Orthotics and Prosthetics Commons^™

Effects Of A Passive Assistive Hamstring Device On Overground Running Kinematics And Hamstring Activation., Quinn Castner

All Theses

Hamstring strain injuries are among the most common and recurring injuries in sports, occurring most often during the terminal swing phase of gait. Despite progress in rehabilitation, the incidence of injury has only increased, suggesting a need for a novel intervention. We designed a passive, assistive, wearable device with two specific criteria in mind: to offload the hamstrings during running, and do so without hindering normal kinematic patterns. The device consists of an adjustable elastic band anchored proximally at the waist and distally just above the ankle joint center. It stretches and shortens with the hamstrings, providing passive hip extension …

Modeling Structural Support To Facilitate Novel Treatments Of Degenerative Disc Disease, Jose Luis Calderon

Poster Presentations

Over 600 million people worldwide suffered from low back pain in 2020, with projections for 2050 being over 800 million [1]. Annual costs associated with low back pain total over 450 billion dollars in the US alone [2]. This research serves as a proof-of-concept for the use of structural supports to facilitate intervertebral disc healing. This treatment would involve the implementation of these supports along with existing injection treatments to promote regeneration. In both models, along with the combined model, the ability for these supports to alleviate intervertebral disc height loss is shown. This indicates that these supports would serve …

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

Evaluation Of An Affordable Prosthetic Liner In Resource Limited Settings, Samerial Brown

Posters - 2026

The lower limb prosthesis is an important assistive technology for persons with limb amputations and differences. The interface (prosthetic liner) between the rigid prosthetic socket and the residual limb is often made of silicone, urethane or thermoplastic elastomer gel. This material provides cushioning and support as well as suspension for the transtibial (below knee) prosthetic leg. Unfortunately the cost of liners range from $3-$600. This cost precludes its use in resource limited settings such as Sri Lanka. As a result patients are fit with a foam liner which has less cushioning and suspension capabilities than a gel type liner. This …

Analysis Of The Mechanical, Microstructural, And Biocompatibility Properties Of Novel Magnesium-Based Hybrid Nanocomposite Materials For Orthopedic Applications, Thomas H. Mcgehee

Biomedical Engineering Undergraduate Honors Theses

Bone fractures and complete joint replacements are becoming more common, primarily because of accidents and age-related issues. Conventional solutions to treat these orthopedic injuries involve inert metal alloys to correct bone fractures until the healing process is complete, where a secondary revision surgery is then required to remove the implant. Issues regularly associated with these solutions include stress shielding, bone resorption, infection, inflammation, and implant loosening. Magnesium (Mg)-based nanocomposites offer promising potential as an alternative to commonly used metal alloys because of their favorable mechanical properties and biocompatibility. A particularly advantageous property of Mg is its natural biodegradation in vivo, …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

Chemical And Polymer Characterization Of The Potential Modes Of Degradation Of An Injectable Nucleus Pulposus Replacement Device, Antonio G. Abbondandolo

Theses and Dissertations

HYDRAFIL™ is a poly(vinyl alcohol)/poly(ethylene glycol)-based hydrogel nucleus pulposus replacement device that is injected in situ and has demonstrated efficacy in lowering the prevalence and pain associated with back. In this work, we developed a method to analyze HYDRAFIL™ polymer composition using (TGA) and characterized intermolecular bonding interactions within the hydrogel through (FTIR). To function as a permanent implant for nucleus pulposus replacement, HYDRAFIL™ must be stable when exposed to a multitude of degradation pathways, namely, thermal, chemical, and mechanical. We subjected HYDRAFIL™ to accelerated thermal and chemical degradation pathways and described compositional, physical and chemical property changes using a …

Advancing Prosthetic Design Using Neural And Mechanical Dynamics, Kacie E. Hanna

Graduate Theses, Dissertations, and Problem Reports (ETD)

Limb loss poses a significant challenge to mobility and the performance of daily activities. Currently, nearly half of the amputees using powered prosthetics abandon their device due to inadequate limb coordination and movement control abilities. In the healthy system, passive and neural dynamics facilitate the synchronized activation of muscles necessary for coordinated movement. However, in the amputee, the system is disrupted. The goal of this research is to use neural and mechanical dynamics to inform the design of prosthetic devices in order to restore intuitive control and coordinated limb movement.

The first aim of this research is to investigate neural …

In The Pursuit Of Assistance: A Team's Desire To Not Let A Congenital Amputation Get In A Young Boy's Way, Carl Russell Iii, Gavin Loucks, Kirsten Wozniak

Purdue Journal of Service-Learning and International Engagement

EPICS is a service-learning design program run through Purdue University. It strives to teach students design skills through providing for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. BME (Biomedical Engineering) is a team within EPICS that strives to serve community partners through biomedical applications. William Sevick is an elementary school student with a congenital arm amputation. William and his family have been working with the BME team for the past three years designing assistive devices with the purpose of improving his actions in daily life such as eating, playing games, and riding his bike.

Comparison Of Machine Learning Models: Gesture Recognition Using A Multimodal Wrist Orthosis For Tetraplegics, Charlie Martin

The Journal of Purdue Undergraduate Research

Many tetraplegics must wear wrist braces to support paralyzed wrists and hands. However, current wrist orthoses have limited functionality to assist a person’s ability to perform typical activities of daily living other than a small pocket to hold utensils. To enhance the functionality of wrist orthoses, gesture recognition technology can be applied to control mechatronic tools attached to a novel fabricated wrist brace. Gesture recognition is a growing technology for providing touchless human-computer interaction that can be particularly useful for tetraplegics with limited upper-extremity mobility. In this study, three gesture recognition models were compared—two dynamic time-warping models and a hidden …

Walking Kinematics In Young Children With Limb Loss Using Early Versus Traditional Prosthetic Knee Prescription Protocols, Mark Daniel Geil, Zahra Safaeepour, Brian Giavedoni, Colleen Coulter

Faculty Articles

The traditional treatment protocol for young children with congenital or acquired amputations at or proximal to the knee prescribes a prosthesis without a working knee joint, based in part on the assumption that a child learning to walk cannot properly utilize a passively flexing prosthetic knee component. An alternative to this Traditional Knee (TK) protocol is an “Early Knee” (EK) protocol, which prescribes an articulating prosthetic knee in the child’s first prosthesis, during development of crawling and transitioning into and out of upright positions. To date, no study has compared samples of children with limb loss at or proximal to …

Improving 3d Printed Prosthetics With Sensors And Motors, Rachel Zarin

Honors Projects

A 3D printed hand and arm prosthetic was created from the idea of adding bionic elements while keeping the cost low. It was designed based on existing models, desired functions, and materials available. A tilt sensor keeps the hand level, two motors move the wrist in two different directions, a limit switch signals the fingers to open and close, and another motor helps open and close the fingers. All sensors and motors were built on a circuit board, programmed using an Arduino, and powered by a battery. Other supporting materials include metal brackets, screws, guitar strings, elastic bands, small clamps, …

(Poster) Design And Fabrication Of A Custom Wrist Orthosis For Enhanced Patient Comfort, Marko Tasic, Matthew Hansen, Mang Lian, Demetre Mitchell, Rashedul Sarker, Renny Fernandez, Erin Peterson, Joseph Herzog, David Olawale, Najmus Saqib

ASEE IL-IN Section Conference

This custom wrist orthosis project is the continuation of efforts made by students in the R.B Annis School of Engineering during the 2017-2018 academic year. Throughout this project, we have implemented the Design for Six Sigma (DFSS) methodology to guide the design process. Within the R.B. Annis School of Engineering, this methodology has been adapted into guide the DesignSpine process. We have designed a new orthosis that is custom fabricated for enhanced patient comfort. In the occupational therapy field, patients have reportedly not been wearing their prescribed orthoses/braces, which are designed to stabilize injured areas so that they heal properly. …

Developing And Testing Of An Upper Limb Exoskeleton For Stroke Patients, Drew Dudley, David Salazar

UNO Student Research and Creative Activity Fair

Objective: The main objective of this study was to determine functional and neuromuscular outcomes of stroke patients using their non-preferred hand with and without a 3D printed passive exoskeleton compared to controls using their non-preferred hand with and without the passive exoskeleton. Methods: Adults at least six months post stroke (Stroke, n = 5) and age- and sex- matched healthy controls (Control, n = 5) performed nine trials of a gross motor task while having their brain activity measured. The Fugl-Meyer and “Box and Block” test was used to measure the gross dexterity of the subjects with and without the …

Efficacy Of Assistive Devices Produced With Additive Manufacturing, James Pierce

UNO Student Research and Creative Activity Fair

Despite the frequency of musculoskeletal injuries such as sprains, broken bones and torn ligaments¹, treatment options are often costly, time-consuming and ill-fitted.^2,3 Additive manufacturing (“3D-printing) allows for the production of highly-customized and inexpensive assistive devices⁴, which suggests potential efficacy in the prescription of splints and casts for musculoskeletal injury.³ In the present study, a parametric, customizable splint/cast was created using a computer-aided design (CAD) package (Fusion 360, Autodesk, San Rafael, CA, USA) and produced with low-cost, desktop 3D printing (Ultimaker 2+ Extended, Ultimaker, Geldermalsen, Netherlands). Fitting of the devices was performed on five healthy …

Hard, Soft And Off-The-Shelf Foot Orthoses And Their Effect On The Angle Of The Medial Longitudinal Arch: A Biplane Fluoroscopy Study, Megan E.R. Balsdon, Colin E. Dombroski, Kristen Bushey, Thomas Jenkyn

Mechanical and Materials Engineering Publications

Background: Foot orthoses have proven to be effective for conservative management of various pathologies. Pathologies of the lower limb can be caused by abnormal biomechanics such as abnormal foot structure and alignment, leading to inadequate support. Objectives: To compare biomechanical effects of different foot orthoses on the medial longitudinal arch (MLA) during dynamic gait using skeletal kinematics. Study Design: Prospective, cross-sectional study design. Methods: The MLA angle was measured for 12 participants among three groups: pes planus, pes cavus and normal arch. Five conditions were compared: three orthotic devices (hard custom foot orthosis (CFO), soft CFO, and off-the-shelf Barefoot Science©), …

A Biomimetic Approach To Controlling Restorative Robotics, Matthew T. Boots

Graduate Theses, Dissertations, and Problem Reports (ETD)

Movement is the only way a person can interact with the world around them. When trauma to the neuromuscular systems disrupts the control of movement, quality of life suffers. To restore limb functionality, active robotic interventions and/or rehabilitation are required. Unfortunately, the primary obstacle in a person’s recovery is the limited robustness of the human-machine interfaces. Current systems rely on control approaches that rely on the person to learn how the system works instead of the system being more intuitive and working with the person naturally. My research goal is to design intuitive control mechanisms based on biological processes termed …

An Engineer’S Take On The Bone-Ligament Interface: Utilizing Novel Technology To Improve Clinical Outcomes, Emma Garcia

Shared Knowledge Conference

Ligament repair is a common surgical practice with a significant lack of viable replacements. The current gold standard for repair is the use of tendon grafts from cadavers or from another place in the patient’s body; however, these often cause more problems than they solve including immune responses or a lack of mobility in another place in the body. Synthetic replacements are of growing interest, though the ability to mimic the complex structure of the ligament and how it connects to the bone remains an obstacle. Our lab built a 3D bioprinter combined with an electrospinner to address this complicated …

3d Bioprinting And Near-Field Electrospinning Composite Scaffolds For The Bone-Ligament Interface, Emma Garcia, Christina Salas, Matthew N. Rush, Christopher Buksa, Marissa Perez, Ava Mauser, Steven Nery, Fermin Prieto, Darielys Morales

Shared Knowledge Conference

3D bioprinting is an additive manufacturing technique that can utilize a range of bioactive materials to construct specific architectures that mimic native tissue. Near-field electrospinning (NFE) offers precise alignment control to create non-woven mats with high tensile strengths. We built a custom E-spin printer that enables layer-by-layer alternating deposition between 3D bioprinting and NFE to create composite scaffolds for the bone-ligament interface. This complex region is difficult to simulate due to its functionally graded mechanical and biochemical properties. We created NFE poly(caprolactone) highly aligned micro-fibers which formed collagen fibril-like bundles. Poly(ethylene glycol) diacrylate with decellularized bone was encased in the …

Three Professions Come Together For An Interdisciplinary Approach To 3d Printing: Occupational Therapy, Biomedical Engineering, And Medical Librarianship, Joan Wagner, Laurel Scheinfeld, Blanche Leeman, Keith Pardini, Jamie Saragossi, Katie Flood

Library Faculty Publications

Background: Although many libraries have offered 3D printing as a service or available technology, there is a lack of information on course-integrated programs for 3D printing in which the library played a primary role. Therefore, librarians at the Touro College School of Health Sciences began exploring 3D printing for inclusion in the occupational and physical therapy curriculum. Case Presentation: The goal of this project was to educate occupational and physical therapy students and faculty about the potential applications of 3D printing in health care and provide hands-on experience, while increasing collaboration between librarians and faculty. Students’ tasks included designing and …

Integration Of A Sensory Driven Model For Hand Grasp Function In 3d Printed Prostheses, Austin T. Hetherington

Senior Theses

My Honors Thesis was completed through the Biomedical Engineering senior design project I worked on. Our project took a mechanically operated 3D printed prosthetic hand and automated the process by which it makes a grasp. The purpose of this project was to provide an affordable, automatic prosthetic hand to those either capable and incapable of wrist flexion. The current 3D printed prosthetic models require users to bend their wrist to initiate a simple grasp. However, our design took an alternative approach by using an EMG sensor placed on the ventral side of the forearm to record muscle activity, which, upon …

Design And Analysis Of A 3d-Printed, Thermoplastic Elastomer (Tpe) Spring Element For Use In Corrective Hand Orthotics, Kevin Thomas Richardson

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis proposes an algorithm that determine the geometry of 3D-printed, custom-designed spring element bands made of thermoplastic elastomer (TPE) for use in a wearable orthotic device to aid in the physical therapy of a human hand exhibiting spasticity after stroke. Each finger of the hand is modeled as a mechanical system consisting of a triple-rod pendulum with nonlinear stiffness at each joint and forces applied at the attachment point of each flexor muscle. The system is assumed quasi-static, which leads to a torque balance between the flexor tendons in the hand, joint stiffness and the design force applied to …

The Effects Of Emerging Technology On Healthcare And The Difficulties Of Integration, Skyler J. Pavlish-Carpenter

Honors Undergraduate Theses

Background: Disruptive technology describes technology that is significantly more advanced than previous iterations, such as: 3D printing, genetic manipulation, stem cell research, innovative surgical procedures, and computer-based charting software. These technologies often require extensive overhauls to implement into older systems and must overcome many difficult financial and societal complications before they can be widely used. In a field like healthcare that makes frequent advancements, these difficulties can mean that the technology will not be utilized to its full potential or implemented at all.

Objective: To determine the inhibiting factors that prevent disruptive technology from being implemented in conventional healthcare.

Methods: …

A New Technique To Improve The Operation Of Prosthetic Limbs During Muscle Fatigue, H. Albunashee, G. Rasool, K. Iqbal, G. White

Journal of the Arkansas Academy of Science

Prosthetic limbs hold a promise to renew the quality of life for the amputee. Neural commands are decoded via a classifier to generate control signals for the prosthetic devices. In the literature, many challenges and limitations have been identified that affect the prosthesis operation. One such drawback is muscle fatigue which degrades the surface electromyogram (sEMG) signals, and consequently, the performance of the deployed classification algorithm declines from 90% to 50% of average accuracy. We used a new technique using the Linear Discrimination Analysis (LDA) algorithm and the muscle synergy-based task discrimination (MSD) algorithm to improve the classification accuracy. In …

The Use Of A Pylon Mounted Transducer For Investigating The Gait Of Transtibial Amputees, Justin Robert Brink

UNLV Theses, Dissertations, Professional Papers, and Capstones

Two areas of research interest in the design and use of lower limb prosthetic devices are how foot performance varies with design and how prosthesis alignment affects gait. The current study addressed both of these areas through the use of the JR3 triaxial transducer mounted at the base of the socket. The transducer is an innovative form of instrumentation that measures forces and moments at the end of the socket. Traditional measurement of gait uses a force plate buried in the floor of a gait laboratory. The study established that the transducer offers a viable means of instrumentation for amputee …

Safety, Ergonomics And Human Factors Engineering On Biomedical Devices Design, Alejandra Sandoval Vazquez^, Noe Vargas Hernandez*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Development Of Software To Estimate Pressures On The Residual Limbs Of Amputees By Means Of A Pylon Mounted Transducer, Malli K. Yalamanchili

UNLV Theses, Dissertations, Professional Papers, and Capstones

The alignment of prosthesis has been recognized as one of the main factors that determine successful prosthetic outcomes for trans-tibial amputees. Alignment is defined as the relative position and orientation of the prosthetic components. Misalignment can result in changes in the position and orientation of the joints of the leg and moments experienced by them during gait, increases in energy use, and discomfort or even tissue breakdown at the socket/stump interface. Hence it is very important to align the prosthesis in correct manner. Gait analysis can be used to examine the effects of incorrect alignment of the prosthesis during gait. …

Energy Loss And Stiffness Properties Of Dynamic Elastic Response Prosthetic Feet, Mark Geil

Faculty Articles

No abstract provided.