Oil, Gas, and Energy Commons^™

Modeling Of A Novel Solar Down Beam Test Facility Utilizing Newtonian Optics, Ryan J. Hoffmann

UNLV Theses, Dissertations, Professional Papers, and Capstones

As advances in concentrated solar energy progress there will inevitably be an increase in the demand of resources for testing new conceptions. Currently, there are limited facilities available for taking concentrated solar energy concepts from the laboratory bench scale to the engineering test scale. A proposed solution is a scientific and developmental facility that provides highly concentrated solar energy at ground level. The design presented is a solar down beam test facility utilizing a Newtonian optics approach with a flat rectangular down beam mirror to reflect and concentrate the sun's rays at ground level.

Literature review suggests a hyperbolic reflector …

Modeling Passive Solar Distillation Production In Las Vegas, Nevada, Noe I. Santos

UNLV Theses, Dissertations, Professional Papers, and Capstones

A study has been performed to examine the effects of daily weather on the performance of commercial solar distillation basins (solar stills). The objectives of this study were to evaluate the long term performance of solar stills, to instrument two solar stills and record sub-hourly thermal properties, to evaluate existing heat transfer modeling methods for hourly production, and to create new models to predict daily production using experimental distillate production and local weather data by utilizing artificial neural networks, genetic algorithms, and multivariate regression. A system dynamics model was also created to determine the required basin area and storage volume …

Time-Dependent Crack Growth Behavior Of Alloy 617 And Alloy 230 At Elevated Temperatures, Shawoon Kumar Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Two Ni-base solid-solution-strengthened superalloys: INCONEL 617 and HAYNES 230 were studied to check sustained loading crack growth (SLCG) behavior at elevated temperatures appropriate for Next Generation Nuclear Plant (NGNP) applictaions with constant stress intensity factor (K _max = 27.75 MPa[checkmark]m) in air. The results indicate a time-dependent rate controlling process which can be characterized by a linear elastic fracture mechanics (LEFM) parameter - stress intensity factor (K). At elevated temperatures, the crack growth mechanism was best described using a damage zone concept. Based on results and study, SAGBOE (stress accelerated grain boundary oxidation embrittlement) is considered the primary reason for …

Do Wind Turbines Affect Weather Conditions?: A Case Study In Indiana, Meghan F. Henschen, Brittany Herrholtz, Lacey Rhudy, Kathryn Demchak, Brian Doogs, Joshua Holland, Erik Larson, Johnny Martin, Matthew Rudkin

The Journal of Purdue Undergraduate Research

Wind turbines are becoming increasingly widespread in the United States as the world looks for cleaner sources of energy. Scientists, policymakers, and citizens have strong opinions regarding the positive and negative effects of wind energy projects, and there is a great deal of misinformation about wind energy circulating on the Web and other media sources. The purpose of this study is to gain a better understanding of how the rotation of hundreds of turbines can influence local weather conditions within a wind farm and in the surrounding areas. This experiment measures temperature, atmospheric pressure, wind speed, wind direction, relative humidity, …

Improving The Efficiency Of Organic Solar Cells By Varying The Material Concentration In The Photoactive Layer, Kevin Anthony Latimer

Electrical & Computer Engineering Theses & Dissertations

Polymer-fullerene bulk heterojunction solar cells have been a rapidly improving technology over the past decade. To further improve the relatively low energy conversion efficiencies of these solar cells, several modifications need to be made to the overall device structure. Emerging technologies include cells that are fabricated with interfacial layers to facilitate charge transport, and tandem structures are being introduced to harness the absorption spectrum of polymers with varying bandgap energies.

When new structures are implemented, each layer of the cell must be optimized in order for the entire device to function efficiently. The most volatile layer of these devices is …

Slides: The Costs And Benefits Of Best Management Practices: Insights From The Marcellus Shale, Timothy J. Considine

Best Management Practices (BMPs): What? How? And Why? (May 26)

Presenter: Timothy J. Considine, School of Energy Resources, Department of Economics and Finance, University of Wyoming

15 slides

Slides: Collaborative Planning And Lessons Learned, Matt Sura

Best Management Practices (BMPs): What? How? And Why? (May 26)

Presenter: Matt Sura, University of Colorado Law School

48 slides

Computational Study Of Passive Neutron Albedo Reactivity (Pnar) Measurement With Fission Chambers, Sandra De La Cruz

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Passive Neutron Albedo Reactivity technique (PNAR) was used to assay used nuclear fuel as a potential method for the measurement of fissionable material in fuel assemblies. A Monte Carlo transport code (MCNPX 2.6) was used to develop simulation models to evaluate the PNAR technique. The MCNPX simulated models consisted of two 17x17 Pressurized Water Reactor (PWR) used fuel assemblies; one with an initial 3 wt% uranium-235*, cooled for 20 years and second with an initial 4 wt% uranium-235*, cooled for 5 years. Each used fuel assembly was simulated at four different burn up rates of 15, 30, 45, and …

Thin-Film Fabrication For High Pressure Thermoelectric And Electrical Resistivity Studies, Jorge L. Reynaga, Rama Venkat, Ravhi S. Kumar

Festival of Communities: UG Symposium (Posters)

Thermoelectric materials are of interest for application such as thermoelectric cooler in microprocessors and power generators in cars. High pressure plays an important role in understanding the changes in the figure of merit of thermoelectric thin films. To study the thermoelectric thin films a direct approach is to fabricate the thin film on the surface of a diamond anvil, so that the pressure dependence of structure and transport properties can be investigated easily. If we could successfully fabricate the electrical probes by depositing thin films, then it reduces the use of electrical wires as probes inside the diamond cell, as …

Long Term Outdoor Testing Of Low Concentration Solar Modules, Lewis Fraas, James Avery, Leonid Minkin, H. X. Huang, Tim Hebrink, Robert F. Boehm

Mechanical Engineering Faculty Research

A 1‐axis carousel tracker equipped with four 3‐sun low‐concentration mirror modules has now been under test outdoors at the University of Nevada in Las Vegas (UNLV) for three years. There are three unique features associated with this unit. First, simple linear mirrors are used to reduce the amount of expensive single crystal silicon in order to potentially lower the module cost while potentially maintaining cell efficiencies over 20% and high module efficiency. Simple linear mirrors also allow the use of a single axis tracker. Second, the azimuth carousel tracker is also unique allowing trackers to be used on commercial building …

Keynote 2: The Alberta Oil Sands — Wrestling Bitumen Out Of The Wild North, David Rudolph

North American Energy Water Nexus Roundtable

Athabasca Oil Sand Reserve:

- Oil sands are contained within the Cretaceous McMurray Formation. (149,000 km2)

- 2.5 trillion barrels of extractable oil (~ 25 % of Canada Crude Oil Production)

- Surface mineable deposits cover 2,800 km2

- 450 billion L of process water used annually

- Currently over 130 km2 of tailings ponds (largest man-made structures in the world)

Panel Discussion Presentation: U.S. – Mexico Transboundary Perspectives, Martin J. Pasqualetti

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Mexico Transboundary Perspectives

Principal Question: What are the implications of the energy/ water nexus at the US/Mexico border?

1. Water Supply and Demand

2. Water Costs of Electricity

3. Virtual Water Transfers

4. Renewable Energy Resources

5. Solar/Water nexus at the US/Mexico Border

Panel Discussion Presentation: Regional Politics, International Dreams, Kathryn Furlong

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Canada Transboundary Perspective

The Main Idea:

What are the drivers of hydro-electric development? What are the influences of domestic politics? In what ways are they international?

Panel Discussion Presentation: Columbia River Treaty, Kelvin Ketchum

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Canada Transboundary Perspectives

Slide titles:

- Columbia River Treaty – the setting

- What does the Treaty Do?

- Social & Environmental Costs of the Treaty in Canada

- Treaty benefits and term

- Treaty priorities for water usage

- Example of Flood Control Curves

- Actual Treaty operations

- Supplemental operating agreements

- Treaty Implementation

- Reasons for Treaty Success

Panel Discussion Presentation: Canada-U.S. Transboundary Perspectives, David Rudolph

North American Energy Water Nexus Roundtable

Panel Discussion: U.S.-Canada Transboundary Perspectives

Longest international border in the world: 8,890km, over 3,000km are water!

- Major transboundary river systems (Columbia, Red River)

- 1997 Red River Flood

- Strategies for future power and water needs

- Canadian resource-based economy

Event Program, University Of Nevada, Las Vegas

North American Energy Water Nexus Roundtable

The North American Energy-Water Nexus roundtable was held April 1, 2011, to promote the discussion of how energy and water issues converge in addressing international relations. The roundtable focused on water issues specific to the U.S.-Mexico and U.S.-Canada borders, including stakeholder-driven solutions for water policies and water technologies. The event was co-sponsored by the UNLV Urban Sustainability Initiative; Desert Research Institute; the Canadian Consulate of Los Angeles; and the government of Ontario, Canada.

Embodied Emissions Abatement: A Policy Assessment Using Stochastic Analysis, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Articles

Policymakers traditionally focus on regulating operational energy use in buildings, ignoring other life cycle components such as embodied energy even though this may account for a significant portion of life cycle emissions. Data relating to embodied energy and emissions in buildings is limited. However, stochastic techniques can be used to estimate the distribution of such emissions from buildings. This helps policymakers identify which instruments are appropriate for achieving emissions reductions. A primary aim of this paper is to demonstrate this approach using a sample of apartment buildings in Ireland. A Monte-Carlo simulation suggests that the average probability distribution of embodied …

Measuring Progress With Normalized Energy Intensity, Nathan Lammers, J. Kelly Kissock, Brian Abels, Franc Server

Mechanical and Aerospace Engineering Faculty Publications

Energy standard ISO 50001 will require industries to quantify improvement in energy intensity to qualify for certification. This paper describes a four-step method to analyze utility billing, weather, and production data to quantify a company's normalized energy intensity over time. The method uses 3-pararameter change-point regression modeling of utility billing data against weather and production data to derive energy signature equations. The energy signature equation is driven by typical weather and production data to calculate the 'normal annual consumption', NAC, and divided by typical production to calculate 'normalized energy intensity' NEI. These steps are repeated on sequential sets of 12 …

Improving Compressed Air Energy Efficiency In Automotive Plants: Practical Examples And Implementation, Nasr Alkadi, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

The automotive industry is the largest industry in the United States in terms of the dollar value of production [1]. U.S. automakers face tremendous pressure from foreign competitors, which have an increasing manufacturing presence in this country. The Big Three North American Original Equipment Manufacturers (OEMs)-General Motors, Ford, and Chrysler-are reacting to declining sales figures and economic strain by working more efficiently and seeking out opportunities to reduce production costs without negatively affecting the production volume or the quality of the product. Successful, cost-effective investment and implementation of the energy efficiency technologies and practices meet the challenge of maintaining the …

Identification Of ‘Carbon Hot-Spots’ And Quantification 1 Of Ghg Intensities In The Biodiesel Supply Chain Using Hybrid Lca And Structural Path Analysis, Adolf Acquaye, Thomas Wiedmann, Kuishang Feng, Robert Crawford, John Barrett, Johan Kuylenstierna, Aidan Duffy, Lenny Koh, Simon Mcqueen-Mason

Articles

It is expected that biodiesel production in the EU will remain the dominant contributor as part of a 10% minimum binding target for biofuel in transportation fuel by 2020 within the 20% renewable energy target in the overall EU energy mix. Life cycle assessments (LCA) of biodiesel to evaluate its environmental impacts have, however, remained questionable, mainly because of the adoption of a traditional process analysis approach resulting in system boundary truncation and because of issues regarding the impacts of land use change and N2O emissions from fertiliser application. In this study, a hybrid LCA methodology is used to evaluate …

Correlations Of Capacitance-Voltage Hysteresis With Thin-Film Cdte Solar Cell Performance During Accelerated Lifetime Testing, David S. Albin, Joseph A. Del Cueto

Publications (E)

In this paper we present the correlation of CdTe solar cell performance with capacitance-voltage hysteresis, defined presently as the difference in capacitance measured at zero-volt bias when collecting such data with different pre-measurement bias conditions. These correlations were obtained on CdTe cells stressed under conditions of 1-sun illumination, open-circuit bias, and an acceleration temperature of approximately 100 ºC.

Use Of 2nd And 3rd Level Correlation Analysis For Studying Degradation In Polycrystalline Thin-Film Solar Cells, David S. Albin, Joseph A. Del Cueto, S. H. Demtsu, S. Bansal

Publications (E)

The correlation of stress-induced changes in the performance of laboratory-made CdTe solar cells with various 2^nd and 3^rd level metrics is discussed. The overall behavior of aggregated data showing how cell efficiency changes as a function of open-circuit voltage (V_oc), shortcircuit current density (J_sc), and fill factor (FF) is explained using a two-diode, PSpice model in which degradation is simulated by systematically changing model parameters. FF shows the highest correlation with performance during stress, and is subsequently shown to be most affected by shunt resistance, recombination and in some cases voltage-dependent collection. Large decreases …

Effect Of Hysteresis On Measurements Of Thin-Film Cell Performance, David S. Albin, Joseph A. Del Cueto

Publications (E)

Transient or hysteresis effects in polycrystalline thin film CdS/CdTe cells are a function of pre-measurement voltage bias and whether Cu is introduced as an intentional dopant during back contact fabrication. When Cu is added, the current-density (J) vs. voltage (V) measurements performed in a reverse-to-forward voltage direction will yield higher open-circuit voltage (V_oc), up to 10 mV, and smaller short-circuit current density (J_sc), by up to 2 mA/cm², relative to scanning voltage in a forward-to-reverse direction. The variation at the maximum power point, Pmax, is however small. The resulting variation in FF can be …

High Efficiency, Low Cost Solar Cells Manufactured Using ‘Silicon Ink’ On Thin Crystalline Silicon Wafers October 2009 - November 2010, Homer Antoniadis

Publications (E)

The objectives of Phase I (Feb – Oct 2009) include the development and demonstration of a 17% efficient 25mm x 25mm crystalline Silicon solar cell and a 16% efficient 125mm x 125mm crystalline Silicon solar cell, both produced by Ink-jet printing Silicon Ink on a thin crystalline Sil-icon wafer. To achieve these objectives, processing approaches were developed to print the Silicon Ink in a predetermined pattern to form a high efficiency selective emitter, remove the solvents in the Silicon Ink and fuse the deposited particle Silicon films. Additionally, standard solar cell manufacturing equipment with slightly modified processes were used to …

Hybrid Cooling Systems For Low-Temperature Geothermal Power Production, Andrea Ashwood, Desikan Bharathan

Publications (E)

The overall objective of this investigation is to identify and evaluate methods by which the net power output of an air-cooled geothermal power plant can be enhanced during hot ambient conditions using minimal amounts of water.

Geothermal power plants that use air-cooled heat rejection systems experience a decrease in power production during hot periods of the day. This decrease in power output typically coincides with the time when utilities need power to address high air conditioning loads. Hybrid cooling options, which use both air and water, have been studied for this report to assess how they might mitigate the net …

Creep In Photovoltaic Modules: Examining The Stability Of Polymeric Materials And Components, David C. Miller, Michael D. Kempe, Stephen H. Glick, Sarah R. Kurtz

Publications (E)

Interest in renewable energy has motivated the implementation of new polymeric materials in photovoltaic modules. Some of these are non-cross-linked thermoplastics, in which there is a potential for new behaviors to occur, including phase transformation and visco-elastic flow. Differential scanning calorimetry and rheometry data were obtained and then combined with existing site-specific time-temperature information in a theoretical analysis to estimate the displacement expected to occur during module service life. The analysis identified that, depending on the installation location, module configuration and/or mounting configuration, some of the thermoplastics are expected to undergo unacceptable physical displacement. While the examples here focus on …

"Buried-Anode" Technology Leads To Advanced Lithium Batteries, National Renewable Energy Laboratory

Publications (E)

A technology developed at the National Renewable Energy Laboratory has sparked a start-up company that has attracted funding from the Advanced Projects Research Agency-Energy (ARPA-E). Planar Energy, Inc. has licensed NREL's "buried-anode" technology and put it to work in solid-state lithium batteries. The company claims its large-format batteries can achieve triple the performance of today's lithium-ion batteries at half the cost, and if so, they could provide a significant boost to the emerging market for electric and plug-in hybrid vehicles.

Measuring Degradation Rates Without Irradiance Data, Steve Pulver, Daniel Cormode, Alex Cronin, Dirk C. Jordan, Ryan Smith, Sarah R. Kurtz

Publications (E)

A method to report PV system degradation rates without using irradiance data is demonstrated. First, a set of relative degradation rates are determined by comparing daily AC final yields from a group of PV systems relative to the average final yield of all the PV systems. Then, the difference between relative and absolute degradation rates is found from a statistical analysis. This approach is verified by comparing to methods that utilize irradiance data. This approach is significant because PV systems are often deployed without irradiance sensors, so the analysis method described here may enable measurements of degradation using data that …

Wind Charged Plug-In Hybrid Electric Vehicle, John Patten, Nathan Christensen, Steven Srivastava, Gary Nola

Green Manufacturing Research Journal

With the emergence of electric vehicles (EVs), hybrid vehicles HVs) and plug-in hybrid electric vehicles (PHEVs) from a variety of automotive manufacturers, the electrical grid will need to meet new challenges in supplying the electricity required to charge these vehicles.  To help supply the electricity needed by these vehicles, we compared the electricity consumption of a modified Toyota Prius (PHEV) and the output of a small residential wind turbine over the course of one year.  Our research seeks to determine whether a small residential wind turbine can supply the necessary electricity demanded by the PHEV annually.

The Impact Of Driving Conditions On Phev Battery Performance, Nathan Christensen, John Patten, Steven Srivastava, Gary P. Nola

Green Manufacturing Research Journal

The battery performance of a modified Prius with a 5 kWh plug-in battery was documented for a year to determine the impact of environmental conditions and user attributes on vehicle performance.  Both fuel economy and pure electrical efficiency were compared to ambient temperature.  The fuel economy has a positive relationship with ambient temperature until approximately 70˚F where the efficiency begins to drop.  Electrical performance has a positive linear relationship with ambient temperature.  With the emergence of electric vehicles (EVs) and PHEVs from a variety of automotive manufacturers, information on EV and PHEV performance for consumers will become more important.