Sustainability Commons^™

Physical Water Scarcity Metrics For Monitoring Progress Towards Sdg Target 6.4: An Evaluation Of Indicator 6.4.2 “Level Of Water Stress”, D. Vanhama, A. Y. Hoekstra, Y. Wada, F. Bouraoui, A. De Roo, Mesfin Mekonnen, W. J. Van De Bund, O. Batelaan, P. Pavelic, W. G.M. Bastiaanssen, M. Kummu, J. Rockström, J. Liu, B. Bisselink, P. Ronco, A. Pistocchi, G. Bidoglio

Daugherty Water for Food Global Institute: Faculty Publications

Target 6.4 of the recently adopted Sustainable Development Goals (SDGs) dealswith the reduction ofwater scarcity. To monitor progress towards this target, two indicators are used: Indicator 6.4.1 measuring water use efficiency and 6.4.2 measuring the level of water stress (WS). This paper aims to identify whether the currently proposed indicator 6.4.2 considers the different elements that need to be accounted for in a WS indicator.WS indicators compare water use with water availability.We identify seven essential elements: 1) both gross and net water abstraction (or withdrawal) provide important information to understand WS; 2) WS indicators need to incorporate environmental flow requirements …

Water Use In Irrigated Agriculture: An Approach To Water Productivity In Drip And Sprinkler Systems, Fernanda Lamede Ferreira De Jesus, Jéssica Garcia Nascimento, Rubens Duarte Coelho, Sergio Nascimento Duarte, Fernando Campos Mendonça

Daugherty Water for Food Global Institute: Faculty Publications

Irrigation plays an important role in agriculture and the increase in the irrigated area and scarce water resources have encouraged the use of irrigation systems and management systems that increase the efficiency of water use. Thus, maximize water productivity has been one of the most important challenges in agriculture. The present study aimed to relate information on water productivity for two irrigation systems, drip and sprinkler systems, with the purpose of understanding the characteristics of these systems and contributing to the advancement of studies and research carried out in the area. Technological innovations aimed at reducing consumption and increasing water …

Improving The Accuracy For The Long-Term Hydrologic Impact Assessment (L-Thia) Model, Anqi Zhang, Lawrence Theller, Bernard A. Engel

The Summer Undergraduate Research Fellowship (SURF) Symposium

Urbanization increases runoff by changing land use types from less impervious to impervious covers. Improving the accuracy of a runoff assessment model, the Long-Term Hydrologic Impact Assessment (L-THIA) Model, can help us to better evaluate the potential uses of Low Impact Development (LID) practices aimed at reducing runoff, as well as to identify appropriate runoff and water quality mitigation methods. Several versions of the model have been built over time, and inconsistencies have been introduced between the models. To improve the accuracy and consistency of the model, the equations and parameters (primarily curve numbers in the case of this model) …

Loss Of Buffer Value Due To Aquifer Depletion: The Case Of High Plains Aquifer, Mani Rouhi Rad, Timothy Foster, Nicholas Brozovic

Daugherty Water for Food Global Institute: Faculty Publications

Existing literature in economics and engineering do not realistically capture the effects of aquifer depletion on loss of profits from agricultural production. While the former literature ignores the physical characteristics of aquifer and the relationship between aquifer levels and groundwater availability, the latter strand of literature does not consider farmers' decisionmaking as a result of aquifer depletion. Misspecification of these relationships and their effect on irrigation decisions can result in misunderstanding the consequences of aquifer depletion and may provide ineffective policies. This paper provides a framework to study the effects of aquifer depletion on the profit of agricultural production. We …

A Comparative Analysis Of Feed And Environmental Factors On Broiler Growth In The United States, Alexandra Gulli

Graduate Theses and Dissertations

Broiler production in the United States has become an important industry within the last half century. As the demand for poultry continues to increase and the concern of climate change also increases, it will become an important part of the industry to become more sustainable. This study uses a feed optimization model, a broiler growth model, and a life cycle assessment (LCA) to determine how feed ingredients and the barn environment can affect the broiler’s growth and production emissions. A multi-criteria ration optimization model is used to produce feeds based on carbon footprint and cost. A growth model is used …

Comparing Building Modeling Software To The Energy Record Of A Preexisting Structure, Nathan Lasley

Mahurin Honors College Capstone Experience/Thesis Projects

Buildings are complex systems - even "simple" residential structures. Many factors go into building energy consumption and the design to reduce it. Computer energy modeling allows the simultaneous consideration and balance of many of those variables. Computer models are only as good as the information provided however. Tools like blower door and duct blaster can be used to aid in verifying the model or to provide more information to build a better model. In order to verify of building computer energy simulation methods, the Western Kentucky University (WKU) Office of Sustainability located at 503 Regents Ave. in Bowling Green KY …

Carbon And Nutrient Balances In Microalgal Bioenergy System, Eunyoung Lee

USF Tampa Graduate Theses and Dissertations

This research investigated life cycle environmental impacts and benefits of an integrated microalgae system with wastewater treatment system using an integrated process modeling approach combined with experimentation. The overall goal of this research is to understand energy, carbon and nutrient balances in the integrated system and to evaluate the environmental impacts and benefits of the integrated system from a carbon, nutrient, and energy perspective. In this study, four major research tasks were designed to contribute to a comprehensive understanding of the environmental and economic sustainability of the integrated system, which included development of an integrated co-limitation kinetic model for microalgae …

Comprehensive Silica Removal With Ferric Compounds For Industrial Wastewater Reuse, Ehren D. Baca

Civil Engineering ETDs

Cooling towers, integrated circuit (IC) manufacture and reverse osmosis (RO) generate copious amounts of wastewater high in colloidal and reactive silica inhibiting on-site or synergistic reuse. Silica present in cooling water can reach solubility limits via evaporation and form impervious scale on heat transfer surfaces that decreases efficiency. When water is treated by RO operating at high rejection, silica forms difficult-to-remove scale on the membrane feed side in the form of glassy patches and communities of aggregate particles, inhibiting aspirations for zero liquid discharge. Current methods for silica scale mitigation include abundant dosing with chemical antiscalents or complex operating schemes. …

Evaluating The Impacts Of Farmers’ Behaviors On A Hypothetical Agricultural Water Market Based On Double Auction, Erhu Du, Ximing Cai, Barbara Minsker

Daugherty Water for Food Global Institute: Faculty Publications

Agricultural water markets are considered effective instruments to mitigate the impacts of water scarcity and to increase crop production. However, previous studies have limited understanding of how farmers’ behaviors affect the performance of water markets. This study develops an agent-based model to explicitly incorporate farmers’ behaviors, namely irrigation behavior (represented by farmers’ sensitivity to soil water deficit k) and bidding behavior (represented by farmers’ rent seeking l and learning rate b), in a hypothetical water market based on a double auction. The model is applied to the Guadalupe River Basin in Texas to simulate a hypothetical agricultural water market under …

2017 Spring Engr333 Project Final Report (Section A), Devin Auld, Scott Bokach, Joshua Bronner, Alex Meador, Ryan Hoek, Robert Lanser, Matthew Lenko, Elliot Slenk, Brendan Biesboer, Kyle Mailhot, Nate Zylstra, Jonah Engel, Rich Floro, Björn Krebs, Ethan Postmus, Cameron Bell, Caleb Bieske, Chris Griffin, Bernice Portugal, Ryan Beezhold, Dillon Carhuff, Ian Mcclaskie, Jared Vanderklay, Rounak Chatterjee, Toby Dalla Santa, Jenny Haney, Joel Hoskins, Caleb Senyshyn

ENGR 333

The objective of ENGR-333-A was to develop a well-defined, bottom-up energy demand model for the energy consumption of the dormitories on Calvin College’s campus for each year of the past decade within an accuracy of ± 2%.

2017 Spring Engr333 Project Final Report (Section B), Daniel Dick, Nathan Swaim, Jonathan Sager, Ellen Reidy, Jordan Swets, Joel Van Dyke, Connor Macdonald, Josiah Markvluwer, Justin Rohlicek, John Lee, Zach Mouw, Daniel Wharton, Sam Hanover, Jay Noyola, Adam Christenson, Scott Stamper, Aaron Tucker, Bethany Waanders, Joel Schaefer, Maddie Collins, Matthew Cok, Philip Kim, Steve Vanden Berg

ENGR 333

The Physical Education Complex is located in the North-end of Calvin College’s campus, and supports many athletic, academic, event and recreational functions. Due to its heavy use, the complex contributes 20% of the College’s electricity consumption. Monetarily, this equated to electricity costs of about $385,000 last year. With these financial implications, the College is searching for ways to reduce the cost. While there is little to no room for electricity cost rate reductions, there is opportunity for improvement through the implementation of more efficient components. However, the sources of electricity demand are largely unknown. Our objective is to develop a …

2017 Spring Engr333 Seminar Presentation, Jonah Engel, Rich Floro, Björn Krebs, Ethan Postmus, Brendan Biesboer, Kyle Mailhot, Nate Zylstra, Ryan Beezhold, Dillon Carhuff, Ian Mcclaskie, Jared Vanderklay, Rounak Chatterjee, Toby Dalla Santa, Jennifer Haney, Joel Hoskins, Caleb Senyshyn, Alex Meador, Scott Bokach, Devin Auld, Joshua Bronner, Elliot Slenk, Matthew Lenko, Robert Lanser, Ryan Hoek, Cameron Bell, Caleb Bieske, Chris Griffin, Bernice Portugal, Sam Hanover, Dan Wharton, Jay Noyola, Zachary Mouw, John Lee, Daniel Dick, Jonathan Sager, Nathan Swaim, Ellen Reidy, Jordan Swets, Joel Van Dyke, Connor Macdonald, Josiah Markvluwer, Justin Rohlicek, Adam Christensen, Scott Stamper, Aaron Tucker, Bethany Waanders, Joel Schaefer, Maddie Collins, Matthew Cok, Philip Kim, Steve Vanden Berg

ENGR 333

File for student presentation, given by students in the Spring 2017 class of ENGR333.

Tailings Dust Emissions, Emily Degner, Sam Horn, Zakary Galligan, Ryan Bernard, Julie Jameson, Josh Mueller, Natalie Tucker, Joe Griffin

Chemical Engineering Undergraduate Honors Theses

Fugitive dust emissions from the storage and handling of mine tailings presents environmental and safety concerns, which must be addressed to promote the land sustainability and the health and safety of individuals around a tailings storage facility (TSF). The investigated dust control methods were agglomeration, binder slurry injection, and topical spray.

The Dust Busters determined that pelletizing was the most practical method of agglomeration. In order to produce durable pellets from the mine tailings, which consist primarily of silica, a binder must be added. A variety of binders were considered including magnesium and calcium chloride, bentonite, barite, cement, vinyl polymers, …

Next Steps For Mentoring Program, Patrick Gray

Sustainability and Connectivity

This file provides a jump-off position for students in the fall 2017 semester who want to continue work toward a mentoring program.

Design Of 3d Macroporous Inverse Opal Tio2 Binary And Ternary Composites Sensitized With Gold Nanoparticles And Cds Quantum Dots For Photocatalysis, Daniel A. Corella

Master of Science in Chemical Sciences Theses

Materials composed of titanium (IV) oxide (TiO₂) have received enormous scientific interest due to titania’s abundance, non-toxicity, and photocatalytic proficiency, however its large band gap limits its applicability under ambient conditions. Various attempts have been made to incorporate titania into composite systems to sensitize it for activity under a broader range of wavelengths. One such method includes utilizing narrow band gap semiconductors to form an electron transfer process analogous to photosynthesis referred to as a Z-scheme. Z-scheme systems can catalyze the decomposition of aqueous pollutants via generation of reactive oxygen species after input of sunlight. This work reports …

Mapping And Integrating Value Creation Factors With Life-Cycle Stages For Sustainable Manufacturing, P. Bilge, S. Emec, G. Seliger, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Instead of implementing each element individually, engineers must be aware of multiple interactions among all major value creation factors and their life-cycle stages. Interactions are analyzed by a set of factors and hierarchical levels within a production system based on empirical observations and described in analytical models. Such analyses and missing information about the current condition of the system and its parts remain limited to addressing specific aspects of interactions among factors and stages for multiple decision making. To build a case-based scope addressing the interactions among a set of factors and life-cycle stages, a comprehensive approach for mapping and …

Contacts, Timothy Leonard, Abby Lisjak, Adam Foster

Sustainability and Connectivity

This a contact sheet of every group that the mentoring group has reached out to. There are no emails or phone numbers provided. If you would like those, please contact Kevin Hallinan.

Dayton Regional Green Meeting Notes, Tim Leonard, Adam Foster, Abigail Lisjak

Sustainability and Connectivity

These are notes from our meeting with Lamees Mubaslat from Dayton Regional Green. She is really excited about more mentoring programs in Dayton.

Dayton's Best 2017 Project: Moving Forward, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

This is a summary of work for the Sustainability and Connectivity group in Dr. Kevin Hallinan's 2017 Local Sustainability with Abundance course. It describes our research process over the course of the semester and some final conclusions. Additionally, it discusses how we see the project continuing beyond our work.

Mentoring Brochure: Longer Version, Tim Leonard, Abigail Lisjak, Adam Foster

Sustainability and Connectivity

This is a mentoring brochure we created to show different organizations our ideas. This is the longer of two versions.

Mentoring Brochure: Shorter Version, Tim Leonard, Abigail Lisjak, Adam Foster

Sustainability and Connectivity

We made these brochures to talk to different organizations about our thoughts and ideas. There are two iterations of this. This one has less words.

Sustainability Survey, Dayton Regional Green Member Businesses, 2017, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

This document is a sustainability and sharing survey intended for businesses that are Dayton Regional Green members. Dayton Regional Green already has an extensive survey. This survey tries to avoid redundancy in surveys by asking other questions not included in DRG3's survey. It asks questions regarding mentoring, sharing, local sourcing, and sustainability.

Sustainability Survey, Dayton Regional Green Nonmember Businesses, 2017, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

This document is a sustainability and sharing survey intended for businesses that are not already Dayton Regional Green members. This survey includes questions similar to what is in DRG3's survey. It asks questions regarding mentoring, sharing, local sourcing, energy, waste streams, and sustainability.

Team Meeting Minutes, January-April 2017, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

This document provides notes from meetings with several Dayton-area community leaders. Several ideas that make Dayton more community-oriented and material-efficient are discussed.

Hackathon 2017 Project: Resource-Sharing Website, Zachary Siefker, Theresa Isemann, Andrew Eckrich

Sustainability and Connectivity

Our team was given the opportunity to pitch a concept to students attending UD’s Hackathon event on Febraury 22, 2017. One group took on the project and created the framework for a website that could be used for business connectivity and sharing. This document spells out the major takeaways from the project.

Influence Of Internal Variability On Population Exposure To Hydroclimatic Changes, Justin S. Mankin, Daniel Viviroli, Mesfin Mekonnen, Arjen Y. Hoekstra, Radley M. Horton, Jason E. Smerdon, Noah S. Diffenbaugh

Daugherty Water for Food Global Institute: Faculty Publications

Future freshwater supply, human water demand, and people’s exposure to water stress are subject to multiple sources of uncertainty, including unknown future pathways of fossil fuel and water consumption, and ‘irreducible’ uncertainty arising from internal climate system variability. Such internal variability can conceal forced hydroclimatic changes on multi-decadal timescales and near-continental spatial-scales. Using three projections of population growth, a large ensemble from a single Earth system model, and assuming stationary per capita water consumption, we quantify the likelihoods of future population exposure to increased hydroclimatic deficits, which we define as the average duration and magnitude by which evapotranspiration exceeds precipitation …

Project Plan - Mentoring, Abigail Lisjak, Patrick Gray, Timothy Leonard, Adam Foster

Sustainability and Connectivity

A presentation that includes the ideal goal for the project as well as how the project can relate to the other projects in the class.

2017 Spring Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Spring 2017 ENGR333 project focused on campus energy consumption.

I asked the students “Can you construct a fine-grained, bottom-up electricity demand model that predicts the annual electricity consumption for the dormitories (section A) and the PE complex (section B) for each year of the last decade with an accuracy of ±2%?”

Customer

The customer for this project was Jack Phillips, Assistant Director (Mechanical) at Calvin’s Physical Plant.

Application Of Experimental Investigation Of Forming Limit Diagrams Of Tailor Welded Blanks In Ship Hull Design, Mehdi Sepasi

MARENER 2017

No abstract provided.

Effects Of Initial Aquifer Conditions On Economic Benefits From Groundwater Conservation, T. Foster, N. Brozovic, A. P. Butler

Daugherty Water for Food Global Institute: Faculty Publications

Worldwide, there is growing recognition of the need to reduce agricultural groundwater use in response to rapid rates of aquifer depletion. To date, however, few studies have evaluated how benefits of conservation vary along an aquifer’s depletion pathway. To address this question, we develop an integrated modeling framework that couples an agro-economic model of farmers’ field-level irrigation decisionmaking with a borehole-scale groundwater flow model. Unique to this framework is the explicit consideration of the dynamic reductions in well yields that occur as an aquifer is depleted, and how these changes in intraseasonal groundwater supply affect farmers’ ability to manage production …