Oil, Gas, and Energy Commons^™

A Cutting Trajectory Planning Technology Driven By Coal Seam Data In A Comprehensive Mining Face, Guo Yifeng, Xue Xusheng, Ma Hongwei, Zhang Guangming, Su Hao, Qi Ailing, Nie Zhen, Ma Kexiang, Wu Xuefei

Coal Geology & Exploration

Objective Currently, the insufficient full-element digitization and the prevalence of “data silos” in fully mechanized mining faces (FMMF) result in poor cutting precision and operational instability of shearers under complex undulating and abrupt geological conditions. These factors pose significant challenges to high-precision proactive trajectory planning. Methods Guided by the academic philosophy that “mining is data acquisition”, this paper proposes a coal seam data-driven cutting trajectory planning method for FMMFs. It elaborates on three core technologies: high-precision digital coal seam modeling, generative model updating and digital twin construction, and data-driven trajectory planning.To address low modeling precision, an intelligent interpolation-based digital coal …

Image Processing Technique To Find The Burden Rock Velocity And Its Interdependency On Bench Blasting Parameters – A Case Study, Channabassamma N, Akhil Avchar, Sahas V Swamy, Vedala Rama Sastry, Hemant Agrawale

Journal of Sustainable Mining

In any rock engineering or excavation project, optimizing blast design is essential for controlling post-blast phenomena such as flyrock, burden throw, and burden rock velocity (BRV). This study investigates the dynamic response of BRV in bench blasting operations by employing a high-speed camera and ProAnalyst software to quantify rock displacement. The relationships between BRV and key blast parameters, number of holes (NH), explosive charge per hole (EPH), total explosive charge (TEC), stiffness ratio (K), and stemming ratio (STR), were analyzed to identify linear or non-linear trends. Non-linear trends, …

A Method To Accelerate Rock Breakage With Soundless Chemical Demolition Agents, Patrick A. Darko, Hani S. Mitri

Journal of Sustainable Mining

Soundless chemical demolition agents (SCDA) are recognized as a safe and sustainable alternative for rock breakage, with the potential to reduce reliance on explosives in mining. However, their mechanical performance is considerably hampered in the extreme cold climate, with slow or no rock fracturing observed. To overcome this deficiency, two methods were developed in recent studies by 1) electric heating the SCDA borehole with high-temperature wire, and 2) increasing the SCDA mixing water temperature. Good results were obtained with both methods. This paper explores the merits of a hybrid approach combining the two methods to further enhance the SCDA efficiency …

Research Status And Development Trend Of Acidification And Permeability Improvement Technology For Low-Permeability Coal Seam, Shaochuan Chen, Yun Lei, Fuchao Tian, Jie Kang

Journal of Sustainable Mining

Low-permeability coal seams in China are often characterized by mineral-clogged pore-fracture systems, severely limiting coalbed methane (CBM) extraction efficiency. Acidification technology, which involves injecting acidic solutions into coal seams to dissolve minerals and enhance permeability, has emerged as a promising approach. This paper systematically reviews the mechanisms, laboratory findings, and field applications of acidification technology for permeability enhancement in low-permeability coal seams. Key findings include significant improvements in pore connectivity, reductions in gas adsorption capacity, and enhanced gas extraction rates post-acidification. Field tests demonstrate that acid fracturing can increase gas extraction volume by 4-7 times. The study also identifies current …

Improving Energy Reliability In Mining Areas Through Modelling And Control Of Resonance Phenomena In Solar-Integrated Power Systems, Yurii Papaika, Gennadiy Pivnyak, Maksim Malyshko, Yuliya Pazynich, Natalia Howaniec, Adam Smolinski

Journal of Sustainable Mining

This study addresses the emergency and operational transient processes that arise when integrating large-scale solar power plants (SPPs) into electrical load nodes, particularly under conditions of limited power system capacity. With the increasing penetration of distributed generation in Ukraine's energy landscape, challenges related to electromagnetic compatibility and harmonic resonance are becoming more prominent. The research builds upon the foundational work of leading Ukrainian scientific schools and focuses on the specific resonance phenomena observed during the operation of solar inverters in medium-voltage networks, especially in regions with high industrial and mining Energy demand. A novel algorithm is proposed for determining the …

Feasibility Study Of Barite Sourcing From Sediments Emerging Due To Treatment Of Waste Water From Coal Mining, Hubert Makuła, Zbigniew Bzowski, Bogusław Michalik

Journal of Sustainable Mining

The accumulation of mine water in settling ponds, which is discharged due to coal mining, allows them to be cleaned out of suspension, and it is the reason for the accumulation of hundreds of thousands of tons of sediments. One interesting mineral enclosed in these sediments is barite, which is considered in the EU as a critical raw material, but it also contains radium originating from formation water.

The effective barite separation and its beneficiation could constitute a win-win solution because then it would be possible to obtain the valuable radium concentrate for further processing, e.g., in nuclear medicine, and …

Wettability Evaluation Via Contact Angle And Data Mining For Enhanced Oil Recovery, Syasya Wadihah Md. Ja’Afar, Bashir Busahmin

Journal of Sustainable Mining

The oil industry has used many enhanced oil recovery (EOR) strategies to increase crude oil production from reservoirs, particularly as production begins to fall. With a significant quantity of hydrocarbon reserves still existing in the reservoirs, improved oil recovery techniques have the potential to increase oil production, with wettability alteration playing a significant role. To date, there has been no comprehensive investigation of wettability in Brunei's sandstone reservoir. The goal of this research is to determine wettability by contact angle measurement and data mining approaches based on the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) algorithm. …

Dynamic Evolution Of Rock Mechanical Properties Of Coal Seam Roofs Under Thermal Loading: A Case Study Of The Baikouquan Area, Xinjiang, China, Sun Fangfang, Li Xin, Sang Shuxun, Qu Huailin, Yang Shuguang, Wei Bo, Wang Ziqiang, Zhang Bin, Chen Yanpeng, Tian Wenling

Coal Geology & Exploration

Objective Underground coal gasification (UCG) represents a key technology for the clean utilization of coal resources. However, during the UCG process, thermal damage to surrounding rocks under thermal effects directly affects the stability and engineering safety of gasification channels.Methods To address the thermal damage to surrounding rocks during UCG, this study investigated the silty mudstones and coarse-grained sandstones in the coal seam roof of the Xishanyao Formation, Baikouquan area, Xinjiang. Through high-temperature uniaxial compression experiments, combined with characterization methods like X-ray diffraction (XRD) and scanning electron microscopy (SEM), this study delved into the dynamic evolutionary patterns of rock mechanical …

Positive And Negative Pressure Distributions And Gas Migration Mechanisms Under Gas Drainage From Coal Seams Using Ultra-Long Directional Boreholes, Li Quanxin, Zhao Yuechen, Mou Quanbin, Wang Liang, Fang Jun, Wang Chenghao

Coal Geology & Exploration

Background Gas drainage via ultra-long directional boreholes plays a significant role in gas control in coal mines. To ensure safe and efficient gas drainage using these boreholes, it is critical to determine the mechanisms behind positive- negative pressure coupling, as well as the dominant mechanisms governing gas migration. However, the evolutionary patterns of positive-negative pressure zoning within the boreholes and the primary factors influencing gas drainage efficiency have yet to be accurately characterized. Methods Under the engineering background of the Shendong Baode Coal Mine, this study developed a multi-field coupling model integrating diffusion, seepage, and in-borehole flow fields based on …

Spatiotemporal Variations And Their Influencing Factors For Vegetation Net Primary Productivity In The Shendong Coal Base, Yang Fei, Cui Kuankuan, Zhang Chengye, Li Jun, Dong Qiulin

Coal Geology & Exploration

Objective The Shendong coal base, located within the arid and semi-arid regions in western China, is identified as the region with the most pronounced contradiction between coal resource development and ecological conservation in the country. Analyzing the spatiotemporal variations in the ecosystem and their influencing factors at the base scale provides a necessary foundation for green mine construction while also offering critical support for regional sustainable development.Methods In this study, the vegetation net primary productivity (NPP) was selected as an indicator for the ecological evaluation of mining areas. By integrating data on terrain, weather and climate, socio-economy, and human …

Soil Microbial Biomass And Organic Carbon Fractions Under Different Natural Restoration Years In Arid Coal Mining Subsidence Areas In Xinjiang, China, Xiao Li, Bi Yinli, Wang Dongdong, Li Jianfeng, Gong Hanlin, Deng Aojuan, Hou Wensheng

Coal Geology & Exploration

Objective This study aims to elucidate the influence of the natural restoration process on changes in soil microbial biomass and organic carbon fractions in coal mining subsidence areas. This effort will provide a crucial scientific foundation for understanding the natural ecological restoration process and carbon accumulation dynamics in arid coal mining subsidence areas.Methods Arid coal mining subsidence areas in Xinjiang, China were investigated in this study. Using the space-for-time substitution approach, sample plots were selected from an unmined area and areas having undergone natural restoration for one, three, eight, and 12 years. Subsequently, systematic analyses were conducted on the …

Application Of A Generative Adversarial Network To Super-Resolution Reconstruction Of Fracture Images In Logging-While-Drilling Electrical Resistivity Imaging, Han Sen, Shen Chuanhai, Xu Chen, Tian Yimeng, Zhao Biao, Wang Ze, Liu Yongkang, Kang Zhengming

Coal Geology & Exploration

Objective Logging-while-drilling electrical resistivity imaging (LWD-ERI) enables the intuitive presentation of geobodies near wellbores in images, representing an important approach to the fine-scale evaluation of stratigraphic parameters while also providing significant geological guidance during the drilling of fractured reservoirs. However, this technique faces the challenge of low image resolution in real-time data processing due to its limited well-to-surface data transmission rates, exerting adverse impacts on the qualitative identification of wellbore fractures and the quantitative evaluation of their parameters. To address this issue, this study proposed a super-resolution image reconstruction method based on a generative adversarial network (GAN), aiming to achieve …

An Experimental Study On The Mechanical Property Evolution Of Granites Post-High-Temperature Treatment Under Loading And Unloading Conditions, Hao Wencai, Qiao Wei, Liu Huichen, Zhu Zhennan, Wang Hao, Liu Richeng, Guo Jie, Xie Jingyu, Cheng Xianggang, Lyu Ruijie

Coal Geology & Exploration

Objective The surrounding rocks of wellbores remain in a state of stress release during the drilling and heat extraction of deep geothermal reservoirs. Therefore, investigating the characteristic stresses of heat-treated granites under loading and unloading conditions is critical to understanding the crack evolution in deep hot dry rock (HDR) reservoirs during their stimulation. Methods Targeting the granite specimens after heat treatment at varying high temperatures (e.g., 200 ℃, 300 ℃, 400 ℃, 500 ℃, and 600 ℃), this study conducted triaxial loading and unloading tests under a confining pressure of 60 MPa, aiming to investigate the impacts of high temperature …

A Method For Fine-Scale Identification Of Collapse Columns Based On Offset Vector Tile Domain Seismic Data, Zhang Guangzhong, Liu Song, Shan Rui, Cai Wenrui

Coal Geology & Exploration

Objectives and Methods The YQ mining area in the Qinshui Basin is characterized by complex seismic and geological conditions, as well as well-developed collapse columns and flexure structures. Consequently, conventional three-dimensional (3D) seismic exploration fails to meet the precision requirements for safe coal mining. By constructing a physical model based on the actual geological conditions of the study area, this study conducted forward modeling for the seismic responses of collapse columns under varying azimuths. Accordingly, the azimuthal anisotropy of the collapse columns were systematically analyzed. By employing a regular noise suppression technique based on curvelet transform, combined with prestack migration …

A Surface Wave Inversion Method Incorporating Interface Constraints And Its Application In The Assessment Of Ground Vibrations Caused By Mining-Induced Seismicity, Li Cheng, Qian Changbao, Liu Ying, Cheng Yi, Ni Shengjun, Yao Huajian

Coal Geology & Exploration

Objective In mining areas of western China, underlying interfaces with significant fluctuations affect seismic exploration accuracy while also posing challenges to the assessment of ground vibrations triggered by dynamic hazards such as mining-induced seismicity. To enhance the characterization of shallow velocity structures and to provide support for dynamic hazard prevention and control in mining areas, this study developed an inversion method incorporating prior information about geological interfaces.Methods A dense array consisting of 489 single-component and 108 three-component seismometers was deployed within a mining area in Longkou Town, Junggar Banner, Inner Mongolia. Accordingly, continuous ambient noise data for about one …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Discovery Of Quasi-Carbon Nanotube Structures In Tectonically Deformed Coals And Their Formation Mechanisms, Li Yunbo, Wang Rongqi, Song Dangyu, Wang Chengtao, Li Qiang, Yi Ke, Wang Yuanyuan, Pan Jienan

Coal Geology & Exploration

Objective Carbon nanotubes (CNTs) have attracted wide attention due to their unique structures and performance. However, their artificial synthesis requires stringent conditions, including high temperatures (700 ℃ to 2 300 ℃), stable carbon sources, and catalysts. Furthermore, these structures are rarely discovered in nature. As a carbon-rich medium, coals can form a variety of ordered carbon structures during their metamorphic and deformational processes, serving as an ideal carrier for exploring the formation mechanisms of natural CNTs.Methods Typical tectonically deformed coals from the Pingdingshan and Huaibei mining areas were investigated in this study. After demineralization and chloroform extraction, coal samples …

Biogasification Potential Of Medium- To High-Rank Coals And Its Controlling Mechanisms At A Molecular Structural Level, Bao Yuan, Li Jiajun, Li Dan, Chen Xueru, Wang Xiaojing

Coal Geology & Exploration

Objective Coals with varying metamorphic grades differ significantly in the potential for methane generation through microbial degradation. Medium- to high-rank coals can generate a substantial volume of methane through microbial degradation. However, key factors governing their biogasification potential remain poorly understood. This study aims to identify the dominant factors controlling the potential of medium- to high-rank coals for methane generation through microbial degradation, as well as relevant controlling mechanisms, from the perspective of molecular structures.Methods The Carboniferous-Permian medium- to high-rank coals along the eastern margin of the Ordos Basin were investigated in this study. Using experiments on the hydrocarbon …

Characteristics And Helium Generation Potential Of Ultra-Deep Marine Shales As Helium Source Rocks, Yuan Jiutao, Zhang Wenjin, Song Zezhang, Tian Xingwang, Luo Qingyong, Jin Shigui, Wang Shulong, Wu Meijia, Wang Li, Chen Hongbin, Gao Jiawei, Mikhail Spasennykh, Tagir Karamov

Coal Geology & Exploration

Objective Large-scale, effective helium source rocks serve as a material basis for the formation of a helium-rich gas field. In the Weiyuan area, Sichuan Basin, the helium-rich gas reservoirs within the Dengying Formation exhibit helium source rocks consisting of the pre-Sinian basement granites and the shales of the Cambrian Qiongzhusi Formation. Compared to the basement granites, studies on the shales of the Qiongzhusi Formation remain limited, including those on the occurrence characteristics of uranium (U)- and thorium (Th)-rich minerals and helium generation potential.Methods This study investigated the shales of the Qiongzhusi Formation, Weiyuan area, Sichuan Basin. By integrating field …

Mechanisms Behind The Controlling Effects Of Temperature-Pressure Conditions On The Dynamic Ch4–H2O Production From Bituminous Coal, Zhang Hewei, Shen Jian, Li Kexin, Wu Caifang

Coal Geology & Exploration

Background For deep coalbed methane (CBM) exploitation, the temperature-pressure synergistic effect in the CH₄-H₂O two-phase flow remains poorly understood, restricting the establishment of efficient CBM production systems.Methods This study investigated the No.13 coal seam in the Guanjiaya Coal Mine along the eastern margin of the Ordos Basin. Using low-field nuclear magnetic resonance (LF-NMR) and nuclear magnetic resonance imaging (NMRI) techniques, this study explored the dynamic process of CH₄ displacing water and associated gas-water production mechanisms under different displacement pressures (2‒8 MPa) and temperatures (25 ℃ and 60 ℃).Results and Conclusions The sample used …

Coupling Mechanisms Of Fracture Propagation And Proppant Transport Indeep Coalbed Methane Reservoirs, Guo Xiaodong, Zhang Shicheng, Zhang Jingchen, Zhou Changjing, Zhang Chengsheng, Qiu Shixin, Xi Xiangrui

Coal Geology & Exploration

Objectives and Methods Deep coalbed methane (CBM) reservoirs commonly exhibit well-developed beddings, strong mechanical heterogeneity, and high in-situ stress gradients. These characteristics result in pronounced nonlinear fracture propagation and strong multi-field coupling effects during hydraulic fracturing. Consequently, it is challenging to accurately describe the mechanisms governing fracture complexity in deep coal reservoirs using conventional mechanical models for fractures. Using a super-large true triaxial system with dimensions of 2.0 m × 2.0 m × 1.0 m, this study conducted physical simulation experiments on hydraulic fracturing under varying injection rates and viscosities of fracturing fluids. In combination with fracture mechanics and energy …

Advances In Research On Mechanisms And Prevention And Control Technologies For Solid-Phase Production In Hydraulically Fractured Coalbed Methane Wells, Zhang Fengsan, Wu Jinqiao, Lin Jin, Li Yu, Zhang Ying, Li Bing, Zhang Guobiao, Sun Ying, Gan Yuke

Coal Geology & Exploration

Background The effective coalbed methane (CBM) exploitation using hydraulic fracturing wells is severely constrained by two major solid-phase production issues: coal fines blockage and proppant flowback. The mechanisms behind both issues are associated with complex interplays between geological conditions and engineering disturbances. This study presents a systematic review of the current status of domestic and international research on the mechanisms of the solid-phase production, as well as relevant prevention and control methods. Furthermore, future research directions are proposed.Advances The solid-phase production in hydraulically fractured CBM wells essentially arises from flow-solid-chemical multi-field coupling processes under interplays between geological conditions and …

Characteristics And Mechanisms Of The Adsorption Of Shales For Ba2+ In Fracturing Fluids, Xie Chenyang, Liu Bo, Zhang Yuting, Zhu Fang

Coal Geology & Exploration

Objectives and Methods Large-scale hydraulic fracturing represents a key technology for shale gas exploitation. However, engineering practices indicate that the flowback rates of fracturing fluids are low and vary significantly across different blocks. Furthermore, some components in fracturing fluids may cause groundwater contamination. To explore the adsorption characteristics and mechanisms of Ba²⁺ within fracturing fluids in shale reservoirs, this study investigated four typical types of samples, including shale and three shale samples with different compositions, from the Longmaxi Formation in the Changning Block, southern Sichuan Basin. Systematic experiments were conducted on the adsorption of shales with different mineral …

Enrichment Patterns And Accumulation Models Of Coalbed Methane Under Complex Geological Conditions: A Case Study Of The Xintian Coal Mine In Western Guizhou Province, China, Xu Shuai, Wu Caifang, Bie Xiaofei, Li Guangsheng, Fang Xiaojie, Wang Fangfang, Cheng Yi, Zhao Peng

Coal Geology & Exploration

Objective The Xintian Coal Mine, a critical coal-producing mine in western Guizhou Province, faces high risks of coal and gas outbursts and the challenge of low underground coalbed methane (CBM) extraction efficiency, necessitating surface CBM extraction. However, the complex geological conditions in the area limit well placement and the fracturing and gas drainage effectiveness. Therefore, there is an urgent need to systematically elucidate the occurrence characteristics and enrichment patterns of CBM in the area.Methods Based on data from exploration boreholes in the Xintian Coal Mine, combined with experiment and test results and log interpretations, this study revealed the physical …

Predicting The Risk Of Water-Sand Inrushes From Coal Seam Roofs Based On A Small-Size Sample Dataset, Zhang Wenquan, Li Zixu, Zhu Xianxiang, Qiu Wei, Zhang Chengjie

Coal Geology & Exploration

Objective The eastern and northern regions of China exhibit thick unconsolidated layers and thin bedrocks, with water-sand inrush disasters occurring frequently. Therefore, accurately predicting the risk of water-sand inrushes from coal seam roofs holds great significance for safe coal mining. However, the water-sand inrushes in these regions exhibit complex disaster-causing mechanisms, which involve the coupling effects of multiple factors. Accordingly, the real-time prediction of the water-sand inrush risk in the field poses challenges including high risk and cost. These issues lead to difficult data acquisition and severely insufficient samples, limiting the accuracy and performance of traditional prediction models. Therefore, there …

Mechanisms Behind The Control Of Floor Failure In Deep Coal Mines By Hydraulic Fracturing Based On Power-Law Fracture Networks, Duan Hongfei, Ye Dayu, Zhao Lijuan, Zeng Yifan, Zou Junpeng, Yu Guofeng, Meng Xiang

Coal Geology & Exploration

Objective Hydraulic fracturing of coal seam floors represents an important technical approach to mitigating damage to the floor rock masses through proactive pressure relief and to improving seepage pathways. However, there is a lack of systematic, quantitative insights into the evolutionary characteristics of floor fracture networks, as well as their impacts on the stress redistribution and rock stability of coal seam floors, during hydraulic fracturing.Methods This study aims to address the challenge that is prone to cause severe damage to the floor rock masses. First, a coal seam floor was considered a saturated porous medium containing multi-scale fractures based …

Comparison Of Models For Predicting The Floor Failure Depths Of Coal Seams With Moderate Thicknesses And Above Under Fully Mechanized Mining, Xu Bin, Zhong Cen, Dong Shuning, Yin Shangxian, Wang Hao, Li Shuxia, Du Yongwei, Zhang Kebin

Coal Geology & Exploration

Objective The failure depth of a coal seam floor represents a critical parameter for assessing the risk of floor water inrushes. With the widespread application of fully mechanized mining with a large mining height, existing empirical equations suffer from insufficient accuracy when used to calculate the mining-induced floor failure depths of coal seams with moderate thicknesses and above.Methods Based on the compressive strength of coal seam floors (i.e., hard, moderately hard, and weak floors), 107 sets of data samples of the measured floor failure depths of coal seams with moderate thicknesses and above under fully mechanized mining were classified. …

A Model For Predicting Coal Mining-Induced Surface Subsidence During Theinitial, Active, And Decline Stages, Zhang Liangliang, Liu Xiya, Cheng Hua, Du Shaoneng

Coal Geology & Exploration

Objectives and Methods Presently, there remains a lack of theoretical models for predicting the coal mining-induced surface subsidence during the initial, active, and decline stages. Given this, this study derived the time-varying exponential function of the ratio of maximum to dynamic surface subsidence first using measured data from seven coal mines. Accordingly, an improved Knothe time function model was established. Then, the impacts of the model parameters on dynamic surface subsidence W(t), subsidence velocity v(t), and subsidence acceleration a(t) were analyzed. Subsequently, based on the improved Knothe model and the critical …

Post-Grouting Subsidence Of The Overburden In Goaves At Major Engineering Sites: Fiber Optic Monitoring And Deformation Mechanisms, Cao Xiaoyi, Liu Xiaoping, Liu Haoqi

Coal Geology & Exploration

Background The characteristics and mechanisms of residual deformations in goaves after engineering reinforcement (i.e., grouting filling) concern the design, construction, and long-term safety of major engineering projects. Furthermore, they are identified as the key to the efficient development of abandoned land in goaves within old mining areas. Therefore, it is necessary to explore methods and techniques for monitoring post-grouting subsidence of the entire strata in goaves. This will help acquire high-quality, long-term monitoring data on deformation in the field and reveal the mechanisms behind deformation associated with post-grouting subsidence in goaves.Methods This study investigated the Xiaohegou Bridge site (including …

A Dynamic Prediction Method For Coal Seam Thickness Based On The Kpca-Pso-Svr Model, Yang Tun, Ye Shugang, Ma Ming, Wang Qianyao

Coal Geology & Exploration

Objectives and Methods With the development of high-precision and intelligent seismic exploration techniques, it is necessary to accurately quantify and interpret coal seam thickness to provide reliable data for constructing high-precision three-dimensional geological models. This will help ensure safe and efficient coal mining in coal mines. In coal seam thickness prediction, the comprehensive multi-attribute analysis method faces challenges such as the cumbersome selection of optimal seismic attributes and the low predictive accuracy of regression models. To address these challenges, this study proposed a support vector regression (SVR) prediction model based on kernel principal component analysis (KPCA) and particle swarm optimization …