Chemistry Commons^™

The Synthesis And Application Of Polyglyoxylamides, Quinton Ea Sirianni

Electronic Thesis and Dissertation Repository

Self-immolative polymers (SIPs) are a subset of degradable polymers that can be triggered to fully depolymerize with a single stimulus event. This amplifying behaviour makes them ideal for real-world applications including sensors, recyclable plastics, and drug delivery vehicles. Polyglyoxylates (PGs) are a class of SIPs that can be synthesized in a one-pot reaction and designed to respond to different stimuli including light, heat, reduction, and oxidation. However, with the exception of poly(ethyl glyoxylate) (PEtG), the various glyoxylate monomers must be prepared and purified before polymerization, which can be difficult. Furthermore, PGs typically possess properties such as water-insolubility and low glass …

Self-Immolative Polymers As A Degradable And Triggerable Class Of Surfactants, Siamak Keshtpour

Electronic Thesis and Dissertation Repository

Self-immolative polymers (SIPs) are degradable polymers that undergo end-to-end depolymerization upon triggering. They have potential for the development of degradable surfactants addressing human and environmental toxicity concerns associated with non-degradable surfactants, but they have not yet been investigated as surfactants. Herein, polyglyoxylamide SIPs with different pendent groups and end-caps were synthesized, envisioning they could serve as depolymerizable analogues of poly(vinyl alcohol) and its derivatives. Polyglyoxylamides with pendent hydroxyls stabilized both PEA and PLA particle suspensions. They showed the potential to undergo triggered degradation, resulting in destabilization of the suspensions. However, untriggered suspensions exhibited poor long-term stability, so further structural tuning …

Development Of A Route To Functional Polymers Via Click Chemistry, Kyle Classen

Electronic Thesis and Dissertation Repository

Functional polymers are desirable due to their use in applications such as drug delivery and bioimaging. This work describes the development of a functional polymer template, expanding upon current routes to creating functional polymer libraries. The methodology utilizes a masking-unmasking strategy to protect and then reveal a strained alkyne for the introduction of functional entities via post-polymerization modification.

The synthesis and characterization by high-resolution mass spectrometry as well as ¹H NMR, UV-Vis, and FT-IR spectroscopy of a masked strained alkyne monomer is presented. First, the strained alkyne, masked by a cyclopropenone moiety, was synthesized. Next, a norbornene derivative was …

Synthesis Of Stable Organic Radical Homo- And Co-Polymers And Their Applications In Solid-State Devices, Michael Anghel

Electronic Thesis and Dissertation Repository

This thesis outlines the synthesis and characterization of a stable organic radical homopolymer incorporating nitronyl nitroxide radicals, as well as the synthesis and characterization of random and block co-polymers incorporating nitronyl nitroxide and 6-oxoverdazyl radicals.

The nitronyl nitroxide homopolymer was synthesized using ring-opening metathesis polymerization (ROMP), yielding polymers with controlled molecular weights and narrow molecular weight distributions. Studies of polymer growth as a function of time and monomer:catalyst ratio revealed the ROMP to be well-behaved. Spectroscopic analysis of the polymer showed that the radicals possessed high radical content, indicating that they are tolerated by ROMP. Conductivity studies of thin-films made …

Synthesis Of Polycarbamate‒Based Nanoassemblies And Previously Inaccessible Polyglyoxylates, Rebecca Yardley

Electronic Thesis and Dissertation Repository

Self-immolative polymers (SIPs) are a subclass of degradable polymers that can be triggered to depolymerize when exposed to a specific stimulus. The main advantages of SIPs are the controlled and predictable depolymerization, signal amplification, and tunability of the polymer regarding which stimuli it responds to. The work presented in this thesis details the synthesis, characterization, and applications of two different families SIPs: polycarbamates (PCBs) and polyglyoxylates (PGs). PCBs are known to have depolymerization rates that are sensitive to environmental conditions surrounding them. In efforts to modify the depolymerization, PCB was incorporated into amphiphilic diblock copolymers, first with multi-stimuli-responsive poly(2-(dimethylamino)ethyl methacrylate) …

Progress Toward Durable Icephobic Materials, Matthew J. Coady

Electronic Thesis and Dissertation Repository

Ice accumulation is a major engineering challenge in many fields including aerospace, power generation, transportation, and infrastructure. A variety of solutions are being researched to address this challenge. Perhaps the most promising method of combating ice accumulation is by applying coatings with low values of interfacial ice adhesion strength, τ_ice. Icephobic materials are those with ice adhesion below 100 kPa, and it has been shown that passive delamination can occur on surfaces with τ_ice below 20 kPa. While various low adhesion surfaces have been prepared, durability concerns pervade applications where surfaces experience repeated icing or freeze-thaw cycles, …

Methodologies For Metal Functionalization Of Phosphorus Based Photopolymer Networks, Vanessa Béland

Electronic Thesis and Dissertation Repository

Photopolymer networks with phosphonium cation, alkyl phosphine and olefin functionality were designed, synthesized and functionalized with metals by metathesis, coordination and hydrometallation reactions, respectively. The materials were strategically designed so that the metal functionalization step could be monitored and quantified. In some cases, this involved characterization by IR, NMR, or X-ray spectroscopic techniques, or by comparison to molecular analogues. It was found that by using a bi-functional photopolymer network, the material could be bi-metallized by orthogonal mechanisms. All metallized polymer networks were tested for their suitability as precursors to metal-containing ceramics. The polymers were pyrolyzed, and on analysis it was …

Synthesis Of Crosslinkable Poly(Ester Amide)S For Cell Encapsulation And Delivery, Yu Ting (Natalie) Liang

Electronic Thesis and Dissertation Repository

Tissue engineering using adipose-derived stromal cells (ASCs) shows promise for soft tissue regeneration. Biodegradable polymers are potential biomaterials as they support the growth and delivery of cells. Specifically, poly(ester amide)s (PEAs) are a class of biodegradable polymers with tunable structures that have been shown to exhibit low cytotoxicity and support the growth of various cell types. This thesis involved the development of new water soluble amino acid-based PEAs with crosslinkable moieties to enable formation of hydrogel scaffolds for ASC encapsulation. These hydrophilic phenylalanine-based and alanine-based PEAs were synthesized by solution polycondensation and photo-crosslinked into a series of hydrogels with and …

Development Of In Situ Forming Hydrogels For Intra-Articular Drug Delivery, Andy Prince

Electronic Thesis and Dissertation Repository

Hydrogels are 3-dimensional crosslinked polymer networks that can absorb significant amounts of water. The physical properties associated with hydrogels affords them resemblance to biological tissues making them good candidates for biomedical applications. Many pharmaceuticals, specifically non-steroidal anti-inflammatory drugs (NSAIDs), have poor aqueous solubility, which limits their bioavailability and efficacy. People suffering from chronic osteoarthritis (OA) are required to frequently take large doses to mitigate pain, which can lead to serious side effects. Hydrogels are good strategies to deliver NSAIDs via articular injection because they can form solid gels in situ. This thesis describes the synthesis, formulation, mechanical testing, in …

Plant Stimuli-Responsive Biodegradable Polymers For The Use In Timed Release Fertilizer Coatings, Spencer Heuchan

Electronic Thesis and Dissertation Repository

The use of nitrogen-based fertilizers continues to accelerate with human population growth and increases in global food requirements. Enhanced efficiency fertilizers (EEFs) have been developed to improve the synchronization between nutrient supply and crop nutrient demand. However, many of the current controlled release fertilizers are coated with non-degradable polymers that contribute to accumulation of microplastics within ecosystems. This thesis describes research towards the development of a new class of fertilizer coatings using a self-immolative polymer known as poly (ethyl glyoxylate) (PEtG). PEtG itself does not have suitable properties to produce a viable coating but once blended with another degradable polyester …

Effects Of High Pressure On Photochemical Reactivity Of Organic Molecular Materials Probed By Vibrational Spectroscopy, Jiwen Guan

Electronic Thesis and Dissertation Repository

Chemical transformations of molecular materials induced by high pressure and light radiation exhibit novel and intriguing aspects that have attracted much attention in recent years. Particularly, under the two stimuli, entire transformations of molecular species can be realized in condensed phases without employing additional chemical constraints, e.g., the need of solvents, catalysts or radical initiators. This new synthetic approach in chemistry therefore satisfies increasing need for production methods with reduced environmental impacts. Motivated by these promises, my Ph. D thesis focuses on this state-of-the-art branch of high-pressure photochemistry. Specifically, high pressure is employed to create the necessary reaction conditions to …

The Incorporation Of Phosphorus Into Block Copolymers And Their Self-Assembly, Benjamin F. Hisey

Electronic Thesis and Dissertation Repository

The content of this thesis focuses on the incorporation of phosphorus into amphiphilic block copolymers (BCPs) for the realization of novel properties in the solution phase self-assembled materials derived from the BCPs. The incorporation was achieved through either attaching phosphorus to the terminus of already existing BCPs or the synthesis of novel BCPs from prepared or commercially available phosphorus containing monomers. The phosphorus containing polymers exhibited properties dependent on the existence of the phosphorus species in the BCPs. The first example of this is the modification of poly(ethylene oxide)-b-poly(ε-caprolactone) (PEO-b-PCL) copolymers by the attachment of tetraalkyl …

Glycopolymer Functionalization Of Polymersomes, Josh Jadischke

Electronic Thesis and Dissertation Repository

Carbohydrates are important to cellular communication, recognition, and pathogenesis, making them a useful synthetic target for application in therapeutics and diagnosis. Synthetic carbohydrate presenting scaffolds can replicate or interrupt the binding interactions that occur in nature. Due to the weak nature of the monosaccharide-protein bond, most carbohydrate presenting scaffolds display saccharides in a multivalent manner to improve binding. Recently there has been an effort to combine carbohydrate containing scaffolds with polymersomes (vesicles composed of polymers), due to the structural resemblance of polymersome membranes to biological membranes. This thesis describes the progress towards functionalizing polymersomes with linear glycopolymers as a potential …

Poly(Ethyl Glyoxylate) Solid-Core Particles For Drug Delivery, Michael Thomas Gambles

Electronic Thesis and Dissertation Repository

The ability to trigger the degradation of polymeric nanoparticles (NPs) by a specific stimulus can provide a method of improved drug targeting and selective release capabilities in vivo. The challenge for most polymeric drug delivery systems remains the necessity for many stimuli events to trigger the release of cargo. Polymeric nanotechnology containing “self-immolative polymers” looks to alleviate the reliance on high concentrations of stimuli by undergoing complete end-to-end depolymerization via a single stimulus-mediated reaction of an end-cap. Herein, NPs were developed using poly(ethyl glyoxylate) (PEtG) blended with poly(d,l-lactic acid) (PLA) to encapsulate a hydrophobic cargo to be released upon …

Molecular And Polymeric Materials Based On Asymmetrically Substituted Bf2 3-Cyanoformazanates, Samantha Novoa

Electronic Thesis and Dissertation Repository

This thesis outlines the synthesis and characterization of asymmetric and symmetric 3-cyanoformazanate BF₂ complexes and their incorporation into polymers. CuAAC chemistry was used to synthesize two additional asymmetric BF₂ complexes and a side product that was identified as a symmetric dimer. Spectroscopic and electrochemical properties of these compounds are described.

Incorporation of an asymmetric 3-cyanoformazante BF₂ complex into polymers was done by ROMP. This reaction was used to make homo, block, and random copolymers, where the comonomer was an organic norbornene derivative. Spectroscopic studies of these polymers revealed that, as the mole fraction of BF₂ (ƒ …

Synthesis Of Metal-Containing Phosphines And Their Use In Coordination, Polymer, And Materials Chemistry, Amir Rabiee Kenaree

Electronic Thesis and Dissertation Repository

This thesis describes the investigation of a novel strategy for the synthesis of metal-containing small molecules, polymers, and nanomaterials. In this context, a new family of air-stable, homo- and heterometallic primary, secondary, and tertiary phosphines were prepared via the radical-initiated hydrophosphination reaction of PH₃ with vinylferrocene and/or vinylruthenocene. The full characterization of the phosphines confirmed their targeted structures and proved that the properties of the starting metallocenes are reflected in those of the resulting phosphines.

To study the coordination behavior of this family of phosphines, primary, secondary, and tertiary ethylferrocene phosphines were reacted with Group 6 metal carbonyl adducts …

Creating Functional Materials With Phosphorus, Tyler John Cuthbert

Electronic Thesis and Dissertation Repository

Understanding the relationship between small molecules or polymers and how they affect the properties of materials they compose is the basis of materials science. Using unique and versatile components can impart useful and interesting properties to materials. Here, we aimed to extend this understanding to phosphorus, and the known properties it possesses. This included the production of photopolymerizable coatings containing phosphonium molecules and polymers for antifouling and antibacterial applications. The synthesis and characterization of these phosphonium components was completed and materials were produced utilizing UV curing technology. Addition of these components produced coatings that could resist bacteria attachment and efficiently …

Synthesis Of Metal-Containing Polymers And Stable Organic Radical-Containing Polymers And Their Use As Advanced Functional Materials, Joseph A. Paquette

Electronic Thesis and Dissertation Repository

The work presented in this thesis details the synthesis and characterization of two different families of multifunctional polymers. The first family involved the incorporation of stable 6-oxoverdazyl radicals into polymer scaffolds. This was originally achieved by the polymerization of the radical precursors, phenyl- and isopropyl-6-oxotetrazanes, followed by post-polymerization oxidation to afford the phenyl- and isopropyl-6-oxoverdazyl polymers. A second methodology involved the direct polymerization of isopropyl-6-oxoverdazyl radicals using ring-opening metathesis polymerization (ROMP) to afford polymers with controlled molecular weights and narrow molecular weight distributions. The polymers were characterized by the close comparison of the physical and spectroscopic properties …

Self-Assembly And Stimuli-Responsive Properties Of Amphiphilic Self-Immolative Block Co-Polymers, Thomas Mackenzie Gungor

Electronic Thesis and Dissertation Repository

In recent years, degradable polymers have become increasingly researched for their applications in drug delivery systems, adhesives, and tissue engineering. Self-immolative polymers (SIPs) are of particular utility due to predictable end-to-end backbone depolymerization after a stimuli-responsive end-cap cleavage. There are examples of incorporating a hydrophobic SIP into an amphiphilic block-copolymer, followed by self-assembly in aqueous media forming various nanoparticle morphologies. However, their self-assembly behaviour has not been described in detail, and there are no general synthetic methods that allow for their synthesis with good control over the relative hydrophilic block ratio, the major factor controlling their morphology. This thesis presents …

Exploring The Chemistry Of Phosphorus For Photopolymer Applications, Ryan Guterman

Electronic Thesis and Dissertation Repository

Prior to this thesis, phosphorus-containing polymers and photopolymerization represented two distinct, non-overlapping fields of study. This thesis examined the prospect of combining these two approaches to create a system possessing the benefits of both techniques. By exploiting the chemistry of phosphorus, and using photopolymerization as a fabrication method, new materials were developed and assessed for their use in various applications.

Among the many phosphorus compounds that may be used in polymer science, phosphonium salts and primary phosphines were of specific focus. First, highly fluorinated phosphonium monomers were developed to create photopolymerized hydrophobic surfaces. A structure-activity relationship was established, as both …

Exploring The Chemistry Of Η5-Cyclopentadienyl-Cobalt-Η4-Cyclobutadiene Containing Polymers; Synthesis, Properties, And Self-Assembly, Mahboubeh Hadadpour

Electronic Thesis and Dissertation Repository

Metal containing polymers (metallopolymers) bring together the synthetic efficiency and versatility of conventional organic polymers with unique redox, responsive, and catalytic properties of inorganic metals. Over the last decade, metallopolymers have gained increased attention because of their unique physical and chemical properties that arise from the incorporation of metal centers into a polymer. Since the first report on a metallocene-based metallopolymer in 1955, there has been growing interest in this class of material. Ferrocene-based metallopolymers represent the vast majority of metallocene containing polymers in the literature. In 1992, the Manners Group established a major milestone in the field of metallopolymers …

Production And Applications Of Formaldehyde-Free Phenolic Resins Using 5-Hydroxymethylfurfural Derived From Glucose In-Situ, Yongsheng Zhang

Electronic Thesis and Dissertation Repository

The phenol-formaldehyde (PF) resin manufacturing industry is facing a growing challenge with respect to concerns over human health, due to the use of carcinogenic formaldehyde and sustainability due to the use of petroleum-based phenol in PF resin manufacture. Glucose and its derivative, 5-hydroxymethylfurfural (5-HMF), have proven to be potential substitutes for formaldehyde in the synthesis of phenolic novolac resins.

This thesis investigated a number of glucose and 5-HMF resin systems including the curing of phenol-glucose novolac resin (PG) with a bis-phenol-A type epoxy. The curing process was modeled according to the Sestak-Berggren equation (S, B) using Málek methods. This was …

Polyglyoxylates: A New Class Of Triggerable Self-Immolative Polymers, Bo Fan

Electronic Thesis and Dissertation Repository

Self-immolative polymers, which degrade by an end-to-end depolymerization mechanism in response to the cleavage of a stabilizing end-cap from the polymer terminus, are of increasing interest for a wide variety of applications ranging from sensors to controlled release. However, the preparation of these materials often requires expensive, multi-step monomer syntheses and the degradation products such as quinone methides or phthalaldehydes are potentially toxic to humans and the environment. We demonstrate here that polyglyxoylates can serve as a new and versatile class of self-immolative polymers. Polymerization of the commercially available monomer ethyl glyoxylate, followed by end-capping with a 6-nitroveratryl carbonate provides …

Poly(Ester Amide) And Poly(Ethyl Glyoxylate) Nanoparticles For Controlled Drug Release, Amira Mohamed Moustafa

Electronic Thesis and Dissertation Repository

The objective of this research was to develop polymeric nanoparticles (NPs) having improved drug release properties for drug delivery. Poly(ester amide)s (PEAs) are promising biodegradable polymers. PEA NPs were prepared via emulsification-evaporation and salting-out methods and optimized through by varying different processing parameters. Polymer-model drug conjugates based on PEAs containing L-aspartic acid and rhodamine B were synthesized and used for NP preparation. Release behavior was studied and compared to a control system with physically encapsulated rhodamine B. It was shown that the release of rhodamine B from the covalent system did not show the burst effect and exhibited a slower …

Synthesis Of Carbohydrate Functionalized Dendrons For Use As Multivalent Scaffold And In Self-Assembled Structures, Namrata Jain

Electronic Thesis and Dissertation Repository

Carbohydrates are implicated in a large number of biological processes ranging from cell-cell interactions to bacterial and viral infection. Lectins are carbohydrate-binding proteins that are generally specific for certain sugars. However, typical carbohydrate–lectin interactions tend to have very low monomeric binding affinities. In many cases, the binding of saccharide ligands by protein receptors can be improved significantly through the attachment of multiple saccharide residues to a common support. Dendronized polymers constitute a class of macromolecules whose nanoscale size, rigidity, and functionality can be controlled with precision by tuning their molecular architecture. It is hypothesized that due to their large size …

Development Of Biodegradable And Stimuli-Responsive Macromolescules And Their Assemblies, Ali Nazemi

Electronic Thesis and Dissertation Repository

Polymersomes are potentially multifunctional soft materials constructed by the self-assembly of amphiphilic block copolymers in aqueous medium. While much research has focused on controlling the assembly and encapsulation properties of polymersomes, their surface functionalization has been relatively unexplored. This is important because it plays a critical role in determining their properties such as toxicity and biodistribution behavior. The work described in this thesis involves the development of a biocompatible and biodegradable polymersome systems based on poly(ethylene oxide)-b-polycaprolactone (PEO-PCL) block copolymers with azide surface groups as a novel scaffold for various biomedical applications. The surface functionalization of these polymersomes …

Degradation Kinetics And Functional Design Of Linear Self-Immolative Polymers, Ryan A. Mcbride

Electronic Thesis and Dissertation Repository

Linear self-immolative polymers display a potential to address many of the limitations in the control over the degradation process in traditional biodegradable polymers. These materials are unique relative to most degradable 
polymers, in that they undergo end-to-end depolymerization in
 response to the cleavage of a stabilizing end-capping agent. Although one of their cited 
attributes is a dependence of their degradation time on chain length, no conclusive study has been conducted to demonstrate and study this 
effect. Using a previously reported linear self-immolative backbone derived from alternating 4-hydroxybenzyl alcohol and N,N’-dimethylethylenediamine spacers, this work offers the first conclusive study demonstrating …

Butyl Rubber-Aliphatic Polyester Graft Copolymers For Biomedical Applications: Synthesis And Analysis Of Chemical, Physical And Biological Properties, Bethany A. Turowec

Electronic Thesis and Dissertation Repository

Biomaterials can be used in a wide variety of medical applications owing to their breadth of characteristics that can be imparted by varying their chemical structures. Butyl rubber (IIR), which is a copolymer of isobutylene (IB) and small percentages of isoprene (IP), is particularly attractive as a biomaterial because of its elastomeric mechanical properties, biocompatibility, impermeability and high damping characteristics. IIR is typically vulcanized through chemical-based crosslinking mechanisms. However, these methods are not acceptable for biological applications. This thesis focuses on the synthesis of IIR-polyester graft copolymers by grafting biodegradable and biocompatible polyesters including poly(caprolactone) (PCL) and poly(d,l-lactide) (PDLLA) to …

Carbon Nitride And Conjugated Polymer Composite Materials, Josh Byers

Electronic Thesis and Dissertation Repository

The semiconductor and photovoltaic properties of carbon nitride (CNx) thin films prepared using a reactive magnetron sputtering technique were investigated both individually and as composites with the organic conjugated polymers polybithiophene (PBT) and poly(3-hextlthiophene) (P3HT). At low nitrogen content, the film structure was dominated by graphitic sp² percolation networks, whereas at higher nitrogen contents CNx films started to demonstrate semiconductor properties, as evidenced by the occurrence of photoconductivity and the development of a space charge region. When CNx was deposited onto a PBT substrate, it was found to function as an acceptor material improving the photocurrent generation both in …

Carboxylic Acid Functionalized Butyl Rubber: From Synthesis To Applications, Matthew John Mceachran

Electronic Thesis and Dissertation Repository

Butyl Rubber (RB) is a copolymer of isobutylene (IB) with small percentages of isoprene (IP). Typically these IP units serve as sites for the covalent cross-linking of the rubber, but they can also serve as sites to further functionalize RB. These modifications can expand the potential applications of RB. This thesis describes the synthesis of carboxylic acid functionalized RB and some properties and applications of these materials.