Physical Sciences and Mathematics Commons^™

The Effect Of Amino Acids And Molar Peroxide Ratio On The Oxidation Of 2,4 Dinitroanisole In An Ultraviolet Light Emitting Diode/H2O2 Advanced Oxidation Process, Jeffry P. Hart

Theses and Dissertations

2,4 Dinitroanisole (DNAN) is an organic insensitive munition that is a likely candidate to replace trinitrotoluene (TNT) for a variety of purposes. Advanced Oxidation Processes (AOPs) are a promising method that have the potential to reduce a variety of persistent chemicals, however, the performance of these systems may be degraded by co-contaminants in the influent. In this contribution, DNAN, with casamino acids as a co-contaminant, was oxidized with Ultraviolet (UV) Light Emitting Diodes (LEDs) with hydrogen peroxide (H₂O₂) in an AOP in a laboratory. The UV/ H₂O₂ AOP was capable of degrading DNAN …

An Assessment Of The Spatial Variation Of Isotopic Ratios In A Candu-6 Reactor For Nuclear Treaty Monitoring, Aaron W. Burkhardt

Theses and Dissertations

The Preparatory Commission for the Comprehensive Nuclear Test Ban Treaty Organization developed the International Monitoring System for monitoring for nuclear explosive testing and compliance with nuclear treaties. Many of the International Monitoring System stations are capable of detecting radionuclides that can be used to determine their origin and creation environment. However, there is not a single unique signature associated with each creation environment. Nuclear reactors, for example, can have a wide range of isotopic concentrations caused by spatial variations in neutron flux intensity and energy. As a single sample only provides a single isotopic measurement, this can make disambiguation difficult …

A Machine Learning Approach To Characterizing Particle Morphology In Nuclear Forensics, Daniel A. Gum

Theses and Dissertations

A machine learning approach is taken to characterizing a group of synthetic uranium bearing particles. SEM images of these lab-created particles were converted into a binary representation that captured morphological features in accordance with a guide established by Los Alamos National Laboratory. Each particle in the dataset contains an association with chemical creation conditions: processing method, precipitation temperature and pH, calcination temperature are most closely tied to particle morphology. Additionally, trained classifiers are able to relate final products between particles, implying that morphological features are shared between particles with similar composition.

Creep Of Nextel 720/Alumina Ceramic Matrix Composite With Diamond-Drilled Effusion Holes At 1200°C In Air And In Steam, Megan L. Harkins

Theses and Dissertations

A recent study evaluated tensile stress-strain and tensile creep behavior of an oxide-oxide composite (Nextel™720/alumina) with laser-drilled effusion holes at 1200°C. It was determined that the presence of laser-drilled holes degraded the mechanical properties and performance of the CMC as a result of damage caused to the composite microstructure by the laser drilling process. Based on these results, the present effort sought to assess the effects of diamond-drilled holes on the mechanical behavior of this CMC. Tensile properties of the N720/A composite at 1200°C in laboratory air were unaffected by the presence of an array of 17 diamond-drilled effusion holes. …

Fracture Toughness And Fatigue Crack Growth Rate Characterization Of Inconel 718 Formed By Laser Powder Bed Fusion, Charles C. Hohnbaum

Theses and Dissertations

Continuing improvement in the field of AM of metals provides the opportunity for direct fabrication of aerospace parts. AM was once used in large part for rapid prototyping but improvements in technology and increases in the knowledge base of AM materials has provided the opportunity for manufacture of AM parts for operational use. The ability to create low numbers of unique parts without having to invest in expensive tooling provides great economic incentive to utilize this technique. IN718 is the most common high temperature alloy used in the aerospace industry and lends itself readily to formation by LPBF. The superior …

Control Strategies For Multi-Evaporator Vapor Compression Cycles, Sunderlin D. Jackson

Theses and Dissertations

Next-generation military aircraft must be able to handle highly transient thermal loads that exceed the ability of current aircraft thermal subsystems. Vapor compression cycle systems are a particular refrigeration technology that is an attractive solution for dealing with this challenge, due primarily to their high efficiency. However, there are several barriers to realizing the benefits of vapor cycles systems for controlling thermal loads in military aircraft. This thesis focuses on addressing the challenge of controlling vapor cycles in the presence of highly transient evaporator heat loads. Specifically, a linear quadratic regulator (LQR) is designed for a simple vapor cycle system, …

Process Parameter Development Of Additively Manufactured Af9628 Weapons Steel, Erin M. Hager

Theses and Dissertations

The manufacture of components in Additive Manufacturing processes is limited by the range of materials available. Qualification of materials for Additive Manufacturing is time intensive, and is often specific to a single type of machine. In this study, an approach to selecting power, speed, and hatch spacing values for a newly powderized material, AF9628 weapons steel, is described that results in highly dense (>99.9%) parts on an MLab 200R Cusing. Initial power and speed values used in a weld track study were selected based on a survey of parameters used on similar materials, with a focus on the energy …

Improving Fallout Characterization By Using Multivariate Techniques To Determine Composition, Christopher R. Pitkins

Theses and Dissertations

Multivariate statistical techniques have been applied in order to un-mix nuclear fallout debris chemical data. This information is critical to characterization of fallout particle formation following a nuclear detonation. Understanding the correlation between environmental precursors and actinide concentrations in post-detonation nuclear fallout material aids in understanding the physical and chemical processes that alter nuclear device signatures in the fireball. This research examines 123 nuclear fallout samples from a historical nuclear test. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) are used to collect chemical compositions of the fallout samples. Principal component analysis (PCA) is applied in order to examine …

Removal Of Perfluorooctanoic Acid From Water Using Primitive, Conventional And Novel Carbonaceous Sorbent Materials, Christopher K. Brown

Theses and Dissertations

Polyfluoroalkyl Substances (PFAS), like perfluorooctanoic acid, have been used for the last 50 years in a wide variety of industrial processes and consumer-based products, including polymer additives, lubricants, fire retardants and suppressants, pesticides, and surfactants (Buck et al. 2015). The Department of Defense (DoD) has used PFAS-based Aqueous Film Forming Foam (AFFF) at fire training facilities and aircraft hangars. AFFF has contaminated approximately 600 sites classified as fire training facilities with PFAS (Huang, 2013).

This study focused on testing the most likely carbonaceous adsorbent compounds to remediate PFAS-contaminated sites on Air Force installations. Batch tests were performed to determine the …

Electronic Structure Of Lithium Tetraborate, David J. Wooten

Theses and Dissertations

Due to interest as neutron detection material, an investigation of Li₂B₄O₇(110) and Li₂B₄O₇(100) was undertaken, utilizing photoemission and inverse photoemission spectroscopic techniques. The measured band gap depended on crystallographic direction with the band gaps ranging from 8.9±0.5 eV to 10.1±0.5 eV. The measurement yielded a density of states that qualitatively agreed with the theoretical results from model bulk band structure calculations for Li₂B₄O₇; albeit with a larger band gap than predicted, but consistent with the known deficiencies of LDA and DFT calculations. …

Changes To Electrical Conductivity In Irradiated Carbon-Nickel Nanocomposites, David F. Coy

Theses and Dissertations

Pre and post irradiation resistivity and XAFS measurements have been conducted to examine the effects of 0.5 MeV electron irradiations on nickel-carbon composites. Results showed a decrease in surface resistivity in all sample types of 14-30% following irradiation with a total electron exposure of 4 x 10^-16 cm^-2. Results also showed a corresponding decrease in NiO content for the irradiated samples as compared to measurements of non-irradiated samples. Surface resistivity measurement capabilities were established and measurement techniques refined to produce repeatable results of sufficient precision to discern changes in resistivity for an exposure of 2 x 10 …

Improved Modeling Of Midlatitude D-Region Ionospheric Absorption Of High Frequency Radio Signals During Solar X-Ray Flares, Evelyn A. Schumer

Theses and Dissertations

The purpose of this research was to improve modeling of midlatitude D-region ionospheric absorption of high frequency radio signals during solar X-ray flares through analysis of HF propagation data obtained during the HF Investigation of D-region Ionospheric Variation Experiment (HIDIVE) and obtained at the Canadian Space Agency NORSTAR riometer in Pinawa, Manitoba, Canada and X-ray flux data, as reported by GOES satellites. The findings of the data analysis were then used to validate and suggest improvements for two existing HF absorption models, the operational Space Weather Prediction Center (SWPC) D-region Absorption model and the physical AbbyNormal model. Analysis of the …

Three Dimensional Positron Annihilation Momentum Measurement Technique (3dpamm) Applied To Measure Oxygen-Atom Defects In 6h Silicon Carbide, Christopher S. Williams

Theses and Dissertations

A three-dimensional Positron Annihilation Spectroscopy System (3DPASS) capable to simultaneously measure three-dimensional electron-positron (e--e+) momentum densities measuring photons derived from e--e+ annihilation events was designed and characterized. 3DPASS simultaneously collects a single data set of correlated energies and positions for two coincident annihilation photons using solid-state double-sided strip detectors (DSSD). Positions of photons were determined using an interpolation method which measures a figure-of-merit proportional to the areas of transient charges induced on both charge collection strips directly adjacent to the charge collection strips interacting with the annihilation photons. The subpixel resolution was measured for both double-sided strip detectors (DSSD) and …

Calculation Of Collisional Cross Sections For The ²P3/2 > ²P1/2 Transition In Alkali-Noble Gas Systems, Samuel D. Butler

Theses and Dissertations

Collisional cross sections were calculated as a function of energy for two coupled one dimensional, spherically symmetric potentials. The Split Operator Method was used to propagate an initial Moller state, chosen to be a Gaussian in the asymptotic limit, through a potential. The correlation between the wave packet and Moller final state was calculated at each time step. Using the Channel Packet Method, the correlation function was used to obtain scattering matrix elements. From scattering matrix elements for several different effective potential values and using the Method of Partial Waves, the collisional cross section is calculated for the transition from …

Optical Properties Of Si, Ge, Gaas, Gasb, Inas, And Inp At Elevated Temperatures, Thomas R. Harris

Theses and Dissertations

Investigation of the optical and electrical behavior of some semiconductors at very high temperatures has not been an area of much study, at least not experimentally. The importance of such research becomes obvious due to the effects of high temperatures on semiconductor devices such as infrared detectors and light emitters. Besides the destructive effects of thermal stress and melting, changes in the optical properties of the material can greatly affect device performance. In this research, the infrared absorption of Si, Ge, GaAs, GaSb, InAs, and InP was measured from 0.6 to 25 μm at temperatures ranging from 295 up to …

Experimental Validation Techniques For The Heleeos Off-Axis Laser Propagation Model, John D. Haiducek

Theses and Dissertations

The High Energy Laser End-to-End Operational Simulation (HELEEOS) off-axis scattering algorithm is designed to predict the irradiance that will be detected at a given off-axis location due to atmospheric scattering of a high-energy laser. The HELEEOS system models the propagation of the laser through the atmosphere, accounting for such effects as turbulence, thermal blooming, and atmospheric absorption. The HELEEOS off-axis scattering algorithm uses the scattering phase functions of the Mie scattering models to predict the amount of radiation that will be scattered toward a particular observation location from each point along the beam path, and the total irradiance that will …

In-Situ, Gate Bias Dependent Study Of Neutron Irradiation Effects On Algan/Gan Hfets, Janusz K. Mikina

Theses and Dissertations

AlGaN/GaN Heterostructure Field Effect Transistors (HFETs) have come under increased study in recent years due to their highly desirable material and electrical properties and survivability even during and after exposure to extreme temperature and radiation environments. In this study, unpassivated and SiN passivated Al_0.27Ga_0.73N/GaN HFETs were subjected to neutron radiation at 120 K. The primary focus of the research was the effects of neutron irradiation on drain current, gate leakage current, threshold voltage shift, gate-channel capacitance, and the effects of biasing the gate during irradiation. In-situ measurements were conducted on transistor current, gate-channel capacitance, and gate …

The Material Properties Of Cssnbr3 And Csbr:Sn-1% And Their Potential As Scintillator Detector Material, Neal B. Kleinschmidt

Theses and Dissertations

The search for superior nuclear radiation detection materials is ongoing. Current scintillator materials using Thallium doped Sodium Iodide or Cesium Iodide are the benchmarks for ease of use and quick identification of isotope species. This research aims to explore Cesium Bromide doped with 1% molar tin (CsBr:Sn-1%) and Cesium Tin Bromide (CsSnBr₃) as candidate materials for a new scintillator. The techniques of Extended X-Ray Absorption Fine Structure (EXAFS), X-Ray Absorption Near Edge Structure (XANES) and Cathodoluminescence are used to determine the suit- ability of CsSnBr3 and CsBr:Sn-1% with Sn⁴⁺ as a potential scintillator materials and explore their …

Advanced Radiometry For High Discrimination Explosive Fireball Discrimination, Steven E. Slagle

Theses and Dissertations

The high explosive fireball phenomenological model for the mid wave infrared spectrum, developed by AFIT, performs classification from spectral signatures was modified to use radiometric intensities. Five bands were sequentially fit to derive the five physical fit parameters describing the fireball's temperature, size, soot absorption coefficient within 16% and emissions from the H₂O and CO₂ concentrations within 333% of the spectral model. This was improved by changing the model's band sizes, center, and fitting methods where all five fit parameters were matched to within 17% of spectral model. This demonstrated that a combination of radiometric intensities could …

The Effective Potential Energy Surfaces Of The Nonadiabatic Collision B(2PJA) + H2(1Σ+G,Ν,J) ↔ B(2PJ'A) + H2(1Σ+G,Ν',J'), Matthew B. Garvin

Theses and Dissertations

Effective potential energy surfaces (PESs) are calculated for a nonadiabatic collision . This calculation employed 1 ²A', 2 ²A' and 1 ²A" adiabatic PESs numerically calculated at the state-averaged multiconfigurational self-consistent field (SA-MCSCF)/configuration interaction (CI) level for several values of the H₂ bond length, H₂ orientation angle, and boron distance. The associated nonadiabatic coupling terms (NACTs) were calculated from the SA-MCSCF/CI wave functions using analytic gradient techniques. A line integral through the NACTs was then used to determine the adiabatic-to-diabatic mixing angle required to transform from the 1 ²A' and 2 ²A' …

Q-Switched And Mode Locked Short Pulses From A Diode Pumped, Yb-Doped Fiber Laser, Seth M. Swift

Theses and Dissertations

A diode-pumped, ytterbium (Yb)-doped fiber laser system was designed and demonstrated to operate in continuous wave (cw), passively Q-switched and possibly passively mode locked operation. To our knowledge, this was the first fiber laser oscillator built at the Air Force Institute of Technology. A Cr⁴⁺:YAG (Chromium: Ytterbium Aluminum Garnett) crystal was used as a saturable absorber to generate Q-switched pulses. Attempts to mode lock the laser were performed using a semiconductor saturable absorber mirror (SESAM) and through nonlinear polarization rotation (NPR). The best output power result was 5 Watts (W) while pumping at 8.3 W, yielding 60% efficiency …

Investigation Of Electrical And Optical Properties Of Bulk Iii-V Ternary Semiconductors, Travis C. Gomez

Theses and Dissertations

Bulk grown III-V ternary semiconductors of In_0.08Ga_0.92Sb and In_0.15Ga_0.85As were investigated through Hall-effect and photoluminescence measurements to determine carrier concentration, mobility, sheet resistivity, and luminescence spectrum. In the past, epitaxial layers of ternary compounds have been grown on binary compound substrates, and thus very limited lattice matched ternary alloys were available. Recently, bulk grown ternary substrates have been developed, and it has presented a renewed interest in using these substrates to grow high quality ternary compounds for use in many next generation optoelectronic devices. The results of photoluminescence (PL) study for the …

Nondestructive Evaluation Of Aircraft Composites Using Terahertz Time Domain Spectroscopy, Christopher D. Stoik

Theses and Dissertations

Terahertz (THz) time domain spectroscopy (TDS) was assessed as a nondestructive evaluation technique for aircraft composites. Material properties of glass fiber composite were measured using both transmission and reflection configuration. The interaction of THz with a glass fiber composite was then analyzed, including the effects of scattering, absorption, and the index of refraction, as well as effective medium approximations. THz TDS, in both transmission and reflection configuration, was used to study composite damage, including voids, delaminations, mechanical damage, and heat damage. Measurement of the material properties on samples with localized heat damage showed that burning did not change the refractive …

Oxygenation Of The Root Zone And Tce Remediation: A Plant Model Of Rhizosphere Dynamics, Ian F. Thompson

Theses and Dissertations

This study analyzes rhizosphere conditions that enhance the effective aerobic degradation of TCE in wetland bioremediation systems. A plant model was built using Stella 9.0 modeling software and uses numerical integration evaluation; it addresses movement of oxygen through plant vascular and aerenchymal systems, and into the rhizosphere where oxygen and other substrates influence bacteria. Methanotrophs and heterotrophs are assumed to be influential bacteria groups. Variations of humidity-induced-convection, methane, soil carbon, and copper concentrations are evaluated. Varying concentrations and hydraulic loadings of TCE are assessed with respect to TCE consumption rate and TCE treatment efficiency. Soil conditions most directly affected TCE …

Comparative Kinetics And Distribution To Target Tissues Of Organophosphates Using Physiologically-Based Pharmacokinetic Modeling, Rick E. Vermillion

Theses and Dissertations

A physiologically-based pharmacokinetic model has been developed to examine the effects of organophosphates on the levels of acetylcholine in different tissues throughout the mammalian body. Many organophosphate-like chemical and kinetic characteristics are tested without reference to a specific chemical. Characteristics include partition coefficients, metabolic constants, the inhibition coefficient, the aging rate, and the regeneration rate. Two separate exposure scenarios are tested and compared against a baseline. The baseline consists of a direct inhalation exposure. The first exposure scenario examines the effects of bronchial scrubbing (via inhalation) and the second scenario is a study of dermal exposures and compares the levels …

Molecular Characterization Of Wetland Soil Bacterial Community In Constructed Mesocosms, Ethan C. Bishop

Theses and Dissertations

The use of wetlands to effectively remediate aquifers contaminated with chlorinated solvents is an emerging technique, which shows high promise. In order to better understand this process and test its legitimacy, a treatment wetland was constructed at Wright-Patterson AFB, Dayton, Ohio and, in a joint effort with Wright State University (WSU), has previously shown the effective removal of PCE. The purpose of this research was to characterize the soil bacterial community, pre-PCE injection, among three wetland plant species from the sedge family (Cyperaceae) within constructed wetland mesocosms and to identify any bacterial dominance. Carex comosa, Scirpus atrovirens, and Eleocharis erythropoda …

Evaluation Of Chlorinated Solvent Removal Efficiency Among Three Wetland Plant Species: A Mesocom Study, Jun Yan

Theses and Dissertations

Different species of plants need to be studied individually to compare the remediation efficiency of each species. This research will study three different wetland plants species and an unplanted control, under a laboratory setting. Each plant has a different characteristic favorable for chlorinated solvent degradation. Eleocharis erythropoda (Spike Rush) are plants with thin tube like leaves and large root mass. Carex comosa (Bearded Sedge) has broad leaves and Scirpus atrovirens (Green Bulrush) are broad leafed wetland plants with a long flowering stem during reproduction. PCE will be injected into the plant mesocosm and any possible PCE degradation will be observed. …

Non-Adiabatic Energy Surfaces Of The B+H2 Systems, Lachlan T. Belcher

Theses and Dissertations

In order to solve the dynamics of a system, the kinetic energy operator of the Hamiltonian must be diagonalized. Diagonalization requires rotation of the system into a non-adiabatic representation. This rotation is a coupling angle determined by the derivative coupling terms. Derivative coupling terms are calculated using Columbus and Brooklyn, software packages. Separation of internal dynamics characterized by Jacobi coordinates, and external dynamics characterized by a set of Euler angles and the center of mass position, requires a transformation from Cartesian coordinates to Jacobi coordinates required for subsequent dynamical calculations. Previous attempts to solve for non-adiabatic energy surfaces in this …

Optimal Sampling Of A Chemical Hazard Area, Jennifer R. Plourde

Theses and Dissertations

This thesis proposes a methodology for optimally sampling a chemical hazard area subsequent to a chemical weapons attack. The objective is to identify the maximum number of areas that no longer require protective gear for safe operations. We model the area as an undirected graph and employ network analysis techniques to provide a methodological framework for identifying an optimal sampling sequence within a fixed time limit. We propose four models that characterize the secondary vapor concentrations: i) static and deterministic, ii) static and stochastic, iii) dynamic and deterministic, and iv) dynamic and stochastic. Comparisons of the static cases and their …

An Investigation Into Palladium-Catalyzed Reduction Of Perchlorate In Water, Eric G. Barney

Theses and Dissertations

In this study, application of a catalytic reactor to facilitate chemical reduction of perchlorate was investigated. Palladium-coated pellets were used as the catalyst, and formic acid was used as the reductant. Reactor performance was evaluated under a variety of operating conditions (influent pH, reductant concentration, residence time). Very little perchlorate reduction was observed under any operating condition. At best, approximately 8% perchlorate reduction was observed. This small reduction efficiency is clearly not sufficient for environmental treatment applications. Perchlorate strongly adsorbed to the catalyst at low pH (3 - 3.3). At higher pH (4 - 10), little adsorption was observed. This …