Oil, Gas, and Energy Commons^™

A Study Of Solvent Effects On The Ground And Excited States Of Endohedral Tri-Scandium Nitride C80 Fullerene Coupled With Zinc Phthalocyanine And Metal-Free Phthalocyanine Using Dft-Pcm Method, Timilsina Prasad Timlsina

Open Access Theses & Dissertations

The photovoltaic active materials composed of endohedral metafullerene and phthalocyanine derivatives are known as excellent electron donor-acceptor pairs. The tri-metallic nitride endohedral C80 fullerene exhibits high absorption coefficients in the visible region of the spectrum and has similar electron-accepting abilities as that of C60 fullerene, which can allow for higher efficiencies in OPV devices. In this study, we examine the effect of solvent on the charge transfer excitation energies of Sc3N@C80-ZnPc and Sc3N@C80-H2Pc donor-acceptor molecular complexes. Three different solvents with different polarity - water, toluene, and acetone are used. The solvent is modeled as a polarizable continuum as implemented in …

Grenvillian Tectonomagmatic Evolution Of Southwestern Laurentia; Virtual Tour Of Multidimensional Orders Of Scale; Two Methods To Describe The Vastness Of Time; Math Concepts Utilizing Google Earth; Systematic Approach To Motion Analyses; Mathematics And Earth Science-Based Knowledge And Learning, Anthony M. Alvarez

Open Access Theses & Dissertations

This Dissertation is the product of several individual multi-disciplinary investigations that cover a variety of topics in mathematics, physics, geology, and geoscience education. The first chapter formulates a better understanding of the timings, magma source, and relationships between dikes and associated magmatic bodies of the Red Bluff Granitic Complex to provide a clearer picture of the evolution of post-Grenville magmatism and tectonism of southwestern USA. The second chapter provides an improved method for representing spatial information in the form of a multidimensional virtual tour where the background map is used as a central object. The third chapter describes two methods …

Depositional Controls And Sequence Stratigraphy Of Lacustrine To Marine Transgressive Deposits In A Rift Basin, Lower Cretaceous Bluff Mesa, Indio Mountains, West Texas, Andrew Anderson

Open Access Theses & Dissertations

Successful hydrocarbon exploration in former rift basins of the South Atlantic pre-salt has generated interest in understanding depositional, diagenetic, and stratigraphic controls on pre-salt deposits. However, most studies to date have focused on attributes and controls on presalt lacustrine carbonate reservoir systems and little work has been done on the overlying marine sealing facies. Currently our standard sequence stratigraphic model of marine transgression of rift systems involves a single pulse of marine flooding over fluvially-incised valleys resulting in backstepping of fluvial and estuarine siliciclastic facies within the erosionally confined zone of an incised valley. However, the pre-salt systems of the …

Quantifying The Characteristic Length Of A Combustor For An Ionic Liquid Monopropellant Thruster, Kimberly Marie Hogge

Open Access Theses & Dissertations

Ionic liquid monopropellants are currently being researched as a promising alternative to hydrazine in propulsion systems. This report presents a flame study that delineates the flame length of the expected decomposition products from an ionic liquid monopropellant. Through these studies, the characteristic length of a combustion chamber will be defined through calculations and empirical correlations. There is limited information on designing a propulsion system for an ionic liquid monopropellant. Therefore, defining the magnitude for an effective characteristic length serves as beneficial in designing a propulsion system for an ionic liquid monopropellant thruster.

Gypsum, Calcite, And Dolomite Caprock Fabrics And Geochemistry From The Gypsum Valley Salt Diapir, Paradox Basin, Southwestern Colorado, Kevin Lerer

Open Access Theses & Dissertations

Caprocks are found on top of or in a lateral position relative to salt diapirs. The caprocks predominantly comprise sulfate minerals such as anhydrite or gypsum, which presumably accreted during the dissolution of salt from evaporite sediments. In some cases, the sulfate minerals are replaced by carbonate minerals, referred to as "carbonate caprock". Carbonate caprocks associated with salt diapirs are important because they can act as reservoirs or conduits for hydrocarbons, and because they can be easily misidentified as carbonate lithologies belonging to the stratigraphy of the sedimentary sequences adjacent to the diapir, which can jeopardize the accurate interpretation of …

Genesis Of Unique Carbonate Fans In A Pre-Salt Reservoir Analogue, Indio Mountains, West Texas, Andre Llanos

Open Access Theses & Dissertations

Hydrocarbon exploration in pre-salt sediments of rift basins on the South Atlantic Margin have proven to be successful major oil plays. Located on the western margin of the rift, the Brazilian pre-salt reservoirs of the Santos, Campos, and Espirito Santo Basins are hosted by lacustrine/marine-influenced carbonates that comprise laterally extensive, laminated microbialite facies. The Indio Mountains, located in West Texas, provide well-exposed outcrops of Lower Cretaceous marine and non-marine rift basin strata that can be considered a reservoir-analog to the South Atlantic Margin pre-salt facies. Of particular interest for hydrocarbon exploration are unique carbonate features that have been discovered in …

Pyroelectric Ceramics As Temperature Sensors For Energy System Applications, Jorge Luis Silva

Open Access Theses & Dissertations

Temperature is continuously monitored in energy systems to ensure safe operation temperatures, increase efficiency and avoid high emissions. Most of energy systems operate at high temperature and harsh environments to achieve higher efficiencies, therefore temperature sensing devices that can operate under these conditions are highly desired. The interest has increased in temperature sensors capable to operate and in harsh environments and temperature sensors capable to transmit thermal information wirelessly. One of the solutions for developing harsh environment sensors is to use ceramic materials, especially functional ceramics such as pyroelectrics. Pyroelectric ceramics could be used to develop active sensors for both …

Renewable Energy Systems Optimization Using Monte Carlo Simulation And Evolutionary Algorithms, Nicolas Lopez

Open Access Theses & Dissertations

This Dissertation explores the Renewable Energy Integration Problem, and proposes a Genetic Algorithm embedded with a Monte Carlo simulation to solve large instances of the problem that are impractical to solve via full enumeration. The Renewable Energy Integration Problem is defined as finding the optimum set of components to supply the electric demand to a hybrid

microgrid. The components considered are solar panels, wind turbines, diesel generators, electric batteries, connections to the power grid and converters, which can be inverters and/or rectifiers. The methodology developed is explained as well as the combinatorial formulation. In addition, 2 case studies of a …

Fabrication And Testing Of Cfrp Composites With Embedded Piezoelectric Particles For Temperature Sensing And Energy Harvesting, Emilio Tarango Valles

Open Access Theses & Dissertations

As a part of this world's continuous evolution and technological advancements, smart materials and functional composites have become an attractive topic. In many cases, these new functional composites are replacing the traditional engineering material due to their customizable mechanical properties. This Thesis analyzes and demonstrates the signal response, sensing capabilities and structural properties from Carbon/Glass Fiber Reinforced Plastic Composites (CFRP) with embedded Lead Zirconate Titanate Particles (PZT). The added PZT particles function as actuators, giving the composites a functionality. The PZT quantity inside each composite was variated to study better and characterize the mechanical and electrical properties; the variations were …

Adaptive Switched Capacitor Voltage Boost For Thermoelectric Generation, Rene A. Brito

Open Access Theses & Dissertations

Thermoelectric generators (TEG) and other forms of energy harvesting often provide voltages that are not directly usable by traditional electronics as levels are too low from the TEG. While increasing the number of thermoelectric elements can ultimately increase the power output, there is a tradeoff between size and power. By implementing charge pumps, a proposed circuit technique is described that can boost the TEG output to levels that can be used for energy harvesting applications. Current voltage boost circuits for TEGs simply boost a voltage by a set amount. The proposed circuit consists of an analog chip, to provide several …

A Novel Approach For Evaluating The Impact Of Fixed Variables On Photovoltaic (Pv) Solar Installations Using Enhanced Meta Data Analysis Among Higher Education Institutions In The United States, Diane N. De Hoyos

Open Access Theses & Dissertations

The global demand for electric energy has continuously increased over the last few decades. Some mature, alternative generation methods are wind, power, photovoltaic panels, biogas and fuel cells. In order to find alternative sources of energy to aid in the reduction of our nation's dependency on non-renewable fuels, energy sources include the use of solar energy panels. The intent of these initiatives is to provide substantial energy savings and reduce dependence on the electrical grid and net metering savings during the peak energy-use hours.

The focus of this study explores and provides a clearer picture of the adoption of solar …

Computational Modeling Of A 60kw Oxy-Methane Direct Power Extraction Combustor, Omar Daniel Vidana

Open Access Theses & Dissertations

ANSYS Fluent was used to optimize components of a direct power extraction combustor. This includes the fuel injector, nozzle, and cooling units. Changes in the injector's inlet location impacted pressure and velocity distribution. An angle of 115 degrees with respect to the x-axis was found to increase distribution efficiency. Temperature and velocity data from the combustor and nozzle were calculated using NASA CEA and Fluent. Magnitudes of temperature and velocity for CEA and Fluent matched within 9% and 4%, respectively. For the cooling system it is expected that cavitation will not occur since the saturation temperature of water is not …

An Effective And Optimal Quality Control Approach For Green Energy Manufacturing Using Design Of Experiments Framework And Evolutionary Algorithm, Juan Alejandro Saavedra

Open Access Theses & Dissertations

Quality Control (QC) and Quality Assurance (QA) strategies vary significantly across industries in the manufacturing sector depending on the product being built. Such strategies range from simple statistical analysis and process controls, decision-making process of reworking, repairing, or scraping defective product. This study proposes an optimal QC methodology in order to include rework stations during the manufacturing process by identifying the amount and location of these workstations. The factors that are considered to optimize these stations are cost, cycle time, reworkability and rework benefit. The goal is to minimize the cost and cycle time of the process, but increase the …

Reliable And Secure Scada Framework For Residential Microgrid Communications, Goutham Krishna Chalamasetty

Open Access Theses & Dissertations

Cyber security is one of the major needs for electric power industry like many other industries and organizations. The advancements in technology provide numerous benefits to power industry as well as benefits cyber attackers to perform different cyber-attacks on the industry. Power system is a complex physical entity that deals with power generation, distribution, and transmission. In general, no individual or company or an organization can bear a one hour power cut, which shows the need for reliability in electric power industry.

In order to develop a reliable and secure Supervisory Control and Data Acquisition (SCADA) communication network, this Thesis …

Sedimentologic And Stratigraphic Analysis Of Synrift Siliciclastic Fluvial And Lacustrine Strata In The Lower Cretaceous Upper Yucca Formation, Indio Mountains, West Texas, Matthew Robert Fox

Open Access Theses & Dissertations

Outcrops of the upper Yucca Formation in the Indio Mountains near Van Horn, Texas provide temporal, tectonic, and climatic similarities to Lower Cretaceous, synrift, greenhouse pre-salt lacustrine strata along in the subsurface of the South Atlantic margin. These "pre-salt" strata hold prolific petroleum reservoirs but despite extensive seismic studies performed for regional scale hydrocarbon exploration in these lacustrine reservoirs, sedimentologic and stratigraphic analyses have rarely been published. The Upper Yucca Formation in the Indio Mountains contain lacustrine reservoir analogs that intertongue with fluvial and deltaic sandstones. Near Squaw Canyon, fluvial-deltaic sandstones are reduced in abundance to lacustrine carbonates by nearly …

Touch And Step Potential Analysis At 23.9kv To 4.16kv & 13.8kv To 4.16kv Distribution Substations With Pad-Mounted Transformers, Floating Grounds, And Other Exposed Ungrounded Metal Bodies Using Winigs, David Guillermo Guzman

Open Access Theses & Dissertations

An electrical substation is composed of various subsystems that allow for the effective and safe operation of the power grid. One of the subsystems integrating a conventional substation is defined as the ground grid system. This system allows for the effective operation of the power grid and all the electrical equipment connected to it by providing a ground potential reference, commonly known as the system ground. In addition, the ground grid system provides safety to the workers and the public transiting inside or living nearby a substation by reducing the step and touch potential (or voltage) levels present during a …

Triphenylamine-, Porphyrin- And Fullerene-Based Derivatives For Photovoltaic And Other Applications, Danisha Marie Rivera Nazario

Open Access Theses & Dissertations

Proper collection of charges at the electrodes is an important process in organic solar cells. Interfacial layers between the electrodes and the photoactive layer have been design to improve charge collection and ohmic contacts. The most studied interfacial layer between the anode and the photoactive layer is the negatively charged polymer poly(3,4-ethylendioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), that possesses good hole transporting ability. However, inhomogeneities at the surface of the electrode after deposition of the polymer lower the stability and performance of the OPV devices. Triphenylamine (TPA) derivatives have received increased attention in the organic solar cells (OSCs) field because of their favorable light …

Processing And Property Evaluation Of Tungsten-Based Mixed Oxides For Photovoltaics And Optoelectronics, Mirella Vargas

Open Access Theses & Dissertations

Tungsten Oxide (WO3) films and low-dimensional structures have proven to be promising candidates in the fields of photonics and electronics. WO3 is a well-established n-type semiconductor characterized by unique electrochromic behavior, an ideal optical band gap that permits transparency over a wide spectral range, and high chemical integrity. The plethora of diverse properties endow WO3 to be highly effective in applications related to electrochromism, gas sensing, and deriving economical energy. Compared to the bulk films, a materials system involving WO3 and a related species (elements or metal oxides) offer the opportunity to tailor the electrochromic response, and an overall enhancement …

Heat Absorption Analysis By Falling Particles At High Temperatures For Concentrating Solar Power Systems, Arturo Sepulveda Fernandez

Open Access Theses & Dissertations

High temperature Heat Transfer Fluid (HTF) with Thermal Energy Storage (TES) for the Concentrated Solar Power (CSP) technology can provide a large and relatively cheaper storage option, as opposed to limited and expensive electrical battery storage with PV technology, and hence, it has potential to maintain a constant production when no sunlight is available. Research of material like aluminum, silicon, graphite could be potential candidates to work as thermal energy storage. Currently, nitrate and chloride molten salts are widely used as the TES medium for a CSP plant. However, molten salt, especially chlorides, must be handled carefully at high temperature …

Single And Multiple Objective Biomass-To-Biofuel Supply Chain Optimization Considering Environmental Impacts, Claudia Evangelina Valles Sosa

Open Access Theses & Dissertations

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers diminishing climate change by reducing Green House Gas Emissions, as well as providing energy security and enhancing rural development. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supply future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over …

Novel Endohedral Derivatives Of Sc3n@C2n (N = 34, 40) And Unique Tether Controlled Bis-Functionalization Of Fullerenes, Maira Raquel Ceron Hernandez

Open Access Theses & Dissertations

Since the discovery of fullerenes in 1985, their exohedral functionalization has been necessary to increase their solubility and explore their properties and potential applications in materials science and medicinal chemistry. This Thesis provides a short overview of the importance of electronic, size and shape complementarity in determining the structures of specific endohedral fullerene compounds. This is followed by a description of a new method for the separation of scandium nitride endohedral fullerenes Sc3N@C2n (n = 34, 39 and 40), and their monofunctionalization.

We also present the regioselective synThesis of easily isolable bis-derivatives of C60, C70, and M3N@Ih-C80 (M = Sc, …

Study Of A Directly Heated Oxy-Fuel Supercritical Power Generation System, A S M Arifur Rahim Chowdhury

Open Access Theses & Dissertations

The Directly heated supercritical oxy-fuel gas turbines have the potential to become an important addition to current power generation systems. They provide a higher thermal efficiency and more effective carbon capture techniques than existing gas turbines. Due to the higher density of the working fluids, the turbomachinery size in these systems can be reduced significantly; this will facilitate to minimize the operational cost. To achieve supercritical working fluid at the turbine inlet combustion needs to be conducted under enormous amounts of pressure; these values are is about 10 times those found in the present gas turbines. Additionally, existing material operational …

High Temperature Helical Tubular Receiver For Concentrating Solar Power System, Nazmul Hossain

Open Access Theses & Dissertations

In the field of conventional cleaner power generation technology, concentrating solar power systems have introduced remarkable opportunity. In a solar power tower, solar energy concentrated by the heliostats at a single point produces very high temperature. Falling solid particles or heat transfer fluid passing through that high temperature region absorbs heat to generate electricity. Increasing the residence time will result in more heat gain and increase efficiency. A novel design of solar receiver for both fluid and solid particle is approached in this paper which can increase residence time resulting in higher temperature gain in one cycle compared to conventional …

Wind Farm Optimization Using Evolutionary Algorithms, Carlos Marco Ituarte-Villarreal

Open Access Theses & Dissertations

In recent years, the wind power industry has focused its efforts on solving the Wind Farm Layout Optimization (WFLO) problem. Wind resource assessment is a pivotal step in optimizing the wind-farm design and siting and, in determining whether a project is economically feasible or not. In the present work, three (3) different optimization methods are proposed for the solution of the WFLO: (i) A modified Viral System Algorithm applied to the optimization of the proper location of the components in a wind-farm to maximize the energy output given a stated wind environment of the site. The optimization problem is formulated …

Solar Pv Power Generation Forecasting Using Hybrid Intelligent Algorithms And Uncertainty Quantification Based On Bootstrap Confidence Intervals, Donna Alhakeem

Open Access Theses & Dissertations

This Thesis focuses on short-term photovoltaic forecasting (STPVF) for the power generation of a solar PV system using probabilistic forecasts and deterministic forecasts. Uncertainty estimation, in the form of a probabilistic forecast, is emphasized in this Thesis to quantify the uncertainties of the deterministic forecasts. Two hybrid intelligent models are proposed in two separate chapters to perform the STPVF. In Chapter 4, the framework of the deterministic proposed hybrid intelligent model is presented, which is a combination of wavelet transform (WT) that is a data filtering technique and a soft computing model (SCM) that is generalized regression neural network (GRNN). …

Depositional And Sequence Stratigraphic Framework Of An Exposed Neoproterozoic Suprasalt Minibasin At Patawarta Diapir, Flinders Ranges, South Australia, Cora Evelyn Gannaway

Open Access Theses & Dissertations

Outcrops of mixed carbonate/siliciclastic strata comprise the Neoproterozoic (Marinoan) Wilpena Group at Patawarta diapir in the Flinders Ranges, South Australia. Patawarta diapir is a ramping allochthonous salt sheet flanked by suprasalt and subsalt minibasin strata. The stratal and structural attributes of the coeval minibasin fills afford a unique perspective on lateral and vertical salt migration and the impacts of salt-modified bathymetry in shallow marine depositional environments. This study documents the depositional and diagenetic facies, stratal thickness trends, and structural style and stratal geometries of the suprasalt minibasin fill and correlates it to the previously studied subsalt minibasin fill. The goal …

Natural Selectivity Of Nickel And Vanadium In Crude Oil, Olienka P. De La O Fernandez

Open Access Theses & Dissertations

Nickel and Vanadium have always been found in crude oil all around the world. The metal content is found mainly in porphyrin structures in the asphaltene fraction of the petroleum. In order to determine the reason for this natural preference, a set of experiments testing thermodynamics, kinetics, and other factors were performed. Candidate metalloporphyrins containing Vanadyl, Chromium, Iron, Nickel, Copper and Zinc were analyzed through chemical reactions characterized using Silica Column Chromatography, HPLC, MS and UV-Visible. Theoretical analysis of the stability of metalloporphyrins was conducted using DFT/NRLMOL for computational calculation. The analysis of all factors leads us to conclude that …

Alkali Promoted Molybdenum (Iv) Sulfide Based Catalysts, Development And Characterization For Alcohol Synthesis From Carbon Monoxide And Hydrogen, Belinda Delilah Molina

Open Access Theses & Dissertations

For more than a century transition metal sulfides (TMS) have been the anchor of hydro-processing fuels and upgrading bitumen and coal in refineries worldwide. As oil supplies dwindle and environmental laws become more stringent, there is a greater need for cleaner alternative fuels and/or synthetic fuels. The depletion of oil reserves and a rapidly increasing energy demand worldwide, together with the interest to reduce dependence on foreign oil makes alcohol production for fuels and chemicals via the Fischer Tropsch synthesis (FTS) very attractive. The original Fischer-Tropsch (FT) reaction is the heart of all gas-to-liquid technologies; it creates higher alcohols and …

Growth And Analysis Of Micro And Nano Cdte Arrays For Solar Cell Applications, Brandon Adrian Aguirre

Open Access Theses & Dissertations

CdTe is an excellent material for infrared detectors and photovoltaic applications. The efficiency of CdTe/CdS solar cells has increased very rapidly in the last 3 years to ~20% but is still below the maximum theoretical value of 30%. Although the short-circuit current density is close to its maximum of 30 mA/cm2, the open circuit voltage has potential to be increased further to over 1 Volt. The main limitation that prevents further increase in the open-circuit voltage and therefore efficiency is the high defect density in the CdTe absorber layer. Reducing the defect density will increase the open-circuit voltage above 1 …

Numerical Investigation Of Impact Of Relative Humidity On Droplet Accumulation And Film Cooling, Luz Irene Bugarin

Open Access Theses & Dissertations

During the summer, high inlet temperatures affect the power output of gas turbine systems. Evaporative coolers have gained popularity as an inlet cooling method for these systems. Wet compression has been one of the common evaporative cooling methods implemented to increase power output of gas turbine systems due to its simple installation and low cost. This process involves injection of water droplets into the continuous phase of compressor to reduce the temperature of the flow entering the compressor and in turn increase the power output of the whole gas turbine system. This study focused on a single stage rotor-stator compressor …