Oil, Gas, and Energy Commons^™

Coal Quality & Combustion Impacts On Ash Chemistry, Rod Hatt

World of Coal Ash Proceedings

No abstract provided.

Study To Evaluate Future Ash Beneficial Use, Corina Maria Aldea, Gil M. Haines, Matt Bishop

World of Coal Ash Proceedings

No abstract provided.

Real Time Pore Pressure Monitoring Of Ash And Construction-Induced Responses: The State Of The Practice, Paul C. Schmall, Chris Hardin, Kenneth Campbell, Ryan Smith

World of Coal Ash Proceedings

No abstract provided.

Addressing Public Fear With Facts—Tva Coal Ash Fact Sheets, Melissa Hedgecoth, Lisa Jn Bradley, Rock Vitale, Neil Carriker

World of Coal Ash Proceedings

No abstract provided.

Developing Single Use Deposits Of Coal Derived Fly Ash As A National Resource, Nigel Cooke

World of Coal Ash Proceedings

No abstract provided.

Field And Laboratory Methods To Demonstrate Monitored Natural Attenuation For Coal Combustion Product Constituents In Groundwater, Jim Redwine, Masa Kanematsu, Kristi Mitchell, Dimitri Vlassopoulos

World of Coal Ash Proceedings

No abstract provided.

Six Years Of Service, Supply, And Success: Processing Harvested Ccr From Impoundments, William Fedorka, P.E.

World of Coal Ash Proceedings

No abstract provided.

Beneficial Use Of Fly Ash As A Sustainable Building Material, Randall Stremmel, Thomas Weyand

World of Coal Ash Proceedings

No abstract provided.

Suitability Of Low-Cost Additive Manufacturing For Polymer Electrolyte Fuel Cells, David Alexander

Open Access Theses & Dissertations

The purpose of this dissertation is to study the feasibility of low-cost additive manufacturing to fabricate polymer electrolyte fuel cell bipolar plate materials. Traditional manufacturing techniques include molding, milling, hollow embossing, hydro-forming, rolling, and electromagnetic forming. These processes are employed when a design has been selected due to higher costs at low volumes. The combination of high initial costs and bipolar plates being the most expensive component of the polymer electrolyte fuel cell creates incentive to mitigate this obstacle. The feasibility of low-cost additive manufactured bipolar plates will be proven by fabrication, post-processing, and characterization of printed test specimen. The …

Assessment Of Small-Scale Mechanical Damage On Safety Performance Of Lithium-Ion Batteries, Maher A. Almohammedali

Wayne State University Dissertations

Battery safety studies of Li-ion batteries (LIBs) related to mechanical abusive loadinginvolving contact compression of hard objects, bending and nail penetration usually show that LIBs can withstand some mechanical deformation prior to internal short circuit (ISC). Stress or strain-based criteria has been suggested to understand local conditions between the anode, cathode and the separator due such abusive mechanical loading. A strain-based criterion has also been developed at Wayne State and reported in open literature (Newaz et al.) Focus of such work has been to determine strain levels that may rupture the separator putting in contact the anode and cathode leading …

Supercritical Co2 Recompression Closed Brayton Cycle Analysis, Andres Eduardo Gutierrez Hernandez

Open Access Theses & Dissertations

On this research, the results of an analysis made of a Supercritical Carbon Dioxide (sCO2) Recuperated Closed Brayton Cycle (RCBC) done by performing theorical calculations and comparing it to the results obtained with the use of the software ASPEN Plus will be presented. To demonstrate and determine that this software is a useful tool for modeling the proposed type of cycle, a preliminary comparison was made to verify with previous studies found in literature. A comparison and analysis between the possible working fluids and thermal energy sources was also performed to emphasize the decision of using CO2 as the cycle …

Survey Data On Energy And Fuel Use Of Firms In Economic Zones In The Philippines, Majah-Leah V. Ravago, Raul V. Fabella, Karl Robert L. Jandoc, Renzi G. Frias, J. Kathleen P. Magadia

Economics Department Faculty Publications

The data describe characteristics, operations, utilities, and fuels used in the production of 115 manufacturing and agro-industrial firms in Philippine special economic zones. The data include information on the firm's production, sales, and schedules; electricity sources, requirements, and uses; the importance of various conventional fuels, and the firms’ fuel expenditure in their major production processes. The data also include their employee's aptitude, knowledge, considerations, and opinions on alternative fuels and primary energies, and experiences in using them. The data were gathered through a series of focus group discussions (FGDs) in June 2019 and an online survey conducted in August to …

Economic Feasibility Of Mixed Plastic Waste Pyrolysis Using Twin Reactor System In Northwest Arkansas, Carol Rogers, Patricia Means, Renato Gonzalez, Kaida Sheets, Hayden Townsend

Chemical Engineering Undergraduate Honors Theses

Plastic waste generation is increasing at an unsustainable rate while recycling solutions remain stagnant. As a chemical means of recycling, mixed plastic waste pyrolysis can generate synthetic oil appropriate for use as fuel in power generation from plastic waste that otherwise accumulates in landfills. With the scaling of a commercial plastic pyrolysis process in Northwest Arkansas (NWA) modeled after an operational sawdust pyrolysis unit in Huntsville, Arkansas, economic analysis resulted in 26.3% internal rate of return. Therefore, construction of a commercial mixed plastic-to-fuel pyrolysis plant is economically justified and should be pursued. To effectively implement the proposed design, NWA must …

Sensible/Latent Hybrid Thermal Energy Storage For The Supercritical Carbon Dioxide Brayton Cycle, Kelly Osterman

USF Tampa Graduate Theses and Dissertations

Mitigating the effects of climate change will require rapid deployment of a carbon-free electricity system that includes all available forms of zero-carbon energy. Both renewables and nuclear show great promise, but both come with drawbacks. Power production from wind and solar is limited to times when their respective resources are available, while nuclear is limited in its ability to adjust its output according to the ever-varying demand for electricity. Additionally, the systems must be affordable. One way to reduce the cost of thermal power plants (concentrated solar power and nuclear) is to use new power cycles, such as the supercritical …

Potential Energy Generation From Agricultural Residue In Indonesia, Adrian Rizqi Irhamna

International Programs

Indonesia has great potential of biomass sources from their agricultural residue, which can potentially be used for alternative energy generation. This preliminary research explores the most suitable technology for energy generation from agricultural residue and its challenge for application in Indonesia. The study showed that biomass utilization via the direct combustion process is recommended for energy generation. It is also reported that the pretreatment process of drying and washing, are required to increase the fuel quality and plant efficiency.

Applying Renewable Energies Against Climate Change: Solar Photovoltaic (Pv) Energy, Juan Jose Estribi

International Programs

In recent years, more efforts towards fighting climate change have been done. As a direct response, research and technology have offered several insights regarding the specific causes, effects, and even possible solutions for resolving this global issue. Among these solutions, renewable energies and their potential contributions as clean energy sources can be assessed as feasible options for the energy transformation through the decarbonization process of the energy industry. This poster is mainly focused on solar photovoltaic (PV) energy and its great potential as a renewable energy by making a brief assessment of some important aspects such as resource availability, its …

Feasibility Study On Concentrated Solar Power Plants In Malaysia, De Jen Choy

Student Works (2020-2029)

The rapidly growing economy and population in Southeast Asia has elevated the need for affordable, secured, sustainable and environmentally friendly energy sources. One such energy source is solar energy which is a suitable energy source for most Southeast Asian countries which are within the Sun Belt region. This study performs a performance and financial analysis on concentrated solar power (CSP) technologies, specifically the solar power tower (SPT) in the Malaysian environment through the use of simulation software. The significance of the study lies in the fact that limited research has been done on CSP technologies in Malaysia and the study …

Mental Workload Investigation Among Employees In A Selected Oil And Gas Company, C. Moosom Christyne Surindai

Student Works (2020-2029)

In recent years, there has been a substantial amount of studies being conducted in mental workload and mental health but there is little research conducted in the Malaysian context especially in the oil and gas field. This gives rise to the need for researching the level of mental workload and mental health problems that will help the stakeholders to protect the wellbeing of their employees. This study aims to investigate the mental workload and level of depression, anxiety and stress scale of employees in a selected oil and gas company by using CarMen-Q and DASS-21 mental health assessment tools, finds …

Efficiency Analysis Of Harvesting Solar Energy To Perform Mechanical Work, Haden S. Bragg

Undergraduate Theses and Capstone Projects

The majority of the world’s electricity is generated using fossil fuels; in fact, the United States Energy Information Administration (EIA) states that the U.S. used fossil fuels to generate 62.7 % of its electricity in 2019 [1]. The goal of this research was to create a system that could perform mechanical work using only renewable resources. We built a solar charging station that uses two solar panels to generate electricity and an electric bicycle whose battery can be charged using the charging station. The efficiency for the type of solar cell used in this project is well established. Therefore, in …

An Assessment Of Renewable Energy Technology Implementation In Storrs, Connecticut: Emissions Reduction And Feasibility Of A Microgrid System At Uconn, Sophie Macdonald

Honors Scholar Theses

The purpose of this project is to design a clean energy-sourced microgrid for UConn’s main campus that would reduce the university’s energy emissions while remaining within the geographic boundaries of viable UConn-owned land. Economic cost was not considered in this analysis; instead, emissions and space constraints were the optimized measures of value and feasibility. Sources of energy that were considered include photovoltaics (PV), wind turbines, hydrokinetic systems, and fuel cells. Energy storage capacity was included in the analysis as well. The overall system was optimized first by ignoring space constraints and for a minimum of 10% reduction from the current …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Characterization, Modeling, And Thermal Management Of High-Performance Lithium Batteries, Minjun Bae

Wayne State University Theses

Lithium-ion (Li-ion) batteries, as one of the most advanced commercial rechargeable batteries, play a crucial role in modern society as they are extensively used in portable electronic devices. Nevertheless, the limited electrochemical performance and poor thermal management systems of Li-ion batteries have hindered the expansion of their future applications. In search of alternative electrode materials to develop a battery with higher electrochemical performance, lithium (Li) metal has attracted much attention as an ideal alternative anode material due to its high specific capacity and lowest redox potential. However, needle-like Li dendritic growth causes severe safety concerns and thus prohibits practical applications …

The Effect Of K2co3 Concentration In Kerosene Emulsions On Spray Droplet Sizes For A Magnetohydrodynamic Power Generator, Alejandra Castellano

Open Access Theses & Dissertations

Potassium carbonate (K2CO3) is an effective seeding material to introduce potassium vapor in oxy-fuel combustion to create a conductive plasma. Injecting potassium carbonate before combustion promotes particle volatilization and improves the generation of potassium vapor. This can be achieved by emulsifying a potassium carbonate solution with kerosene. Several studies have investigated creating stable emulsions with kerosene with water by using differing surfactants. However, the effects of using varying concentrations of K2CO3 dissolved in deionized water have not been fully explored. Based on methods of creating successful emulsions, the development of a successful mixture comprised of kerosene and K2CO3 solution is …

Synthesis And Connection Of Iridium Hydrogen Evolution Catalyst To Chlorella Vulgaris Photosystem I For Light-Driven Hydrogen Evolution, Anna Ramirez

Honors Program Theses and Projects

Hydrogen gas has been shown to be a promising energy source as options other than fossil fuels are being looked at in the face of anthropogenic climate change. It is known that anthropogenic climate change is caused by the production of greenhouse gases being let into the atmosphere, specifically a common reason for this is the burning of fossil fuels for energy. The overall goal of this project is to design a biochemical hybrid system that will be used to make H 2 gas and does not require the use of fossil fuels. Burning hydrogen as fuel produces only water …

Modeling Of Buildings With Electrochromic Windows And Thermochromic Roofs, Hua-Ting Kao

USF Tampa Graduate Theses and Dissertations

Air conditioning and heating have increased substantially during the past two decades. According to a survey, buildings consume about 73% of the total electricity in the United States, accounting for 41% of all other energy in the world. At the same time, building skin technologies are constantly improving. Electrochromic and thermochromic are two exciting new technologies that can help reduce the energy consumption of a building. The purpose of this work is to increase our understanding of how much the use of electrochromic (EC) and thermochromic (TC) technologies can reduce the energy consumption of residential and commercial buildings in two …

Design Of Variable Wall Thickness Geometry And Performance Mapping Of Scroll Expanders For Distributed Power Generation, Arun Kumar Narasimhan

USF Tampa Graduate Theses and Dissertations

Low-temperature heat sources such as industrial waste heat, solar, and geothermal are more suitable for small-scale power generation rather than utility scale. In order to maximize the electricity generated from low-temperature heat sources, an efficient expansion device for small-scale power output is necessary. This research work has focused on evaluating the use of a scroll expander and improving its geometrical design for the power output range of 1-25 kW_e.

The first part of the work focusses on modeling the performance of a scroll expander using two non-dimensionless parameters, namely, specific speed and specific diameter. Performance of a scroll …

Using Numerical Models Of Dewatering At Coal Ash Impoundments To Understand Cost And Schedule, Peter Bell, Joel Thompson, Don Fuller

World of Coal Ash Proceedings

No abstract provided.

Investigating Ccr Units And Evaluating The Physical Properties Of Ponded Ccr, David Skeggs, Zahra Aghazadeh, Rachel Combs

World of Coal Ash Proceedings

No abstract provided.

Demonstration Of “No Migration” Alternative Performance Standard For Ccr Facilities In Arid To Semi- Arid Regions Using Unsaturated Zone Modeling, James Aiken, Katy Lindstom

World of Coal Ash Proceedings

No abstract provided.

Coal Combustion Residuals Management Using Geotextile Containers- Considerations For Various Options, Randall Wilcox, Gregg Lebster, Bryan Hamilton, Thomas Stephens

World of Coal Ash Proceedings

No abstract provided.