Geology Commons^™

Rapid Analysis Of Secondary Manganese Oxides Using Portable Xrf: Applications To Environmental Geochemistry And Mineral Exploration, Dustin Jensen

Graduate Theses & Non-Theses

Secondary manganese oxides (MnOx) are common weathering products of polymetallic vein deposits, and are also locally abundant in streams draining abandoned mine lands. MnOx are scavengers of trace metals, and the trace metal composition of MnOx could potentially be used as a vector to locate mineral anomalies or point sources of pollution in mining-impacted streams. This study is examining the chemistry of MnOx in weathered rock samples and partially flooded underground mine tunnels in the Butte Cu-Ag-Pb-Zn deposit, as well as MnOx crusts on boulders in small streams draining the nearby Basin-Boulder Superfund Site, Montana. Data obtained using a portable …

Temperature And Pressure Sensing In Three Flooded Underground Mine Workings In Butte, Montana, Usa, Tyler Hagan

Graduate Theses & Non-Theses

Temperature and pressure were measured in several flooded underground mine shafts in order to assess the potential for the development of additional mine-based geothermal heating in Butte, Montana, USA. Temperature was sensed using both optical fibers, functioning as a distributed sensor, and thermistors, functioning as point sensors; while pressure was sensed using a piezoresistive strain gauge. Upon observing good agreement between the continuous and discrete temperature sensors, we found no significant change in temperature with increasing depth within the water column. This suggests the thorough transfer of heat throughout the mine shaft via convection. Moreover, we found water temperature (T) …

Development And Application Of A Method For Unwrapping Single Images Of Cylindrical Objects, Aaron Zosel

Graduate Theses & Non-Theses

The goal of this project was to create a software tool to unwrap digital images of cylindrical rock cores and also to create a tool to measure the accuracy of the unwrapping transform.

Measurements of an object can be taken directly from an image if the object is planar and the image plane of the camera is perpendicular to the object. If these conditions are met then picture scale allows a user to relate measurements in the image to a real world coordinate system after correcting for radial distortion. But if the object in the image is not planar or …

Geochemistry And Stable Isotopes Of Surface Water And Groundwater In The Continental Pit In Butte, Montana, Usa, Amber Mcgivern

Graduate Theses & Non-Theses

The Continental porphyry Cu‐Mo mine, located 2 km east of the famous Berkeley Pit lake of Butte, Montana, contains two small lakes that vary in size depending on mining activity. In contrast to the acidic Berkeley Pit lake, the Continental Pit waters have near-neutral pH and relatively low metal concentrations. The main reason is geological: whereas the Berkeley Pit mined highly‐altered granite rich in pyrite with no neutralizing potential, the Continental Pit is mining weakly‐altered granite with lower pyrite concentrations and up to 1‐2% hydrothermal calcite. The purpose of this study was to gather and interpret information that bears on …

Subsurface To Surface Correlation Of The Tensleep Sandstone In The West Flank Of The Pryor Mountains In Carbon County, Montana, William B. Rhyne

Graduate Theses & Non-Theses

The Pennsylvanian Tensleep Sandstone is an eolian and nearshore marine/sabka quartz arenite unit with prominent outcrops along the western Pryor/Bighorn Mountain front east of Red Lodge, MT. Regionally, the formation represents one of the largest ergs in the global geologic record. High permeability makes it an important oil and gas reservoir and aquifer in south central Montana and throughout much of Wyoming. The Tensleep Sandstone’s high percentage of quartz content and grain roundness, due to its eolian origin, makes it a prospective source for natural proppant sand.

Three continuous 4-inch cores were obtained during a cooperative project between Montana Tech …

Secondary Enrichment Of Copper At The Madison Gold Skarn Deposit, Silver Star District, Montana, Christopher H. Gammons, Jill Sotendahl, Dan Everett

Geological Engineering

Secondary Enrichment of Copper at the Madison Gold Skarn Deposit, Silver Star District, Montana. This paper focuses on the chemical reactions responsible for secondary enrichment of copper...we argue that most of the secondary Cu enrichment occurred during a late hydrothermal event that replaced the high temperature skarn mineral assemblage with hematitic jasperoid. Evidence favoring this "hypogene" Cu enrichment hypothesis is presented.

Creating Lakes From Open Pit Mines: Processes And Considerations, Emphasis On Northern Environments, Christopher H. Gammons, Les N. Harris, James M. Castro, Peter A. Cott, Bruce W. Hanna

Geological Engineering

Creating Lakes from Open Pit Mines: Processes and Considerations, Emphasis on Northern Environments. This document summarizes the literature of mining pit lakes (through 2007), with a particular focus on issues that are likely to be of special relevance to the creation and management of pit lakes in northern climates. Pit lakes are simply waterbodies formed by filling the open pit left upon the completion of mining operations with water. Like natural lakes, mining pit lakes display a huge diversity in each of these subject areas. However, pit lakes are young and therefore are typically in a non-equilibrium state with respect …

Effects Of Oxygen Content Of Admitted Gases In Sulfide Flotation, Brian J. Boyle

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Methods Of Studying The Effects Of Frothers, Frank L. Bazzanella

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Studies In Modulation Of Interfacial Reactions For Certain Sulphide Minerals, Robert Owen Beyaert

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Habit Modification Of Naclo3 With Nai, William A. Coghlan

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Production Of Standard-Grade Ferromanganese In An Electric Arc Furnace, Force F. Baney Jr.

Bachelors Theses and Reports, 1928 - 1970

The investigations conducted in this project were essentially concerned with the effects of various compositions of two different slag systems upon the increased recovery of manganese in a standard-grade ferromanganese.

Investigation Of The Ternary System Silver-Aluminum-Indium (Ag-Al-In), Elvin H. Beardslee

Bachelors Theses and Reports, 1928 - 1970

This thesis paper contains material pertaining to & preliminary investigation of the ternary system Ag-Al-In. Procedures in this preliminary investigation are discussed in detail.

Preliminary Examination Of The Aluminum Corner Of The Ternary System Aluminum-Silver-Indium (A1-Ag-In), Jerome J. Blake

Bachelors Theses and Reports, 1928 - 1970

In this paper the author attempts to lay the groundwork for future work on the Al-Ag-In system.

Increased Corrosion Of A 304 Stainless Steel Upon Bending, William C. Tiddy

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Identification Of Nonmetallic Inclusions In Armco Ingot Iron With Polarized Light, Frank E. Panisko

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

The Hydrometallurgy Of Uranium, John E. Cesarani

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Crystal Habit Modification Of Sodium Chlorate, Michael R. Keegan

Bachelors Theses and Reports, 1928 - 1970

All single crystals have a particular habit or morphology. The crystal habit refers to the relative degree of development of crystallographic planes into surfaces which make up the external appearance of the single crystal.

In this paper, NaClO3 is used as a parent crystal. Its simple cubic habit is modified to tetrahedral by the use of impurities of SO4=, S2O3=, Cr2O7=, and NO3-. The degree of habit change is studied as a function of impurity concentration and temperature. The problem and phenomena are explained in terms of surface chemistry and thermodynamics.

Physico-Chemical Principles Of Sixteenth Century Metallurgy, Robert E. Johnson

Bachelors Theses and Reports, 1928 - 1970

Following a review of sixteenth century metallurgical literature and a discussion of Gibbs free energy, this thesis discusses thermodynamic considerations of galena (PbS) reduction by iron from a lead assay of this period. The importance of fluxes in this assay is emphasized. The discussion covers both equilibrium and non-equilibrium conditions at 1100 degrees Celsius. Possible substitutes for iron are also covered.

Information from twenty-one small controlled lead assays is correlated with the thermodynamic discussion to determine the purpose of each constituent in the assay.

The Beneficiation Of Titaniferous-Magnetite Sands, Ronald Lloyd Nordwick

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation of beneficiation methods is to develop and study possible economic methods for recovering an iron-titanium concentrate of sufficient purity to meet metallurgical requirements for subsequent direct reduction to pig iron and a high titanium slag.

Stress-Corrosion Cracking Of Brass, Paul A. Fossey

Bachelors Theses and Reports, 1928 - 1970

the mechanism of stress-corrosion cracking of brass has been sought for many years. Investigators have proposed many mechanisms, but each of these mechanisms has always had several drawbacks. This paper presents an account of experimental work done in the laboratory on this subject and compares it to the work of previous investigations. It evaluates the mechanisms presented by investigators and shows the failures of these mechanisms. A theory of Nitrogen Embrittlement is presented and an evaluation of this theory with experimental work follows.

Experimental Arc Furnace Smelting Of Titaniferous Iron Sands From The Northern Oregon Coast, Allan P. Herring

Bachelors Theses and Reports, 1928 - 1970

This investigation is an attempt to experimentally smelt titaniferous iron sands from the Northern Oregon Coast in a laboratory arc furnace.

The Effect Of Ph Upon Chelation Reactions In Montmorillonite Clays, Joseph Michael Keane

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to investigate several chelation reactions and determine the effect of variable pH upon these reactions.

An Investigation Of The Sintering Of Iron-Wire Compacts, George L. Vivian

Bachelors Theses and Reports, 1928 - 1970

A study of the sintering of iron has been made by observing the rate of bonding of iron wires wound on iron spools. The specimens were sintered at a constant temperature of 850c in vacuum furnaces capable of producing pressures of 10-5 to 10-4 mm of mercury, and the growth of the bond between wires was observed as a function of time.

It has been concluded that the volume-diffusion mechanism is strongly operating in the sintering of iron at 850c, but in an evacuated system, the evaporation-condensation mechanism also contributes to the sintering process.

The Identification Of Montana Clays By X-Ray Analysis, David Stephen Malyevac

Bachelors Theses and Reports, 1928 - 1970

The purpose of this study is to identify the various Montana clay minerals by means of X-ray diffraction. The ultimate aim of this investigation is to identify the different clay mixtures through an analysis of their respective diffraction patterns, and diffraction patterns obtained after various chemical and thermal treatments.

A Study Of The Charles-Mission Canyon Contact, David H. Dahlem

Bachelors Theses and Reports, 1928 - 1970

This study is an attempt to define criteria for picking the Charles-Mission Canyon contact from well-cuttings logs, electric logs and radio-active logs; and all findings are discussed, whether positive or negative. Correlation by electric log was successful from the Cut Bank area to the Cedar Creek anticline but sample logs from the same wells do not agree. The conclusions reached is the point to the unreliability of the sample logs based on well-outtings data.

A Study Of The Geology Of The Mount Humbug Area, Highland Mountains, Montana, Robert Grant Garwood, Charles Wray Hanna

Bachelors Theses and Reports, 1928 - 1970

This report presents a study of the phosphate bed and the associated sediments in the Mount Humbug area which embraces the southern half of T. 1 N., R. & W., and the northern half of T. 1 S., R. 9 W., and the northeast quarter of T. 1 S., R. 9 W. The object of this investigation was to examine and identify the metamorphosed sediments, the surrounding igneous rocks, and the terrace and fluvial deposits of the area.

Geology Of A Portion Of The Hand Mine, Argenta Mining District, Beaverhead County, Montana, John Thomas Richards

Bachelors Theses and Reports, 1928 - 1970

The Hand Mine is located in the Argenta Mining District near the town of Argenta. The area surrounding the Hand Mine is characterized by intense thrusting, folding, and igneous activity. The area mapped by the author is in the southeast portion of the mine and differs from the rest of the mine in that no commercial ore has been found. The writer concludes that the steep faulting and flatlying bodies are of two different ages, and that intense oxidation has altered the ore minerals to plumbojarosite.

Oxidized Copper Mineralization Along The Continental Fault Near Butte, Montana, Theodore H. Eyde

Bachelors Theses and Reports, 1928 - 1970

Located in the fault zone of the Continental fault near the western edge of Boulder batholith of southwestern Montana the oxidized copper deposits are developed by three open pit mines, one of which is a presently in operation. Copper has been deposited by descending cold solutions which have leached copper from the surrounding quartz monzonite and deposited within the crushed fault zone. Local high grade 'bunches' of ore occur along narrow limonite veins, remnants of primary sulfide veins which have been enriched by the descending cold solutions.

The Design And Construction Of An Electrolytic Cell For Aluminum Reduction, Thomas H. Melrose

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation was to design and construct a laboratory size electrolytic cell in which to reduce alumina, using the same basic materials that are used in a commercial size cell. The cell was designed to have a capacity of approxi­mately 100 grams of metallic aluminum produced every 8 hours. The cell was constructed so it could be operated continuously.