Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 31 - 47 of 47
Full-Text Articles in Physical Sciences and Mathematics
Synthesis Of 4-Iodo-3-(2-Iodoaryl) And 4-Bromo-3-(2-Bromoaryl) Sydnones And Their Reactions With Sodium Sulfite, Sodium Borohydride, And Iodine Monochloride, Kyle Jacob Liddy
Synthesis Of 4-Iodo-3-(2-Iodoaryl) And 4-Bromo-3-(2-Bromoaryl) Sydnones And Their Reactions With Sodium Sulfite, Sodium Borohydride, And Iodine Monochloride, Kyle Jacob Liddy
Browse all Theses and Dissertations
One goal of the Turnbull research group has been the synthesis of dihalogenated arylsydnones; i.e. sydnones with halogen substitution on the sydnone ring itself, as well as at the position on the aryl ring ortho to the sydnone. Further, it has been of interest to explore the reactivity of these compounds, once obtained. The present study examined the synthesis of 4-iodo-3-(2-iodoaryl)-, or "diiodo", and 4-bromo-3-(2-bromoaryl)-, or "dibromo", sydnones and the reactions of these compounds with Na2SO3 (sodium sulfite) and NaBH4 (sodium borohydride) to create a better understanding of the reactivity of diiodo and dibromo arylsydnones in general. Additionally, the reactivity …
Incorporation Of Indeno[2,1-C]Fluorenes Into Polymers Via Nucleophilic Aromatic Substitution, Nathaniel Brackett
Incorporation Of Indeno[2,1-C]Fluorenes Into Polymers Via Nucleophilic Aromatic Substitution, Nathaniel Brackett
Browse all Theses and Dissertations
A difluoro indeno[2,1-c]fluorene monomer was synthesized by a four-step process. The first compound synthesized by a two-step process was 2,5- bis(ethoxycarbonyl)-3,4-di(4-fluorophenyl)cyclopentadienone. The next two compounds synthesized were diethyl 2,3-bis(fluorophenyl)-5-hexylterephthalate and 2,3- bis(fluorophenyl)-5-hexylterephthalic acid. The final step involved an intramolecular Friedel-Crafts acylation of the terephthalic acid derivative to form 3,10-difluoro-5,8- dioxo-5,8-dihydro-6-hexylindeno[2,1-c]fluorene. The difluoro monomer was reacted in a series of nucleophilic aromatic substitution (NAS) polymerization reactions with bisphenol-A in N-methyl-pyrrolidone (NMP) in an attempt to form novel poly(ether ether ketone ketone)s containing the indeno[2,1-c]fluorene structure. Analysis of the product by NMR and TLC showed the reaction was unsuccessful and the difluoro …
Hydrothermal Atomic Force Microscopy Investigation Of Barite Growth: The Role Of Spectator Ions In Elementary Step Edge Growth Kinetics And Hillock Morphology, Sarah A. Jindra
Browse all Theses and Dissertations
To better understand the role of spectator ions in barite growth, the kinetics of step edge growth on barite (001) surfaces were studied under various salt solutions. Hydrothermal Atomic Force Microscopy (HAFM) was used to investigate the effect of background electrolytes (NaCl, NaBr and NaNO3) as a function of saturation index and ionic strength (I) on barite growth sourced at dislocations at 108 oC. Results show that hillock morphology is affected by I, as well as type of anion, where the prevalence of steps aligned on the [010] direction is highest under Cl- There is a modest increase in kinetic …
Investigating Potential Pollutant Sources Causing Lack Of Biodiversity In Lytle Creek And Indian Run, Amira Moayad Alsenbel
Investigating Potential Pollutant Sources Causing Lack Of Biodiversity In Lytle Creek And Indian Run, Amira Moayad Alsenbel
Browse all Theses and Dissertations
Limited macroinvertebrate biodiversity in Lytle Creek that runs through downtown Wilmington, Ohio has been documented over decades with the lowest in Lytle Creek at Sugar Grove Cemetery. Lytle Creek, a tributary of the Little Miami River, is a conduit for storm water and wastewater from an airport, downtown storm water with input from local businesses, and a wastewater treatment plant. This study was conducted to see if heavy metal pollution in the sediment, water quality, and Escherichia coli (E. coli) could be contributing factors in reduced macroinvertebrate populations. Eight sites were chosen for sediment sampling to measure trace metals. Mercury …
The Synthesis And Characterization Of Double And Triple Tethered Indeno[2.1-C]Fluorendiones, Daniel K. Greene
The Synthesis And Characterization Of Double And Triple Tethered Indeno[2.1-C]Fluorendiones, Daniel K. Greene
Browse all Theses and Dissertations
A series of terephthalate esters was synthesized via a Diels-Alder reaction between 2,5-dicarboethoxy-3,4-diphenylcyclopentadienone and various alkynes in order to study reaction conditions necessary to synthesize poly(indeno[2,1-c]fluorene-5,8-dione)s. Diethyl 2,3-diphenyl-5-butylterephthalate, 1,4-bis(3,4-diphenyl-2,5-di(ethoxycarbonyl) phenyl)butane and N,N,N-tris(3,4-diphenyl-2,5-di(ethoxycarbonyl)phenylmethyl)amine were synthesized and characterized by IR, 1H NMR, 13C NMR, 13C NMR DEPT135 spectroscopies as well as elemental composition. Hydrolysis conditions of the terephthalates using potassium hydroxide were also investigated. It was found that large stoichiometric equivalents of base coupled with reaction times over twenty-four hours afforded only partially hydrolyzed products. The synthesis of 6-butylindeno[2,1-c]fluoren-5,8-dione was successfully carried out by the sulfuric acid catalyzed, intramolecular, Friedel-Crafts cyclization of …
Routes To 1,3,4 - Oxadiazol-2(3h)-Ones, Karunakar Reddy Madaram
Routes To 1,3,4 - Oxadiazol-2(3h)-Ones, Karunakar Reddy Madaram
Browse all Theses and Dissertations
Various 1,3,4-oxadiazol-2(3H)-ones were synthesized by reaction of the bromocarbonylhydrazine salt(35) obtained from treatment of 4-bromo-3-phenylsydnone(34) with HCl with the corresponding acid chlorides in DME. The structures were confirmed by their physical, analytical and spectral data (IR, GC/MS, 1H and 13C NMR and CHN analysis). In general these compounds were synthesized in good to excellent yields and it is planned to continue exploration of their chemical behavior as a guide to their potential antimicrobial activity. As an initial approach to the synthesis of the desired 1,3,4-oxadiazol-2(3H)-ones, the starting material, 3-phenylsydnone, was prepared in 2 steps from commercially available N-phenylglycine in good …
Synthesis And Characterization Of Functionalized Poly(Arylene Ether Sulfone)S Using Click Chemistry, Kavitha Neithikunta
Synthesis And Characterization Of Functionalized Poly(Arylene Ether Sulfone)S Using Click Chemistry, Kavitha Neithikunta
Browse all Theses and Dissertations
Poly(arylene ether sulfone)s with pendent aryl iodide group was successfully synthesized via Nucleophilic aromatic polycondensation of 1-(3,5-difluorophenyl sulfonyl)-4-iodobenzene using 4,4’-difluorodiphenylsulfone (DFDPS) and Bisphenol A in the ratio 25:75:100. Iodo monomer was prepared by reacting 3,5-difluorodiphenyl sulfone with N-iodo succinimide (NIS). Using GC/MS and NMR spectroscopy, the quantitative analysis was done to this monomer. Modification was done to iodo copolymer using sodium azide and copper sulfate as catalyst to form azide copolymer. Further modification of the azide copolymer to triazole copolymers via Click Chemistry using different alkynes such as 1-octyne, phenyl acetylene, propargyl alcohol and acetylenedicarboxylic acid. Polymers characterization was done …
Bioavailability And Transformation Of Silver Nanoparticles In The Freshwater Environment, Seth W. Brittle
Bioavailability And Transformation Of Silver Nanoparticles In The Freshwater Environment, Seth W. Brittle
Browse all Theses and Dissertations
The proliferation of silver nanoparticles (AgNPs) in consumer products and industrial applications has generated many environmental concerns since the chemistry of silver changes at the nanoscale and the very properties that make them desirable – their unique reactivity – may pose environmental risks. This dissertation addresses these concerns from three different angles. First, freshwater crayfish is demonstrated as a potential benthic indicator of Ag pollution since Ag accumulation depends on the form of Ag. The uptake and distribution of Ag (from AgNPs or Ag+) in tissue samples were measured by inductively coupled plasma optical emission spectroscopy (ICP-OES). The hepatopancreas (1.5-17.4 …
The Enhancement Of Peroxide-Cured Fluoroelastomer Rubber To Metal Bonding, Richard Hunter Cooke Iii
The Enhancement Of Peroxide-Cured Fluoroelastomer Rubber To Metal Bonding, Richard Hunter Cooke Iii
Browse all Theses and Dissertations
A "combi-cured&" fluoroelastomer (FKM) rubber formulation was designed to yield 100% cohesive rubber failure when cured to cold-rolled steel with derivatives of polymeric silane adhesives. Three different categories of adhesives were tested: Unsaturated Polymeric Silane with Phosphonium Salt (UPSP-D), Unsaturated Polymeric Silane (UPS-L), and Saturated Polymeric Silane (SPS-L). Adhesion Inserts molded using ASTM Method D429 Method C all consistently yielded 100% cohesive rubber failure and showed adhesion strength in the range of 700 to 800 psi after being pulled at 2" per minute until break. After obtaining consistent 100% rubber failure, a design of experiment (DOE) was implemented to determine …
Libraries From Libraries Approach To The Synthesis Of Arylidene Oxindoles, Kyle James Knisley
Libraries From Libraries Approach To The Synthesis Of Arylidene Oxindoles, Kyle James Knisley
Browse all Theses and Dissertations
A libraries from libraries combinatorial chemistry approach was employed to synthesize fluorinated derivatives of both oxindoles and isatins as potential pharmaceuticals or targeting agents for imaging purposes related to cancer or Alzheimer's disease. Synthesis for these fluorinated derivatives are described by routes involving, either: a) N-alkylation of 5-substituted isatins followed by Wolff-Kishner reduction to the corresponding oxindoles and final Knoevenagel condensation with aryl aldehydes, or; b) Wolff-Kishner reduction of the isatins followed by condensation and finishing with the N-alkylation of the aldol products. In specific cases, a click reaction followed the N-alkylation of the aldol products to form the isatin …
Synthesis Of Mixed Metal Trinuclear Cluster Of Molybdenum And Tungsten And Their Electrochemistry In Ionic Liquids, Jessica Ann Davis
Synthesis Of Mixed Metal Trinuclear Cluster Of Molybdenum And Tungsten And Their Electrochemistry In Ionic Liquids, Jessica Ann Davis
Browse all Theses and Dissertations
Research is being done to find a material to improve the efficiency of the ethanol fuel cell by using a platinum free catalyst. Mo2WO2(O2CCH3)6 cluster was synthesized using Mo2(O2CCH3)4 dimer and Na2WO4. One ionic liquid, EMImBF4, was synthesized using methylimidazolim and chloroethane in the first step, and EMImCl and NaBF4 in the second step. The electrochemical properties of the ionic liquid and the metal cluster were studied. A potential window for the EMImBF4 was found to be 3.2 V. The ionic liquid has a wider potential window, and allowed for the observation of the redox properties of Mo2WO2(O2CCH3)6. The electrochemistry …
Facile Synthesis Of Functionalized Poly (Arylene Ether Sulfone)S, Mehmet Tatli
Facile Synthesis Of Functionalized Poly (Arylene Ether Sulfone)S, Mehmet Tatli
Browse all Theses and Dissertations
The synthesis of poly(arylene ether sulfone)s, with a pendant aryl iodide, was achieved via nucleophilic aromatic substitution (NAS) polycondensation of 3-iodo-3',5'-difluoro-diphenylsulfone (2) with Bisphenol-A. Monomer 2 was prepared by the reaction of 3, 5-difluorodiphenylsulfone with N-iodosuccinimide (NIS). Model reactions indicated that the iodo group was stable to NAS conditions. Both GC/MS analysis and NMR spectroscopy indicated quantitative displacement of the two fluorine atoms while the iodo group remained untouched. Furthermore, the modification of the iodo polymer was achieved via Suzuki-Miyaura cross-coupling reaction with phenyl, naphthyl, and phenylacetyl boronic acids. The thermal properties of the polymers were evaluated via DSC and …
Quantum Chemical Analysis Of The Pka's Of Alcohols And A Cellular Automata Model For The Distribution Of Gases In The Earth's Atmosphere, Edur Basha Boyinipalli
Quantum Chemical Analysis Of The Pka's Of Alcohols And A Cellular Automata Model For The Distribution Of Gases In The Earth's Atmosphere, Edur Basha Boyinipalli
Browse all Theses and Dissertations
Alcohols play important roles in many chemical and biological processes, and their acid/base behaviors are often important for these roles. In this study we ask the question, "Can the electronic properties of these compounds offer clues to the compounds' acid/base behaviors?" The study considers whether selected quantum chemical properties can be used to find correlations with the experimental pKa's of the alcohols (aliphatic and aromatic). Calculations were carried out for these alcohols using the semi-empirical RM1 method and the more advanced density functional theory (DFT) B3LYP/6-31+G* method. Significant correlations were found for several quantum chemical descriptors. It was also found …
Functionalized, Semicrystalline Poly(Ether Ketone)S Via In Situ Modification Chemistry, Raghavendhar Reddy Kotha
Functionalized, Semicrystalline Poly(Ether Ketone)S Via In Situ Modification Chemistry, Raghavendhar Reddy Kotha
Browse all Theses and Dissertations
AB3 monomer (3,4,5-Trifluoro-4'-hydroxybenzophenone) was used for polymerizations in order to mimic the combination of AB and AB2 monomers, and which has potential to facilitate concurrent polymerization and functionalization. 'Pre' and 'post' polymerization functionalization of the PEK system was done using phenol, 4-bromophenol, and 3/4-aminophenol. The solubility of the functionalized polymers was increased; and the crystallinity was decreased significantly compared to the corresponding unfunctionalized homopolymer. The polymers were characterized by 1H and 13C NMR spectroscopy, Gel Permeation Chromatography (GPC), Thermogravimetric Analysis (TGA), and Differential Scanning Calorimetry (DSC). DSC results showed that the crystallinity of the polymer was tuned by the amount …
Routes To Sydno[3,4-A]Quinoxalines, Erik Dihrkop
Routes To Sydno[3,4-A]Quinoxalines, Erik Dihrkop
Browse all Theses and Dissertations
In the present work, the reactivity of alkyl and aryl sydnoquinoxalines was studied. Using a previously developed method, triphenylphosphine-2-(3-sydnonyl)phenylimide was prepared in a two-step process via a diazotization / azidation process of 3-(2-aminophenyl)sydnone, followed by treatment with triphenylphosphine. Due to the inability to achieve previously reported yields, a new, one-step method using Mitsunobu conditions was employed to synthesize the iminophosphorane in a good yield. A similar, brominated iminophosphorane was synthesized using the same conditions in a good yield. Treatment of both the brominated and non-brominated iminophosphoranes with alkyl and aryl isocyanates or isothiocyanates in an aza-Wittig process, gave the corresponding …
Laser Initiated Chain Reactions: The Kinetics Of The Chlorine/Cyclohexane/Oxygen Chain System, Robert Alan Forlines
Laser Initiated Chain Reactions: The Kinetics Of The Chlorine/Cyclohexane/Oxygen Chain System, Robert Alan Forlines
Browse all Theses and Dissertations
The combination of laser photolysis with infrared chemiluminescence detection has proven an effective technique for determining the propagation rate coefficients of halogen + RH chain reactions. This thesis will extend the technique to cyclic alkanes by determining the propagation rate coefficients of the Cl2/ cyclohexane chain system as well as the rate coefficient for the primary chain termination mechanism, R + O2 → RO2. The following reaction scheme is supported by the kinetic analysis: Cl2 → 2Cl Laser Photolysis Cl + RH → HCl(v) + R First Propagation Step (k1) R + …
Water Solubility Characteristics Of Hydrophobically Modified Polyethyleneimines, Jennifer N. Williams
Water Solubility Characteristics Of Hydrophobically Modified Polyethyleneimines, Jennifer N. Williams
Browse all Theses and Dissertations
Commercially available polyethyleneimines varying in molecular weights and viscosities were synthetically modified in order to increase their hydrophobicity when dissolved in water. Used as additives for inkjet industry inks, these polymers have been designed to promote interaction between formulated inks and paper, while increasing the water-fastness of these water-soluble inks once they are dried on bond paper. Waterfastness, the ability of an ink to maintain print integrity once it becomes wet, as well as optical density, solubility, pH, molecular weight, polydispersity and viscosity are amongst the characteristics analyzed. The modifications of these polyethyleneimines (PEis) with alkyl bromides and alkyl epoxides …