Sustainability Commons^™

Application Of Improved Hierarchic Analytic Process In The Classification Of Mine Hydrogeological Types, Wang Tiantian, Jin Dewu, Yang Jian, Liang Xiangyang

Coal Geology & Exploration

The classification of mine hydrogeological type is an important part of mine hydrogeology work. It is of great significance to analyze water filling conditions, evaluate water hazard and guide mine water prevention work. In order to evaluate mine hydrogeological conditions, this paper introduced optimal transfer matrix to improve hierarchic analytic process, and then applied this method to classify mine hydrogeological types. Taking four pairs of active mines in Hujierte mining area of Inner Mongolia as an example, the evaluation index system for classification of mine hydrogeological types was built on the basis of analysis of the hydrogeological conditions, then theoretical …

Design And Application Of Drilling Rod Vibration Frequency Measurement System, Liu Naipeng, Hu Yule, Wang Wei

Coal Geology & Exploration

During drilling, resonance is generated when the natural frequency of the drilling rod is consistent with the external excitation frequency. This will cause fatigue-failure of the drilling rod and serious consequences. To avoid this, a drilling rod vibration measurement system based on Micro-Electro-Mechanical System was designed. This system uses the three-axis acceleration sensor to measure the acceleration of the drilling rod in three directions. The upper computer software written in LabVIEW can storage, upload, display and process data. Then the fast Fourier Transform was taken to analyze the vibration frequency of the drilling rod. Finally the system is installed on …

Elastic Mechanics Solution Of Water Proof Key Layer In Coal Seam Floor Under High Water Pressure, Wang Yan, Yao Duoxi, Lu Haifeng

Coal Geology & Exploration

Aiming at the problem of water resisting capacity of the key layer in seam floor under the action of high pressure water, the key stratum was simplified as a fixed beam. The stress and displacement were calculated by the stress function method and the semi inverse method respectively. The results of two calculations were compared with the FLAC^3D results. The results show that the stress and displacement obtained by the stress function method are more appropriate than those calculated by the FLAC^3D method. It is suggested that for elastic mechanics analytic method of the fixed beam of the …

Integrated Identification Of Sequence Boundary Through Outcrop, Seismic With Logging And Geochemistry: A Case Of Jurassic In Northeastern Margin Of Ordos Basin, Zhang Tianfu, Zhang Yun, Cheng Yinhang, Miao Peisen, Ao Cong, Jin Ruoshi, Duan Lianfeng, Duan Xiaolong

Coal Geology & Exploration

Jurassic strata is mainly rock series containing coal and uranium in Ordos basin. The recognition of Jurassic sequence interfaces were mainly relied on the field outcrop, logging lithology of unconformity surface or the sedimentary discontinuity. However, it is tend to experience human recognition of randomness in the sequence interfaces recognition without macroscopic characteristics. Therefore, based on routine identification work such as outcrop profile and electrical curve of nearly 1 000 boreholes, combined with vertical changes of two-dimensional seismic profile and chemical index of alteration(CIA), three long-term cycle sequence interfaces(TSB1-TSB3) and seven medium-term cycle sequence interfaces(SB1-SB7) were finally identified in Jurassic …

Response Relation Between Fracturing Curve And Reservoir Pollution Degree Of Coalbed Methane Wells, Zhuang Dengdeng, Wang Yanbin, Tao Chuanqi, Chen Yan

Coal Geology & Exploration

In order to study the relationship between response curve and the pollution degree of fractured reservoir, taking Shizhuang block in Qinshui basin as an example, wells with different sensitivity of reservoir in the block were selected, through comparison of the difference of the dropping trace characteristics after the hydraulic curve reaches the fracture pressure in the fracturing curves of fracturing operation in different wells, the response law of hydraulic dropping trace and the reservoir sensitivity was summed up. Then in the same block according to the dropping trace of the hydraulic curves, the sensibility of reservoir was judged in several …

Assessing Landscape Scale Heterogeneity In Irrigation Water Use With Remote Sensing And In Situ Monitoring, T. Foster, I. Z. Goncalves, I. Campos, C. M.U. Neale, N. Brozovic

Daugherty Water for Food Global Institute: Faculty Publications

Understanding how irrigation is used across agricultural landscapes is essential to support efforts to grow more food while reducing pressures on limited freshwater resources. However, to date, few studies have analyzed the underlying spatial and temporal variability in farmers’ individual water use decisions at a landscape scale.Wecompare estimates of irrigation water requirements derived using state-of-the-art remote sensing models with metered abstraction records for 1400 fields over a 13 year period in the US state of Nebraska, one of the world’s most intensively irrigated agricultural regions. Weshow that farmers’ observed water use decisions often diverge significantly from biophysical estimates of crop …

Irrigation Water Quality—A Contemporary Perspective, Arindam Malakar, Daniel D. Snow, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

In the race to enhance agricultural productivity, irrigation will become more dependent on poorly characterized and virtually unmonitored sources of water. Increased use of irrigation water has led to impaired water and soil quality in many areas. Historically, soil salinization and reduced crop productivity have been the primary focus of irrigation water quality. Recently, there is increasing evidence for the occurrence of geogenic contaminants in water. The appearance of trace elements and an increase in the use of wastewater has highlighted the vulnerability and complexities of the composition of irrigation water and its role in ensuring proper crop growth, and …

Twenty-Three Unsolved Problems In Hydrology (Uph) – A Community Perspective, Günter Blöschl, Christopher M. U. Neale, A Cast Of Thousands

Daugherty Water for Food Global Institute: Faculty Publications

This paper is the outcome of a community initiative to identify major unsolved scientific problems in hydrology motivated by a need for stronger harmonisation of research efforts. The procedure involved a public consultation through online media, followed by two workshops through which a large number of potential science questions were collated, prioritised, and synthesised. In spite of the diversity of the participants (230 scientists in total), the process revealed much about community priorities and the state of our science: a preference for continuity in research questions rather than radical departures or redirections from past and current work. Questions remain focused …

Impact Of The Application Of Domestic Wastewater By Subsurface Drip Irrigation On The Soil Solution In Sugarcane Cultivation, Aline Azevedo Nazário, Ivo Zution Gonçalves, Eduardo Augusto Agnellos Barbosa, Leonardo Nazário Silva Dos Santos, Daniel Rodrigues Cavalcante Feitosa, Edson Eiji Matsura

Daugherty Water for Food Global Institute: Faculty Publications

The agricultural use of domestic sewage is a viable alternative for recycling nutrients; however, there is concern regarding the impact of its use due to the concentration of chemical elements present in this type of effluent. The use of principal component analysis determines the existence or lack of anomalous samples and the relations between measured variables and their relative contribution among samples that help in monitoring the impact of the use of effluents on soil chemical components. Thus, the objective of this work was to identify nutrient ions present in the soil solution during the first ratoon sugarcane irrigated with …

Public Attitudes About Private Forest Management And Government Involvement In The Southeastern United States, Melissa M. Kreye, Renata Rimsaite, Damian C. Adams

Daugherty Water for Food Global Institute: Faculty Publications

In the southern United States the country’s top wood-producing region, factors such as intergenerational land transfer and population spillover from urban areas have resulted in forestland conversion and reduced production of critical ecosystem services associated with forest systems (e.g., timber, clean water supply, wildlife habitat). Public attitudes, which drive forestland policy prescriptions, may also be evolving due to the way people experience and perceive forests (e.g., recreation), and think about the role of government in private forest decisions. These changes have significant implications for forestland management and the forest-based economy, both locally and globally. We present the results of a …

Mapping Regional Turbulent Heat Fluxes Via Assimilation Of Modis Land Surface Temperature Data Into An Ensemble Kalman Smoother Framework, Xinlei He, Tongren Xu, Sayed M. Bateni, Christopher M. U. Neale, Shaomin Liu, Thomas Auligne, Kaicun Wang, Shoudong Zhu

Daugherty Water for Food Global Institute: Faculty Publications

Estimation of turbulent heat fluxes via variational data assimilation (VDA) approaches has been the subject of several studies. The VDA approaches need an adjoint model that is difficult to derive. In this study, remotely sensed land surface temperature (LST) data from the Moderate Resolution Imaging Spectroradiometer (MODIS) are assimilated into the heat diffusion equation within an ensemble Kalman smoother (EnKS) approach to estimate turbulent heat fluxes. The EnKS approach is tested in the Heihe River Basin (HRB) in northwest China. The results show that the EnKS approach can estimate turbulent heat fluxes by assimilating low temporal resolution LST data from …

Agricultural Water Transfers In The Western United States, Richael Young, Nicholas Brozovic

Daugherty Water for Food Global Institute: Faculty Publications

Irrigation for agricultural production represents the largest consumptive use of water in the western United States. Understanding the ways in which agricultural producers respond to physical and institutional water scarcity is therefore key to managing water risk. One of the important risk management tools available to agricultural producers is the ability to transfer water across space and time. Water transfers range from very informal handshake agreements between neighbors to very formal transfers of real property across large distances with mandatory state and federal reporting. Given the range of potential water transfer mechanisms, there are significant knowledge gaps on the variety, …

2019 Nebraska Water Productivity Report, Mesfin Mekonnen, Christopher Michael Usher Neale, Chittaranjan Ray, Galen E. Erickson, Adam Liska, Haishun Yang, Thiago L. Romanelli, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

Nebraska’s agricultural production is diverse and vast, ranking the state fourth in total value of agricultural products in the U.S. The state is a national leader in terms of agricultural production: it is the third largest producer of corn and second largest in cattle production. Nebraska is also the second largest producer of ethanol and distillers’ grains. The production and use of these three commodities are highly interlinked. Corn is a major input in livestock feed and the ethanol industry. Ethanol plants then produce distillers’ grains as a co-product that is also used as livestock feed, thus forming what the …

Process Sustainability Evaluation For Manufacturing Of A Component With The 6r Application, Ana E. Bonilla Hernández, Tao Lu, Tomas Beno, Claes Fredriksson, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Sustainability in manufacturing can be evaluated at product, process and system levels. The 6R methodology for sustainability enhancement in manufacturing processes includes: reduced use of materials, energy, water and other resources; reusing of products/components; recovery and recycling of materials/components; remanufacturing of products; and redesigning of products to utilize recovered materials/resources. Although manufacturing processes can be evaluated by their productivity, quality and cost, process sustainability assessment makes it a complete evaluation. This paper presents a 6R-based evaluation method for sustainable manufacturing in terms of specific metrics within six major metrics clusters: environmental impact, energy consumption, waste management, cost, resource utilization and …

Development Of Poly-Vinyl Alcohol Stabilized Silver Nanofluids For Solar Thermal Applications, James Walshe, George Amarandei, Hind Ahmed, Sarah Mccormack, John Doran

Articles

Nanofluids offer the potential to address the low thermal conductivities found in conventional heat transfer fluids, through their unique electrical, optical and thermal properties, but their implementation remains restricted due to absorption and stability limitations. Here, we characterize and exploit the distinctive plasmonic properties exhibited by polyvinyl-alcohol stabilized silver nanostructures by tuning their absorption and thermal properties through controlling the nanoparticle size, morphology and particle-size distribution configuration at the synthesis stage. The photo-thermal efficiency of different water-based silver nanofluids under a standard AM1.5G weighted solar spectrum were explored, the influence of each of these components on the resulting fluids performance …

Stem And Sustainability: Creating Aviation Professional Change Agents, P. Clark, Doreen Mcgunagle, L. Zizka

Publications

With the evolution of the workforce and the growing needs of the aviation industry, a clear need for concrete sustainability initiatives and actions have emerged. Sustainability in this sense becomes a matter of survival. For this reason, in this chapter, we will attempt to close three gaps in current sustainability studies: Theory vs practice, intention vs behavior, and education vs workplace.

Our purpose is to develop a ‘simple’ strategy for integrating all three pillars of sustainability into STEM HE programs that create authentic engagement and real buy-in from the students that are then replicated in the workplace. Based on the …

A Total Life Cycle Approach For Developing Predictive Design Methodologies To Optimize Product Performance, Buddhika M. Hapuwatte, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Sustainable products must be designed by considering how design decisions impact their total life cycle (TLC) sustainability content. Even more so important when designing products to incorporate the technological elements of sustainable manufacturing, the 6Rs (Reduce, Reuse, Recycle, Recover, Redesign and Remanufacture), to achieve Circular Economy (CE). This paper presents the preliminary work of an ongoing research project on developing a novel framework incorporating predictive models with TLC considerations. This unique approach develops and integrates models with associated risks, and optimizes for maximizing the sustainability benefits due to design decisions. Such predictive capability is extremely useful for process planning, where …

Sustainable Production Through Balancing Trade-Offs Among Three Metrics In Flow Shop Scheduling, Amin Abedini, Wei Li, Fazleena Badurdeen, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

In sustainable manufacturing, inconsistencies exist among objectives defined in triple-bottom-lines (TBL) of economy, society, and environment. Analogously, inconsistencies exist in flow shop scheduling among three objectives of minimizing total completion time (TCT), maximum completion time (MCT), and completion time variance (CTV), respectively. For continuous functions, the probability is zero to achieve the objectives at their optimal values, so is it at their worst values. Therefore, with inconsistencies among individual objectives of discrete functions, it is more meaningful and feasible to seek a solution with high probabilities that system performance varies within the …

Designing And Redesigning Products, Processes, And Systems For A Helical Economy, Ryan Bradley, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

The Circular Economy (CE) concept has promised to unlock trillions of dollars in business value while driving a significant reduction in the world’s resource consumption and anthropogenic emissions. However, CE mainly lives in ambiguity in the manufacturing domain because CE does not address the changes needed across all of the fundamental elements of manufacturing: products, processes, and systems. Conceptually, CE is grounded in the concept of closed-loop material flows that fit within ecological limits. This grounding translates into a steady state economy, a result that is not an option for the significant portion of the world living in poverty. Therefore, …

Passive Cooling In Non-Residential Nearly Zero Energy Buildings: A Thermal Comfort Analysis Based On Measurement, Modelling And Simulation, Adam O'Donovan

Theses

Overheating in non-residential nearly zero energy buildings (nZEBs) presents a major risk to the well-being, productivity and thermal satisfaction of the people who occupy them. As global temperatures are expected to increase in the future, the overheating risk and cooling demand is also expected to increase. Therefore, low cost and low energy solutions that are able to maintain thermally comfortable conditions without the need for mechanical systems will be vital in decarbonising the building stock and ensuring that buildings are comfortable and remain low carbon now and in the future. Passive cooling has long been championed as a low cost …

Transforming A Circular Economy Into A Helical Economy For Advancing Sustainable Manufacturing, Ryan T. Bradley

Theses and Dissertations--Mechanical and Aerospace Engineering

The U.N. projects the world population to reach nearly 10 billion people by 2050, which will cause demand for manufactured goods to reach unforeseen levels. In order for us to produce the goods to support an equitable future, the methods in which we manufacture those goods must radically change. The emerging Circular Economy (CE) concept for production systems has promised to drastically increase economic/business value by significantly reducing the world’s resource consumption and negative environmental impacts. However, CE is inherently limited because of its emphasis on recycling and reuse of materials. CE does not address the holistic changes needed across …

Towards Sustainable Production Of Chemicals And Fuels From The Fast Pyrolysis Of Waste Polyolefin Plastics, Ulises Gracida Alvarez

Dissertations, Master's Theses and Master's Reports

The increasing amount of plastic waste (PW) generation has become an important concern due to the leveled-off recycling rates. Therefore, governmental agencies around the world, including state governments in the United States, have proposed initiatives to minimize the amount of PW that is landfilled and encourage recycling or energy recovery. Circular economy is a strategy that attempts on reusing PW to produce new polymers while avoiding its disposal and the use of virgin material. Chemical recycling raises an interesting technology prospect due to the potential reduction of pollutant emissions and the establishment of a circular economy through the production of …

Software Defined Networks Based Smart Grid Communication: A Comprehensive Survey, Mubashir Husain Rehmani, Alan Davy, Brendan Jennings, Chadi Assi

Publications

The current power grid is no longer a feasible solution due to ever-increasing user demand of electricity, old infrastructure, and reliability issues and thus require transformation to a better grid a.k.a., smart grid (SG). The key features that distinguish SG from the conventional electrical power grid are its capability to perform two-way communication, demand side management, and real time pricing. Despite all these advantages that SG will bring, there are certain issues which are specific to SG communication system. For instance, network management of current SG systems is complex, time consuming, and done manually. Moreover, SG communication (SGC) system is …

Energy Efficiency And Fatigue Failure On Gears And Bearings For Processing Rebar Steel, Jesus Gabriel Garcia

Open Access Theses & Dissertations

Steel industry is a major emitter of air pollutants, a leading industrial consumer of water, a minor source of contaminated liquids, a massive producer of solid waste, and a significant source of CO2. The objective on this thesis work is to minimize the greenhouse gas emissions when processing steel. Gears and bearings were evaluated based on their performance when exposed to cyclic stresses. The importance for having a proper set up on rolling mills to increase efficiency for processing rebar steel has been detailed on paper. In contrast, mechanical vibration has been measured on gears and bearings to determine efficiency …

Satellite Maintenance: An Opportunity To Minimize The Kessler Effect, Bettina M. Mrusek Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Recently, there has been an emphasis on the growing problem of orbital debris. While the advantages of placing satellites into space are numerous, advances in satellite technology combined with the growth of the industry have resulted with a significant amount of debris in the orbits surrounding our planet. The harshness of the space environment has also contributed to the debris, as evidenced by the number of objects currently in orbit which are not operational. As the amount of debris grows, so too does the likelihood of collisions, ultimately culminating in the Kessler Effect. However, recent advances in propulsion, advanced navigation, …

Ignatian Pedagogy For Sustainability To Support Community-Based Projects: Client-Focused Sustainable Energy Solutions, Andrew Baruth

Jesuit Higher Education: A Journal

Seeing the words of Laudato Si’ as a call to action, we are engaging students in Ignatian Pedagogy for Sustainability through a series of community-based projects with the goal of client-focused sustainable energy solutions and associated dialogue. We outline the development of a purpose-created Energy Technology undergraduate program housed in the College of Arts and Sciences at Creighton University, born from Ignatian Sensibilities, and highlight the role of client engagement to engross students in a client-focused design process to deliver sustainable energy initiatives that become practically feasible with student leadership. For the senior capstone of this program, students engage in …

Preface: Earth Observation For Integrated Water And Basin Management: Challenges For Adaptation To A Changing Environment, María J. Polo, Maria P. González-Dugo, Christopher M.U. Neale

Daugherty Water for Food Global Institute: Faculty Publications

Integrated river basin management involves a sound knowledge of water and land interactions, and impacts from and feedbacks to human activity. Remote sensing has been an efficient and increasingly promising means of gathering direct information of the Earth surface, as well as information on water and energy fluxes. The recent generation of high-resolution sensors offers a huge potential for monitoring, assessing, and modelling our changing environment in a context of uncertainty about how future climate conditions will affect the current water resource and basin management framework. Moreover, large amounts of data are now available posing a challenging opportunity to the …

2018 Fall Engr333 Project Final Report (Section A), 2018 Fall Engr333 Section A

ENGR 333

Calvin College currently spends 2.35 million dollars on energy every year. Physical Plant is under pressure to reduce the amount of energy that Calvin purchases from the electrical grid since the college is facing many budget constraints. In addition, President Le Roy signed the President’s Carbon Commitment to achieve carbon neutrality by 2057. With this need to save money on energy and reduce the college’s carbon footprint, the objective of this project was to determine the largest possible reduction in Calvin’s annual energy costs given a five-million-dollar investment in renewable energy.

2018 Fall Engr333 Project Final Report (Section B), Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten

ENGR 333

What is the largest possible reduction in Calvin College’s annual energy costs from a $5M initial investment in renewable energy? Renewable energy systems are essential for Calvin College to reduce greenhouse gas emissions and achieve carbon neutrality to meet the Carbon Commitment that President Le Roy signed in December 2017. Also, a significant cost reduction could be a positive result of transitioning to renewable energy sources such as geothermal, wind, solar, and biomass. Four renewable energy sources were studied throughout the semester to determine a feasible renewable energy plan for Calvin with a $5M investment.

Riverbank Filtration Impacts On Post Disinfection Water Quality In Small Systems—A Case Study From Auburn And Nebraska City, Nebraska, Matteo D'Alessio, Bruce Dvorak, Chittaranjan Ray

Daugherty Water for Food Global Institute: Faculty Publications

Small water systems can experience a fluctuating quality of water in the distribution system after disinfection. As chlorine is the most common disinfectant for small systems, the occurrence of disinfection byproducts (DBPs) represents a common problem for these systems. Riverbank filtration (RBF) can be a valuable solution for small communities located on riverbanks. The objectives of this study were to evaluate (i) the improvements in water quality at two selected RBF systems, and (ii) the potential lower concentrations of DBPs, in particular, trihalomethanes (THMs), in small systems that use RBF. Two small communities in Nebraska, Auburn and Nebraska City, using …