Dental Materials Commons^™

The Use Of Tissue Grafts Associated With Immediate Implant Placement To Achieve Better Peri-Implant Stability And Efficacy: A Systematic Review And Meta-Analysis, Enrico Maria Rondone, Bruno Leitão-Almeida, Miguel Silva Pereira, Gustavo Fernandes, Tiago Borges

MOSDOH Faculty Publications

Background: The goal of this systematic study and meta-analysis was to evaluate the efficacy of hard and/or soft tissue grafts associated with type-1 implants on healing and treatment outcomes. The primary outcomes studied were implant survival rate, pocket depth, marginal periimplant recession, bone loss, bone thickness (volumetric change), interproximal bone level, mesial and distal papilla migration, and radiographic evaluation; and the secondary parameters were Pink Esthetic Score (PES), vertical distance from implant shoulder and bone, Visual Analogue Score (VAS), Implant Stability Quotient (ISQ), and biological complications (fistulas, pain, mucositis, and peri-implantitis). Methods: The PICO strategy was used to formulate the …

Fibroblasts And Osteoblasts Behavior After Contact With Different Titanium Surfaces Used As Implant Abutment: An In Vitro Experimental Study, Jose Henrique Cavalcanti De Lima, Patricia Cristina Matos Robbs, Elena Mavropoulos Oliveira Tude, Piedad N. De Aza, Eleani Maria Da Costa, Antonio Scarano, Juan Carlos Prados-Frutos, Gustavo Fernandes, Sergio Alexandre Gehrke

MOSDOH Faculty Publications

Background: The goal of this in vitro study was to compare three different surfaces: two types of implant surfaces commercially available ([a] smooth/machined and [b] acid-treated surface) versus (c) anodized surface. Discs were manufactured with commercially pure titanium (CP) grade IV, which were subsequently analyzed by scanning microscopy and fibroblastic and osteoblastic cell cultures. Methods: Ninety-nine discs (5 × 2 mm) were manufactured in titanium grade IV and received different surface treatments: (i) Mach group: machined; (ii) AA group: double acid etch; and (iii) AN group: anodizing treatment. Three discs from each group were analyzed by Scanning Electron Microscopy (SEM) …

Build Angle Effect On 3d-Printed Dental Crowns Marginal Fit Using Digital Light- Processing And Stereo-Lithography Technology: An In Vitro Study, Omar Elsergany

Dentistry

Background The effect of 3D printing technology and build angle on the marginal fit of printed crowns is unclear. The objective of this research was to use digital light processing (DLP) and stereo-lithography (SLA)-based 3D printing to construct single restorations with varied build angles and to analyze the crowns′ marginal fit.

Methods A prepared resin first molar was scanned utilizing an optical scanner. Three build orientations were used to construct the specimens: 0, 45, and 90o. DLP and SLA technology were used to produce the casting patterns. A digital microscope was used to measure the marginal gaps. The effect of …

Minimally Invasive Periodontal Regeneration With The Buccal Approach: A Systematic Review And Meta-Analysis Of Clinical Studies, Elisa Pasqualini, Filipe Castro, Denise Curado, Ana Martelete, Artak Heboyan, Muhammad H. Saleh, Juliana Campos Hasse Fernandes, Gustavo Fernandes

MOSDOH Faculty Publications

OBJECTIVE: The aim of this study was to investigate clinical periodontal parameters after treatment using the Minimally Invasive Surgical Technique (MIST), Modified Minimally Invasive Surgical Technique (M-MIST), and/or any technique for papilla preservation, such as Entire Papilla Preservation (EPP), modified-papilla preservation technique (M-PPT), or simplified-papilla preservation technique (SPPT). METHODS: The focus question was “For patients with periodontal intrabony defects (P), what is the best minimally invasive regenerative approach (I), comparing MIST, M-MIST, and papilla preservation techniques’ outcomes (C) to improve PD, CAL, GR, and periodontal stability (O)?” An online search was conducted on PubMed, Cochrane Library, and Embase. Only randomized …

Is The Facial Bone Wall Critical To Achieving Esthetic Outcomes In Immediate Implant Placement With Immediate Restoration? A Systematic Review, Sergio Charifker Ribeiro Martins, Marcio Da Costa Marques, Michael Gomes Vidal, Pedro Henrique Moreira Paulo Tolentino, Roberto Galvão Dinelli, Gustavo Fernandes, Jamil Awad Shibli

MOSDOH Faculty Publications

Background. Rehabilitation in the anterior region requires specific conditions for success, such as the presence of papilla, emergence profile, and balance between pink and white esthetic. Objectives. This systematic review aimed to evaluate the esthetic risk associated with immediate implant placement with immediate restoration in the anterior superior area, where the facial bone plate may be absent or deficient. Materials and methods. The search was done in PubMed, Embase, Cochrane, Lilacs, Scopus, Scielo, and Google Scholar databases. The investigation involved clinical studies and observational studies published between January 2012 and July 2023. Studies were excluded if there was less than …

Critical-Size Defects Reconstruction With Four Different Bone Grafts Associated With E-Ptfe Membrane: A Histomorphometric Experimental In Vivo Study, Gustavo Fernandes, Filipe Castro, Rafael Martins Pereira, Wendel Teixeira, Sergio Gehrke, Julio Cesar Joly, Juan Blanco Carrion, Juliana Campos Hasse Fernandes

MOSDOH Faculty Publications

Objectives: The goal of this study was to assess the newly formed bone and the remnant biomaterial by comparing four different bone grafts used to treat critical-size defects, associated or not with the non-resorbable membrane.

Materials and methods: Two calvaria critical-size bone defects were created in 50 male Wistar rats. They were divided into blood (G1), autogenous (G2), bioglass (G3), hydroxyapatite (G4), and xenograft (G5) groups, associated or not with e-PTFE. The experimental periods were 15 and 45 days. Sections were prepared for histomorphometric assessment. All data were analyzed by the mixed-effects model with multiple comparisons (significance level, p < .05).

Results: …

Effect Of Different Implant Materials On Stresses Transmitted To Peri-Implant Areas Of Implant-Retained Mandibular Overdenture, Diaa Mohamed Zahran Future University In Egypt, [email protected], Aya Fawzy Associate Professor Of Prosthodontics, Future University In Egypt, [email protected], Salah Hegazy Professor Of Prosthodontics, Faculty Of Dentistry, Mansoura University, [email protected], Sara M. Shabaan Lecturer At Removable Prosthodontic Department, Faculty Of Oral And Dental Medicine , Badr University, Cairo, Egypt, Ahmed A.Elwahed Shaaban Associate Professor Of Prosthodontics, Future University In Egypt, [email protected]

Future Dental Journal

Aim this in vitro study was conducted to evaluate the effect of mechanical loading on different implant materials on supporting structures materials and methods: a total of three implant retained overdentures were used in this study, retained by two implants each (Titanium, polyetheretherketon and zirconia) were placed in epoxy resin casts at the canine area using a surgical guide. Soft liner material was used at the distal extension area to mimic the soft tissues. Two linear strain gauges were bonded buccal and lingual to each implant to measure the peri-implant strains during unilateral and bilateral loading. Results: during bilateral loading …

Effect Of Scan Body Design On The Accuracy Of The Implant Position In Implant Supported Prosthesis, Ahmed Safwat Elghazally ,Future University In Egypt, [email protected], Bassem Mohsen Associate Professor Of Prosthodontics, Future University In Egypt, [email protected], Amr Hosny Professor Of Prosthodontics, Faculty Of Dentistry – Cairo University In Egypt, [email protected], Hussien G. Elcharkawi Professor Of Prosthodontics, Future University In Egypt, [email protected]

Future Dental Journal

Background: Several treatment options are planned for completely edentulous patients rehabilitation which were developed to meet patients desires and requirements, starting from conventional complete denture till implant supported fixed full arch cases. Each technique has its own indication and limitations. Passive fit is an important factor for the long-term success of implant- prosthesis, which necessitate accurate transfer of the implant position. Recently, digital impressions have been introduced in dental implant treatment. By the use of scan body and different optical scanning methods, the position of scan bodies can be transferred to a virtual implant position within the dental arch. Material …

Implant Overdenture Abutment Loosening Under Hyperbaric Conditions, Zana Jamal Al-Saloum

Graduate Theses, Dissertations, and Problem Reports (ETD)

Objectives: To investigate the effect of various hyperbaric air pressures on the loosening of LOCATOR® (ZEST Anchors, LLC, Escondido, CA USA) overdenture abutments.

The pressure conditions tested are meant to simulate scuba diving conditions in edentulous patients that are restored with implant-retained tissue-supported overdentures. Another sub-goal of this study is to determine whether or not there is a difference in LOCATOR® loosening when the sample is exposed to six cycles/dives as opposed to one cycle/dive.

Methods: 36 ZimVie Tapered Screw Vent Implants with a 3.5mm diameter implant platform, and a 2.5mm diameter (and 1.5mm deep) internal hexagon were …

Testing The Strength Of Thin Feather-Edge Monolithic Multilayered Zirconia Crowns: A Pilot Study With A Novel Acoustic Test, Estelle Saab, Camille Haddad, Maher Abboud, Maha Daou, Amine Zoghbi

International Arab Journal of Dentistry

Introduction: Limited research has explored the mechanical characteristics of recently introduced multilayered monolithic zirconia (MZC) crowns with feather-edge margins design. Moreover, most of the conventional techniques for evaluating the mechanical behavior of brittle dental ceramics rely on destructive tests, making it impossible to precisely evaluate real strength values due to premature crack initiation detection failure.

Objectives: The main objective of the study was to assess the load capacity of translucent multilayered monolithic zirconia crowns with feather-edge margin thicknesses of 0.4 mm and 0.5 mm. Additionally, the research introduced a novel non-destructive acoustic emission testing (AET) technique in the …

Investigation Of Fracture Resistance With Different Diameters Of Polyetherketoneketone Post And Core Materials: A Pilot Study, Maya Kabbara, Ryan Harouny, Habib Rahme

International Arab Journal of Dentistry

Objectives: The primary objective of this study is to investigate the resistance to fracture of Polyetherketoneketones PEKK, used as post and core by fabrication in different diameters in the canal, and comparing the test results for each group.

Methods: Thirty extracted mandibular premolars were selected, endodontically treated and prepared to receive the post and cores milled from polyetherketoneketone disk. The specimens were randomly divided into five groups (n = 6) respectively: group 1 received pekk post with diameter = 0.70 mm, group 2 received pekk post with diameter = 0.90 mm, group 3 received pekk post with diameter …

Clinical Outcomes Of Primary Anterior Esthetic Crowns In Pediatric Dentistry, Jenan Alahmad

Theses and Dissertations

Clinical Outcomes of Primary Anterior Esthetic Crowns in Pediatric Dentistry - A Prospective Cohort Study

By: Jenan Alahmad, BDS

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University.

Virginia Commonwealth University, 2024

Thesis Advisor: Parthasarathy Madurantakam, DDS, MDS, PhD

Department of Pediatric Dentistry

BODY

Purpose: This prospective cohort study aimed to compare the effectiveness of restoring maxillary anterior teeth in children (aged 3-6 years) with three different materials: Zirconia Crowns (ZC), Resin Composite Crowns (RC), and Pre-veneered Stainless-Steel Crowns (PVSSC). The study aims to assess the Oral …

Shore A Hardness And Fourier Transform Infrared Spectrophotometer Analysis Of Thymol-Modified Maxillofacial Silicone Material, Manar Hussein Ramadhan, Faiza M. Abdul-Ameer

Maaen Journal for Medical Sciences

The longevity of any prosthesis depends on the materials from which it was fabricated, which is why defects in the material properties may reduce the service life of the prosthesis and necessitate its replacement. This study aims to test the influence of incorporating different weight percentages of thymol micro-powder into the maxillofacial silicone matrix on Shore A hardness of the silicone. Room-temperature vulcanised VST-50 maxillofacial silicone was used to prepare the study specimens. Thymol micro-powder was incorporated into the silicone matrix in two percentages (0.75 wt.% and 1 wt.%). 30 specimens were prepared and then subdivided equally into three groups, …

Fabrication And Characterization Of Nylon 6 Fiber Via Wet Spinning Method For Application As A Reinforcing Material For A Direct Dental Bridge, Dissa Kirana Wijaya, Nina Djustiana, Yanwar Faza, Arief Cahyanto, Andri Hardiansyah

Makara Journal of Science

Nylon is a biocompatible thermoplastic polymer that is well known for its excellent fracture resistance, making it suitable for fabricating fiber-reinforced composite (FRC)-based dental bridges. FRC is widely used in dentistry. This study aimed to investigate the structural and morphological characteristics of the nylon 6 fiber prepared using five different weights of nylon 6 dissolved in formic acid. The nylon 6 fiber was successfully fabricated via a simple wet spinning method using water as a coagulant. The fiber was then characterized using Fourier transform infrared (FTIR) spectroscopy, optical microscopy, and scanning electron microscopy. FTIR spectroscopy confirmed the presence of nylon …

Bond Strength Of Reline Materials To 3d-Printed Provisional Crown Resins, Jorge Palavicini, Sherrod L. Quin, Wael Zakkour, Karim Zakkour, Safa Manafi Varkiani, Xiaoming Xu, Nathaniel C. Lawson, Amir Hossein Nejat

School of Dentistry Faculty Publications

(1) Purpose: The aim of the present study was to compare the bond strength between two 3D-printed resins designed for long-term provisional crowns and three different reline materials. (2) Materials and Methods: Rectangular specimens were prepared from two 3D-printed resins (Envision Tech and NextDent C&B) and a conventional self-cure PMMA. Transparent tubes filled with three different reline materials including composite resin, Bis-acryl, and PMMA were bonded to the 3D-printed specimens (n = 11 per group, total of 6 study groups). Tubes filled with PMMA were bonded to the prepared PMMA specimens which served as the control group (n = 11, …

Comparison Of Two Different Intraoral Scanners For Determination Of Caries Related Volume Loss In Caries Removal, Merve Şeker, Elif Alkan, Dilek Tağtekin, Bora Korkut, Funda Yanıkoğlu

Journal of Dentistry Indonesia

Objective: The study aimed to compare cavity volume data obtained with two different intraoral scanners. Methods: One hundred extracted molar teeth were divided into groups according to ICDAS-II classification, and scanned with Cerec Omnicam (Dentsply Sirona) and iTero Element Flex (Align Technology). The caries-infected tissues were removed regarding either minimally invasive or conventional cavity principles. Samples were scanned again and volumetric data were assessed by Meshmixer 3.5 (Autodesk) 3D modeling software. Statistical evaluations were performed with Mann Whitney U test and Spearman’s Correlation test. The significance level was α=0.05. Results: Although there was a significant difference between obtained …

The Effects Of Boric Acid On The Water Solubility Of Glass Ionomer Cements, Banu Cukurluoz Bayındır, İrem Bağ

Journal of Dentistry Indonesia

Changing the water solubility property of glass ionomer cement (GIC), which is frequently used in pediatric dentistry, is the starting point of this study. Objective: To evaluate the effects of boric acid on the water solubility (WS) of GIC. Methods: The samples were prepared as n=12 in each of four groups: GIC-Conventional glass ionomer cement; BGIC with 1:3 boric acid added to conventional GIC powder; RMGIC-resin-modified glass ionomer cement; BRMGIC with 1:3 boric acid added to RMGIC powder. Weight changes were compared 1, 3 and 24 h after keeping in distilled water. One sample in each group was …

Computer Guided Versus Conventional Maxillary Sinus Augmentation Using Allogenic Bone Blocks With Simultaneous Implant Placement In Severely Pneumatized Sinuses, Hisham G. Zulhemma Department Of Oral And Maxillofacial Surgery, Future University In Egypt, Egypt. [email protected], Waleed Ragab El-Beialy Professor Of Oral And Maxillofacial Surgery -Cairo University, Egypt. [email protected], Ahmed Abd Elsamad Associate Professor Of Oral And Maxillofacial Radiology– Cairo University, Egypt. [email protected], Ahmed Abozekry Lecturer Of Oral And Maxillofacial Surgery –Future University In Egypt, Egypt. [email protected]

Future Dental Journal

Background: Maxillary sinus lifting is a complex procedure with reported complications in the literature where the presence of sinus septa further complicates the procedure, they including membrane perforation, bleeding. Aim: The aim of this study is to decrease the incidence of membrane perforation which is the most common reported complication, and to determine whether the use of surgical guides could decrease the incidence of membrane perforation. Materials and methods: A total of 12 cases where blindly divided into 2 groups; Group (A) computer guided maxillary sinus lifting and Group (B) conventional sinus lifting, both groups received allogenic bone blocks for …

Acceptability Of Fully Guided Virtual Implant Planning Software Among Dental Undergraduate Students, Shishir Ram Shetty, Colin Murray, Sausan Al Kawas, Sara Jaser, Wael Talaat, Medhini Madi, Vinayak Kamath, Nisha Manila, Raghavendra Shetty, Vidya Ajila

School of Dentistry Faculty Publications

Background: Fully guided implant surgery as a technique is gaining popularity. It has been observed that use of surgical guides improves precision and predictability for dental implant placement. However, like any other newer technology, the acceptance of fully guided dental implant technology among users is based upon its perceived usability. This study aimed at evaluating the perception about using Virtual Implant Planning Software (VIPS) among undergraduate dental students at the university of Sharjah. Methods: Ninety-Six dental surgery students from the University of Sharjah were included in the study. One week after the Virtual Implant Planning Software (Planmeca Romexis version 6.2 …

Distal Cantilever Length Comparison In Esthetic Materials For Hybrid Implant Prostheses: An In Vitro Study, Sana Shams Eddin, Elie Jasser, Mohammad Chams Eddin, Carole Abi Ghosn Yared, Joseph Makzoumi, Paul Boulos

International Arab Journal of Dentistry

Objective: the assessment of distal cantilever length in implant supported prothesis (Hybrid prosthesis) by comparing the load to fracture in two different esthetic framework materials (Zirconia and Polyetheretherketone (PEEK)) with two different cantilevers loading distances (10mm, 15mm).

Material and methods: 20 frameworks were fabricated and divided into 4 groups (n=5): according to the material type, Peek, zirconia, and according to the cantilever loading distance (10), or (15) mm and a load-to-fracture test was used until complete fracture of specimens occurs.

Results: The effect of material type and cantilever loading distance were statistically significant for the mean load-to-fracture …

Enhanced Periodontal Ligament Stem Cell Viability And Osteogenic Differentiation On Two Implant Materials: An Experimental In Vitro Study, Sara Fikry, Shereen Nader Dr, Engy Farag Dr

Dentistry

Background: Surface roughness of dental implants impacts the survival of adult periodontal stem cells and rate of differentiation. This research was conducted to test how human periodontal ligament stem cells behaved on yttria stabilized tetragonal zirconia polycrystals and polyetheretherketone (PEEK) discs with different surface topographies. Methods: Discs roughening was prepared by sandblasting. Stem cells were cultivated on zirconia discs with a polished surface, PEEK discs with a polished surface, sandblasted zirconia discs and sandblasted PEEK discs. Cells viability was assessed after 24, 48, 72 hours. Scanning electron microscopy was used to examine the adherence and attachment of cells. Osteoblastic differentiation …

Evaluation Of Color Difference And Translucency Of Modified Peek Restorations Veneered With Different Veneering Materials Before And After Thermal Cycling, Mohamed Hamdy Abdulmaguied, Tarek Salah Morsi, Mennatallah M. Wahba, Hesham Katamish

Future Dental Journal

Objective: The aim of this study was to investigate the effect of different PEEK veneering materials, as well as thermocycling on the color difference (ΔE) and the translucency parameter (TP) of modified PEEK veneered restorations.

Materials and Methods: Thirty disc shaped specimens of veneered BioHPP (1.5 mm X 12 mm) were randomly divided into three groups (n=10) based on the type of the veneering material. Group (A): Discs veneered with CAD milled Lithium Disilicate, group (B): Discs veneered with pre-cured milled composite, and group (C): Discs veneered with conventional light cured composite. CIELab values were calculated for all specimens over …

Enhanced Human Periodontal Ligament Stem Cell Viability And Osteogenic Differentiation On Two Implant Materials: An Experimental In Vitro Study, Engy Adel Ahmed Farag, Sara Fikry Dr, Shereen N. Raafat

Dentistry

Background: Surface roughness of dental implants impacts the survival of adult periodontal stem cells and rate of differentiation. This research was conducted to test how human periodontal ligament stem cells behaved on yttria stabilized tetragonal zirconia polycrystals and polyetheretherketone (PEEK) discs with different surface topographies.

Methods: Discs roughening was prepared by sandblasting. Stem cells were cultivated on zirconia discs with a polished surface, polyetheretherketone (PEEK) discs with a polished surface, sandblasted zirconia discs and sandblasted polyetheretherketone (PEEK) discs. Cells viability was assessed after 24, 48, 72 hours. Scanning electron microscopy was used to examine the adherence and attachment of cells. …

Effect Of Overlay Material Type And Design On Fracture Resistance Of Mod Cavities In Molars. (In-Vitro Study), Sara Adel Botros, Mohamed Fouad Haridy, Shaimaa Gad

Dentistry

Objective: To evaluate the influence of restoration material type (CAD/CAM lithium disilicate blocks and reinforced composite blocks) and restoration design on fracture resistance of molars with MOD cavities. Methods and Materials: A total of 54 sound human molars were divided into 2 groups (n=9) according to: 1) material type: lithium disilicate CAD/CAM blocks and reinforced composite CAD/CAM blocks; 2) restoration design: overlay with intra-coronal extension or without intra-coronal extension. Additional 18 samples were assigned to positive control group (sound molars, n=9) and negative control group (unrestored MOD cavities, n=9). Standardized MOD cavities were prepared with occlusal width 3 mm, cavity …

Influence Of The Margin Design On The Fracture Resistance Of Implant Supported Monolithic Zirconia Crowns: An In Vitro Study, Camille Haddad, Ryan Harouny, Karim Corbani, Lara Nasr, Ronn Tassidis

International Arab Journal of Dentistry

Introduction: The purpose of this in vitro study was to test the influence of the margin design of implant supported monolithic zirconia crowns and test if monolithic zirconia crowns with extra fine finish line thickness cemented on zirconia implant abutments can bare the maximum masticatory forces on molars and hence be used in the posterior region.

Methods: Fourteen identical monolithic zirconia crowns cemented on zirconia implant abutments mounted on titanium bases and fixed on implant replicas embedded in PMMA resin were divided into two groups: group I designed with a 0.5 mm CFL (CFL) and group II with …

Rehabilitation Of A Patient With Single Complete Tooth-Supported Overdenture Against The Unmodified Natural Dentition Using Functionally Generated Path Technique: A Case Report, Akanksha Shinde, Nilesh Bulbule, Varun Bhatt, Gayathri Balachandran, Amit Jagtap

International Arab Journal of Dentistry

Meyer’s proposed chew-in technique also called functionally generated path (FGP) technique, is indicated for the restoration of an edentulous arch that is opposed by natural teeth as it does seem to provide the most accurate method of recording occlusal patterns, also help to minimize the effects of negative factors, and to overcome the deficiencies of articulators. As stated by Rudd and Morrow, this technique is especially suitable for tooth-supported complete dentures, due to inherent stability of tooth-supported record bases helps in recording jaw relationships accurately. Whenever a single complete denture is opposed by natural dentition, problems observed are abrasion of …

Effect Of Different Surface Treatments And Application Times On Shear Bond Strength Between Polyetheretherketone And Composite Resin, Alper Ozdogan, Basak Topdagi

Journal of Dentistry Indonesia

Objective: To investigate the effect of various surface treatments and different application times on shear bond strength between polyetheretherketone and composite resin. Methods: A total of 110 disc-shaped polyetheretherketone specimens were randomly divided into 9 groups and 4 different surface treatments (control, sandblasting, tribochemical silica coating, sulfuric acid) were applied. The sandblasting, tribochemical silica coating, and sulfuric acid processes were performed 3 different times (10s, 15s, 20s). Then, the composite resins were applied to the treated surfaces of the polyetheretherketone specimens. The shear bond strength test and scanning electron microscopy analysis were performed. The data were statistically analyzed using …

Effect Of Different Polishing Systems On Surface Roughness And Color Stability Of Lithium Disilicate Ceramics, Mahmoud Al Ankily, Fatma Makkeyah

Dentistry

Objective: This study aimed to investigate the effect of two polishing systems on the surface roughness and color stability of lithium disilicate ceramic. Materials and Methods: Forty disc-shaped lithium disilicate samples were constructed and cemented into a cavity prepared onto the labial surface of freshly extracted bovine teeth; The samples were divided into four groups (10 samples per group); C: Control, SS: Scaling only, SE: Scaling followed by polishing using Eve Diapro lithium disilicate polishers, SD: Scaling followed by polishing using Diatech ShapeGuard ceramic polishing plus kit. The surface roughness was measured before scaling, after scaling and finally after the …

Fractal Analysis Of Subchondral Cyst At Mandibular Condyle Detected On Panoramic Radiograph In A Group Of Thai Population, Aloysius Putut Wijanarko, Preeyaporn Srimawong, Suchaya Pornprasertsuk-Damrongsri, Apirum Janhom

Journal of Dentistry Indonesia

Objectives: This study aimed to analyze subchondral cyst on the mandibular condyle using fractal dimension (FD) measurement on a panoramic radiograph. Methods: This retrospective study examined 15 patients aged 24 to 75 years who had undergone panoramic radiography and cone-beam computed tomography on both sides of the mandibular condyles, between January 2013 and November 2017, in the Oral and Maxillofacial Radiology Clinic, Dental Hospital, Mahidol University. These 15 patients, all of whom had a subchondral cyst on one side of the mandibular condyle, constituted both the study and control groups: the 15 affected sides constituted the study group, …

The Effect Of Silver Diamine Fluoride On Bond Strength Of Three Types Of Bulk-Fill Restorative Materials To Dentin., Nasrin Danaeifar, Amir Hossein Nejat, Zafar Cehreli, Richard W. Ballard, Jeffrey T. Johnson

School of Dentistry Faculty Publications

No abstract provided.