Physical Sciences and Mathematics Commons^™

Use Of Thermodynamic Models For Optimizing Fuel Treatment Processes, Shawn Pj Kirby, Andrew Guenthner

STAR Program Research Presentations

Dyes are often added to fuels for tax purposes, but they cause degradation of the fuels. It would be advantageous to remove the dyes prior to their use in critical aerospace applications. Current technologies vary in the efficiency with which they can remove unwanted dyes from fuel sources. We have used Hansen Solubility Parameters to develop an “ideal solvent” that can be used to extract these dyes from fuel. This will also be applied to removal of sulfur compounds from fuels. Sulfur compounds in fuels create sulfates during combustion, which in turn react with water to make sulfuric acid. Sulfuric …

Re-Healable Coating Based Upon Thermally Responsive Linkages, Dahlia Ningrum Amato

Master's Theses

The goal of this thesis was to design thermally responsive polyol resins that would be compatible with isocyanates. Two approaches were made to reach this goal, the first involved functionalizing soybean oil and the second involved post-polymerization modification of a methacrylate based resin.

A soybean based coating with thermally responsive Diels-Alder linkages has been prepared following an automotive two-component formulation. The resulting coatings displayed the capability to be healed following physical deformation by a thermal stimulus, and such a material has significant potential for end users. Various curing agents were employed, and resulted in variation of scratch resistance and re-healablity. …

Latent Cysteine Residues From Polymers Prepared Via Free And Controlled Radical Polymerizations, Douglas Vincent Amato

Master's Theses

One less commonly used “click” reaction is thiazolidine chemistry. Thiazolidine chemistry is a commonly used reaction used in biological systems because the reaction requires the presence of both cysteine (a common amino acid) and an aldehyde or ketone. If cysteine residues could be incorporated into a polymer then a variety of applications could be developed. Polymers containing free thiols (aka thiomers) have developed in the last decade to become great mucoadhesives. If there was a facile route to control the amount of free thiols along the polymer then more fine-tuned and potentially stronger adhesives could be made. For these reasons …

The Effects Of Color Concentrates On The Rheology Of Tint Bases, Doug James Herrick

Master's Theses

ABSTRACT

THE EFFECTS OF COLOR CONCENTRATES ON THE RHEOLOGY OF TINT BASES

Douglas James Herrick

Waterborne coatings are formulated with a number of different ingredients; water, latex polymers, pigments, surfactants, dispersants, defoamers, biocides, coalescing aids, and rheology modifiers or thickeners. Rheology modifiers are necessary in order to improve the physical properties of the coating before, during, and after application to a substrate. There are two kinds of rheology modifiers used in waterborne coatings; associative thickeners and non-associative thickeners. Coatings formulated with associative thickeners are quite sensitive to coating variations; the slightest change in the formulation has profound effects on the …

Synthesis And Characterization Of Graphene Oxide, Jeremy A. Waddell, Arthur Cheng, Bin Chen

STAR Program Research Presentations

Graphene, a single atomic layer of sp² carbon atoms, has gotten a lot of attention from the scientific community because of its excellent mechanical and electronic properties. The mechanical exfoliation methods used to obtain graphene nanosheets are not effective for large scale manufacturing, so scalable synthesis approaches from structurally similar compounds are of great scientific interest. Graphene oxide is one such compound which is synthesized through the oxidation of graphite powder. The oxidation was performed using a modification of the previous experimental procedure. After synthesis, the powder was fabricated into graphene oxide films through vacuum filtration and transfer to …

The Development Of Transparent, Processable, Thermally-Responsive Coatings, Christopher David Roland

Master's Theses

Polymer matrices are commonly used as guest-host systems for organic chromophores for use in non-linear optical materials. The chromophores must be aligned or poled in an electric field in order to impart anisotropy and non-linear activity to the material. This poling process raises several issues, the two largest being the eventual relaxation of the chromophores back into random orientations due to brownian motion, and high molecular weight polymer matrices limiting chromophore mobility during poling. The prevention of this relaxation process is an area of significant interest, especially in applications that require long term coating stability and activity. In this study, …

Development Of A Quantitative High Throughput Method For The Early Detection Of Corrosion On Coated Aluminum, Jeffrey Clayton Foster

Master's Theses

Eight fluorescent indicators were evaluated for their ability to detect the corrosion of aluminum metal substrates. The fluorophore Rhodamine-salicylaldehyde (RSA) was selected as a candidate for further study based on its ability to bind and detect aluminum ions at low concentrations, its selectivity for aluminum ions, its long-term stability, its solubility in our solvent-based epoxy formulation, and its compatibility with our testing method.

A recent publication suggested that an alternative method of fluorescence activation was possible—an acid-promoted ring opening that occurred in the absence of metal ions. To prove the capability of RSA to bind aluminum ions, thorough ¹H …

Synthesis Of An Antimicrobial Textile Coating, William M. Morris

Chemistry and Biochemistry

A titania nanosol was synthesized and coated onto nylon/cotton blended textile substrates. The substrates were characterized via SEM for adhesion and nanoparticle formation, then subjected to antimicrobial efficacy tests. The titania nanosol was successfully coated on to textiles samples. Particles were observed to be around 2 by 3 micrometers and formed between the interstitial space of textile fibers. Although larger than typical nanoparticles, the coatings exhibited what seemed to be antimicrobial activity. Titania nanosol coated textile samples were subjected to Kirby Bauer Assay in the presence of S. aureus. The coated textile sample exhibited an inhibition of growth around its …

Vapor Liquid Solid Growths Of Germanium And Gallium Antimonide Nanowires, Ralph Alvarez, Esmeralda Arreola, Michael Oye, Meyya Meyyappan

STAR Program Research Presentations

Determining the optimal growth parameters for germanium (Ge) and gallium antimonide (GaSb) nanowires is the focus of this research. Given the fact that nano materials behave differently from their bulk counterparts we are researching some variables that influence nanowire diameter and length such as temperature, ramp rate, gas flow rate, and catalyst particle size. Based on the nano material size which is typically a few 10s of nanometers wide, these nano materials can be engineered to take advantage of their optical properties. Specifically the infrared (IR) response of Ge and GaSb nanowires are directly controllable based on their geometry. Fine …

Effects Of Ambient Gases On Icf Target Capsules, Bryan Chambers, Steve Letts, Michael Stadermann

STAR Program Research Presentations

We researched how the chemical and physical properties of a plasma polymer fuel capsule change as they are exposed to ambient gases. The fuel capsules contain the deuterium fuel inside them, they serve as the outer shell for the fuel and act as a ablator for the process. If they are reactive or diffusive with the atmosphere this can change their mass and effect the outcome of the fusion shots performed at the National Ignition Facility where High Powered Lasers are incident upon a gold hohlraum containing a capsule. We discovered that nitrogen and water vapor diffuse into the material …

Effect Of Au Content On Microstructural Evolution Of Snagcu Solder Joints That Undergo Isothermal Aging And Reliability Testing, Patrick J. Hyland

Master's Theses

Electronics, especially, printed circuit boards (PCBs) are a widespread technology. Metal coatings or “surface finishes” are often added to PCB board pads and component leads during manufacturing to improve their performance. Electroplated nickel/gold over copper is a popular surface finish for printed circuit boards and component leads. The presence of gold in solder joints, however, is known to have detrimental effects referred to as gold embrittlement. It is generally understood that tin-lead solder joints with less than 3 weight percent (wt%) of gold will not experience reliability issues. The acceptable level of gold in lead-free solder joints, however, is less …

The Preparation Of Functional Surfaces, Philip Thomas Dirlam

Master's Theses

Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates in reversible manner. Glass slides and capillaries were functionalized with hydrophobic dieneophiles resulting in a non-wetting surface. A retro Diels-Alder reaction facilitated by the thermal treatment of the surface’s function to cleave the hydrophobic dieneophile and resulted in the fabrication of a hydrophilic surface. Contact angle (CA) measurements were used as preliminary measurements for monitoring the changes in surface energy exhibited during the initial hydrophobic state (CA - 70±3°), after attachment of the dieneophile creating a hydrophobic state (CA - 101±9°) followed by reestablishment of the hydrophilic state …

Development And Extrapolation Of An Undergraduate Laboratory Experiment To An Elastomeric Spinal Muscular Atrophy Brace, Richard Sterling Brose

Master's Theses

Ever since the advent of polymer science, polyurethanes have played a huge role in the industrial world. They have been used in endless applications from furniture padding to aircraft coatings, to binders for insensitive munitions. It is therefore important that the chemistry of polyurethanes is well understood as well as the ability to draw relationships between the raw materials selected and the end-use properties of the polymer. Because of the multitude of practical applications, the development of an undergraduate polymer chemistry laboratory focused on polyurethane elastomers is developed and described herein. Polymer chemistry students are exposed to hydroxyterminated polybutadiene (HTPB) …