Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemistry

Chinese Chemical Society | Xiamen University

Journal

2003

Articles 31 - 60 of 73

Full-Text Articles in Physical Sciences and Mathematics

Influence Of Marine Organisms Upon Corrosion Of Steel Piling Systems, Jiunn-Shyong Luo, Cliff Cliff, Rau Rau, Kuei-Ching Chen Aug 2003

Influence Of Marine Organisms Upon Corrosion Of Steel Piling Systems, Jiunn-Shyong Luo, Cliff Cliff, Rau Rau, Kuei-Ching Chen

Journal of Electrochemistry

To study the influence of marine organisms upon corrosion of ASTM A36 steel piling sysems,specimens were immersed in both natural and synthetic seawater.Electrochemical techniques such as linear polarization resistance and electrochemical impedance scan(EIS) were applied to evaluate corrosion of the steel.The results indicated that attachment of marine organisms to form fouling layers on the steel surface reduced general corrosion,but localized corrosion occurred underneath marine organisms.An equivalent circuit model was established to simulate attachment of marine organisms upon carbon carbon steel surfaces.

Go to article

Severe Corrosivity And Its Eletrochemical Mechanism Of Seawater In Xiamen Sea Area To Al-Mg Alloys, Le-Yun Lin, Yue-Hong Zhao Aug 2003

Severe Corrosivity And Its Eletrochemical Mechanism Of Seawater In Xiamen Sea Area To Al-Mg Alloys, Le-Yun Lin, Yue-Hong Zhao

Journal of Electrochemistry

The surface layer seawater of different sea areas in China exhibit different corrosivity to Al_Mg alloys according to the experiment results of 16 years exposure in seawater.The seawater in Xiamen sea area possesses severe corrosivity while seawater in Qingdao possesses the mildest corrosivity to Al_Mg alloys with better regularity of corrosion behavior.The present paper illustrates by experiment data that the strongest corrosivity of Xiamen seawater to Al_Mg alloys is owing to the low salinity of the seawater and the “electrolyte effect” come from it.The 16 year corrosion data and corrosion morphology of the typical Al_Mg alloys from full_immersion zone,tide zone …

Go to article

The Technique Of Rare-Earth Conversion Coatings On Aluminum Alloy, Jun-Tao Wang, Jian-Hua Wu, Guang-Zhang Chen Aug 2003

The Technique Of Rare-Earth Conversion Coatings On Aluminum Alloy, Jun-Tao Wang, Jian-Hua Wu, Guang-Zhang Chen

Journal of Electrochemistry

The orthogonal design was used to screen the film_forming technique on LY12 aluminum alloy using quadrivalent cerium salt, and the corrosion_resistance performance of the coating was studied. The results revealed that: after LY12 aluminum alloy was treated by cerium salt, its pitting potential shifts to positive direction while the corrosion potential slightly decreases, showing that the alloy becomes less sensitive to pitting corrosion was greatly improved, comparable to that after chromate treatment; in addition, by combining the results of electrochemical measurements with surface analysis, the mechanism of corrosion_resistance on the race_earth conversion coating of the aluminum alloy was also discussed.

Go to article

Study On The Electrochemical Behavior Of Methy1 Green And Methy1 Green-Cyclodextrin Supramolecule System, Yu-Jing Guo, Jing-Hao Pan, Chun-Hua Guo, Hong-Lian Zheng Aug 2003

Study On The Electrochemical Behavior Of Methy1 Green And Methy1 Green-Cyclodextrin Supramolecule System, Yu-Jing Guo, Jing-Hao Pan, Chun-Hua Guo, Hong-Lian Zheng

Journal of Electrochemistry

Electrochemical behavior of methyl green in different kinds of solution and the supramolecule system of methyl green_cyclodextrin were studied.Inclusion constants of four cyclodextrin with emthyl green were determined by “electric current method”.The order of inclusion ability is HP_β_CD,β_CD,SBE_β_CD and CM_β_CD.The molar ratio of inclusion complexes of methyl green with CDs is 1:2. A possible mechanism was reported for methyl green.

Go to article

Study Of Electrolyzed Pure Iron And Rrr_H Method, Wei_Min Cao, Ren-He Yin, Hui-Gen Yan, Yi-Bing Zhang, Ying-Chun Dai Aug 2003

Study Of Electrolyzed Pure Iron And Rrr_H Method, Wei_Min Cao, Ren-He Yin, Hui-Gen Yan, Yi-Bing Zhang, Ying-Chun Dai

Journal of Electrochemistry

The high purity electrolytic iron was made from scrap iron chips. The purity of electrolyzed pure iron was above 99.98% by chemical analysis. The resistivity was measured at 298 K and at 4.2 K under an applied longitudinal_magnetic field of 800 0 e. The ratio of resistivity at 298 K to that at 4.2 K, The value of residual resistivity ratio (RRR H) roughly depended on the purity of iron. Pure iron electrolyzed on Ti substrate had very compact texture as evident by SEM.

Go to article

Initial Stages Of Pd Deposition Onto Au(111) Electrodes From Pdso_4 Solution, Jing Tang, Petri M., Kibler L.A., Kolb D.M. May 2003

Initial Stages Of Pd Deposition Onto Au(111) Electrodes From Pdso_4 Solution, Jing Tang, Petri M., Kibler L.A., Kolb D.M.

Journal of Electrochemistry

Metal thin films have attracted considerable interest in relation to catalysis, energy, material, corrosion and environmental protection. Pd thin film is capable of proton reduction and strong hydrogen absorption, which has shown electrocatalytic activity to the oxidation of small organic molecules. In this paper, in_situ STM measurements are performed to study the deposition process and the influence of the surface structure and anion adsorption. When Pd is deposited from PdSO4 solution on Au(111) in the UPD range, a monolayer of Pd with pseudomorphic (1×1) structure was formed on the substrate with induced (3×7) R19° SO2-4 adsorption. With decreasing potential the …

Go to article

Microstructure And Electrochemical Characteristics Of The Anodic Film Formed On Aluminum Surface, Jeng-Kuei Chang, Chi-Min Liao, Chih-Hsiung Chen, Wen-Ta Tsai May 2003

Microstructure And Electrochemical Characteristics Of The Anodic Film Formed On Aluminum Surface, Jeng-Kuei Chang, Chi-Min Liao, Chih-Hsiung Chen, Wen-Ta Tsai

Journal of Electrochemistry

The thickness, morphology, chemical composition, and crystallinity of the anodized film formed on aluminum were examined in a transmission electron microscope (TEM). Thin foil for TEM analysis was prepared by ultramicrotomy. The relationship between the microstructure and the electrochemical characteristics of the alumina film forming on the pure aluminum was discussed in this investigation. At the forming voltage less than 100V, the anodized films formed at 85 ℃in aqueous ammonium adipate electrolyte was amorphous in nature. Although the film resistance was increased with the forming voltage, its dielectric constant was not changed significantly. As the forming voltage exceeded 100V, crystalline …

Go to article

Metastable Pitting Of Aluminum Anodic Film In Neutral Sodium Chloride Solution, Jing-Mao Zhao, Zhi-Jun Bai, Yu Zuo May 2003

Metastable Pitting Of Aluminum Anodic Film In Neutral Sodium Chloride Solution, Jing-Mao Zhao, Zhi-Jun Bai, Yu Zuo

Journal of Electrochemistry

Potentiodynamic polarization,electrochemical noise and SEM were used to study the corrosion behavior of L2 aluminum anodic film in 1 mol/L NaCl solutions.The results showed that anodic oxidization of aluminum increases its corrosion resistance greatly.However metastable pits were also observed when the film was thin or was exposed to the solutions for a long time.These pits with a diameter less than 10μm often occurred around the metallic inclusions in film.

Go to article

Corrosion Behavior Of Reinforcing Steel In Concrete Subjected To Chloride Contamination By Eis, Rong-Gang Hu, Rong-Gui Du, Chang-Jian Lin May 2003

Corrosion Behavior Of Reinforcing Steel In Concrete Subjected To Chloride Contamination By Eis, Rong-Gang Hu, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS) was employed to study the influence of chloride on the corrosion behavior of reinforcing steel in concrete.In Nyquist plot,the spectrum consists of two semicircles,indicating that the reinforced concrete system contained two time constants,one derived from electrical double layer of reinforcing steel and the other from the deposition film of concrete layer.The depressed semicircle in lower frequency featured the non_faradic behavior of the electrical double layer (EDL) deviated from idea capacitor due to diffusive effect which was attributed to the surface roughness of rebar and the inhomogenity of concrete layer.Then the EDL was denoted by a constant phase …

Go to article

Corrosion Prediction Of Carbon Steel In Concentrated Lithium Bromide Solutions At High Temperature Using Bp Neural Network, Nai-Bao Huang, Cheng-Hao Liang May 2003

Corrosion Prediction Of Carbon Steel In Concentrated Lithium Bromide Solutions At High Temperature Using Bp Neural Network, Nai-Bao Huang, Cheng-Hao Liang

Journal of Electrochemistry

Neutral network model has been developed for the computation of corrosion rate of carbon steel in LiBr solutions.The results indicate that the model is capable of reproducing the effects of changes in alkalinity,temperatures,LiBr and Na2MoO4 concentrations on the rates of general corrsion and good agreement between calculated and experimental corrosion rate is obtained.The model can be used to satisfactorily predict the corrosion rate of carbon steel in different concentrations of LiBr solutions containing different inhibitors at different temperatures.It also provides a novel method for corrosion monitoring of metals used in LiBr absorption chiller.

Go to article

The Electrochemical Behaviors Of A Novel Ferrocene Alkylthiol Sams On Au Electrode, Xiao-Gang Zhang, Yan-Li Shi, Hu-Lin Li May 2003

The Electrochemical Behaviors Of A Novel Ferrocene Alkylthiol Sams On Au Electrode, Xiao-Gang Zhang, Yan-Li Shi, Hu-Lin Li

Journal of Electrochemistry

A novel alkylthiol molecule containing ferrocene and pyridium moieties and its hydrogenated products were synthesized and subsequently assembled on Au electrode as SAMs. Cyclic voltammogram(CV) was used to investigate the structure_dependent electrochemical response of the SAMs in 0.1 mol/L HClO4 aqueous solution.

Go to article

Oxidation Behavior Of Zr-Cu-Al-Ni Amorphous Alloys In Air At 300～500 ℃, H. Hsieh H., Kai W., G. Neih T., Kawamura Y. May 2003

Oxidation Behavior Of Zr-Cu-Al-Ni Amorphous Alloys In Air At 300～500 ℃, H. Hsieh H., Kai W., G. Neih T., Kawamura Y.

Journal of Electrochemistry

The oxidation behavior of the Zr_based bulk amorphous alloy (BMG; Zr_30Cu_10Al_5Ni in at.%) was studied in dry air over the temperature range 300～500 ℃. The kinetic results indicated that the amorphous alloy oxidized linearly at 300 ℃,while the parabolic oxidation was observed at 350～425 ℃, and the oxidation behavior at 500 ℃ was irregular and complicated. In general, the scales formed on the surface of the amorphous alloy were temperature_dependent, consisting of tetragonal_ZrO2 at 300　℃, and of mostly tetragonal_ZrO2 as well as minor amounts of monoclinic_ZrO2 and CuO at T≥350　℃.

Go to article

Selective Corrosion In Duplex Stainless Steel, Wen-Ta Tsai, Kuen-Ming Tsai, Chang-Jian Lin, Yan Fu May 2003

Selective Corrosion In Duplex Stainless Steel, Wen-Ta Tsai, Kuen-Ming Tsai, Chang-Jian Lin, Yan Fu

Journal of Electrochemistry

In duplex stainless steel, the two constituent phases, namely ferritic (α)and austenitic(γ) phases, have different crystal structure and chemical composition. They may thus exhibit different corrosion resistances in aqueous environment. In this investigation, an electrochemical technique with spatial resolution was employed to measure the potential difference between these two constituent phases in 2205 duplex stainless steel. Image analyzing techniques were also used to examine the preferential corrosion between α and γ phases. The experimental results showed that ferrite had a higher potential than austenite in0.01 mol/L NaCl solution. In 2 mol/L H2SO4+x mol/L HCl solution, two distinct peaks appeared in …

Go to article

Study Of Marine Biocorrosion Using Afm And Molecular Techniques, Herbert H.P.Fang, Lichong Xu, Tong Zhang May 2003

Study Of Marine Biocorrosion Using Afm And Molecular Techniques, Herbert H.P.Fang, Lichong Xu, Tong Zhang

Journal of Electrochemistry

Biofilm is ubiquitous in nature.However,corrosin caused by biofilm is still by and large overlooked.This presentation is to demonstrate the applications of several newly developed analytical techniques in chemisrty and microbiology for the study of marine biocorrosion on steel.AFM(atomic force microscopy) was applied to investigate the initial formation mechanism of biofilm and the degree of corrosion of steel in polluted seawater.DNA/RNA_related molecular techniques were used to analyze the microbial composition corrosive biofilm. Results showed that microbial corrosion began within six days, and the corroded volume in the increased as a power function of time with an index 2.83. Most of the …

Go to article

Recent Progress In The Research On Electrodeposition Of Composite Coatings, Xiao-Bing Liu, Xu-Cheng Wang, Yu Chen, Dan-Hong Cheng, Zu-Zhan Yu May 2003

Recent Progress In The Research On Electrodeposition Of Composite Coatings, Xiao-Bing Liu, Xu-Cheng Wang, Yu Chen, Dan-Hong Cheng, Zu-Zhan Yu

Journal of Electrochemistry

Recent progress in the research on composite coatings prepared by electroplating technology is reviewed. The nanoscaled particles, electrocatalytic, photoactive composite coatings are emphatically discussed. The composite coatings prepared by dispersing nanoscaled particles could attain better hardness, wear resistance and corrosion resistance than those of composite coatings which prepared by adding micronscaled particles. As compared with pure metal electrode and alloy electrode, some electrocatalytic composite coatings electrode could markedly reduce the overvoltages of cathodic and anodic electrode reaction. In recent years, the electrocatalytic composite coatings which based on metal oxides and conductive polymer as matrix materials become a newest field of …

Go to article

Preparation And Electrochemical Preformance Of Zn-La Alloys, Xian-Ling Meng, Hua-Bin Yang, En-Dong Yang, Xiao-Dan Wang, Hai-Chang Zhang, Jun-Hong Wang, Zuo-Xiang Zhou May 2003

Preparation And Electrochemical Preformance Of Zn-La Alloys, Xian-Ling Meng, Hua-Bin Yang, En-Dong Yang, Xiao-Dan Wang, Hai-Chang Zhang, Jun-Hong Wang, Zuo-Xiang Zhou

Journal of Electrochemistry

Zn_La alloys were prepared by solid phase diffusion method and the effects of La on the electrochemical performance of zinc electrodes were investigated using potentiostatic polarization technique and charging/discharging cycle test. The results showed that adding La to zinc electrode remarkably suppressed the zinc dendrite, the shape of zinc electrode and zinc corrosion, and hence, markedly improved the cycle performance of zinc electrodes. The discharging capacity of the zinc electrode containing 0.5at.% La which was the optimum was still 520 mAh/g after it cycled 80s at the current of 100 mA. The XPS showed that La element mainly adhered on …

Go to article

Cavitation Erosion Behavior Of Ni-Al Intermetallic Coatings, Chang J.T., H. Yeh C., He J.L., Chen K.C. May 2003

Cavitation Erosion Behavior Of Ni-Al Intermetallic Coatings, Chang J.T., H. Yeh C., He J.L., Chen K.C.

Journal of Electrochemistry

A cathodic arc plasma ion plating process was demonstrated to deposit Ni_Al film on AISI 1045 carbon steel to evaluate the cavitation protection. Three target materials with Ni52Al48, Ni60Al40, and Ni70Al30 compositions were used to reveal the microstructural of coatings. Experimental results show that the nickel content in these deposits increased with the nickel content of the target material. The major phase of deposited film was Ni3Al regardless of the target materials. All of the as_deposited films presented very strong adhesion and reflects their cavitation erosion behavior in fresh water. All coatings increased the cavitation erosion resistance of the bare …

Go to article

Electrochemical Monitoring On The Deactivation Of A Metallic Oxide Anode, Li-Kun Xu, Shi-Zhe Song, Ting-Yong Wang, Guang-Zhang Chen May 2003

Electrochemical Monitoring On The Deactivation Of A Metallic Oxide Anode, Li-Kun Xu, Shi-Zhe Song, Ting-Yong Wang, Guang-Zhang Chen

Journal of Electrochemistry

The process of accelerated life test of an IrO2/Ta2O5 coated titanium anode was monitored using cyclic voltammetry and electrochemical impedance spectroscopy.The vatiation with electrolysis time of anodic voltammetric charge Q*,the double layer capacitance Cdl,the oxide film resistance Rf and the charge transfer resistance Rct for oxygen evolution was measured.A deactivation mechanism was proposed based on the observation results.

Go to article

Corrosion Behavior Of Mg_(1.85)Mm_(0.15)Ni Hydrogen Storage Alloy Modified By Electroless Cu In Ch_3oh·H_2o Solutions, Hua-Bin Yang, Hai-Chang Zhang, Hua Sun, Xiao-Dan Wang, Zuo-Xiang Zhou May 2003

Corrosion Behavior Of Mg_(1.85)Mm_(0.15)Ni Hydrogen Storage Alloy Modified By Electroless Cu In Ch_3oh·H_2o Solutions, Hua-Bin Yang, Hai-Chang Zhang, Hua Sun, Xiao-Dan Wang, Zuo-Xiang Zhou

Journal of Electrochemistry

The corrosion behavior of the Mg1.85Mm0.15Ni (Mm:Ce_rich mischmetal) alloy modified by electroless Cu coating in different CH3OH_H2O solutions has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy. These results showed that the corrosion behavior was improved after electroless Cu. The potentiodynamic polarization and electrochemical impedance spectroscopy results showed that the alloy electrode had more promising anti_corrosion behavior after coated in a 40%CH3OH_H2O solution. The values of corrosion current density and electrode reaction resistance were 5.6 mA·cm-2(11.7 mA·cm-2 for uncoated alloy electrode) and 22.25 Ω·cm2 (1.99 Ω·cm2 for the uncoated alloy electrode), respectively.

Go to article

A Bilayer Self-Assembled Membrane Electrode For Fluorescence And Its Electrochemical Characterization, Xiang-Ying Sun, Bin Liu, Yun-Bao Jiang May 2003

A Bilayer Self-Assembled Membrane Electrode For Fluorescence And Its Electrochemical Characterization, Xiang-Ying Sun, Bin Liu, Yun-Bao Jiang

Journal of Electrochemistry

The bilayer membrane was assemblied on Au electrode by the electrostatic interaction between the fluorescence regent 1_naphthylamine diacetate acid(NADA) and DL_Cysteine. The SAMs electrode NADA/Cys/Au can be used as fluorescence and electrochemical sensor for metal ions. This paper states the electrochemical characterization of NADA/Cys/Au and SAMs' application in continous determination for Cu2+ and Ni2+.

Go to article

Synthesis And Electrochemical Characteristics Of Nickel-Based Complex Oxide Li_Ani_(0.78)Co_(0.2)Cd_(0.02)O_2, Rong-Zhong Yuan, Mei-Zhen Qu, Zuo-Long Yu May 2003

Synthesis And Electrochemical Characteristics Of Nickel-Based Complex Oxide Li_Ani_(0.78)Co_(0.2)Cd_(0.02)O_2, Rong-Zhong Yuan, Mei-Zhen Qu, Zuo-Long Yu

Journal of Electrochemistry

The nickel_based complex oxide LiaNi0.78Co0.02O2 cathode materials for lithium_ion rechargeable batteries was synthesized by the improved solid_state reaction method with LiOH·H2O, ball_like Cd_doped Ni(OH)2 and Co2O3 as raw materials. The analysis ICP_AES proved that the as_prepared compounds were near the stoichiometric form. The XRD, SEM and electrochemical characteristics testing were also carried out. The results showed that the complex cathode material LiaNi0.78Co0.2Cd0.02O2 has layered structure, homogeneous surface distributions,uniform particles with good crystal morphology as well as stable electrochemical performances. At ambient temperature the resulted materials have a high reversible capacity and good cycling stability.Its highest initial reversible capacity is more …

Go to article

Perfluorinated Sulfonic Acid Lithium Conductivity Humidity Sensor, Hong-Feng Xu, Jing Liu, Li Wan May 2003

Perfluorinated Sulfonic Acid Lithium Conductivity Humidity Sensor, Hong-Feng Xu, Jing Liu, Li Wan

Journal of Electrochemistry

Treat carbon paper with 3% PTFE solution and dried in 340 ℃ for 40 minutes to enhance its intension, and level off the surface of the carbon paper with a mixture of XC_72 carbon black and PTFE solution. With those treated carbon paper as electrodes,recast Nafion thin film from 5% Nafion solution as humidity sensitive material, a solid polymer electrolyte humidity sensor was prepared on a thin PET film.Take the relative humidity data from several saturated salt solutions, the relationship between conductivity response and relative humidity was studied at different relative humidies.The results showed: when the polymer electrolyte was H+ …

Go to article

Conductance Properties For Electrolyte Of Lithium Ion Battery At Low Temperature, Jing-Li Han, Yan-Mei Yu, Jian Chen, Chun-Tong Wang May 2003

Conductance Properties For Electrolyte Of Lithium Ion Battery At Low Temperature, Jing-Li Han, Yan-Mei Yu, Jian Chen, Chun-Tong Wang

Journal of Electrochemistry

The system of LiPF6_ethylene carbonate (EC) _methy1 acetate (MA) was studied. The conductivities of this system were measured under various composition and various salt concentrations at temperature range of 20～-50 ℃. The optimum composition of this system was selected. The tests of cyclic voltammography and charge_discharge were carried out. This system was compared with commercial electrolyte solution.

Go to article

Effect Of Scn~- On The Transition Current Of Zn During The Electrodeposition Zn-Co Alloys, Ren-He Yin, Wei-Min Cao, Zheng-Hua Fang May 2003

Effect Of Scn~- On The Transition Current Of Zn During The Electrodeposition Zn-Co Alloys, Ren-He Yin, Wei-Min Cao, Zheng-Hua Fang

Journal of Electrochemistry

For co_deposition of Zn_Co alloys at sufphate baths with micro_concentration of SCN- the transition current of Zn was found with the deposition process changing from normal Co_deposition to anomalous co_deposition, and the value of transition current increased with increasing SCN- concentration, but decreased with increasing value of pH. The existence of SCN- decreases the evolution overpotential of Co metal, but has no effects on the evolution overpotential of Zn metal and H2.

Go to article

Application Of Biphenyl Electroploymerization For Overcharge Protection In Li-Ion Batteries, Li-Fen Xiao, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang Feb 2003

Application Of Biphenyl Electroploymerization For Overcharge Protection In Li-Ion Batteries, Li-Fen Xiao, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang

Journal of Electrochemistry

The electropolymerization of biphenyl at overcharged positive electrode was investigated for overcharge protection of Li_ion batteries. Biphenyl in electrolyte as an additive can electrochemically polymerize at 4.5～4.75 V(vs. Li/Li+) to form a layer of conductive film on cathode surface. The surface film increases the internal resistance and the gases released during the electropolymerization also increases the internal pressure of the batteries, which therefore enhance the sensitivities of the electrical disconnecting devices. During prolonged overcharge, the growth of the conductive polymer film can create short circuit between the positive and negative electrodes and cause self_discharge of the batteries to a safer …

Go to article

In Situ Measurements Of Solution Conductivity In Microwave Field, Yong-Qing Su, Chun-Peng Liu Feb 2003

In Situ Measurements Of Solution Conductivity In Microwave Field, Yong-Qing Su, Chun-Peng Liu

Journal of Electrochemistry

The curves of the conductivity as a function of temperature for 24 kinds of solutions have been in situ measured both in the microwave field and in absence of microwave field. The results indicated that the relationship between the conductivity in microwave field (Lw) and temperature (T) can be expressed by an equation Lw=a′+b′T+c′T2 , similar to the one that is valid in absence of the microwave field Ln=a+bT+cT2. Conductivity in the absence and presence of microwave field can be linked by the equation ln Lw=A+BLn+CL2n.

Go to article

An Eqcm Study Of Water Adsorption And Oxidation On Pt Electrodes In Sulfate Acid Sulotions, Heng Lin, Sheng-Pei Chen, Jin-Mei Lin, Ai-Lan Lin, Guo-Liang Chen Feb 2003

An Eqcm Study Of Water Adsorption And Oxidation On Pt Electrodes In Sulfate Acid Sulotions, Heng Lin, Sheng-Pei Chen, Jin-Mei Lin, Ai-Lan Lin, Guo-Liang Chen

Journal of Electrochemistry

Simultaneous frequency and current responses during potential cycling of Pt electrode were measured in 0.1 mol·L-1 H2SO4 solution by using EQCM.Quantitative analysis of the mass change revealed that the increase of mass in the hydrogen and double_layer regions in a positive_going potential scan was due to water adsorption on the Pt electrode,further calculation indicated that water molecules adsorbed on Pt electrode in the double_layer regions through a low discharge quomodo .The EQCM studies provided quantitative results of surface mass variation during water adsorption and oxidation,and have thrown new light in elucidating the structure of double_layer between electrode and solution.

Go to article

Development And Study Of The (Ag)-Ni/Cr Composite Plating With Antibacterial Properties And Corrosion Resistance, Ya-Ping Zhao, Jin-Hua Wang, Ren-He Yin, Jin Zheng, Le-Shu Yu Feb 2003

Development And Study Of The (Ag)-Ni/Cr Composite Plating With Antibacterial Properties And Corrosion Resistance, Ya-Ping Zhao, Jin-Hua Wang, Ren-He Yin, Jin Zheng, Le-Shu Yu

Journal of Electrochemistry

The 3_factor and 3_level orthogonal experiment was designed and through the comparison of the different films' antibacterial properties measured by bacterial colony counting and the corrosion resistance studied with the AC impedance method. The optimal plating conditions of the (Ag)_Ni/Cr composite plating, a novel functional plating, were determined.The results have indicated that the (Ag)_Ni/Cr composite plating is characterized by both antibacterial and corrosion resisting properties and has its wide applied prospect.

Go to article

The Preparation And Characterization Of Zno-Pani Composite Film, Yan-Yan Xi, Huai-Guo Huang, Zhi-Xin Zheng, Ping Dong, Jian-Zhang Zhou, Ling-Ling Wu, Zhong-Hua Lin Feb 2003

The Preparation And Characterization Of Zno-Pani Composite Film, Yan-Yan Xi, Huai-Guo Huang, Zhi-Xin Zheng, Ping Dong, Jian-Zhang Zhou, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

ZnO nanoparticle films were prepared on the Au film, PANI film and ITO by sol_gel method, and their morphological optical and photoelectrochemical properties were also studied. The results showed that the porous structure of PANI can suppress the aggregation of ZnO particles, resulting in the blue shift of on_set in the UV_Vis spectra and fluorescence spectra of ZnO_PANI composite film compared with that of ZnO_Au film. It was suggested that the ZnO_PANI composite film can be used in photoelectric coversion.

Go to article

Magnetic Resonance Studies On Lithium Intercalation Into Carbons, Xiao-Rong Zhou, Zhen-Ming Du, Lin Zhuang, Jun-Tao Lu Feb 2003

Magnetic Resonance Studies On Lithium Intercalation Into Carbons, Xiao-Rong Zhou, Zhen-Ming Du, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

The electron spin resonance(ESR) and 7Li_NMR magnetic resonance (7Li_NMR) studies on lithium intercalation into carbons were reviewed based on recently published papers, including those by the authors of this review. Two kinds of electronic spins were found in ESR studies. One corresponds to the charge carrier electrons and is called the Pauli spin. From the ESR intensity of Pauli spins, the curve of the density of electronic states can be deduced for the carbon material studied and, in turn, the contribution of the band model mechanism to the lithium intercalation can be calculated for the given carbon sample. The other …

Go to article

First Prev Next Last