Physical Sciences and Mathematics Commons^™

Curing Of Polymer Thermosets Via Click Reactions, Mark Richard Brei

Dissertations

In the first project, an azide functional resin and tetra propargyl aromatic diamines were fabricated for use as a composite matrix. These systems take already established epoxy/amine matrices and functionalize them with click moieties. This allows lower temperatures to be used in the production of a thermoset part. These new systems yield many better mechanical properties than their epoxy/amine derivatives, but their T_gs are low in comparison.

The second project investigates the characterization of a linear system based off of the above azide functional resin and a difunctional alkyne. Through selectively choosing catalyst the linear system can show …

Polymer Chain Dynamics In Epoxy Based Composites As Investigated By Broadband Dielectric Spectroscopy, Mohammad K. Hassan, Samuel James Tucker, Ahmed Abukmail, Jeffrey S. Wiggins, Kenneth A. Mauritz

Faculty Publications

Epoxy networks of the diglycidyl ether of bisphenol A (DGEBA) were prepared using 3,3′- and 4,4′-diaminodiphenyl sulfone isomer crosslinkers. Secondary relaxations and the glass transitions of resultant networks were probed using broadband dielectric spectroscopy (BDS). A sub-T_g γ relaxation peak for both networks shifts to higher frequencies (f) with increasing temperature in Arrhenius fashion, both processes having the same activation energy and being assigned to phenyl ring flipping in DGEBA chains. A β relaxation is assigned to local motions of dipoles that were created during crosslinking reactions. 4,4′-based networks exhibited higher T_g relative to 3,3′-based …

Molecular Scale Cure Rate Dependence Of Thermoset Matrix Polymers, Christopher Harold Childers, Mohammad K. Hassan, Kenneth A. Mauritz, Jeffrey S. Wiggins

Faculty Publications

This manuscript demonstrates the molecular scale cure rate dependence of di-functional epoxide based thermoset polymers cured with amines. A series of cure heating ramp rates were used to determine the influence of ramp rate on the glass transition temperature (Tg) and sub-Tg transitions and the average free volume hole size in these systems. The networks were comprised of 3,3′-diaminodiphenyl sulfone (33DDS) and diglycidyl ether of bisphenol F (DGEBF) and were cured at ramp rates ranging from 0.5 to 20 °C/min. Differential scanning calorimetry (DSC) and NIR spectroscopy were used to explore the cure ramp rate dependence of the polymer network …

Identification Of Arabidopsis Gpat9 (At5g60620) As An Essential Gene Involved In Triacylglycerol Biosynthesis, Jay Shockey, Anushobha Regmi, Kimberly Cotton, Neil Adhikari, John Bowse, Philip D. Bates

Faculty Publications

The first step in the biosynthesis of nearly all plant membrane phospholipids and storage triacylglycerols is catalyzed by a glycerol-3-phosphate acyltransferase (GPAT). The requirement for an endoplasmic reticulum (ER)-localized GPAT for both of these critical metabolic pathways was recognized more than 60 years ago. However, identification of the gene(s) encoding this GPAT activity has remained elusive. Here, we present the results of a series of in vivo, in vitro, and in silico experiments in Arabidopsis (Arabidopsis thaliana) designed to assign this essential function to AtGPAT9. This gene has been highly conserved throughout evolution and is …

Supporting Data For The Characterization Of Pna-Dna Four-Way Junctions, Douglas Van Iverson Ii, Crystal C. Serrano, Ann Marie Brahan, Arik Shams, Filbert Totsingan, Anthony J. Bell Jr.

Faculty Publications

Holliday or DNA four-way junctions (4WJs) are cruciform/bent structures composed of four DNA duplexes. 4WJs are key intermediates in homologous genetic recombination and double-strand break repair. To investigate 4WJs in vitro, junctions are assembled using four asymmetric DNA strands. The presence of four asymmetric strands about the junction branch point eliminates branch migration, and effectively immobilizes the resulting 4WJ. The purpose of these experiments is to show that immobile 4WJs composed of DNA and peptide nucleic acids (PNAs) can be distinguished from contaminating labile nucleic acid structures. These data compare the electrophoretic mobility of hybrid PNA–DNA junctions vs. …

Hybrid Aryl-Ether-Ketone And Hyperbranched Epoxy Networks, John Misasi

Dissertations

In this dissertation, relationships between chemical structures, cure kinetics and network architectures are correlated to bulk mechanical properties for novel, hybrid epoxy-amine networks. The work is split into two primary sections: the first is the synthesis and characterization of multifunctional glassy networks based on aryl-ether-ketone diamine curatives, while the second is based on the synthesis and characterization of hyperbranched epoxy polymers and their resulting networks.

Three aryl-ether-ketone (AEK) diamines of increasing molecular weights were synthesized and used to cure 4,4’-tetraglycidylether of diaminodiphenylmethane (TGDDM); the resulting networks were compared to 4,4’-diaminodiphenyl sulfone cured TGDDM. Architectural differences were created by varying cure …

Hydrogen Bond-Mediated Structural Order In Hydroxylated Bis-Mpa Dendritic Polymers: Experimental And Molecular Dynamics Simulation Study, Maliha N. Syed

Dissertations

Dendritic architectures are echoed throughout nature. While the significance of these pervasive patterns is not entirely clear, connections between their structures and physical properties are fascinating to contemplate. Particular interest has been paid to a family of synthetically manufactured and commercially available dendritic polymers based on 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) as a monomer. Composed of two hydroxyls and a carboxyl group, bis-MPA based structures hydrogen bond (H-bond) profusely. Given the high concentration and unique spatial orientation of end-groups, as well as the multitude of carbonyl, ester, and ether interior H-bond acceptors, a set of distinct H-bond organizations may be observed …

Asymmetric Synthesis Of Cα-Methyl-Γ- And Δ-Amino Acids From A Common Synthon And Evaluation Of Thionyl Chloride Assisted Peptide Esterifications, Emily Rose Vogel

Dissertations

C^α-methyl-γ- and δ-unnatural amino acids (UAAs) are important class of biomolecules used extensively as structural scaffolds, peptidomimetics, and in the development of pharmaceuticals. Due to steric congestion surrounding the quaternary center, asymmetric preparation of α,α-disubstituted UAAs are synthetically challenging. Herein, two methods for the synthesis of chiral synthons to prepare C^α-methyl-γ- and -δ-UAAs are reported. A crucial step in both strategies includes an enzymatic hydrolysis of prochiral malonic esters with pig liver esterase (PLE). The first method utilizes the Meyer Schuster rearrangement to prepare α,β-unsaturated diesters synthons, but the preparation of the precursor propargyl alcohol decomposes …

Development Of Dual-Cure Hybrid Polybenzoxazine Thermosets, Jananee Narayanan Sivakami

Dissertations

Polybenzoxazines are potential high performance thermoset replacements for traditional phenolic resins that can undergo an autocatalytic, thermally initiated ring - opening polymerization, and possess superior processing advantages including excellent shelf-life stability, zero volatile loss and limited volumetric shrinkage. The simplistic monomer synthesis and availability of a wide variety of inexpensive starting materials allows enormous molecular design flexibility for accessing a wide range of tailorable material properties for targeted applications. Despite the fact, once fully cured, benzoxazines are difficult to handle due to their inherent brittleness, leaving a very little scope for any modifications. The motivation of this dissertation is directed …

An Enantiodivergent Synthesis Of CΑ-Methyl Nipecotic Acid Analogues From δ-Lactam Derivatives Obtained Through A Highly Stereoselective Cyclization Strategy, Souvik Banerjee, Emily R. Vogel, Daniel Hinton, Michael Sterling, Douglas S. Masterson

Faculty Publications

A stereoselective and enantiodivergent strategy for the construction of δ-lactams is described. The strategy utilizes chiral malonic esters prepared from enantiomerically enriched mono esters of disubstituted malonic acid. A cyclization occurs with the selective displacement of a substituted benzyl alcohol as the leaving group. The resulting δ-lactams are then converted into nipecotic acid analogues using straightforward transformations. The resulting nipecotic acid analogues proved capable organocatalysts in Mannich reactions.

Structural Characterization Of A Newly Identified Component Of Α-Carboxysomes: The Aaa+ Domain Protein Csocbbq, Markus Sutter, Evan W. Roberts, Raul C. Gonzalez, Cassandra Bates, Salma Dawoud, Kimberly Landry, Gordon C. Cannon, Sabine Heinhorst, Cheryl A. Kerfeld

Faculty Publications

Carboxysomes are bacterial microcompartments that enhance carbon fixation by concentrating ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) and its substrate CO₂ within a proteinaceous shell. They are found in all cyanobacteria, some purple photoautotrophs and many chemoautotrophic bacteria. Carboxysomes consist of a protein shell that encapsulates several hundred molecules of RuBisCO and contain carbonic anhydrase and other accessory proteins. Genes coding for carboxysome shell components and the encapsulated proteins are typically found together in an operon. The α-carboxysome operon is embedded in a cluster of additional, conserved genes that are presumably related to its function. In many chemoautotrophs, products of the expanded carboxysome …

Preparation And Preliminary Dielectric Characterization Of Structured C60-Thiol-Ene Polymer Nanocomposites Assembled Using The Thiol-Ene Click Reaction, Hanaa Mohammed Ahmed, Amber Danielle Windham, Maryam M. Al-Ejji, Noora H. Al-Qahtani, Mohammad K. Hassan, Kenneth A. Mauritz, Randy K. Buchanan, J. Paige Buchanan

Faculty Publications

Fullerene-containing materials have the ability to store and release electrical energy. Therefore, fullerenes may ultimately find use in high-voltage equipment devices or as super capacitors for high electric energy storage due to this ease of manipulating their excellent dielectric properties and their high volume resistivity. A series of structured fullerene (C₆₀) polymer nanocomposites were assembled using the thiol-ene click reaction, between alkyl thiols and allyl functionalized C₆₀ derivatives. The resulting high-density C₆₀-urethane-thiol-ene (C₆₀-Thiol-Ene) networks possessed excellent mechanical properties. These novel networks were characterized using standard techniques, including infrared spectroscopy (FTIR), differential scanning calorimetry …

Morphology-Property Relationship For Binary Organic Thin Films, Alyssa Lynn Griffin

Master's Theses

Organic thin films can be readily mass-produced through solution-based fabrication methods including ink-printing and solution-casting because their light weight, flexibility, and inexpensive sources. Their applications range from organic field-effect transistors (OFET), organic solar cells (OSC), to organic light emitting diodes (OLEDs). Compared with pure component films, binary organic thin films (BOTF) allows for novel characteristics and specialized features to handle more demanding tasks. Due to the complex intermolecular interactions in BOTF, various microscopic phases with different morphological and electronic properties may be formed and this information is difficult to extract through conventional bulk measurements.

Organic thin films can be readily …

Advances In Understanding Carboxysome Assembly In Prochlorococcus And Synechococcus Implicate Csos2 As A Critical Component, Fei Cai, Zhicheng Dou, Susan L. Bernstein, Ryan Leverenz, Eric B. Williams, Sabine Heinhorst, Jessup M. Shively, Gordon C. Cannon, Cheryl A. Kerfeld

Faculty Publications

The marine Synechococcus and Prochlorococcus are the numerically dominant cyanobacteria in the ocean and important in global carbon fixation. They have evolved a CO₂-concentrating-mechanism, of which the central component is the carboxysome, a self-assembling proteinaceous organelle. Two types of carboxysome, α and β, encapsulating form IA and form IB d-ribulose-1,5-bisphosphate carboxylase/oxygenase, respectively, differ in gene organization and associated proteins. In contrast to the β-carboxysome, the assembly process of the α-carboxysome is enigmatic. Moreover, an absolutely conserved α-carboxysome protein, CsoS2, is of unknown function and has proven recalcitrant to crystallization. Here, we present studies on the CsoS2 protein in …

Efficient Esterification Of Oxidized L-Glutathione And Other Small Peptides, Emily Rose Vogel, William Jackson, Douglas S. Masterson Dr.

Faculty Publications

xidized l-glutathione was esterified to the tetra methyl ester using thionyl chloride in methanol solvent. Other alcohols were tested and the reaction progress was monitored via ESI-MS. This procedure proved to be compatible with other small peptides not containing serine and cysteine residues. In contrast to previously reported methods this procedure provided convenient access to esterified peptides requiring no purification, extended reaction times, or complicated reaction setups.

Polymerization Of Blocked Isocyanate Functional Polymer Surfaces And Post-Polymerization Modification By Thiol-Isocyanate Reactions, Chase A. Tretbar

Honors Theses

Direct polymerization of isocyanate-functional monomers has been achieved with controlled radical polymerizations (CRP) for precisely engineered modification platforms with highly reactive side chains. However, despite the success of these strategies, the inherent reactivity of isocyanates still leads to adverse side reactions, such as hydrolysis, that are difficult to suppress. Phenol, lactam, and oxime-based blocking agents have been used to limit the reactivity of isocyanates in applications such as multicomponent urethane coating systems. The reactivity of these blocked isocyanates can be restored by thermal deprotection of the blocking agent to achieve the desired reactions. In this work, we use blocked isocyanate-functional …

Analysis Of The Mechanical Properties Of Dgebf/4,4’-Dds Thermoset Systems As A Function Of Cure Rate, Chase B. Thompson

Honors Theses

The relationship between macroscopic mechanical and thermal properties and ramp rate during cure of epoxy-amine systems consisting of the epoxide resin digylcidyl ether of bisphenol F (DGEBF, provided Hexion specialty chemicals) and 4,4-diaminodiphenyl sulfone (4,4-DDS, provided by Atul Sulpho) were probed using Dynamic Mechanical Analysis (DMA), Positron Annihilation Lifetime Spectroscopy (PALS), and compression testing. These systems were cured in a programmable oven; the samples were heated from 35°C to 180°C at ramp rates of 0.5, 1.0, 1.5, 2.0, 2.5, 5.0, 10, and 15°C/min. Even as the ramp rates during the cure of these materials was changed, there was very little …

Biomimetic Adhesive Thiol-Ene Films For Improved Adhesion, Laken L. Kendrick

Honors Theses

Current dental restoration materials fall short in adhesion and often pull away from the surface of the tooth upon curing. This project seeks to design polymers that can adhere to wet, heterogeneous surfaces as potential materials for dental restoration applications. The goal of this project is to mimic the structure and adhesive properties of natural adhesives containing 3,4-dihydroxyphenyl-L-alanine (DOPA). We will synthesize mono- and di-functional DOPA derivatives with catechol functionality and investigate their adhesion compared to their non-catechol-containing alternative through incorporation into a model thiol-ene photopolymerization. Functional group conversion, real time kinetics, and adhesion data will be used to analyze …

Mechanochemical Investigation Of A Glassy Epoxy-Amine Thermoset Subjected To Fatigue, Stephen Finley Foster

Dissertations

Covalent bonds in organic molecules can be produced, altered, and broken through various sources of energy and processes. These include photochemical, thermochemical, chemical, and mechanochemical processes. Polymeric materials derive their physical properties from the time scale of motion, summation of intermolecular forces, and number of chain entanglements and crosslinks. Glassy thermoset polymers experience mechanical fatigue during dynamic stress loading and properties diminish with inevitable material failure at stress levels below the ultimate tensile strength (UTS). Damage modeling has been successful in predicting the number of cycles required to induce failure in a specimen due to stress. However, it does not …

Investigations Of The Photocatalytic Activity And Self-Cleaning Properties Of Polyhedral Oligomeric Silsesquioxane (Poss) Containing Titania Thiol-Ene Films, Lacrissia Unsonta Jefferson

Dissertations

In this document the film composition, self-cleaning aspect, photocatalytic efficiency, and methods employed to analyze a novel photocatalytic titania-containing thin film was evaluated. A primary objective of this research project was to assess the conditions required to achieve a stable titania dispersion for the photocatalytic coating and to determine the extent to which the presence of additives contributes to this process. Modified titania dispersions were prepared and characterized via dynamic light scattering (DLS), transmission electron microscopy (TEM), fourier transmission infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Characterization details of the previous focus on the influence of polyhedral oligomeric silsesquioxane (POSS) …

Aqueous Raft Polymerization Of Glycopolymers For Peptide Interaction Studies And Antimicrobial Peptide Mimics For Antimicrobial Activity And Selectivity Studies, Sarah Elizabeth Exley

Dissertations

The first section of this work describes the synthesis and characterization of novel glycopolymers synthesized to model GM1 gangliosides, a glycolipid found in neuronal cells. Glucose and galactose were attached to N-hydroxyethyl acrylamide, using chemistry that granted control over the stereochemistry at the C1’ carbon of each saccharide, and polymerized via aqueous RAFT (aRAFT). Homopolymers, targeting either 30 or 300 DP, and copolymers, with N-dimethyl acrylamide, were prepared as a glycopolymer platform for investigation of amyloid β (Aβ), a naturally occurring peptide associated with Alzheimer’s disease, aggregation. Aβ aggregation kinetics and aggregate size in the presence of glycopolymer were determined. …

A Simple Method For Tuning The Glass Transition Process In Inorganic Phosphate Glasses, René Fulchiron, Imane Belyamani, Joshua U. Otaigbe, Véronique Bounor-Legaré

Faculty Publications

The physical modification of glass transition temperature (T_g) and properties of materials via blending is a common practice in industry and academia and has a large economic advantage. In this context, simple production of hitherto unattainable new inorganic glass blends from already existing glass compositions via blending raises much hope with the potential to provide new glasses with new and improved properties, that cannot be achieved with classical glass synthesis, for a plethora of applications such as computers screens, glass-to-metal seals, and storage materials for nuclear wastes. Here, we demonstrate that blends of the specific glass compositions …

A Novel Method For Confirming The Presence Of Volatile Reduced Sulfide Compounds Via Inductively Coupled Plasma-Optical Emission Spectroscopy, Krystal Lynne Parker

Master's Theses

Millions of dollars in destruction in the past decade have resulted from the use of Chinese drywall in homes. There are also potential health hazards related to this corrosive material. As such, it is important to find a way to identify Chinese drywall. Drywall can be tested for certain markers, such as strontium, sulfur, and carbonates to identify it as corrosive Chinese drywall. The laboratory preparation and analysis should be efficient and cost effective. The methods previously used, such as an X-ray fluorescence gun have had issues with getting a proper reading due to the layers of other materials found …

Computational And Experimental Investigation Into Yield Behavior And Cure Rate Dependence Of Thermoset Polymers, Christopher Harold Childers

Dissertations

This dissertation is broken down into two primary sections: firstly, the development and improvement of molecular dynamics simulations of thermoset matrix polymers including their use in understanding molecular response to applied strain deformation and secondly, the discernment of a cure heating ramp rate dependence of the final molecular and macro-molecular properties of thermoset matrix polymer.

The molecular dynamics section will discuss the development of molecular dynamics simulations of thermoset epoxy/amine matrix polymers, and the implementation of this work to determine the underlying molecular level events that cause thermoset matrix polymer yield. It will report a novel method for the determination …

Spectroscopy And Gas-Phase Binding Of Modified Desferrioxamine B Indicator Displacement-Based Sensors, William Scott Jones

Dissertations

A coupling reaction has been used to successfully synthesize two novel probes utilizing coumarin derivatives as fluorophores. The structure, spectroscopy, and thermodynamics of these probes were characterized and studied. These probes, along with a classical probe using a N-methyl-anthranilate fluorophore, are used to take advantage of the ability of siderophores to coordinate Fe³⁺ ions which is coupled with the attractive phosphorescence properties of lanthanide ions. The use of lanthanide metals to create an indicator displacement assays is a novel application of these probes for the detection of Fe³⁺ ions. The use of Tb³⁺ ions as the indicator …

Continuous Polymer Reactor Design, David Sujay Kingsley

Dissertations

Twin screw extruders can be used as continuous polymer reactors to process polymers, which are conventionally made through batch reactors. Batch processes have certain undesirable qualities such as improper mixing and the inability to precisely control the reaction, which leads to variation between batches and potential exotherms. The work presented in this dissertation investigates the use of continuous polymer reactor designs to efficiently process renewable sourced thermoplastic polyurethanes (TPU), and prepreg epoxy matrix prepolymers.

The overall goal of this research is to highlight the modularity of twin screw extruders as continuous polymer reactors to synthesize the relevant polymers. Chapter I …

Investigation Of Glassy State Molecular Motions In Thermoset Polymers, Jianwei Tu

Dissertations

This dissertation presents the investigation of the glassy state molecular motions in isomeric thermoset epoxies by means of solid-state deuterium (²H) NMR spectroscopy technique. The network structure of crosslinked epoxies was altered through monomer isomerism; specifically, diglycidyl ether of bisphenol A (DGEBA) was cured with isomeric amine curatives, i.e., the meta-substituted diaminodiphenylsulfone (33DDS) and para-substituted diaminodiphenylsulfone (44DDS). The use of structural isomerism provided a path way for altering macroscopic material properties while maintaining identical chemical composition within the crosslinked networks.

The effects of structural isomerism on the glassy state molecular motions were studied using solid-state ²H …

Molecular Probes For The Detection Of Zn2+ And Fe3+ Ions, Erendra Manandhar

Dissertations

A number of molecular probes have been designed and synthesized for the detection of Zn²⁺ and Fe³⁺ ions. Two types of functional groups have been incorporated into the molecular scaffolds to utilize different fluorescent mechanisms. The first class of receptors contains a pyrene moiety. These molecular probes use the excimer mechanism for the detection of Zn²⁺ ion. The probes work well in an organic solvent with a detection limit of 20 nM (one ppb). Alternatives are made to make them water soluble, but this proved to be difficult. An interesting ion-induced self-assembly system will also be discussed. …

Utilization Of Aqueous Raft Prepared Copolymers To Improve Anticancer Drug Efficacy, Andrew Christopher Holley

Dissertations

The advent of controlled radical polymerization (CRP) techniques, along with advancements in facile conjugation chemistry, now allow synthetic tailoring of precise, polymeric architectures necessary for drug/gene delivery. Reversible addition- fragmentation chain transfer (RAFT) polymerization and its aqueous counterpart (aRAFT) afford quantitative control over key synthetic parameters including block length, microstructure, and placement of structo-pendent and structo-terminal functionality for conjugation of active agents and targeting moieties. The relevance of water-soluble and amphiphilic (co)polymers synthesized by RAFT for in vitro delivery of therapeutics in biological fluids is an especially attractive feature. In many cases, polymerization, binding, conjugation, …

Enzyme, Cosolvent, And Substrate Interactions In Ple Hydrolysis Reactions And Evaluation Of The Stability Of An Unnatural Glutathione Analogue, Maureen Elizabeth Smith

Dissertations

Prochiral diester malonates have been hydrolyzed in the presence of Pig Liver Esterase (PLE). Several of the diesters produced the respective half-ester in moderate to high enantioselectivity. A series of cosolvent assays were performed to evaluate the ability of the cosolvent to influence the enantioselective outcome of the hydrolysis reactions. Ethanol produced the largest changes in enantioselectivity of all solvents evaluated. The isoenzymes of PLE were also evaluated and provided very different enantioselective outcomes than that of crude PLE. A series of NMR titrations was performed to explore the interactions between the substrates and ethanol cosolvents.

Improvements to our previously …