Orthotics and Prosthetics Commons^™

A Systemic Review Of Functional Outcomes And Patient Satisfaction Across Lower-Limb Prosthetic Types In Military Personnel And Veterans, Emma Ho Harris, Amir Ghafarian, Sen Gao, Khaled Saleh, Jason Pasley

Medical Student Research Symposium

Background: Military personnel and veterans are at increased risk of lower-limb amputation, often due to combat-related trauma such as improvised explosive devices (IEDs), as well as secondary factors including tobacco use, peripheral artery disease, and diabetes. This study systematically reviews and compares lower-limb prosthetic technologies in military personnel and veterans, focusing on functional outcomes, mobility, and patient satisfaction.

Methods: A comprehensive literature search was conducted using PubMed MeSH terms to identify studies examining lower-limb prosthetic use and outcomes among military personnel and veterans. The final MeSH-based search yielded 27 results.

Results: The review included 27 studies on lower-limb prosthetic use …

Evaluation Of An Affordable Prosthetic Liner In Resource Limited Settings, Samerial Brown

Posters - 2026

The lower limb prosthesis is an important assistive technology for persons with limb amputations and differences. The interface (prosthetic liner) between the rigid prosthetic socket and the residual limb is often made of silicone, urethane or thermoplastic elastomer gel. This material provides cushioning and support as well as suspension for the transtibial (below knee) prosthetic leg. Unfortunately the cost of liners range from $3-$600. This cost precludes its use in resource limited settings such as Sri Lanka. As a result patients are fit with a foam liner which has less cushioning and suspension capabilities than a gel type liner. This …

Evaluation Of Prosthetic And Orthotic Technologies Using Ai Technology, Iris Reyna, Samerial Brown, Gary Guerra, Ed Khu

Posters - 2026

Individuals with lower limb prosthetics have amputations and abnormal limb motions, which poses a high risk of injury when doing everyday activities. In this field, evaluation of individuals' prosthetics are done through biomechanical analysis and gait analysis. This analysis is used to study human movement and evaluate the mobility and quality of life of amputee patients as well as determining the modifications, positioning, and alignment needed to ensure stability with prosthetic and orthotic technologies (Kumar & Bhowmik, 2024). Trunk flexion has importance to the study because of its impact on lower limb kinetics, kinematics, the increase of ground reaction forces, …

Occupational Therapy In Upper Limb Loss, Prosthetics, And Rehabilitation: A Video Training Series For Entry-Level Occupational Therapy Practitioners, Bailey M. Brown, Lesley Khan-Farooqi

Spring 2025 OTD Capstone Symposium

The purpose of this capstone project was to deepen my understanding of upper limb prosthetics, observe patient care, and identify gaps in occupational therapy education related to upper limb loss, prosthetic use, and rehabilitation. A key objective was to support the Hanger Clinic by increasing the number of completed Upper Limb Prosthetic User Outcome Forms, as well as to capture photos and videos—separate from this video training series—to contribute to Hanger’s educational library. Additionally, the project aimed to develop practical resources for both patients and clinicians navigating upper limb loss. Insights gained throughout this experience informed the creation of a …

Lower Limb Prosthetics Impact On Social Participation, Kayla Jones, Zeida Gutierrez

Fall 2024 OTD Capstone Symposium

Amputations can cause a lack of motivation which will hinder occupational performance and participation after limb loss (Şimsek et al., 2020). The fit of an individual’s prosthetic is crucial to allow for an increase in participation (Diment et al., 2022). Occupational therapists treat the limb loss community but there is little evidence in the literature to support social participation with the use of a prosthetic limb. There is a need for new research to better understand how the use of a prosthetic can impact an individual’s social participation.

Clinical Utility Of Opencap Motion Analysis In Lower Limb Prosthesis Users, Sarahi Fernandez Leon

Honors Program Theses and Research Projects

The use of prosthetics has gradually increased due to various diseases, and it is estimated that 35-40 million people are prosthetic/orthotic users, with the number estimated to increase to two billion by 2050. Mobility has been determined to be a strong predictor of quality of life. There are various ways to measure mobility and predict outcomes in lower-limb amputees (LLA), such as self-report and performance-based measures. However, these come with many limitations, showcasing the need for quantitative measures of gait parameters to allow for better development of prosthetic components. Motion analysis tools are expensive and time consuming, but an inexpensive, …

Evaluation Of 3d Printing Technologies And 3d Printed Materials In The Use Of Orthotic And Prosthetic Devices, Cory Larson

Master of Science in Kinesiology

Additive Manufacturing (AM) is disrupting fabrication techniques, bringing new design possibilities with associated benefits of less waste, improved design, improved time management, and less cost. The field of Orthotics and Prosthetics (O&P) is investigating how 3D printing, a subset of AM, can be used for fabrication of O&P devices. Before this technology is fully accepted, it needs to go through rigorous testing to ensure the safety of the individuals using the devices and the longevity of the devices themselves to ensure long term-use as a viable option. Research needs to define which type of 3D printing technology and what printed …

The Role Of Machine Learning In Improved Functionality Of Lower Limb Prostheses, Joaquin Dominguez, Richard Kim, Robert Slater

SMU Data Science Review

Lower-limb amputations can cause a plethora of obstacles that lead to a lower quality of life. Implementing machine learning techniques means advanced prosthetics can contribute to facilitating the lives of those that live with lower-limb amputations. Using the publicly available HuGaDB data set, the current study investigates several classification models (random forest, neural network, and Vowpal Wabbit) to predict the locomotive intentions of individuals using lower-limb prostheses. The results of this study show that the neural network model yielded the highest accuracy, comparable precision, and recall scores to the other models. However, the Vowpal Wabbit model's advantage in speed may …

Biomechanically-Consistent Skin Stretch As An Intuitive Mechanism For Sensory Feedback: A Preliminary Investigation In The Lower Limb, Jenny A. Kent

Physical Therapy Faculty Research

The proprioceptive loss accompanied by lower limb amputation can impair function and mobility. We explore a simple, mechanical skin-stretch array configured to generate superficial tissue behaviour that might occur with movement about an intact joint. Four adhesive pads attached around the circumference of the lower leg were connected via cords to a remote “foot” mounted on a ball joint attached to the underside of a fracture boot, such that “foot” reorientation would result in skin stretch. In two discrimination experiments performed with and without the connection, with no view of the mechanism, and with minimal training, unimpaired adults (i) estimated …

Advancing Prosthetic Design Using Neural And Mechanical Dynamics, Kacie E. Hanna

Graduate Theses, Dissertations, and Problem Reports (ETD)

Limb loss poses a significant challenge to mobility and the performance of daily activities. Currently, nearly half of the amputees using powered prosthetics abandon their device due to inadequate limb coordination and movement control abilities. In the healthy system, passive and neural dynamics facilitate the synchronized activation of muscles necessary for coordinated movement. However, in the amputee, the system is disrupted. The goal of this research is to use neural and mechanical dynamics to inform the design of prosthetic devices in order to restore intuitive control and coordinated limb movement.

The first aim of this research is to investigate neural …

Collapsible Prosthetic Shower Leg, Amanuel Matias, Mahsa Ebrahim

Honors Thesis

The purpose of this capstone project is to build a collapsible prosthetic shower leg that can provide a transtibial amputee with reliable support while showering. Phil Tamoush, an 83-year old transtibial amputee, was the inspiration for this work. Phil’s constant travel for his arbitration work leaves him without the option to bring along his usual shower leg due to the additional space it takes up in his travel bag. There are currently no commercially available prosthetic shower legs that can collapse into a condensed unit, so this capstone project explores an unexplored field for which there is a significant need. …

Walking Kinematics In Young Children With Limb Loss Using Early Versus Traditional Prosthetic Knee Prescription Protocols, Mark Daniel Geil, Zahra Safaeepour, Brian Giavedoni, Colleen Coulter

Faculty Articles

The traditional treatment protocol for young children with congenital or acquired amputations at or proximal to the knee prescribes a prosthesis without a working knee joint, based in part on the assumption that a child learning to walk cannot properly utilize a passively flexing prosthetic knee component. An alternative to this Traditional Knee (TK) protocol is an “Early Knee” (EK) protocol, which prescribes an articulating prosthetic knee in the child’s first prosthesis, during development of crawling and transitioning into and out of upright positions. To date, no study has compared samples of children with limb loss at or proximal to …

Improving 3d Printed Prosthetics With Sensors And Motors, Rachel Zarin

Honors Projects

A 3D printed hand and arm prosthetic was created from the idea of adding bionic elements while keeping the cost low. It was designed based on existing models, desired functions, and materials available. A tilt sensor keeps the hand level, two motors move the wrist in two different directions, a limit switch signals the fingers to open and close, and another motor helps open and close the fingers. All sensors and motors were built on a circuit board, programmed using an Arduino, and powered by a battery. Other supporting materials include metal brackets, screws, guitar strings, elastic bands, small clamps, …

Artful Bionics: Pushing The Limits Of Visual Expression In Prosthetic Design, Anna Kester

Honors Undergraduate Theses

Traditional prosthetic design revolves around functionality, aiming to hide and downplay an individual's limb difference as much as possible. This may not only negatively affect the user's desire to wear their prosthetic but may also negatively affect their self-confidence and sense of identity. Expression is a primary way to communicate identity, yet some traditional prosthetics may deny expression, leaving users without an immediate means to express themselves apart from the stigmatizing label of 'disability'. This study examines the ability of art when combined with bionic prosthetic technology to change the perception of disability, empower self confidence in prosthetics users, and …

The New World Of Pet Prosthetics, Anna Brooks

Capstones

When an abandoned dog was found in Brooklyn with his paw gnawed off, the animal shelter had two options: amputate the leg, or put the dog down. But neither seemed like a solution. So they decided to do something different, and fit the dog for a prosthetic leg. Prosthetics for people have been around for millennia, and now these devices are moving into the animal kingdom. This story explores the new world of animal prosthetics, and how these devices have changed the lives of animals like Mr. Stubbs — the first alligator with a prosthetic tail — and saved the …

The Impact Of Prosthetics On Amputee Quality Of Life, Courtney Tabor

Liberal Arts Capstones

After someone has a limb amputated, their lifestyle must be rearranged to accommodate for the loss of the limb. This can include adjusting to an inability to do tasks that used to come easily and a drastic reduction in mobility. They may now require assistance with caring for themselves. As a side effect, amputees often experience a significant level of depression and anxiety related to their situation. A selection of literature was analyzed for the physiological, psychological, and sociological effects of losing a limb, and then for the ways in which a prosthetic limb would alleviate some of these issues. …

The Advances In Prosthetics, Jose Garcia

Symposium Of University Research and Creative Expression (SOURCE)

Throughout time, many people have been able to build, create, and do amazing things with their arms and legs. However, those who have lost limbs at birth or through an event in their life sometimes have a harder time being as accomplished as others. While some people without limbs have had a harder life, some have been able to accomplish what others with a normal physiology can by the use of prosthetics. This presentation will focus on the advances of prosthetics, the benefits for the user, and their future development. The main focus will be on prosthetic arms and their …

Designing Electronics For An Artificial Leg, Taylor Barto

The Downtown Review: An Interdisciplinary Journal Written and Peer-Reviewed by Mandel Honors College Students at Cleveland State University

A regenerative prosthesis is modeled and simulated. The simulation is optimized with the biogeography-based optimization algorithm to obtain desired knee angle tracking with a reference knee trajectory and to regenerate energy. The prosthesis is able to track a reference knee angle with a 5.1 degree error averaged over an entire stride and regenerate some energy throughout the stride.

Its All In The Mind: Mind Controlled Prosthetics, Tziril Joselit

The Science Journal of the Lander College of Arts and Sciences

The problem with prosthetics is a longstanding problem that researchers have been working on for many years. They are attempting to create a prosthetic that acts as if it is the original limb or body part. In recent years they have discovered a technology that has assisted many of those who are greatly in need of a prosthetic, such as an amputee or someone who is “locked in”. “Locked in” refers to a person who is technically confined in his own body and has no methods of communication with the world. Brain-computer interface (BCI) has opened up a whole new …

Targeted Reinnervation, Yonatan Levi Moshayev

The Science Journal of the Lander College of Arts and Sciences

The following is an excerpt from the introduction of this paper: Imagine living a life where even the simplest of tasks such as eating a grape or holding an egg required intense concentration and months of training. Until recently, this was the harsh reality for people with upper limb prostheses. Currently, the most common upper limb prosthetic technology being used is body powered. These devices capture remaining shoulder movements with a harness and transfer this movement through a cable to operate the hand, wrist, or elbow. With this control method, only one joint can be operated at a time. When …

Three Dimensional Printing: Modern Medical Applications, Devin Peek, Elizabeth Stark

Graphic Communication

3-D printing is an additive printing process based on inkjet printing principles. Using this technology, a variety of materials can be used to create a three-dimensional product. Currently this technology is expensive, however it is slowly becoming more affordable. 3-D printing has the potential to change the future of medical model production and prototyping, due to the beneficial products it can produce. The objective of this research study is to discover the technological advancements in 3-D printing that could greatly affect several aspects of the medical industry. The areas discussed include high-risk surgery, dentistry, and prosthetics. After conducting six interviews …

Advanced Education & Research Training Initiative [Aerti] 2009, Mark Daniel Geil, John W. Michael

Faculty Articles

The American Academy of Orthotists and Prosthetists has long recognized the valuable synergy between research and education, and the mutual importance of each in advancing the field. Consequently, a focal point of an Academy grant initiative funded by the U.S. Department of Education has been a systematic analysis of research capacity and advanced education. A grant project in 2004 convened a series of meetings and produced the Advanced Education and Research Training Initiative (AERTI) report.

Continuing the initiative, a multidisciplinary and multinational group of experts convened in Chicago July 17-19, 2009 to review the 2004 AERTI Report, evaluate its recommendations …