Dentistry Commons^™

Endodontic Management Of Mandibular First Molar With Four Roots - A Rare Case Report With Clinical Management Guidelines, Shaikh Shahbaz, Huma Iftekhar, Sharique Alam, Zehra Shavez

Journal of Dentistry Indonesia

Mandibular molar is usually two rooted with one mesial and one distal root. Additional roots are rare which requires accurate diagnosis and a methodical and scrupulous endodontic treatment. Objective: This paper aims to report the endodontic management of an unusual case of a mandibular permanent first molar with four roots (two mesial & two distal) and provide a clinical guideline to detect and manage these variant cases. Case report: A 15-year-old boy reported with a deep carious lesion in the lower left first molar (#36). The apical root contour of #36 on an intraoral periapical radiograph taken in different angulations …

A Comparison Of Four Different Methods Of Prediction Of Mesiodistal Widths Of Unerupted Permanent Canines And Premolars, Waqar Jeelani, Washma Asad, Maheen Ahmed

Journal of Dentistry Indonesia

The success of orthodontic treatment depends upon the accurate assessment of mesiodistal widths of unerupted canines and premolars in mixed dentition stage. There are several methods available for mixed dentition analysis with dubious reliability in our population. Objective: To statistically develop new prediction equations for Pakistani subjects to predict the widths of unerupted upper canines and premolars (U345) and lower canine and premolars (L345) using mesiodistal widths of lower incisors (I1I2) and lower incisors and first molars (I1I2M1) and compare their performance with previously established methods of Moyers and Tanaka-Johnston. Methods: Study was conducted using the data from the dental …

Salivary Iga Depression In Drug-Influenced Gingival Enlargement Among Hypertensive Patients, Muhammad Annurdin Sabarudin, Haslina Taib, Wan Majdiah Wan Mohamad, Siti Lailatul Akmar Zainuddin, Wan Syamimee Wan Ghazali, Ahmad Azhar Misran

Journal of Dentistry Indonesia

Drug-influenced gingival enlargement (DIGE) among hypertensive patients is commonly associated with antihypertensive drugs such as calcium channel blockers (CCBs). Immune response alteration is one of the proposed mechanisms for DIGE. Immunoglobulin A (IgA) in saliva which involves in defense mechanism was shown to be affected in patients with DIGE. Objective: This study aimed to determine the association of salivary IgA level with DIGE. Methods: This cross-sectional study comprised 47 hypertensive patients who had consumed antihypertensive drugs for at least 3 months. Twenty-one (44.7%) males and 26 (55.3%) females had participated in this study. Data was analyzed using SPSS version 26.0. …

Simulating Implant Procedures In Dentistry, Brandon Patterson

Frameless

The School of Dentistry in partnership with the health sciences library at the University of Utah developed VR simulations for dental implants. The benefits of using the technology included providing endless scenarios, evaluation measures, and experiential learning experiences for students [1]. The school administration found that the simulations kept pace with the requirements of regulatory authorities, helped reduce costs in dental education, and found that students who trained in VR scored significantly better than traditional methods largely due to their ability to repeat tasks and receive instant feedback [2, 3].

Comparing The Efficacy Of Sodium Fluoride And Silver Diamine Fluoride In Arresting Caries Through Statistical Analysis, Elana Ferris

Annual Research Symposium

No abstract provided.

Effect Of Thickness On Translucency And Masking Ability Of A Recently Developed Single-Shade Resin Composite With Enhanced Opacity: An In Vitro Comparative Study, Sayed Mohamed Ghorab, Hagag Abd Elkader Atya

Future Dental Journal

ABSTRACT

Objective: This study aimed to evaluate the effects of thickness changes on translucency and masking ability of a recently developed single shade resin composite material with enhanced opacity comparing it with a traditional opaque-shade one.

Material and methods: Two brands of composite resins; Omnichroma blocker (OCB) and G-aenial Anterior (GA) in opaque A2 (OA2) shade were selected to enroll the study. Color coordinates of each composite were determined at 0.5, 1, and 1.5 mm thicknesses (n=10/thickness) on four different backgrounds (white baking, black baking, C4 shade porcelain baking and the backing of material itself) by using a …

Influence Of Etching Methods On The Shear Bond Strength Of A Universal Adhesive System To Sound And Artificial Caries-Affected Dentin, Omnia M. Sami, Essam A. Naguib, Rasha H. Afifi, Shaymaa M. Nagi

Future Dental Journal

Abstract:

This study tested the effect of different etching methods on the bond strength of a universal adhesive system to caries-affected (CAD)and sound dentin. Methods: forty premolars were wet grinded to expose flat occlusal midcoronal dentin. Specimens were equally divided according to the substrate; sound and (CAD) by exposing to pH-cycling for 14 days. Each dentin substrate was bonded with Single Bond^TM universal adhesive applied either after no etching or etching of dentin, then resin composite was built up. Specimens were tested for shear bond strength (SBS). The data was analyzed by two-ways ANOVA. Results: Single Bond^TM universal …

Evaluation Of Strength Of Different Resin Materials Used In Overdenture, Mohamed Emam, Hesham E. Alam El Deen, Hamdy Abu El Fotoh, Ayman Fateen

Future Dental Journal

Introduction: Finding a suitable material that could be used to restore relatively small inter-arch spaces in which reasonable aesthetics as well as good functional strength could be achieved is a difficult process that requires good understanding of the clinical situation and precise management. Historically Metal used to offer the smallest possible thickness with excellent strength but lacks resiliency with poor aesthetics.

Aim of the study: This In-vitro study was conducted to compare two different aesthetic materials PEEK and ACETAL regarding their mechanical strength when used as Overdenture framework in a relatively small thickness.

Material and Methods: 120 specimens were …

Evaluation Of Incorporating Bracing Arm In Precision Attachment Unilateral Removable Partial Denture, Hussein El Charkawi, Aya Fawzy, Mohamed M. Dohiem

Future Dental Journal

ABSTRACT

Purpose: This Randomized Control Trial study aimed to compare between two designs of Precision Attachment Unilateral Removable Partial Denture, one conventional design and the other modified with bracing arm and mesial rest.

Materials and Methods: twenty male patients having Kennedy Class II mandibular edentulous ridges received the two designs in a split mouth study for a follow-up period of eighteen months. Probing Pocket Depth around abutment was measured. A standardized radiographic technique was used to evaluate bone height changes.

Results: The results showed insignificant pocket depth and bone height changes in the two groups.

Conclusion: Precision Attachment Unilateral Removable …

The Effect Of Thickness And Accelerated Aging On Opalescence Of Different Ceramic Materials, Omar Hussein Abdelbary, Marwa Mohamed Wahsh, Ashraf Hussein Sherif, Tarek Salah Morsi

Future Dental Journal

Purpose: The objective of the study was to evaluate the effect of ceramic material type and thickness on opalescence before and after accelerated aging. Materials and methods: 180 all-ceramic slices were divided into three groups (n=60) according to the ceramic material (InCoris TZI, Empress CAD HT, and Empress CAD LT). Each group was further subdivided into four subgroups (n = 15) according to their thickness (0.5 mm, 0.8 mm, 1 mm and 1.2 mm).). CIE Lab coordinates were measured for each slice against black and white backgrounds using intraoral spectrophotometer and OP was calculated. All specimens were subjected to …

Knowledge And Awareness Regarding Uses Of Extracted Natural Tooth In Clinical Practice, Momina Anis Motiwala, Shizrah Jamal, Karshma Devi, Rabia Ghafoor

Section of Dental-Oral Maxillofacial Surgery

Restoration of aesthetics is one the major patients’ concern in dentistry which may be disrupted due to tooth-loss secondary to trauma, or as part of orthodontic treatment or periodontal problem. A number of treatment options are available for the replacement of teeth, but they may be expensive, and time-consuming, involving artificial teeth. For immediate tooth replacement, patient’s own intentionally extracted or unintentionally avulsed tooth maybe used. The current narrative review was planned to discuss various techniques for the use of natural tooth pontic, which preserves the original contours, size and colour of the replaced tooth. Before using these teeth in …

Radiographic Evaluation Of The Margins Of Clinically Acceptable Metal-Ceramic Crowns, Sheikh Bilal Badar, Kamil Zafar, Rabia Ghafoor, Farhan Raza Khan

Section of Dental-Oral Maxillofacial Surgery

Objective: To radiographically evaluate the proximal marginal fit of the clinically acceptable metal-ceramic crowns.
Methods: The prospective study was conducted at the dental clinics of Aga Khan University, Karachi, from July to December 2018, and comprised metal-ceramic crowns that were evaluated prior to the cementation. Clinical examinations were conducted by seating the crown on the tooth preparation and visual assessment was done using sharp explorer along the margins. Clinically acceptable crowns were then evaluated on the bite-wing radiograph. Any horizontal or vertical inaccuracy of >0.5mm at the proximal margins was recorded as 'discrepancy'. Data was analysed using SPSS 22.
Results: …

Navigating Through Our History In Research: An Altmetric Analysis For Publications By The Full-Time Operative Dentistry Faculty At The Aga Khan University Hospital In The Past Decade, Nighat Naveed, Fahad Umer

Section of Dental-Oral Maxillofacial Surgery

Objective: To analyse the social dissemination of publications by fulltime faculty at a tertiary care facility.
Methods: The retrospective study was conducted at the Aga Khan University Hospital, Karachi, and comprised publication records of the fulltime Operative Dentistry faculty members between July 2011 till July 2021. The search was done on Google Scholar, Altmetric Explorer and PubMed electronic databases. After final screening, all the publications in PubMed-indexed journals, including in vitro studies, randomised controlled trials, original research articles, case reports and letters to the editor, for which the Altmetric Attention Score was available were included.
Results: Of the 225 publications …

How Effective Are Eco-Friendly Dental Hygiene Products In Preventing Carious Lesions And Improvement In Overall Oral Health, Mary Claryns Truz, Destiney Coles

Dental Hygiene Student Scholarship

Objectives: The purpose of this review of literature is to measure the effectiveness, and future of eco-friendly¹ dental hygiene products in the dental field. As the manufacturing of products from food to technology increases over time, so does the sentiment for environmental practices. The numerous organizations that push for more sustainable initiatives in modern-day society continue to increase over time. The efforts for sustainable practices can be seen in the field of dentistry through dental hygiene products. These products range from compostable toothbrushes, waste-free toothpastes to organic floss advertised for use by the public. In reviewing the efficacy of …

Association Among Anterior Maxillary Dental Arch Form, Alveolar Bone Thickness And Sagittal Root Position Of Maxillary Central Incisor : A Cone Beam Computed Tomography Analysis, Suttikiat Somvasoontra

Chulalongkorn University Theses and Dissertations (Chula ETD)

Purpose: This study evaluated the association among the dental arch form, age-sex groups, and sagittal root position regarding alveolar bone thickness in the maxillary central incisor using cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images of 280 patients were categorized based on the dental arch form and age-sex groups. Five hundred and sixty sagittal CBCT images of the maxillary central incisors were examined to measure the labial and palatal bone thickness at the root apex level, at the mid-root level and 3 mm apically from cemento-enamel junction, with SRP classification. Chi-square, Kruskal-Wallis test, and multiple linear regression were …

Comparison Of Volumetric Changes At Implant Connector Among Three Different Types Of Abutment After Cyclic Loading, Piyawan Jirayusakamol

Chulalongkorn University Theses and Dissertations (Chula ETD)

The aim of this study was to compare the volumetric change of dental implant among three different types of abutments after cyclic loading.Thirty dental implants (4.1x10 mm., Straumann®) were used .All of them were inserted in acrylic resin block with usual surgical protocol to gain primary stability and be able to retrieve for volumetric measurement later. Ten of each dental implant connected with Titanium abutment (Group1: Variobase abutment Straumann®), Gold abutment (Group2: UCLA abutment Straumann®) and Zirconia abutment (Group 3: Care abutment Straumann®) consecutively. Then all specimen was submitted to cyclic loading (1x106 cycles, axial load, 100N, 15 Hz) at …

The Effect Of Crowding On The Accuracy Of 3d Printed Aligners, Tonya Spangler

Theses and Dissertations

Purpose: To evaluate the accuracy of three-dimensionally (3D) printed aligners compared to conventional vacuum-formed thermoplastic aligners with varying levels of dental crowding.

Methods: Digital intraoral scans of 10 different cases were assigned to their respective groups (n=10, each, 30 total) as follows: no crowding (control), moderate crowding, and severe crowding. Using 3Shape software, digital aligner samples were created in standard tessellation language (STL) file format and randomly 3D printed. The same STL files of each case were also sent to a dental laboratory for the fabrication of vacuum-formed samples, which is the current technology used for manufacturing aligners. The intaglio …