Physical Sciences and Mathematics Commons^™

Active Polymeric Materials For 3d Shaping And Sensing, Adebola Oyefusi

Theses and Dissertations

Part I: Reprogrammable Chemical 3D Shaping for Origami, Kirigami, and Reconfigurable Molding

Origami- and kirigami-based design principles have recently received strong interest from the scientific and engineering communities because they offer fresh approaches to engineering of structural hierarchy and adaptive functions in materials, which could lead to many promising applications. Herein, we present a reprogrammable 3D chemical shaping strategy for creating a wide variety of stable complex origami and kirigami structures autonomously. This strategy relies on a reverse patterning method that encodes prescribed 3D geometric information as a spatial pattern of the unlocked phase (dispersed phase) in the locked phase …

Selective Catalysis By Polymer-Supported Ruthenium Nanoparticlesand New Ligand Design For Cooperative And Bimetallic Catalysis, Seyed Hadi Nazari

Theses and Dissertations

The abstract is the summary of three different projects all centered around the generalidea of catalysis which is the general theme of research in the Michaelis laboratory. The firstproject focuses on development of a new heterogeneous catalyst for selective catalysis. In theMichaelis lab, we were interested in the potential of nanoparticle catalysts for regioselectivetransformations. We showed that polymer supported ruthenium nanoparticles performed as areliable catalyst for regioselective reduction of azide to amine. In our study of regioselectivereduction of multiple azide containing substrates, we observed that in presence of ourruthenium nanoparticle catalysts, the least sterically hindered azide group reduced to aminefunctional …

Properties And Applications Of Tetraalkylphosphonium Alkylsulfate Ionic Liquids And 3d Printed Polymerized Ionic Liquids, Mustafa Mohammed Alhussain

Murray State Theses and Dissertations

Ionic liquids (ILs) are defined as pure salts with a melting temperature below 100 °C with a subset called room-temperature ILs (RTILs) with melting temperatures at or below room temperature. The sizes of the cation and anion play a critical role in determining the properties, with smaller ions forming stronger ionic forces and packing better, raising viscosity and lowering conductivity of the IL. At the same time, intermolecular forces such as van der Waals and hydrogen bonding can play a role in IL properties as well. Our research described herein is focused on three tetraalkylphosphonium-based cations coupled with three alkylsulfate …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Multifunctional Microgels For Nanoparticle-Based Detection Methodologies, Alyson Silva

WWU Graduate School Collection

In this study, pH-responsive microgel particles, comprised of 2-vinyl pyridine (P2VP) and styrene (PS), are explored as scaffolds to assemble metallic nanoparticles (NPs) for ultrasensitive detection strategies. Microgel particles serve as size-tunable scaffolds to assemble metal (silver or gold) NPs for surface-enhanced Raman scattering (SERS) vibrational spectroscopy. The high sensitivity of SERS arises from the enormous enhancement of the Raman scattering cross sections of molecules adsorbed to roughened metal surfaces, such as metal NPs. Using a sterically stabilized latex of random copolymers of PS and P2VP (PSxP2VPy), this polymer is capable of transitioning to a microgel state through acid-base titration. …

Increased Utility Of Ph Sensitive Indicators As High Concentration Co2 Detectors Through The Use Of Polyelectrolyte Complexes As Stabilizing Media, Camden James Johnson

All Master's Theses

Development of plastic materials which produce visible color change when exposed to different environments has recently attracted attention for many biomedical applications.^1,2Many biomedical devices are packaged under high concentrations of carbon dioxide (CO₂) which can lower the pH of the packaging environment. This is similar to the CO₂ chemistry responsible for ocean acidification.³ Dye molecules that are sensitive to environmental changes in pH (known as pH indicators) can be encapsulated in plastics and produce a visible color change when a medical device is removed from the sterile CO₂ environment. Plastics made from large …

Plant Stimuli-Responsive Biodegradable Polymers For The Use In Timed Release Fertilizer Coatings, Spencer Heuchan

Electronic Thesis and Dissertation Repository

The use of nitrogen-based fertilizers continues to accelerate with human population growth and increases in global food requirements. Enhanced efficiency fertilizers (EEFs) have been developed to improve the synchronization between nutrient supply and crop nutrient demand. However, many of the current controlled release fertilizers are coated with non-degradable polymers that contribute to accumulation of microplastics within ecosystems. This thesis describes research towards the development of a new class of fertilizer coatings using a self-immolative polymer known as poly (ethyl glyoxylate) (PEtG). PEtG itself does not have suitable properties to produce a viable coating but once blended with another degradable polyester …

Evaluation Of Cafo Dairy Manure Treatment To Reduce Nutrient Transport, Jenna Laib

Honors Projects

Excess amounts of phosphorus and nitrogen flowing into Lake Erie from agricultural fields in Northwest Ohio has led to several harmful algal blooms (HABs). One potential source of those nutrients is manure applied to fields for fertilizer. Manure from confined animal feeding operations (CAFOs) is 95-98% water with only ~3% solids and nutrients, thus physical transportation is expensive relative to the value of the agricultural nutrients. Furthermore, once manure nutrients are applied to agricultural fields, they are relatively easily mobilized to waterways by precipitation. More than 800 lab-scale tests have been used to optimize the treatment of CAFO manure with …

Characterization Of Polymers Containing Ferrocene And Imidazole With Density Functional Theory, Eric Mullins

Electronic Theses & Dissertations

Electrochemical and UV-Vis studies on these polymers in the presence of aqueous solutions containing metal ions have revealed significant modifications in the electrochemical properties and absorption spectra. These modifications in electrochemical properties could be attributed to the ability of the imidazole to coordinate with metal ions, increasing its electron deficiency and enhancing oxidization of the nearby ferrocene moiety if it is in close proximity with imidazole. However, the mechanism of interaction between the imidazole and metal ions, as well as the equilibrium geometry of the resulting polymer-metal ion complex is unknown.

In this thesis, density functional theory (DFT) was used …

Synthesis Of Tetraethyl ((2-Amino-1,4-Phenylene)Bis(Methylene)) Bis(Phosphonate): An Intermediate In The Synthesis Of Amino-Substituted Conjugated Materials, Ariel Ivan Torres Burgueno

Theses and Dissertations

Discussed here are the syntheses of the phosphonate precursors for the Wittig-Horner synthesis of poly-phenylene vinylene (PPV) and distyrylbenzene (DSB) derivatives and their respective distyrylbenzene analogs containing amino moieties. The synthesis of the different compounds was achieved through bromination, Michaelis-Arbuzov reaction, reduction of the nitro group with a commercial cobalt sulfide catalyst and sodium borohydride. Preliminary evidence for the synthesis of amino substituted distyrylbenzene and of nitro/alkoxy substituted poly(p-phenylene vinylene) was obtained. Characterization of the products was performed by 1H-NMR. Preliminary results of the synthesis of a novel amino-substituted distyrylbenzene (DSB) are presented. The luminescence of the new DSB was …

Creating Renewable Tunable Polymers From Hydroxymethylfurfural, Meredith C. Allen

Electronic Theses and Dissertations

The research here deals with the conversion of 5-hydroxymethylfurfural (HMF) into a tunable polymer. HMF is a known derivative that can be acquired from biomass via hydrolysis of cellulose followed by isomerization and finally selective dehydration. The process considered here is being developed to create tunable polymers from HMF and involves several different steps, three of which are covered here. The first step, an etherification, is the reaction of HMF with an alcohol. This step is significant because in this step the R-group from the alcohol is added to HMF and the branching portion formed is carried over to the …

Effect Of Crosslinking On Carbon Nanotube Materials Through Chemical Treatment And Irradiation, Xinyi Lu

Doctoral Dissertations

Carbon nanotubes (CNTs) exhibit a variety of exceptional properties, especially their ultrahigh tensile strength on the order of 100GPa show promise for constituting the next-generation carbon fiber. However, challenges remain to translate these properties into useful technology, primarily due to the sliding of the tubes past one another under tensile loading. The work presented in this dissertation is focused on enhancing the interaction between the CNTs and their bundles in a macro-assembly, in order to improve the tensile properties of the material.

Applying inter-tube crosslinks has been predicted to significantly enhance the stress transfer between the CNT components. We developed …

Thermally Robust And Redox Active Catalysts: Studying Their Behavior For Ethylene And L-Lactide Polymerization, Lauren Ashley Brown

Doctoral Dissertations

The development of homogenous single-site catalysts has significantly impacted the field of organometallic chemistry. The well-defined structures of homogenous catalysts make it less cumbersome to understand and develop methods to tailor these compounds for specific catalytic processes. Currently, polymerization catalysis is a major division in organometallic chemistry due to the global demand for polymeric materials such as polyethylene (PE) and polypropylene (PP), based on their low-cost feedstock, remarkable mechanical properties, and their use in a wide range of applications. However, bioplastics have become a highly sought-after alternative to conventional petrochemical-based plastics due to their biodegradability and derivatization from renewable resources. …

Development Of High Performance Gas Separation Membranes Through Intelligent Catalyst And Monomer Design, Kevin Richard Gmernicki

Doctoral Dissertations

Polymer membranes are a valuable tool for separating components of liquid and gas mixtures. Heavily inspired by biological systems, the idea of using the intrinsic properties of polymers to perform otherwise energy-intensive tasks is attractive for applications such as water desalination, natural gas sweetening, and post-combustion carbon capture. Of particular interest to our research group, post-combustion carbon capture is a promising potential solution aimed at reducing the carbon footprint involved with production, transportation, and storage of electrical energy generation.

Every year, the United States produces close to seven billion metric tons of carbon dioxide, of which a significant portion is …

Creating Functional Materials With Phosphorus, Tyler John Cuthbert

Electronic Thesis and Dissertation Repository

Understanding the relationship between small molecules or polymers and how they affect the properties of materials they compose is the basis of materials science. Using unique and versatile components can impart useful and interesting properties to materials. Here, we aimed to extend this understanding to phosphorus, and the known properties it possesses. This included the production of photopolymerizable coatings containing phosphonium molecules and polymers for antifouling and antibacterial applications. The synthesis and characterization of these phosphonium components was completed and materials were produced utilizing UV curing technology. Addition of these components produced coatings that could resist bacteria attachment and efficiently …

The Effect Of Illumination On The Conformation And Thermodynamics Of Conjugated Polymers, Brian Frank Morgan

Doctoral Dissertations

This dissertation explores the effects which illumination has on the structure and conformation of conjugated polymers, both in solution and the bulk. Conjugated polymers are an important class of optoelectronic polymeric materials which make up the active layer of key organic electronic devices such as organic photovoltaics, transistors, and light emitting diodes. Considering the strong link between polymer chain structure and device efficiency in these materials, a comprehensive understanding of certain experimental conditions which may influence this conformation and thusly alter the functionality of the devices predicated upon them is of vital importance.

The first part of this dissertation provides …

Conversion Of Cafo Manure Into A Slow-Release Fertilizer, Richard Allan Williams Iii

Honors Projects

Alginate polymer is known to form gel through the process of Ionotropic gelation. By use of extrusion and diffusion setting manure was encapsulated into gel beads. These beads were then tested to determine their potential for further testing as a manure treatment process. From the limited data in this preliminary study, it appears as though there is potential for further testing of alginate beads as a treatment process for manure. The treatment is potentially valuable because of the ease of filtration of the alginate beads, the low cost of transportation of the dehydrated beads, and because the limited data suggests …

Synthesis Of Acceptors For Use In Donor-Acceptor Copolymers And Characterization Of These Polymers, William D. Walker

Honors Theses

In this thesis, a selenium-derivatized acceptor was synthesized to examine the heavy atom effects of selenium on the position of the frontier molecular orbitals (HOMO/LUMO band gap) as opposed to sulfur in a donor-acceptor copolymer for use in light harvesting and detection applications. Over the course of this research, standard operating protocols for ultraviolet-visible (UV-Vis-NIR) and Fourier transform infrared (FT-IR) spectroscopies, as well as cyclic voltammetry (CV) characterization techniques were established. Once synthesized, the polymers were characterized through use of the established characterization protocols. The selenium-derivatized polymer exhibited a bathochromic shift compared to the sulfur analogue, with a solid-state absorption …

Synthesis And Characterization Of Peek Analogues Utilizing 3,5- And 2,4-Difluorobenzophenone., Zachary Ewing

Browse all Theses and Dissertations

Two routes to semi-crystalline, potentially functionalizable poly(ether ether ketone), PEEK, analogues were explored using varying percentages of 4,4’-difluorobenzophenone and either 3,5-difluorobenzophenone or 2,4-difluorobenzophenone as the electrophilic component in nucleophilic aromatic substitution polycondensation reactions with hydroquinone. PEEK analogues utilizing 3,5-difluorobenzophenone were carried out in a “one-pot” fashion and their properties were compared to the same materials prepared previously by a multi-step synthetic procedure. The use of 2,4-difluorobenzophenone led to completely new PEEK analogues. The polymers were characterized via NMR spectroscopy, Size Exclusion Chromatography, Thermogravimetic Analysis, and Differential Scanning Calorimetry. Molecular weight determinations showed the synthesized polymers to be of a variety …

Synthesis And Properties Of Bisimidazolium And Poly(Ethylene Glycol)-Containing Michael Addition Polyester Networks, Joshua Allan Dippie

Murray State Theses and Dissertations

Poly(ionic liquid)s (PILs) have been examined in recent years for applications in various technologies, including solid-state lithium ion batteries and gas separation membranes. In this work, a series of bisimidazolium-containing, Michael addition donors were synthesized and used to produce a series of covalently crosslinked PIL polyester networks containing bis(trifluoromethylsulfonyl)imide as the counteranion. Within the series, the length of alkyl spacer between the two imidazolium cations and the diacrylate to acetoacetate monomer ratio were varied in an attempt to correlate structural variations with the thermal, mechanical, and conductive properties of the PILs. Keeping the diacrylate to acetoacetate ratio constant, increasing the …

Hydroxy Polybenzimidazoles For High Temperature Fuel Cells And The Solution Polymerization Of Polybenzimidazole, Kayley Fishel

Theses and Dissertations

In this dissertation, two different hompolymers of polybenzimidazole (PBI) containing hydroxyl functional units were synthesized via the PPA Process to produce gel membranes. These polymers and their phosphoric acid doped membranes were characterized to further explore structure-property relationships in functionalized PBI's. Fuel cell performance of the doped membranes was evaluated and compared to previously reported PBI membrane chemistries. Copolymers of p-OH PBI and para-PBI were prepared at five different copolymer compositions to examine the effects of hydroxy content on membrane properties and compared to the respective homopolymers. The reactivity of the hydroxy groups and the formation of phosphate bridges were …

The Effect Of Composition And Architecture On Polymer Behavior In Homopolymer Blends And Inter-Filament Bonding In 3d Printed Models, Edward Roy Duranty

Doctoral Dissertations

This dissertation presents work that increases our understanding of the effects of composition and architecture on copolymer structure and dynamics and how they affect material diffusion between filaments in a 3D printed model. Copolymers are polymer chains made up of at least two different monomers. The ordering and arrangement of the two monomer species within a copolymer can have drastic effects on the behavior and properties of the copolymer.

The first chapter of this dissertation examines how the copolymer composition affects the structure and dynamics of the chain in a homopolymer blend. This study used a modified Monte Carlo BFM …

Metal-Ligand Cooperative Catalysis And Methods For Metal Removal From Organic Transformations, John-Paul J. Bow

Electronic Thesis and Dissertation Repository

Organometallic catalysis has revolutionized the synthesis of complex organic molecules. Methods for C-C, C-X and C-H bond formation and cleavage are exploited throughout the areas of fine chemicals synthesis, with major applications for pharmaceuticals. This situation raises duel challenges: 1) high-performance catalysts for environmentally and economically sustainable synthesis and 2) efficient methods of catalyst (i.e. metal) removal must be identified. This work tackles both of these areas. The highly tunable cooperative P^R₂N^R'₂ ligands have been implemented for the first time for catalytic organic transformations. I show that [Ru(Cp)(P^tBu₂N^Bn₂)(MeCN)][PF_{6 …}

Polymer Additives Effects On Structure And Dynamics, Adam Eugene Imel

Doctoral Dissertations

This dissertation presents work that expands the understanding of the effect additives have on the structure and dynamics of a polymer matrix. Polymer additives are molecules, nanoparticles or fibers that are added to a polymer to modify the properties of the host polymer. Due to the vast amount of additives available, our studies were limited to C₆₀ (C60), soft polystyrene nanoparticles, and poly(ethylene oxide).

The first part of this project examined the influence that C₆₀ nanoparticles have on the assembly of polyacrylonitrile using small angle and wide-angle x-ray scattering techniques and viscometry. The addition of C₆₀ (C60) …

Development Of Flexible Batteries Using Nano-Carbons And Polymers, Zhiqian Wang

Dissertations

Flexible electronics such as wearable equipment, displays, cell phones and smart cards require flexible power sources like batteries. In this thesis, the development of flexible batteries and supercapacitors are presented. Different types of flexible batteries including zinc carbon batteries, primary alkaline batteries, secondary alkaline batteries and zinc air cells are presented, These were designed, fabricated and improved using polymers and nano-carbons like carbon nanotubes (CNTs). CNTs are found to be effective as conductive additives compared to the traditional graphite. Purification is important to remove impurities that lead to side reactions/ corrosions. However, further treatment like carboxylation lead to higher electric …

Polymerization Of Blocked Isocyanate Functional Polymer Surfaces And Post-Polymerization Modification By Thiol-Isocyanate Reactions, Chase A. Tretbar

Honors Theses

Direct polymerization of isocyanate-functional monomers has been achieved with controlled radical polymerizations (CRP) for precisely engineered modification platforms with highly reactive side chains. However, despite the success of these strategies, the inherent reactivity of isocyanates still leads to adverse side reactions, such as hydrolysis, that are difficult to suppress. Phenol, lactam, and oxime-based blocking agents have been used to limit the reactivity of isocyanates in applications such as multicomponent urethane coating systems. The reactivity of these blocked isocyanates can be restored by thermal deprotection of the blocking agent to achieve the desired reactions. In this work, we use blocked isocyanate-functional …

Multi-Mode And Single Mode Polymer Waveguides And Structures For Short-Haul Optical Interconnects, Kevin L. Kruse

Dissertations, Master's Theses and Master's Reports - Open

Single mode and multi-mode polymer optical waveguides are a viable solution for replacing copper interconnects as high speed and large bandwidth short-haul optical interconnects in next-generation supercomputers and data servers. A precision laser direct writing method is implemented for producing various single mode and multi-mode polymer waveguide structures and their performance is evaluated experimentally showing agreement with theoretically developed models. The laser direct writing method is the optimal solution for low-rate cost-effective prototyping and large area panel production.

A single mode polymer waveguide bridge module for silicon to glass optical fibers is designed, modeled, fabricated, and measured. The bridge module …

Biodegradable Poly(Ester Urea's) Scaffold Sponges Containing Platelet-Rich Plasma For Targeted Tendon-Bone Fixation, Alex B. Ellenberger Mr.

Williams Honors College, Honors Research Projects

In this report the synthesis and characterization of L-valine and L-isoleucine poly(ester ureas) (PEUs) for future use in the synthesis of biodegradable PEUs sponges will be discussed. The method of monomer and polymer synthesis will be explained along with the characterization of the monomer and polymer products. This characterization will be done by the use of Nuclear Magnetic Resonance (NMR) and Size Exclusion Chromatography (SEC). NMR is a quick and convenient method for determining structure and purity of the monomer and polymer products. SEC gives the number average molecular weight, which is the statistical average molecular weight of all the …

Cationic Metallocene-Containing Polymers: From Synthesis To Applications, Jiuyang Zhang

Theses and Dissertations

Metallopolymers, with the combination of metals and polymeric framworks, have attracted a lot of attention during the past decades. The development of metallopolymers has been largely driven by the desire to combine the synthetic efficiency and versatility of an organic polymer framework with the unique redox, responsive and catalytic properties of inorganic metals. Among different kinds of metallopolymers, metallocene-containing polymers， have been widely utilized for applications ranging from electrochemical sensors to templates for advanced inorganic catalysts to battery materials, due to their unique physicochemical properties. In the first part of my thesis, we showed controlled/living polymerization strategies to prepare well-defined …

Degradation Of Protective Glove Materials Exposed To Commercial Products: A Comparative Study Of Tensile Strength And Gravimetric Analyses, Todd B. Pelham

Electronic Theses, Projects, and Dissertations

ABSTRACT

Current glove guides attempt to assist in recommending which type of glove is appropriate for handling chemicals; however, they include information on less than 1% of the 89 million chemical products available today.

This study offers a solution by testing five durable polymer materials against 50 chemicals, using two rapid chemical degradation assessment techniques. The first technique involves gravimetric analysis of the weight change following constant immersion against the chemical mixture. The second method uses tensile strength to assess molecular changes in the polymer structure.

This study is focused on addressing three issues of concern. First, this study examines …