ccr Rule Stakeholders, Sheryl Smith, Mark Johnson

World of Coal Ash Proceedings

No abstract provided.

Hybrid Closure Approach: Constructing Bidding Lessons Learned, Brian Harthun, P.E.

World of Coal Ash Proceedings

No abstract provided.

Ccr Landfill Construction & Operation Under Subtitle D, Thomas R. Gredell

World of Coal Ash Proceedings

No abstract provided.

Hybrid Closure Approach: Design Investigation Review, Brian Sperrazza, P.E., P.G.

World of Coal Ash Proceedings

No abstract provided.

Geochemical Explanations For Strong Natural Attenuation Of Molybdenum, Selenium, And Lithium In A Groundwater Plume, Jacob Chu, J. P. Brandenburg

World of Coal Ash Proceedings

No abstract provided.

Construction Risk Management Considerations For Ccr Surface Impoundment Closures, John P. Seymour, Chris Robb

World of Coal Ash Proceedings

No abstract provided.

Monitoring Well Integrity And Performance Part Ii - Seeing The Benefits, Bryan R. Hansen, Jacob G. Gruzalski, Thomas S. Dicken, Rock J. Vitale

World of Coal Ash Proceedings

No abstract provided.

Use Of A Net Environmental Benefit Analysis To Evaluate Remedial Options To Address Coal Ash – Case Studies, Joseph Nicolette, Michael Rockel

World of Coal Ash Proceedings

No abstract provided.

Ccr Beneficial Use Data Capture And Reporting, Joe Ploetz, Kevin Foody

World of Coal Ash Proceedings

No abstract provided.

Use Of Tritium-Helium Isotopes For Vertical Delineation Of Ccr Constituents In Groundwater, Lane Dorman, Lauren Fitzgerald, Ryan Fimmen, Robert Trey Singleton

World of Coal Ash Proceedings

No abstract provided.

Building Defensibility For Mna Remedy Selection, Michael Healey, Jeff Roberts, Sarah Cronk, Andrzej Przepiora

World of Coal Ash Proceedings

No abstract provided.