Pharmacy and Pharmaceutical Sciences Commons^™

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Accelerating Wound Healing Rates With Cucurbita Pepo Leaf Extract Loaded Electrospun Poly(Methyl Methacrylate)/Halloysite/Chitosan/ Caco₃ Composite Nanofibers Through In Vitro And In Vivo Assessments, Samar A. Salim

Nanotechnology Research Centre

Cucurbita pepo leaf extract (CPE) was incorporated into electrospun poly(methyl methacrylate)/ halloysite/chitosan/ CaCO₃ (PMMA/Hal/CS/CaCO₃) composite nanofibers to develop a novel biomaterial for accelerating wound healing rates. The different nanofibrous scaffolds were successfully fabricated and characterized through scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). SEM analysis revealed uniform, smooth nanofibers, while FTIR and XRD confirmed the integration of CPE into nanofiber matrix, indicating an amorphous structure and effective dispersion of the extract. In vitro agar well-diffusion and antibiofilm assays revealed that the optimized formulation exhibited potent antimicrobial activity against wound-associated pathogens. The nanofibers composite based on …

Swosu Research And Scholarly Activity Fair 2026, Swosu Office Of Sponsored Programs

SWOSU Research and Scholarly Activity Fair Programs

On behalf of the University Research and Scholarly Activity Committee (URSAC) and the Office of Sponsored Programs (OSP) at Southwestern Oklahoma State University, we are pleased to welcome you to the Thirty-Fourth SWOSU Research and Scholarly Activity Fair.

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Molecular Survival Strategies Against Kidney Filtration: Implications For Therapeutic Protein Engineering, William Heaps, Anna Elise Packard, Kristina M. Mccammon, Tyler P. Green, Joseph P. Talley, Bradley C. Bundy, Dennis Della Corte

Faculty Publications

The glomerular filtration barrier poses a significant challenge for circulating proteins, with molecules below ~60–70 kDa facing rapid renal clearance. Endogenous proteins have evolved sophisticated evasion mechanisms including oligomerization, carrier binding, electrostatic repulsion, and FcRn-mediated recycling. Understanding these natural strategies provides blueprints for engineering therapeutic proteins with improved pharmacokinetics. This review examines how endogenous proteins resist filtration, evaluates their application in protein engineering, and discusses clinical translation including established technologies (PEGylation, Fc-fusion) and emerging strategies (albumin-binding domains, glycoengineering). We address critical challenges of balancing half-life extension with tissue penetration, biological activity, and immunogenicity—essential considerations for the rational design of next-generation …

Circulating Biomarker Results From A Phase 2 Study Of Seralutinib In Pulmonary Arterial Hypertension, Robin Osterhout, Athénaïs Boucly, Raymond L. Benza, Richard N. Channick, Kelly M. Chin, Robert P. Frantz, Anna R. Hemnes, Luke S. Howard, Vallerie V. Mclaughlin, Olivier Sitbon, Jean-Luc Vachiéry, Rotham T. Zamanian, Richard Aranda, Matt Cravets, Zhaoqing Ding, Thao Duong-Verlé, David Mattola, Robert F. Roscigno, Ravikumar Sitapara, Lawrence S. Zisman, Jean-Marie Bruey, Hossein-Ardeschir Ghofrani

Department of Medicine Faculty Publications

[Introduction] To the Editor: Pulmonary arterial hypertension (PAH) is a progressive disease characterized by obstructive pulmonary arterial remodeling (1). Seralutinib, an investigational inhaled tyrosine kinase inhibitor, potently and selectively targets kinases relevant to PAH pathobiology including platelet-derived growth factor receptors (PDGFR) α and β, colony stimulating factor 1 receptor (CSF1R), and mast/stem cell growth factor receptor kit (c-KIT) (2). In preclinical models, seralutinib improved cardiopulmonary hemodynamics, reversed pulmonary vascular pathology and decreased right ventricular hypertrophy (3). In TORREY, a phase 2, multicenter, double-blind, randomized, placebo-controlled trial in PAH, seralutinib significantly reduced pulmonary vascular resistance (PVR) after 24 weeks with good …

Formulation Development Of Topical Inserts Containing Doxycycline And Doxycycline Combined With Tenofovir Alafenamide And Elvitegravir For The Prevention Of Sexually Transmitted Infections, Vivek Agrahari, M. Melissa Peet, Jasmin Monpara, Rijo John, Sriramakamal Jonnalagadda, Pardeep K. Gupta, Meredith R. Clark, Gustavo F. Doncel

CONRAD Publications

Despite advances in oral and injectable HIV prevention options and oral prophylaxis for sexually transmitted infections (STIs) of bacterial origin, there remains a critical need for effective on-demand topical (vaginal and rectal) products for pre- and post-exposure prophylaxis (PrEP and PEP). To fill this gap, we have developed single and first-in-kind multi-active topical inserts for bacterial STIs and HIV/STIs prevention. We have formulated two different inserts, one containing doxycycline (DOX) at 10, 50, and 100 mg doses for bacterial STI prevention, and a multipurpose prevention product (TED insert) that combines DOX (10 mg) with the antiretrovirals tenofovir alafenamide (TAF; 20 …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Smart Dressings Accelerating Wound Healing With Tranexamic Acid-Infused Aligned Electrospun Nanofibers: In Vitro And In Vivo Assessments, Samar A. Salim, Abdullah Elbadry, Eman Gomaa, Mennatullah Faisal, Elbadawy A. Kamoun

Nanotechnology Research Centre

The development of advanced wound dressings capable of accelerating healing and achieving effective hemostasis remains a critical challenge in managing traumatic and surgical wounds. This study reports the fabrication and comprehensive evaluation of a novel multilayered, sandwich-structured nanofiber scaffold composed of Tranexamic acid (TXA), chitosan (CS), polyvinyl alcohol (PVA), L-arginine, and polylactic acid (PLA) for biodegradable wound dressing applications. Using sequential electrospinning, a four-layered scaffold was developed as a smart wound dressing, comprising an immediate-release TXA-CS-PVA layer for rapid clotting, a hydrophobic PLA barrier layer for protection, a sustained-release L-arginine-PVA layer to promote tissue regeneration, and a final PLA protective …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Acoustic Filter For Biopharmacy, Nicholas Rivet

Three Minute Thesis (3MT)

The design and development of a novel flow induced acoustically tuned “filterless” filter is proposed. The proposed research is on developing two or more prototypes that function as a cell retention device for perfusion cell cultures used in continuous manufacturing of monoclonal antibodies and recombinant proteins. This research will provide a non-invasive, cost-effective, flexible, and robust cell retention device for sustainable manufacturing of biologics.

Swosu Research And Scholarly Activity Fair 2025, Swosu Office Of Sponsored Programs

SWOSU Research and Scholarly Activity Fair Programs

On behalf of the members of the University Research and Scholarly Activity Committee (USRAC) and the Office of Sponsored Programs (OSP) at Southwestern Oklahoma State University (SWOSU) — welcome to the Thirty-Third SWOSU Research and Scholarly Activity Fair!

This year’s event features 99 poster presentations and 9 oral presentations, showcasing the work of over 170 student and faculty researchers, writers, presenters, artists, collaborators, and faculty sponsors. These presentations represent a wide array of scholarly and academic activity from across SWOSU’s academic community, including the Departments of Art, Communication, and Theatre; Allied Health Sciences; Biological Sciences; Business; Chemistry & …

The Effect Of Liquid Conductivity On A Helium Plasma Jet And The Hydrogen Peroxide Production, Edwin A. Oshin, M. Ziaur Rahman, Chunqi Jiang

Bioelectrics Publications

Understanding plasma-liquid interactions and the impact of the electrical conductivity (σ) of liquid on plasma is important for plasma applications in water treatment and medicine. Ultrapure water, phosphate-buffered saline (PBS) solution, biological media, and sodium chloride (NaCl) solutions at various concentrations were used in this study to provide a broad range of conductivity values ranging from 0.055 μS cm⁻¹ to 222 mS cm⁻¹. A helium atmospheric pressure plasma jet (APPJ) impinging on liquid was generated in ambient air using a hollow-needle electrode that was powered by 200 ns, 7 kV pulses at a pulse repetition frequency of …

Scaffolds With Spatiotemporally Controlled Growth Factor Delivery And Cyclodextrin-Enabled Antagonism Of Growth Factor Receptor Sequestration Promote Cutaneous Wound Healing, Jelena Marjanovic, Veronica Jurczuk, Lilian Valadares Tose, Yarixa Cintron Diaz, Francisco Fernandez Lima, Beatriz Abdo Abujamra, Sara Danker, Sinan Jabori, Devinder Singh, Jamie L. Burgess, Joshua Tam, Mohamadmahdi Samandari, Rivka C. Stone, Stephen C. Davis, Robert S. Kirsner, Marjana Tomic-Canic, Fotis M. Andreopoulos, Ivan Jozic

Mechanical & Aerospace Engineering Faculty Publications

Chronic wounds present a major burden to patients, health care professionals, and health care systems worldwide, yet treatment options remain limited and often ineffective. Although initially promising, growth factor-based therapies displayed limited and underwhelming effectiveness largely due to poor bioavailabilbioity and impaired receptor function within the chronic wound microenvironment. Here we demonstrate that chronic wounds exhibit elevated cholesterol synthesis, which disrupts growth factor signaling by sequestering receptors within lipid rafts. To address this, we developed a novel therapy combining growth factors with cyclodextrin in an ECM-mimetic scaffold, enabling localized cholesterol modulation and improved receptor accessibility. We demonstrate that this approach …

Burnout At University: Cross-Sectional Study Among Dental Students, Manal Elhijazi, Hajar Nafia, Ihsane Benyahya

Health Sciences

Context: The university constitutes a demanding and competitive learning environment which can impact the well-being of students. The objective of this survey is to assess the burnout of students at the faculty of dentistry.

Materials and methods: A cross-sectional study was conducted via an anonymous questionnaire with 3 sections: socio-demographic data, lifestyle and habit, and burnout through the Maslach burnout inventory-student survey (MBI-SS) . Continuous variables were presented as means and standard deviations,categorical variables as numbers and percentages. The variables were tested in univariate analysis to assess predictive factors related to burnout using the Khi-2 test. The significance level was …

Laser-Induced Graphene Sensor For The Electrochemical Detection Of Acetaminophen, Abdellatif Ait Lahcen, Mazhar Sher, Sikander Ameer, Gymama Slaughter

Center for Bioelectronics Publications

Here we present a simple and efficient method for fabricating laser-induced graphene (LIG) electrodes for the electrochemical detection of acetaminophen (AAP), a crucial analgesic and antipyretic that can become toxic at elevated concentrations. Unlike conventional sensors that require intricate chemical modifications, the fabricated LIG-based sensor eliminates the need for functionalization, offering a streamlined sensing solution. The LIG electrodes were characterized using scanning electron microscopy, energy-dispersive spectroscopy, and Raman spectroscopy, which confirmed the formation of a highly porous graphene network with excellent purity and conductivity. Cyclic voltammetry analysis with a ferricyanide redox probe revealed a large electroactive surface area of 1.21 …

Novel Micro-And Nanoformulations Of Paclitaxel For Targeting Metastatic Breast, Non-Small Cell Lung, And Pancreatic Cancers, Lobat Tayebi, Mehran Alavi

Electrical & Computer Engineering Faculty Publications

Nonlinear pharmacokinetics resulting from high lipophilic and low oral bioavailability, and hypersensitivity reactions and hyperlipidemia caused by formulation by Cremophor EL have limited clinical effectiveness of paclitaxel (Taxol). In this way, there is the critical necessity of innovative drug delivery systems (DDSs) to mitigate severe side effects and overcome clinical limitations of paclitaxel. In recent years, various micro- and nanoformulations, specifically polymeric nanoparticles (NPs) and lipid NPs, have been presented and approved by the Food and Drug Administration (FDA). In addition, other nanoformulations, such as polymeric nanoparticles (NPs), micelles, liposomes, and mesoporous silica nanoparticles, have shown promising results in vitro …

Flipped Classroom Versus Lecture: A Quasi-Experimental Study Evaluating The Performance Of Dental Students.”, Manal Elhijazi, Ihsane Benyahya

Health Sciences

Background: The flipped classroom is an active pedagogical modality that improves learning, autonomy and critical thinking. This work aims to evaluate the impact of the flipped classroom on student performance compared to the lecture in a biomaterials course.

Material and methods:Second-year dental students were invited to participate voluntarily in this quasi-experimental study .Thus, they were divided into two groups: one group benefited́ from the flipped classroom while the control group attended the lecture. At the end of a formative evaluation for both groups, their average grades were compared using Student's test (significance threshold set at p

Results : …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …