Physical Sciences and Mathematics Commons^™

Coherent Control Of Dispersive Waves, Jimmie Adriazola

Dissertations

This dissertation addresses some of the various issues which can arise when posing and solving optimization problems constrained by dispersive physics. Considered here are four technologically relevant experiments, each having their own unique challenges and physical settings including ultra-cold quantum fluids trapped by an external field, paraxial light propagation through a gradient index of refraction, light propagation in periodic photonic crystals, and surface gravity water waves over shallow and variable seabeds. In each of these settings, the physics can be modeled by dispersive wave equations, and the technological objective is to design the external trapping fields or propagation media such …

Hydrophobically Modified Isosorbide Dimethacrylates As Biomaterials For Bisphenol A Free Dental Fillings, Bilal Marie

Dissertations

Amalgam and Bisphenol A glycerolate dimethacrylate (BisGMA) are the main dental filling materials in use today. Because of the negative perception of amalgam and its lower esthetic appeal, as well as the desire to replace the endocrine disruptor Bisphenol A, which is the building block of BisGMA, there has been a critical need to search for safer alternatives to these dental filling materials.

Isosorbide is a sugar-based molecule generally recognized as safe. It has been extensively studied as a replacement to the Bisphenol A core in various materials. However, isosorbide is extremely hygroscopic, and water uptake in dental fillings causes …

Experimental And Computational Studies Of Functionalized Carbon Nanotubes For Use In Energy Storage Devices And Membranes, Emine S. Karaman

Dissertations

Electrolytes with good interfacial stability are a crucial component of any electrochemical device. The development of novel gel polymer electrolytes (GEs) with good interface stability and better manufacturability is important for the development of the next generation electrochemical devices. Gel electrolytes are hybrid electrolyte materials, combining benefits of both liquid and solid systems. Compared with liquid and solid electrolytes, GEs open new design opportunities and do not require rigorous encapsulation methods. In this dissertation, studies on functionalized carbon nanotubes (fCNTs) and graphene oxide (GO) doped polyvinyl alcohol (PVA) based gel electrolytes (GEs) are reported. The ionic conductivity and mechanical strength …

A Practical Approach To Automated Software Correctness Enhancement, Aleksandr Zakharchenko

Dissertations

To repair an incorrect program does not mean to make it correct; it only means to make it more-correct, in some sense, than it is. In the absence of a concept of relative correctness, i.e. the property of a program to be more-correct than another with respect to a specification, the discipline of program repair has resorted to various approximations of absolute (traditional) correctness, with varying degrees of success. This shortcoming is concealed by the fact that most program repair tools are tested on basic cases, whence making them absolutely correct is not clearly distinguishable from making them relatively more-correct. …

Usf Jamovi Tutorial Project: Open Education Resource, Aline Hitti, Saera Khan

USF OER Faculty Grant

Jamovi is an open source free software that USF staff, faculty and student can download to carry out any statistical analyses. The current report summarizes the progress made on an Open Education Resource Grant funded project, which aimed to created Jamovi tutorials. In this report, student feedback and faculty reaction are summarized after one semester of using the tutorials created.

Electric-Field-Driven Processes In Multiphase Fluid Systems, Qian Lei

Dissertations

Advantages of using electric fields in miniaturized apparatuses for a wide range of applications are revealed by numerous experimental and theoretical studies over the last several decades as it offers a simple and efficient method for manipulation of multiphase fluid systems. This approach is considered to be especially beneficial for control of boiling processes and colloidal suspensions considered in the presented work.

Boiling. Today's trends for enhancing boiling heat transfer in terrestrial and space applications focus on removal of bubbles to prevent formation of a vapor layer over the surface at a high overheat. In contrast, this dissertation presents a …

Energy Planning Model Design For Forecasting The Final Energy Consumption Using Artificial Neural Networks, Haidy Eissa

Theses and Dissertations

“Energy Trilemma” has recently received an increasing concern among policy makers. The trilemma conceptual framework is based on three main dimensions: environmental sustainability, energy equity, and energy security. Energy security reflects a nation’s capability to meet current and future energy demand. Rational energy planning is thus a fundamental aspect to articulate energy policies. The energy system is huge and complex, accordingly in order to guarantee the availability of energy supply, it is necessary to implement strategies on the consumption side. Energy modeling is a tool that helps policy makers and researchers understand the fluctuations in the energy system. Over the …

Role Of Technological Revolution In Transport And Communications Development, Mohamad B. Chami

BAU Journal - Science and Technology

The arousal of technology has changed a lot of aspects in human life and has drastically changed its path through a revolution that changed the whole world. This revolution took place in various aspects while affecting significantly the global economy and from those fields that considerably affect the life of human beings in the previous and current centuries are Information and Communication Technology (ICT) and transportation. It is these two factors that play a major role in the economy of countries and dominate the lives of societies in the world. Thus, this paper studies the impact of the technology revolution …

Evaluating Technology-Mediated Collaborative Workflows For Telehealth, Christopher Bondy Ph.D., Pengcheng Shi, Pamela Grover Md, Vicki Hanson, Linlin Chen, Rui Li

Articles

Goals: This paper discusses the need for a predictable method to evaluate gains and gaps of collaborative technology-mediated workflows and introduces an evaluation framework to address this need. Methods: The Collaborative Space Analysis Framework (CS-AF), introduced in this research, is a cross-disciplinary evaluation method designed to evaluate technology-mediated collaborative workflows. The 5-step CS-AF approach includes: (1) current-state workflow definition, (2) current-state (baseline) workflow assessment, (3) technology-mediated workflow development and deployment, (4) technology-mediated workflow assessment, (5) analysis, and conclusions. For this research, a comprehensive, empirical study of hypertension exam workflow for telehealth was conducted using the CS-AF approach. Results: The CS-AF …

Scale Model Equations And Optimization For Annular Flow Of Non-Newtonian Fluids Between Eccentric And Rotating Cylinders, Wei Zhang, Pooya Khodaparast, Amin Mehrabian Dr., Amir Shojaei

Progress in Scale Modeling, an International Journal

A broad range of engineering applications involves helical flow of non-Newtonian fluids between two eccentric cylinders. These applications often require estimation of the frictional pressure losses along the axes of the cylinders. Laboratory flow loops are commonly used to study the flow characteristics at smaller scales of investigation. This study uses the laws of similarity and dimensional analysis to obtain a set of scaling equations between the laboratory and prototype scales of the described annular flow. These equations are derived for four types of fluid rheology including Newtonian, power-law, Bingham-plastic, and yield power-law.

Results are expressed through a set of …

Numerical Investigation On The Effect Of Spectral Radiative Heat Transfer Within An Ablative Material, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

The spectral radiative heat flux could impact the material response. In order to evaluate it, a coupling scheme between KATS - MR and P1 approximation model of radiation transfer equation (RTE) is constructed and used. A Band model is developed that divides the spectral domain into small bands of unequal widths. Two verification studies are conducted: one by comparing the simulation computed by the Band model with pure conduction results and the other by comparing with similar models of RTE. The comparative results from the verification studies indicate that the Band model is computationally efficient and can be used to …

Photoelectrochemical Sensing Based On Zr-Mofs For Homocysteine Detection, Wen-Xia Dong, Guang-Ming Wen, Bin Liu, Zhong-Ping Li

Journal of Electrochemistry

Due to the independent form of the light source and detection system, photoelectrochemical (PEC) sensor has the advantages of low background, high sensitivity and simple operation. So far, PEC systems have been widely used in the fields including the actual detection of metal ions, biological antibodies or antigens in environmental pollutants. When the photosensitive material is irradiated by a light source with an energy being equal to or greater than its band gap, electrons (e-) transition occurs from the valence band to the conduction band, leaving a hole (h+), at the same time, the generated electron-hole pair (e-/h+) separate, and …

Formation And Morphological Evolution Of Nanoporous Anodized Iron Oxide Films, Jin-Wei Cao, Nan Gao, Zhao-Qing Gao, Chen Wang, Sheng-Yan Shang, Yun-Peng Wang, Hai-Tao Ma

Journal of Electrochemistry

The preparation of iron oxide films with nanoporous structure by anodization has attracted much attention for its potential applications. However, the formation mechanism of porous structure during anodization is still unclear. In this paper, the composition of anodic current during the formation of nanoporous anodized iron oxide film was analyzed in combination with the current density-potential response (I-V curve) and the derivation of Faraday’s law. The results showed that the anodic current consisted of an ionic current (leading to the migration of ions to form oxide) and an electronic current (leading to the oxygen evolution), and the …

Cyclic Voltammetric Simulations On Batteries With Porous Electrodes, Xue-Fan Cai, Sheng Sun

Journal of Electrochemistry

Lithium-ion batteries (LIBs) are among the most widely used energy storage devices. Whole-cell modeling and simulations of LIBs can optimize the design of batteries with lower costs and higher speeds. The Pseudo-Two-Dimensional (P2D) electrochemical model is among the most famous whole-cell models and widely applied in LIB simulations. P2D model consists of a series of kinetic equations to model Li+/Li diffusion in working/counter electrodes and electrolytes, which are filled in the porous electrodes and separator, and reactions at the interface of electrolyte and active particles. The traditional applications of P2D model, however, are limited to the cases where the current …

Effect Of Aluminum Alloy Surface Modification On Adhesion Of The Modified Polyurethane Coating And Its Corrosion Protective Performance, Xian-Yin Kuang, Shao-Qiang Jin, Yan-Hui Cao, Yan-Mei Zhang, Shi-Gang Dong, Long-Hui Zhu, Li-Wen Lin, Chang-Jian Lin

Journal of Electrochemistry

The ordinary organic coatings on aluminum alloy usually encounter a problem of low adhesion to the substrate, which results in destruction and failure of the long-term protective performance of the anticorrosion systems. The surface modification of aluminum alloy is able to enhance the adhesion of organic coating on aluminum alloys, and to improve their protective performance. In this work, a combined surface modification of anodic oxidation and mussel adhesion protein/CeO₂/3-aminopropyltriethoxysilane composite film (MCA) was developed on the aluminum alloy. The adhesion of modified polyurethane coated on the treated aluminum alloy and its corrosion protective performance were evaluated comprehensively …

Functional Sulfate Electrolytes Enable The Enhanced Cycling Stability Of Nati2(Po4)3/C Anode Material For Aqueous Sodium-Ion Batteries, Shu-Jin Li, Zhi-Kang Cao, Wen-Kai Wang, Xiao-Han Zhang, Xing-De Xiang

Journal of Electrochemistry

Aqueous sodium-ion batteries show promising application in fields of large-scale storage of intermittent renewable energies owing to the earth-abundant sodium resources and incombustible aqueous electrolytes. Primary factors determining whether they can be commercially utilized are low cost and long lifetime. Among current electrode materials, NASICON-type NaTi₂(PO₄)₃ arouses wide interests as an anode material for aqueous sodium-ion batteries as it offers a high specific capacity, fast Na-transport ability and reasonable working potential, however, suffering from insufficient cycling performance caused by severe dissolution of active materials in traditional aqueous electrolytes. In this work, a functional sulfate electrolyte …

Influence Of Heat Treatment Time On Cathode Material Cr8O21 For Lithium Battery, Jiu-Kang Teng, Qing-Jie Wang, Liang Zhang, Hong-Mei Zhang, Xiao-Tao Chen, Peng Zhang, Jin-Bao Zhao

Journal of Electrochemistry

Chromium oxide (Cr₈O₂₁) cathode material for lithium batteries was synthesized by thermal decomposition of chromium trioxide (CrO₃) at high temperature. The electrochemical properties of chromium oxide depended on the time and temperature during the heat treatment. Pure phase chromium oxide was prepared, and the effects of heat treatment time on the structures and electrochemical properties of Cr₈O₂₁ were systematically studied. The first discharge mechanism of chromium oxide in lithium batteries was explored, and the results were similar to that in lithium-sulfur batteries. The crystal phases and electrochemical properties of the prepared …

Effect Of Glycol Based Coolant Pollution On Pem Fuel Cells Stack And Recovery Measures, Cong-Yi Zhu, Xiao-Hui Li, Quan-Quan Gan

Journal of Electrochemistry

As the heat conduction medium of fuel cell cooling system, coolant is very important for the thermal management of fuel cell stack. In practical application, coolant leakage into the stack often occurs. Due to the randomness of fault location of components, the location of coolant leakage is uncertain, which may occur on the cathode side or anode side of some or all single cells. The main effects of coolant pollution on fuel cell stack are as follows: the output of open circuit voltage decreases sharply, the consistency of single cells voltage decreases and so on, which seriously affects the normal …

Nitrogen-Sulfur Co-Doped Porous Carbon Preparation And Its Application In Lithium-Sulfur Batteries, Zhao Gui-Xiang, Hafiz Zaki Ahmed Wail, Zhu Fu-Liang

Journal of Electrochemistry

In recent years, lithium-sulfur (Li-S) batteries have been considered as a promising candidate for the next generation of energy storage system due to their ultrahigh theoretical capacity (1675 mAh·g-1) and energy density (2600 Wh·kg-1). However, the practical application of Li-S batteries is seriously limited by their insulating nature of sulfur, the shuttle effect of polysulfides (LiPSs), and volume expansion during charging and discharging. To overcome those disadvantages, one of the commonly methods is to infiltrate sulfur into porous conductive carbon framework, such as porous carbon, hollow carbon spheres, graphene, carbon nanotubes and some composites of the above structures to achieve …

Structure Analysis Of Pemfc Cathode Catalyst Layer, Rui-Qing Wang, Sheng Sui

Journal of Electrochemistry

The sluggish oxygen reduction reaction (ORR) on the cathode of the proton exchange membrane fuel cell (PEMFC) has always been one of the key factors limiting its commercialization. The optimization of the cathode catalytic layer structure plays an important role in improving fuel cell performance and reducing production costs. In this paper, two different catalysts (platinum nanoparticles (Pt-NPs) and platinum nanowires (Pt-NWs)) were prepared by using catalyst coated substrate (CCS) method. By constructing a double-layer catalytic layer structure, we analyzed the effect of different catalytic layer structures by performing a single cell test. The results showed that the dense platinum …

Copper Nanoparticles In-Situ Anchored On Nitrogen-Doped Carbon For High-Efficiency Oxygen Reduction Reaction Electrocatalyst, Hui-Fang Yuan, Yue Zhang, Xing-Wu Zhai, Li-Bing Hu, Gui-Xian Ge, Gang Wang, Feng Yu, Bin Dai

Journal of Electrochemistry

Compared with noble metal platinum (Pt)-based catalysts, inexpensive non-noble metal electrocatalysts have attracted extensive attention for oxygen reduction reaction (ORR). Herein, chitosan as a kind of biomass resource rich in nitrogen and carbon was used to prepare nitrogen-doped carbon (N-C) and N-C in-situ anchored by copper nanoparticles (Cu/N-C). The as-obtained N-C and Cu/N-C nanoparticles were successfully used as non-noble eletrocatalysts tested for ORR. Compared with the N-C, the Cu/N-C showed the high surface area of 607.3 m 2·g-1 with the mean pore size of 2.5 nm and the pore volume of 0.40 cm3·g-1. The most positive Gibbs free …

Solution-Processed Flexible Broadband Zno Photodetector Modified By Ag Nanoparticles, N. P. Klochko, K. S. Klepikova, I. V. Khrypunova, V. R. Kopach, I. I. Tyukhov, S. I. Petrushenko, S. V. Dukarov, V. M. Sukhov, M. V. Kirichenko, A. L. Khrypunova

Faculty Research, Scholarly, and Creative Activity

In this work, we present flexible broadband photodetectors (PDs) fabricated by a deposition of nanostructured zinc oxide (ZnO) films on polyimide (PI) substrates by using cheap and scalable aqueous method Successive Ionic Layer Adsorption and Reaction (SILAR). In order to increase the long-wavelength absorption of the nanostructured ZnO layer, we created its intrinsic defects, including oxygen vacancies by post-treatment at 300 °C in vacuum and thus the light-sensitive material ZnO/PI was obtained. Then we applied silver nanoparticles (Ag NPs) from a silver sol onto a nanostructured ZnO film, which were visualized using SEM in the form of spheres up to …

Algorithm For Calculating The Parameters Of A Multi-Position Electromagnetic Linear Mechatronic Module, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

Currently, in the world in the field of science, engineering and technology, including in mechatronics and robotics, the creation of multi-coordinate mechatronic systems that perform power and control functions is becoming of paramount importance, this is due to a number of important positive qualities of the systems, such as simplicity and compactness of the design, the possibility of obtaining significant efforts, high accuracy and stability of the establishment of fixed positions, ease of control and high reliability. This article presents the calculation of the parameters of multi-position mechatronic modules based on linear execution elements. In the construction of this model, …

Characteristics Of The Shale Gas Reservoirs And Evaluation Of Sweet Spots In Wufeng Formation And Longmaxi Formation In Jingmen Exploration Area, Li Xiaoming, Liu Jirong, Lin Wen, Ma Lihong, Liu Dexun, Chen Yujie

Coal Geology & Exploration

In order to further clarify the resource potential of shale gas from Wufeng Formation to Longmaxi Formation in Jingmen exploration area, sweet spots were selected. The shale in Wufeng Formation and 1th Member of Longmaxi Formation of the well X was taken as the research object in this study. Using sliced kerogen, X-ray diffraction, nuclear magnetic resonance, micro nano CT scanning, geochemical analysis and other testing methods, combined with logging interpretation results, based on the petrology, organic geochemical and mineral composition, physical properties, pore types and structure characteristics and hydrocarbon content, the reservoir characteristics of Wufeng-1^th Member of the …

Interfacial Shear Behavior Of Gabion Reinforced Coal Gangue And Stability Of Embankment Slope, Yang Guolin, Chen Zi'ang, Duan Junyi, Zhang Yu, Zhang Zhen

Coal Geology & Exploration

In order to make full use of coal gangue generated in coal mining and support the carbon neutral policy, the road section K128+573–K128+740 of Anshao Highway (Anhua-shaoyang, Hunan Province)was filled by coal gangue, and the embankment slope was enhanced by gabion net. The basic characteristics of coal gangue were obtained by its chemical composition and gradation, and shear characteristics of gabion reinforced coal gangue were tested by large-scale direct shearing instrument. Finally, the influence of reinforcement and its method on the stability of reinforced coal gangue embankment was found out by finite difference method. The experimental results show that after …

Mechanism And Effect Analysis Of Enhanced Gas Drainage With Large Diameter Double Boreholes, Zhang Chunhua, Zhang Zijian, Nian Jun, Jiao Dengming

Coal Geology & Exploration

To study the mechanism of enhanced gas drainage with large diameter double boreholes, numerical models of single holes with different diameters and double ø350 mm holes were established by using the RFPA^2D-Gas software in working face 30110 of Shiquan Coal Mine, Shanxi Province. Stress distribution, damage and fracture, gas permeability evolution and gas migration law of the coal around the hole were analyzed, and then the extraction effect of double ø350 mm holes was investigated. Simulation results show that the pressure relief radii of the ø100 mm, ø250 mm, ø350 mm and double ø350 mm holes are 0.25 …

Geological Characteristics And Reservoir-Forming Potential Of Shale Gas Of Transitional Facies In Linxing Area, Eastern Margin Of Ordos Basin, Wu Peng, Cao Di, Zhu Guanghui, Liu Xueqing, Li Yong, Li Yangbing, Hu Weiqiang, Liu Zaizhen, Kong Wei, Fei Jingliang

Coal Geology & Exploration

Shale gas of transitional facies is the important replacing area for increase of shale gas reserves and production. On the basis of the experiment and research data of shale of transitional facies of Linxing area in the eastern margin of Ordos Basin, by selecting the strata series of Shanxi Formation, Taiyuan Formation and Benxi Formation as the research object, from the sedimentary environments, shale distribution, organic geochemical characteristics, mineralogy, physical characteristics and gas-bearing characteristics, etc., the geology characteristics of the shale gas transitional facies in the study area were summarized and dissected systematically to analyze its enrichment and reservoir-forming potential. …

Discussion On The Recommended Models For Resource Reuse Of Closed Coal Mines In Main Mining Areas Of Hebei Province, Yin Quanzeng, Chen Zhongshan, Feng Qiyan, Geng Lijuan, Lian Lixun, Li Fang, Liu Ning

Coal Geology & Exploration

The evaluation and the utilization of the resources of the closed coal mines have dual benefits of resources and environment, and can provide a transformation and development path for coal mining enterprises. Based on the investigation of the resources of the closed coal mines in the main mining areas of Hebei Province, through the summary of the typical cases of the resources reuse of the closed coal mines at home and abroad and in Hebei Province, this paper sums up 7 types and 19 kinds of recommended modes of the resources reuse of the closed coal mines in Hebei Province, …

Saxs-Based Nano-Scale Pore Structure Characteristics Of Coals With Different Metamorphic Degrees, Zhang Yu, Li Yong, Wang Yanbin, Wang Zhuangsen, Zhao Shihu, Han Wenlong

Coal Geology & Exploration

In order to reveal the characteristics of nano-scale pores in coals with different metamorphic degrees, the small-angle X-ray scattering method (SAXS) is used to obtain the porosity, pore size distribution, specific surface area and fractal dimension of 15 samples whose vitrinite reflectance R_max is 0.31%-6.24%, and the low temperature CO₂ and N₂ adsorption DFT model results are used to verify the pore size distribution. The results show: during coalification process, when R_max is < 0.5%, the porosity and the specific surface area of coal increase with the increase of metamorphic degree, the micropores(< 2 nm) content increases seldomly, the mesoporous(2-50 nm) and microporous(50-100 nm) content increase greatly, and the surface of coal is gradually smooth. When R_max=0.5%-1.4%, the porosity and the specific surface area decrease, and each type of pore content is reduced, and the surface of …

Experimental Study On Transient Electromagnetic Method With A Conical Source, Yang Haiyan, Liu Zhixin, Zhang Hua, Chen Xiao, Lian Zhe, Wang Ling, Yang Fujie

Coal Geology & Exploration

A new transmitter device-conical source has been proved theoretically to have several advantages for transient electromagnetic sounding. To verify application ability of conical source, two kinds of transmitter devices were designed and made, and the experimental studies on surface and in mine roadway were carried out. By applying high density resistivity achievements in surface experiment, the detecting results using conical source and multi-coils were compared. The results show that the description of strata resistivity with conical source is better than that with multi-coils. One fault was identified and the strike and position of which matches the high density resistivity result …