Orthodontics and Orthodontology Commons^™

The Effect Of Orthodontic Treatment On Sagittal Root Position Of The Maxillary Central Incisor, Jeremy Haines

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Sagittal root position (SRP) of maxillary incisors is an important factor in implant treatment planning. Kan et al defined four classes of SRP in an effort to aid implant placement treatment planning and these SRP classifications represent a novel approach to describing bone changes around the maxillary incisors. The effect of orthodontic tooth movement, specifically changes in inclination, on SRP is of interest in potentially facilitating immediate implant placement. Purpose: The purpose of this study was to use Cone Beam Computed Tomography (CBCT) to evaluate the adaptation of alveolar bone around the maxillary incisors as a result of orthodontic …

Ricketts Analysis Using Conventional And Dolphintm Generated Cbct Lateral Cephs, Yeganeh Parhizkar Jewell

Loma Linda University Electronic Theses, Dissertations & Projects

Purpose: The aim of this study was to evaluate the difference between Ricketts analysis measurements made on Sirona Orthophos XG Plus (Sirona Dental Systems, Charlotte,NC) lateral cephalograms, and DolphinTM generated perspective and orthogonal lateral cephalograms from CBCT (NewTom 5G; QR srl, Verona, Italy). Materials and Methods: A Sirona digital lateral cephalogram and DophinTM synthesized CBCT lateral cephalograms of a radiographic phantom in orthogonal and perspective projections were created. Horizontal and vertical measurements were made in multiple planes on the radiographic phantom to compare each imaging modality. Twenty-five lateral cephalometric radiographs were selected retrospectively from the records of patients of …

Tooth Size Ratio In Orthodontic Patients With Varied Sagittal Skeletal Patterns; A Cbct Study, James Barra

Loma Linda University Electronic Theses, Dissertations & Projects

Objective: Maxillomandibular tooth size ratio (TSR) is an important aspect in achieving a satisfactory orthodontic outcome. The purpose of this study is to compare TSR among orthodontically treated patients with different skeletal anteroposterior (AP) patterns. Methods and Materials: The post-treatment (T2) cone beam computed tomograms (CBCTs) of patients treated orthodontically without extraction and finished with canine and molar class I occlusion were evaluated. The subjects were categorized into class I, class II and class III skeletal pattern by analyzing A point-Nasion-B point (ANB) at T2. Overbite (OB), overjet (OJ), TSR for canine to canine (TSR3-3) and molar to molar (TSR6-6), …

The Effect Of Scan Settings On The Identification Of Tooth Socket Lamina Dura Surface: A Cbct Study, Erick Carlucci

Loma Linda University Electronic Theses, Dissertations & Projects

Aim: Cone-beam computed tomography (CBCT) is becoming a common adjunct in orthodontic diagnosis and treatment, however several questions remain about the impact of surrounding anatomical structures and varying scan settings on the ability to delineate buccal bone and overall diagnostic quality of images produced. The aim of this study was to determine if adjacent structures with similar radiodensity and variable scan settings (field of view and voxel size) significantly impact the ability to accurately identify the tooth socket facial lamina dura, facial bone surface, facial bone margin, as well as the facial bone thickness measurement. Materials & Methods: CBCT scans …

Tooth Length Measurements On 3t Mr Images: A Retrospective Study, Kevin G. Murray

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The purpose of this study was to determine if MRI can be used to accurately measure tooth lengths. Methods: MRI tooth length measurements were compared with “actual tooth lengths” as measured on CBCT scans. Twenty three subjects received two scans (one CBCT and one MRI). Tooth length was measured and compared between the resultant images. Intraclass correlations were used for statistical analysis. Results: Tooth length measurements made on MRI scans showed moderate to almost perfect agreement with tooth length measurements made on CBCT scans. Higher levels of agreement were present in the maxillary arch compared to the mandibular arch. …

Treatment Outcomes Of Patients With Unilateral Class Ii Malocclusions: A Cbct Study, Brent Leggett

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The purposes of this study were to determine the prevalence of Class II (Cl II) subdivision patients, to quantify the change in TMJ complex, and mandibular length after treatment was accomplished. Materials and Methods: Records of consecutive patients who sought orthodontic treatment at Loma Linda University (LLU) were screened. Only patients with dental Cl II subdivision that had completed treatment with pre- (T1) and post-treatment (T2) cone beam computed tomograms (CBCTs) available were evaluated for changes in the TMJ complex position related to Foramen Rotundum (TMJ-FR), joint spaces and mandibular length (condylion to genial tubercles). Comparisons were made between …

Morphological Changes In Alveolar Bone Following Orthodontic Space Closure, Ninette Hacopian

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Changes occurring in anterior alveolar bone following orthodontic tooth movement are controversial. Some research has shown that orthodontic tooth movement results in the adaptation of cortical bone; others have shown that it results in dehiscence and fenestrations.

Purpose: The purpose of this study was to evaluate the alveolar bone changes around maxillary anterior teeth following orthodontic space closure.

Materials and Methods: Cone beam computed tomograms (CBCTs) of non-growing patients who received orthodontic treatment with bilateral maxillary premolar extraction were evaluated. Only patients with at least 5 degrees of changes in maxillary incisor (U1) to palatal plane angle were included …

Prevalence And Rationale Of Orthodontic Extractions At Loma Linda University, Teresa T. Tran

Loma Linda University Electronic Theses, Dissertations & Projects

Aim: The purpose of this study was to determine the prevalence of orthodontic extraction cases and the rationale for the decision-making. Materials & Methods: The records of consecutive patients who had completed orthodontic treatment at Graduate Orthodontic Clinic, Loma Linda University School of Dentistry, between January 2010 and December 2014 were reviewed for prevalence of orthodontic extractions. Cone beam computed tomograms (CBCTs) of patients, that had extraction(s) prescribed as part of orthodontic treatment, were analyzed dentally and skeletally. Patients were then categorized according to the degree of crowding in each dental arch. A one-way ANOVA (Kruskal-Wallis) test and …

Skeletal Changes After Rapid Maxillary Expansion And Fixed Orthodontic Treatment: A Cbct Study, Chandler Ho

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The purpose of this study was to use cone-beam computed tomography to quantitatively evaluate the skeletal effects of rapid maxillary expansion and orthodontic treatment, with a specific interest in evaluating whether the skeletal changes achieved by RME will maintain throughout orthodontic treatment. Methods: Thirty consecutive patients (16 boys, 14 girls; mean age, 13.9 ± 1.8 years) who required RME with Hyrax appliances as part of their comprehensive orthodontic treatment were studied. Measurements before and after RME, and after orthodontic treatment, of palatal and buccal maxillary widths, palatal alveolar angle, nasal width, nasal floor width, and maxillary sinus width at …

Copper, Aluminum And Nickel: A New Monocrystalline Orthodontic Alloy, Mark Wierenga

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: This study was designed to evaluate, via tensile and bend testing, the mechanical properties of a newly-developed monocrystalline orthodontic archwire comprised of a blend of copper, aluminum, and nickel (CuAlNi). Methods: The sample was comprised of three shape memory alloys; CuAlNi, copper nickel titanium (CuNiTi), and nickel titanium (NiTi); from various orthodontic manufacturers in both 0.018” round and 0.019” x 0.025” rectangular dimensions. Additional data was gathered for similarly sized stainless steel and beta-titanium archwires as a point of reference for drawing conclusions about the relative properties of the archwires. Measurements of loading and unloading forces were recorded in …

The Effect Of Tooth Presence On Identification Of Tooth Socket Lamina Dura Surface: A Cbct Study, Morse Stonecypher

Loma Linda University Electronic Theses, Dissertations & Projects

Aim: The accuracy in identifying anatomical landmarks on CBCT images can be affected by the presence of surrounding anatomical structures with similar radiodensity. The purpose of this study was to evaluate the effect of the presence of tooth structure on the accuracy in identifying the lamina dura surface, facial bone surface, facial and lingual bone margins, socket apex, as well as in facial bone thickness measurement. Materials & Methods: Three fresh cadaver heads were scanned using a NewTom 5G CBCT at 0.100 mm voxel size at three time-points: before extraction (T1), after extraction and reinsertion (T2), and after tooth removal …

Cbct Evaluation Of Morphological Changes To Alveolar Bone Due To Orthodontic Tooth Movement, Jeremy M. Hoff

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The mandibular process is the anatomic factor that limits the orthodontic movement of the mandibular incisors, and awareness of this structural limitation may reduce the risk of potential damage to tooth roots and alveolar bone. A decision regarding the correct placement of the lower incisors will be largely determined by the amount of adaptation possible within the alveolar bone. Purpose: The purpose of this study was to use Cone Beam Computed Tomography (CBCT) to evaluate the adaptation of alveolar bone around the mandibular anterior teeth before and after orthodontic tooth movement. Methods: This study compared changes in area (mm2) …

Cbct And Cephalometric Analysis Of The Tmj Complex After Treatment Using A Mara Appliance, Melissa Danette Shotell

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The mandibular anterior repositioning appliance (MARATM) is a fixed appliance intended for the correction of class II malocclusion. Many advocate the use of the MARA appliance to minimize patient non-compliance with treatment; however, little information is known as to the skeletal changes in the temporomandibular complex. The purpose of this study is to investigate the changes in the temporomandibular complex using both cephalometric and cone beam computerized tomography.

Materials and Methods: The initial and final treatment cone beam computerized tomography (CBCT) scans of 5 patients treated with the MARA appliance were collected from the Loma Linda University Orthodontics Clinic. …

Efficacy Of The Flosspro Flosser Versus Finger Flossing In Orthodontic Patients, Sharareh S. Sabet

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The maintenance of good oral hygiene among orthodontic patients is a challenge. The purpose of this study was to compare the oral hygiene habits, gingival health, and preference of orthodontic patients when using a floss aid compared to conventional finger flossing with a floss threader. Methods: Thirty-four adolescent and young adult patients with fixed orthodontic appliances and poor oral hygiene were enrolled from the Loma Linda University Graduate Orthodontic Clinic. This was a single blind crossover study. The patients were randomly assigned to one of two treatment groups (floss aid or finger floss) in phase I. After prophylaxis, subjects …

Correlating Vomer With Ceph Vectors In High And Low Mandibular Plane Angle Cases, Christopher James Wood

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Growth of the maxilla and mandible follow identifiable vectors of facial growth such as the Rickett’s Facial Axis (FA) and the Down’s Y-axis (YA). The purpose of this study was to evaluate the correlation between the anterior inferior vomer axis (AIVA) and posterior inferior vomer axis (PIVA) with the FA and YA in cases with high (32 degrees and above) and low (20 degrees and below) mandibular plane angles.

Methods: Pretreatment cone beam computed tomography (CBCT) scans of 94 patients treated at the Loma Linda University Graduate Orthodontic Clinic meeting the inclusion criteria were used in this …

Effect Of Attending Doctor Changes On Orthodontic Treatment Times And Results, Emily Caskey Peppers

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The objective of this study was to determine if there was any significant difference in treatment time or results due to varying levels of attending doctor coverage in the Loma Linda University (LLU) graduate orthodontics clinic. Methods and Materials: The main study group of 191 subjects was split into high, medium and low coverage groups by primary attending doctor coverage and then by original attending doctor coverage. Treatment times, treatment results, and other variables were evaluated for each of the groups. Treatment results were evaluated using UK Peer Assessment Rating (PAR) scores. A second study group (289 subjects) included …

Comparison Between Ceph Analysis On Lateral Cephs, Cbct Scans, And Mri Scans, Jeffrey W. Lam

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Most current methods of obtaining images for orthodontic diagnosis and treatment planning involve the use of ionizing radiation. Given that patients often need records taken several times during treatment, an alternative should be found that does not involve ionizing radiation. Magnetic resonance imaging (MRI) exists as a possible alternative. Purpose: The purpose of this study is to compare cephalometric measurements obtained from lateral cephs, cone beam computed tomography (CBCT) scans, and MR scans. Methods: Lateral cephs, CBCTs, and MRIs were taken on 22 patients. 3 separate readers traced the images and the data was analyzed using Bland-Altman plots. Results: …

Comparison Of Digital And Cbct Synthesized Lateral Cephalograms, Da Lee

Loma Linda University Electronic Theses, Dissertations & Projects

Purpose: The purpose of this study was to compare the precision of lateral cephalometric Ricketts analysis measurements from NewTom 5G CBCT (NewTom) synthesized lateral cephalograms with Sirona Orthophos XG Plus (Sirona) digital lateral cephalograms. Materials & Methods: A Sirona digital lateral cephalogram and a NewTom synthesized lateral cephalogram of a phantom in the orthogonal and perspective projections were created. Metal washers in each plane of the phantom were measured in the vertical and horizontal dimensions and compared across the different imaging modalities. In Group 1, forty patients were randomly selected from the Loma Linda University Graduate Orthodontic Clinic who had …

Periodontal Health Of Anterior Teeth With Two Types Of Fixed Retainers, Andrew I. Corbett

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Fixed retainers for anterior teeth have become a popular method for maintaining the position and function of teeth after orthodontic treatment. Various retainer designs, wire sizes and types have been used over the years. One problem with fixed retainers is that they complicate oral hygiene and therefore might negatively affect the periodontal tissues if left in place for long periods of time. Purpose: The purpose of this study is to compare the periodontal health of maxillary and mandibular anterior teeth retained with two different types of fixed retainers. Methods: Male and female subjects who had been in continuous orthodontic …

Photos And Silhouettes In Evaluating The Need For Bsso Surgery In Adult Females, Jessicah L. Moretz

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The objective of this study was to determine the anterior/posterior position of the mandible at which an orthodontist and oral surgeon would advise bilateral sagittal split osteotomy advancement or set back when evaluating adult female photos and silhouettes. Material & Methods: Fifty-one adult female profile photos and lateral cephalograms were collected. Subjects were selected who met three criteria: 1) ANB of 0-2, 2) balanced profile image, and 3) age greater than 18. The image and cephalometric tracing were morphed together to allow software simulation of mandibular prognathia and retrognathia in 2 mm increments. Orthodontists and oral surgeons evaluated morphed …

Effectiveness Of Resin Infiltration And Mi Paste Cpp-Acp In Masking White Spot Lesions, Melissa Wu Bailey

Loma Linda University Electronic Theses, Dissertations & Projects

The development of decalcification around orthodontic brackets and bands, commonly called white spot lesions (WSLs), is often observed in patients with poor oral hygiene during treatment (Behnan et al., 2010, Rodgers et al., 2010). In many instances, these WSLs continue to be visible after the removal of fixed appliances and after natural remineralization. The purpose of this in vitro study was to compare the effectiveness of two treatment modalities, resin infiltration (RI) and Casein Phosphopeptide Amorphous Calcium Phosphate (CPP-ACP), at improving the light reflectivity and thus the appearance of WSLs using spectrophotometric analysis. Sixty extracted human third molars were partially …

Accuracy Of Ortho Insight 3d Digital Scanner In Mesial-Distal Tooth Measurements, Andrew A. Ferris

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Digital scanners and software may be used to measure mesial-distal (MD) tooth width for orthodontic diagnosis and treatment planning. Although there have been many studies performed on different digital scanners, accuracy of mesial-distal tooth measurements using the Ortho Insight 3D scanner and its software (Motionview Software LLC) has not been reported. Purpose: The objective of this study was to determine if the MD tooth measurements from the digital models scanned by Ortho Insight 3D are accurate compared to the measurements taken directly from the teeth and models with a digital caliper. Material and Methods: Individual MD tooth measurements were …

Dental And Buccal Bone Stability After Rapid Maxillary Expansion And Fixed Orthodontic Treatment, Allison Milliner

Loma Linda University Electronic Theses, Dissertations & Projects

The objective of this study was to quantitatively evaluate, via CBCT, the dental and osseous effects of patients who had completed comprehensive orthodontic treatment with rapid maxillary expansion (RME) in conjunction with Ricketts prescription brackets. Thirty consecutive patients (16 males, 14 females; mean age = 13.9  1.9 years) who required RME as part of their orthodontic treatment and had pre-RME (T1), post-RME (T2) and final orthodontic (T3) CBCT images were included in the study. Thirteen patients had 2-banded, while 17 had 4-banded appliances. Measurements of interdental distance (ID), interdental angle (IA), buccal bone thickness (BBT) and buccal marginal bone …

Evaluation Of Apical, Coronal And Occlusal Form Diffrences With Conventional Orthodontic Treatment, Tamar Sardarian

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Cone-beam computed tomography (CBCT) can be used to accurately identify dental landmarks in order to detect changes in dental arch forms. Purpose: The objective of this study was to determine how apical, coronal and occlusal arch forms change following orthodontic treatment with fixed appliances and to establish a base for future studies. Material and Methods: Maxillary and mandibular apical, coronal and occlusal landmarks of 27 subjects were selected on their respective CBCT images at two time points: pre-orthodontic treatment (T1) and post-orthodontic treatment (T2). Comparisons were made between the two time points to evaluate how each arch form changed …

Mechanical Evaluation Of Mandibular Defects Restored With Rhbmp-2: A Finite Element Model, Jelson Yalung

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The utilization of recombinant human Bone Morphogenetic Protein-2 (rh- BMP2) to form new bone has been shown to be a promising alternative to autogenous bone grafts. Understanding the biomechanical properties of rhBMP-2 restored mandibular defects would provide useful knowledge in the future success of orthopedic and dental treatment in patients who have had restoration of mandibular defects with rhBMP-2. The aim of the study was to evaluate and compare the biomechanical characteristics of rhBMP-2 regenerated bone in mandibular defects using 2 different concentrations of rhBMP-2 with a given carrier in non-human primates Material and Methods: Critical-sized defects (approximately 2.5 …

Influence Of Outdoor Air Quality On Maxillofacial Growth And Development, Ryan Rudd

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Mild to moderate deviations from normal facial types can significantly change orthodontic treatment modalities. Studies linking ambient air pollution with respiratory problems, as well as craniofacial morphology with respiratory problems are well established.1-19 In this study we aimed to determine if there was a correlation between ambient air pollution and maxillofacial growth and development. We also wanted to determine if further research should be done in this area, and if so how can the study be improved. Materials and Methods: We selected Santa Maria, CA and Upland, CA as sample areas due to their significant differences in air quality. …

Profile Attractiveness In Borderline Class Iii Surgical/Orthodontic Cases, Melina Adamian

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: This study evaluated differences between laypersons and orthodontists in rating facial attractiveness in borderline class III surgical/orthodontic cases. The purpose was to determine whether orthognathic surgery or camouflage is a better alternative for observable esthetic improvement in borderline Class III surgical/orthodontic patients. This study will aid the orthodontist in recommending treatment options to enhance profile attractiveness of borderline Class III surgical/orthodontic patients. Materials and Methods: Thirty profile images of treated borderline class III surgical/orthodontic cases were selected. Fifteen of the profile images were of cases that had been treated by orthodontics alone, and fifteen images were of cases that …

Cone-Beam Computed Tomography And Orthodontics: Awareness Assessment, Warren D. Libby

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The purpose of this study was to evaluate a specific orthodontic community's knowledge and understanding of Cone-Beam Computed Tomography (CBCT) technology as well as awareness of the implications of CBCT use, including risk assessment, radiation dose estimation, diagnostic utility, and issues of informed consent. It is incumbent on the profession to understand how practitioners view this technology as it gains popularity and ease of use. Materials and Methods: A 21-question survey with 13 additional demographic questions was distributed to several different populations affiliated with Loma Linda University School of Dentistry: 1) undergraduate dental students, 2) students in specialty programs …

Sleeping Tongue Posture And Its Relationship To Craniofacial Morphology, Brent J. Tingey

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: There exists good consensus in the literature supporting the notion that resting tongue posture is an important factor in dental arch development and maintenance as well as airway control. What has yet to be quantitatively measured is the duration of time that a subconscious, resting tongue posture is maintained and whether such posture differs among various craniofacial morphologies. Quantifiable measurements might allow for prediction of tongue-posture-related problems specific to certain facial types. Purpose: The objective of this study was to record sleeping tongue posture over time in 27 subjects and to compare findings with craniofacial morphology determined by cephalometric …

Accuracy Of Unsegmented Cbct In Mesial-Distal Tooth Measurements, Todd Wesslen

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Cone-beam computed tomography (CBCT) scans may be used to measure mesial-distal (MD) tooth width for orthodontic diagnosis and treatment planning. Purpose: The objective of this study was to determine if MD tooth measurements from unsegemented CBCT scans in the axial, sagittal, and coronal planes or from a panoramic reconstruction correlate and agree with respective measurements made on study models. Material and Methods: Using stone models of 30 subjects, reference MD tooth measurements were made using digital calipers. From CBCT scans, five different methods of measuring MD width were used and compared to the reference: (1) points chosen from orthogonal …