Physical Sciences and Mathematics Commons^™

Development Of A Methodology For The Quantification Of Reaerosolization Of A Biological Contaminate Surrogate Particle From A Military Uniform Fabric, George Cooksey, Jeremy M. Slagley, Casey W. Cooper, Douglas Lewis, Alisha Helm

Faculty Publications

In a mass casualty medical evacuation after a bioaerosol (BA) dispersal event, a decontamination (DC) method is needed that can both decontaminate and prevent biological particle (BP) re-aerosolization (RA) of contaminated clothes. However, neither the efficacy of current DC methods nor the risk of BP RA is greatly explored in the existing literature. The goals of this study were to develop a repeatable method to quantify the RA of a biological contaminant off military uniform fabric swatches and to test the efficacy of one DC protocol (high-volume, low-pressure water) using 1 µm polystyrene latex (PSL) spheres as a surrogate. A …

A Computational Approach For Mapping Electrochemical Activity Of Multi-Principal Element Alloys, Jodie A. Yuwono, Xinyu Li, Tyler D. Dolezal, Adib J. Samin, Javen Qinfeng Shi, Zhipeng Li, Nick Birbilis

Faculty Publications

Multi principal element alloys (MPEAs) comprise an atypical class of metal alloys. MPEAs have been demonstrated to possess several exceptional properties, including, as most relevant to the present study a high corrosion resistance. In the context of MPEA design, the vast number of potential alloying elements and the staggering number of elemental combinations favours a computational alloy design approach. In order to computationally assess the prospective corrosion performance of MPEA, an approach was developed in this study. A density functional theory (DFT) – based Monte Carlo method was used for the development of MPEA ‘structure’; with the AlCrTiV alloy used …

Fate And Transport Of Per- And Polyfluoroalkyl Substances (Pfas) At Aqueous Film Forming Foam (Afff) Discharge Sites: A Review, Jeffery T. Mcgarr, Eric G. Mbonimpa, Drew C. Mcavoy, Mohamad R. Soltanian

Faculty Publications

Per- and polyfluorinated alkyl substances (PFAS) are an environmentally persistent group of chemicals that can pose an imminent threat to human health through groundwater and surface water contamination. In this review, we evaluate the subsurface behavior of a variety of PFAS chemicals with a focus on aqueous film forming foam (AFFF) discharge sites. AFFF is the primary PFAS contamination risk at sites such as airports and military bases due to use as a fire extinguisher. Understanding the fate and transport of PFAS in the subsurface environment is a multifaceted issue. This review focuses on the role of adsorbent, adsorbate, and …

Reinvigorating A Technical Countering Weapons Of Mass Destruction Distance Learning Graduate Certificate Program, James C. Petrosky, Gaiven Varshney, Jeremy Slagley, Sara Shaghaghi

Faculty Publications

Current Countering Weapons of Mass Destruction (CWMD) demands can be divided broadly into policy and science. The science of chemical, biological, and radiological/nuclear weapons informs the limits of development, production, employment, operation, detection, risk characterization, human and material protection, and medical intervention. In short, the science of weapons of mass destruction (WMD) should precede and inform the development of policy. It is to this end that the Air Force Institute of Technology (AFIT) CWMD program was re-established, providing a technical educational option for practitioners to understand the science behind a very technically challenging subject.

The Effect Of Amino Acids And Molar Peroxide Ratio On The Oxidation Of 2,4 Dinitroanisole In An Ultraviolet Light Emitting Diode/H2O2 Advanced Oxidation Process, Jeffry P. Hart

Theses and Dissertations

2,4 Dinitroanisole (DNAN) is an organic insensitive munition that is a likely candidate to replace trinitrotoluene (TNT) for a variety of purposes. Advanced Oxidation Processes (AOPs) are a promising method that have the potential to reduce a variety of persistent chemicals, however, the performance of these systems may be degraded by co-contaminants in the influent. In this contribution, DNAN, with casamino acids as a co-contaminant, was oxidized with Ultraviolet (UV) Light Emitting Diodes (LEDs) with hydrogen peroxide (H₂O₂) in an AOP in a laboratory. The UV/ H₂O₂ AOP was capable of degrading DNAN …

3-D Fabry–Pérot Cavities Sculpted On Fiber Tips Using A Multiphoton Polymerization Process, Jonathan W. Smith, Jeremiah C. Williams, Joseph S. Suelzer, Nicholas G. Usechak, Hengky Chandrahalim

Faculty Publications

This paper presents 3-D Fabry–Pérot (FP) cavities fabricated directly onto cleaved ends of low-loss optical fibers by a two-photon polymerization (2PP) process. This fabrication technique is quick, simple, and inexpensive compared to planar microfabrication processes, which enables rapid prototyping and the ability to adapt to new requirements. These devices also utilize true 3-D design freedom, facilitating the realization of microscale optical elements with challenging geometries. Three different device types were fabricated and evaluated: an unreleased single-cavity device, a released dual-cavity device, and a released hemispherical mirror dual-cavity device. Each iteration improved the quality of the FP cavity's reflection spectrum. The …

An Assessment Of The Spatial Variation Of Isotopic Ratios In A Candu-6 Reactor For Nuclear Treaty Monitoring, Aaron W. Burkhardt

Theses and Dissertations

The Preparatory Commission for the Comprehensive Nuclear Test Ban Treaty Organization developed the International Monitoring System for monitoring for nuclear explosive testing and compliance with nuclear treaties. Many of the International Monitoring System stations are capable of detecting radionuclides that can be used to determine their origin and creation environment. However, there is not a single unique signature associated with each creation environment. Nuclear reactors, for example, can have a wide range of isotopic concentrations caused by spatial variations in neutron flux intensity and energy. As a single sample only provides a single isotopic measurement, this can make disambiguation difficult …

A Machine Learning Approach To Characterizing Particle Morphology In Nuclear Forensics, Daniel A. Gum

Theses and Dissertations

A machine learning approach is taken to characterizing a group of synthetic uranium bearing particles. SEM images of these lab-created particles were converted into a binary representation that captured morphological features in accordance with a guide established by Los Alamos National Laboratory. Each particle in the dataset contains an association with chemical creation conditions: processing method, precipitation temperature and pH, calcination temperature are most closely tied to particle morphology. Additionally, trained classifiers are able to relate final products between particles, implying that morphological features are shared between particles with similar composition.

The Lowest-Energy Isomer Of C2si2h4 Is A Bridged Ring: Reinterpretation Of The Spectroscopic Data Based On Dft And Coupled-Cluster Calculations, Jesse J. Lutz, Larry W. Burggraf

Faculty Publications

The lowest-energy isomer of C₂Si₂H₄ is determined by high-accuracy ab initio calculations to be the bridged four-membered ring 1,2-didehydro-1,3-disilabicyclo[1.1.0]butane (1), contrary to prior theoretical and experimental studies favoring the three-member ring silylsilacyclopropenylidene (2). These and eight other low-lying minima on the potential energy surface are characterized and ordered by energy using the CCSD(T) method with complete basis set extrapolation, and the resulting benchmark-quality set of relative isomer energies is used to evaluate the performance of several comparatively inexpensive approaches based on many-body perturbation theory and density functional theory (DFT). Double-hybrid DFT methods are found to …

Control Strategies For Multi-Evaporator Vapor Compression Cycles, Sunderlin D. Jackson

Theses and Dissertations

Next-generation military aircraft must be able to handle highly transient thermal loads that exceed the ability of current aircraft thermal subsystems. Vapor compression cycle systems are a particular refrigeration technology that is an attractive solution for dealing with this challenge, due primarily to their high efficiency. However, there are several barriers to realizing the benefits of vapor cycles systems for controlling thermal loads in military aircraft. This thesis focuses on addressing the challenge of controlling vapor cycles in the presence of highly transient evaporator heat loads. Specifically, a linear quadratic regulator (LQR) is designed for a simple vapor cycle system, …

Fracture Toughness And Fatigue Crack Growth Rate Characterization Of Inconel 718 Formed By Laser Powder Bed Fusion, Charles C. Hohnbaum

Theses and Dissertations

Continuing improvement in the field of AM of metals provides the opportunity for direct fabrication of aerospace parts. AM was once used in large part for rapid prototyping but improvements in technology and increases in the knowledge base of AM materials has provided the opportunity for manufacture of AM parts for operational use. The ability to create low numbers of unique parts without having to invest in expensive tooling provides great economic incentive to utilize this technique. IN718 is the most common high temperature alloy used in the aerospace industry and lends itself readily to formation by LPBF. The superior …

Creep Of Nextel 720/Alumina Ceramic Matrix Composite With Diamond-Drilled Effusion Holes At 1200°C In Air And In Steam, Megan L. Harkins

Theses and Dissertations

A recent study evaluated tensile stress-strain and tensile creep behavior of an oxide-oxide composite (Nextel™720/alumina) with laser-drilled effusion holes at 1200°C. It was determined that the presence of laser-drilled holes degraded the mechanical properties and performance of the CMC as a result of damage caused to the composite microstructure by the laser drilling process. Based on these results, the present effort sought to assess the effects of diamond-drilled holes on the mechanical behavior of this CMC. Tensile properties of the N720/A composite at 1200°C in laboratory air were unaffected by the presence of an array of 17 diamond-drilled effusion holes. …

Process Parameter Development Of Additively Manufactured Af9628 Weapons Steel, Erin M. Hager

Theses and Dissertations

The manufacture of components in Additive Manufacturing processes is limited by the range of materials available. Qualification of materials for Additive Manufacturing is time intensive, and is often specific to a single type of machine. In this study, an approach to selecting power, speed, and hatch spacing values for a newly powderized material, AF9628 weapons steel, is described that results in highly dense (>99.9%) parts on an MLab 200R Cusing. Initial power and speed values used in a weld track study were selected based on a survey of parameters used on similar materials, with a focus on the energy …

Improving Fallout Characterization By Using Multivariate Techniques To Determine Composition, Christopher R. Pitkins

Theses and Dissertations

Multivariate statistical techniques have been applied in order to un-mix nuclear fallout debris chemical data. This information is critical to characterization of fallout particle formation following a nuclear detonation. Understanding the correlation between environmental precursors and actinide concentrations in post-detonation nuclear fallout material aids in understanding the physical and chemical processes that alter nuclear device signatures in the fireball. This research examines 123 nuclear fallout samples from a historical nuclear test. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) are used to collect chemical compositions of the fallout samples. Principal component analysis (PCA) is applied in order to examine …

Single-Reference Coupled Cluster Theory For Multi-Reference Problems, Johannes T. Margraf, Ajith Perera, Jesse J. Lutz, Rodney J. Bartlett

Faculty Publications

Coupled cluster (CC) theory is widely accepted as the most accurate and generally applicable approach in quantum chemistry. CC calculations are usually performed with single Slater-determinant references, e.g., canonical Hartree-Fock (HF) wavefunctions, though any single determinant can be used. This is an attractive feature because typical CC calculations are straightforward to apply, as there is no potentially ambiguous user input required. On the other hand, there can be concern that CC approximations give unreliable results when the reference determinant provides a poor description of the system of interest, i.e., when the HF or any other single determinant ground state has …

Predictive Coupled-Cluster Isomer Orderings For Some SiNCM (M, N ≤ 12) Clusters: A Pragmatic Comparison Between Dft And Complete Basis Limit Coupled-Cluster Benchmarks, Jason N. Byrd, Jesse J. Lutz, Duminda S. Ranasinghe, Yifan Jin, Ajith Perera, Xiaofeng F. Duan, Larry W. Burggraf, John A. Montgomery Jr.

Faculty Publications

The accurate determination of the preferred Si₁₂C₁₂ isomer is important to guide experimental efforts directed towards synthesizing SiC nano-wires and related polymer structures which are anticipated to be highly efficient exciton materials for opto-electronic devices. In order to definitively identify preferred isomeric structures for silicon carbon nano-clusters, highly accurate geometries, energies and harmonic zero point energies have been computed using coupled-cluster theory with systematic extrapolation to the complete basis limit for set of silicon carbon clusters ranging in size from SiC₃ to Si₁₂C₁₂. It is found that post-MBPT(2) correlation energy plays a …

Removal Of Perfluorooctanoic Acid From Water Using Primitive, Conventional And Novel Carbonaceous Sorbent Materials, Christopher K. Brown

Theses and Dissertations

Polyfluoroalkyl Substances (PFAS), like perfluorooctanoic acid, have been used for the last 50 years in a wide variety of industrial processes and consumer-based products, including polymer additives, lubricants, fire retardants and suppressants, pesticides, and surfactants (Buck et al. 2015). The Department of Defense (DoD) has used PFAS-based Aqueous Film Forming Foam (AFFF) at fire training facilities and aircraft hangars. AFFF has contaminated approximately 600 sites classified as fire training facilities with PFAS (Huang, 2013).

This study focused on testing the most likely carbonaceous adsorbent compounds to remediate PFAS-contaminated sites on Air Force installations. Batch tests were performed to determine the …

Reconfigurable Solid-State Dye-Doped Polymer Ring Resonator Lasers, Hengky Chandrahalim, Xudong Fan

Faculty Publications

This paper presents wavelength configurable on-chip solid-state ring lasers fabricated by a single-mask standard lithography. The single- and coupled-ring resonator hosts were fabricated on a fused-silica wafer and filled with 3,3′-Diethyloxacarbocyanine iodide (CY3), Rhodamine 6G (R6G) and 3,3′-Diethylthiadicarbocyanine iodide (CY5)-doped polymer as the reconfigurable gain media. The recorded lasing threshold was ~220 nJ/mm² per pulse for the single-ring resonator laser with R6G, marking the lowest threshold shown by solid-state dye-doped polymer lasers fabricated with a standard lithography process on a chip. A single-mode lasing from a coupled-ring resonator system with the lasing threshold of ~360 nJ/mm² per pulse …

Remote Sensing Phase Fluorimetry Using Mercury Vapor Lamp, Matthew J. Bohn, Michael A. Lundin

AFIT Patents

An efficient and portable method for remote detection of a target mineral material through frequency domain fluorimetry, a detection technique that measures the time lag between absorption and emission of photons, thereby determining the lifetime of said target mineral material. As claimed and disclosed in the present invention, mercury vapor lamps, a common source of industrial facility lighting, emit radiation that overlaps the UV/blue absorption spectrum of many fluorophores and may be used as an efficient and portable excitation source for remote frequency domain fluorimetry.

Using Nanotechnology To Detect Nerve Agents, Mark N. Goltz, Dong-Shik Kim, Leeann Racz

Faculty Publications

Nanotechnology has opened a wide range of opportunities having potential impacts in areas as diverse as medicine and consumer products. In collaboration with researchers at the University of Toledo UT, Air Force Institute of Technology AFIT scientists are exploring the possibility of using a nanoscale organic matrix to detect organophosphate OP nerve agents. Current techniques for detecting OP compounds are expensive and time consuming. Developing a nanoscale organic matrix sensor would allow for direct, real-time sensing under field conditions. This article describes the science behind such a sensor and its possible applications. High-performance sensors are needed to protect Soldiers and …

Electronic Structure Of Lithium Tetraborate, David J. Wooten

Theses and Dissertations

Due to interest as neutron detection material, an investigation of Li₂B₄O₇(110) and Li₂B₄O₇(100) was undertaken, utilizing photoemission and inverse photoemission spectroscopic techniques. The measured band gap depended on crystallographic direction with the band gaps ranging from 8.9±0.5 eV to 10.1±0.5 eV. The measurement yielded a density of states that qualitatively agreed with the theoretical results from model bulk band structure calculations for Li₂B₄O₇; albeit with a larger band gap than predicted, but consistent with the known deficiencies of LDA and DFT calculations. …

Changes To Electrical Conductivity In Irradiated Carbon-Nickel Nanocomposites, David F. Coy

Theses and Dissertations

Pre and post irradiation resistivity and XAFS measurements have been conducted to examine the effects of 0.5 MeV electron irradiations on nickel-carbon composites. Results showed a decrease in surface resistivity in all sample types of 14-30% following irradiation with a total electron exposure of 4 x 10^-16 cm^-2. Results also showed a corresponding decrease in NiO content for the irradiated samples as compared to measurements of non-irradiated samples. Surface resistivity measurement capabilities were established and measurement techniques refined to produce repeatable results of sufficient precision to discern changes in resistivity for an exposure of 2 x 10 …

Improved Modeling Of Midlatitude D-Region Ionospheric Absorption Of High Frequency Radio Signals During Solar X-Ray Flares, Evelyn A. Schumer

Theses and Dissertations

The purpose of this research was to improve modeling of midlatitude D-region ionospheric absorption of high frequency radio signals during solar X-ray flares through analysis of HF propagation data obtained during the HF Investigation of D-region Ionospheric Variation Experiment (HIDIVE) and obtained at the Canadian Space Agency NORSTAR riometer in Pinawa, Manitoba, Canada and X-ray flux data, as reported by GOES satellites. The findings of the data analysis were then used to validate and suggest improvements for two existing HF absorption models, the operational Space Weather Prediction Center (SWPC) D-region Absorption model and the physical AbbyNormal model. Analysis of the …

Three Dimensional Positron Annihilation Momentum Measurement Technique (3dpamm) Applied To Measure Oxygen-Atom Defects In 6h Silicon Carbide, Christopher S. Williams

Theses and Dissertations

A three-dimensional Positron Annihilation Spectroscopy System (3DPASS) capable to simultaneously measure three-dimensional electron-positron (e--e+) momentum densities measuring photons derived from e--e+ annihilation events was designed and characterized. 3DPASS simultaneously collects a single data set of correlated energies and positions for two coincident annihilation photons using solid-state double-sided strip detectors (DSSD). Positions of photons were determined using an interpolation method which measures a figure-of-merit proportional to the areas of transient charges induced on both charge collection strips directly adjacent to the charge collection strips interacting with the annihilation photons. The subpixel resolution was measured for both double-sided strip detectors (DSSD) and …

Calculation Of Collisional Cross Sections For The ²P3/2 > ²P1/2 Transition In Alkali-Noble Gas Systems, Samuel D. Butler

Theses and Dissertations

Collisional cross sections were calculated as a function of energy for two coupled one dimensional, spherically symmetric potentials. The Split Operator Method was used to propagate an initial Moller state, chosen to be a Gaussian in the asymptotic limit, through a potential. The correlation between the wave packet and Moller final state was calculated at each time step. Using the Channel Packet Method, the correlation function was used to obtain scattering matrix elements. From scattering matrix elements for several different effective potential values and using the Method of Partial Waves, the collisional cross section is calculated for the transition from …

Optical Properties Of Si, Ge, Gaas, Gasb, Inas, And Inp At Elevated Temperatures, Thomas R. Harris

Theses and Dissertations

Investigation of the optical and electrical behavior of some semiconductors at very high temperatures has not been an area of much study, at least not experimentally. The importance of such research becomes obvious due to the effects of high temperatures on semiconductor devices such as infrared detectors and light emitters. Besides the destructive effects of thermal stress and melting, changes in the optical properties of the material can greatly affect device performance. In this research, the infrared absorption of Si, Ge, GaAs, GaSb, InAs, and InP was measured from 0.6 to 25 μm at temperatures ranging from 295 up to …

Experimental Validation Techniques For The Heleeos Off-Axis Laser Propagation Model, John D. Haiducek

Theses and Dissertations

The High Energy Laser End-to-End Operational Simulation (HELEEOS) off-axis scattering algorithm is designed to predict the irradiance that will be detected at a given off-axis location due to atmospheric scattering of a high-energy laser. The HELEEOS system models the propagation of the laser through the atmosphere, accounting for such effects as turbulence, thermal blooming, and atmospheric absorption. The HELEEOS off-axis scattering algorithm uses the scattering phase functions of the Mie scattering models to predict the amount of radiation that will be scattered toward a particular observation location from each point along the beam path, and the total irradiance that will …

In-Situ, Gate Bias Dependent Study Of Neutron Irradiation Effects On Algan/Gan Hfets, Janusz K. Mikina

Theses and Dissertations

AlGaN/GaN Heterostructure Field Effect Transistors (HFETs) have come under increased study in recent years due to their highly desirable material and electrical properties and survivability even during and after exposure to extreme temperature and radiation environments. In this study, unpassivated and SiN passivated Al_0.27Ga_0.73N/GaN HFETs were subjected to neutron radiation at 120 K. The primary focus of the research was the effects of neutron irradiation on drain current, gate leakage current, threshold voltage shift, gate-channel capacitance, and the effects of biasing the gate during irradiation. In-situ measurements were conducted on transistor current, gate-channel capacitance, and gate …

The Material Properties Of Cssnbr3 And Csbr:Sn-1% And Their Potential As Scintillator Detector Material, Neal B. Kleinschmidt

Theses and Dissertations

The search for superior nuclear radiation detection materials is ongoing. Current scintillator materials using Thallium doped Sodium Iodide or Cesium Iodide are the benchmarks for ease of use and quick identification of isotope species. This research aims to explore Cesium Bromide doped with 1% molar tin (CsBr:Sn-1%) and Cesium Tin Bromide (CsSnBr₃) as candidate materials for a new scintillator. The techniques of Extended X-Ray Absorption Fine Structure (EXAFS), X-Ray Absorption Near Edge Structure (XANES) and Cathodoluminescence are used to determine the suit- ability of CsSnBr3 and CsBr:Sn-1% with Sn⁴⁺ as a potential scintillator materials and explore their …

Advanced Radiometry For High Discrimination Explosive Fireball Discrimination, Steven E. Slagle

Theses and Dissertations

The high explosive fireball phenomenological model for the mid wave infrared spectrum, developed by AFIT, performs classification from spectral signatures was modified to use radiometric intensities. Five bands were sequentially fit to derive the five physical fit parameters describing the fireball's temperature, size, soot absorption coefficient within 16% and emissions from the H₂O and CO₂ concentrations within 333% of the spectral model. This was improved by changing the model's band sizes, center, and fitting methods where all five fit parameters were matched to within 17% of spectral model. This demonstrated that a combination of radiometric intensities could …