Other Engineering Commons^™

Sheraton Hotel- Life Safety Report, Raul M. Farfan

Fire Protection Engineering: Culminating Experience Project Reports

This report evaluates the prescriptive life safety requirements for levels one (1) through four (4) of the Sheraton Hotel in downtown Phoenix. In addition, this report discusses two fire scenarios that evaluate the tenability during egress the in pre-function area on level two (2) and in the main ballroom on level three (3) of the hotel.

The prescriptive standards/codes used to evaluate the hotel are the International Building Code (IBC), International Fire Code (IFC), and applicable standards from the National Fire Protection Association (NFPA). Performance based analysis were conducted using Pathfinder, CFast, and Fire Dynamic Simulator (FDS). Two fire scenarios …

Building X- Fire Protection System And Life Safety Evaluation, Anthony W. Sublett

Fire Protection Engineering: Culminating Experience Project Reports

The fire protection and life safety systems for Building X were evaluated for compliance in accordance with applicable nuclear power plant non-power block regulatory requirements, NEIL, INPO, IBC, and NFPA design requirements, codes, and standards. Building X is a one-story building with two internal balconies with 10 occupants per balcony, which is made of non-combustible materials that also has a partial basement with concrete walls (is normally unoccupied), which houses potable water pumps and piping for the facility. Building X falls under the definition of mixed occupancy per the International Building Code (IBC) and the Life Safety Code (LSC). Since …

Orange Grove Library- Prescriptive And Performance-Based Fire And Life Safety Evaluation, David A. Boackle

Fire Protection Engineering: Culminating Experience Project Reports

This report describes the analysis of the Orange Grove Library in Gulfport, Mississippi, using prescriptive and performance-based techniques to evaluate fire and life safety. The prescriptive analysis is broken down into four components: alarm, egress, structural and suppression. Prescriptive codes are written by consensus, such that adhering to these codes will produce a reasonable balance between cost, function and safety. The performance-based design analysis uses analytical tools to predict how this particular building would perform under specific fire conditions, chosen based on the actual building in place. Life safety is the primary goal of this analysis. Achievement of this goal …

Analysis Of Costco, San Francisco, Ian Levine

Fire Protection Engineering: Culminating Experience Project Reports

This report provides an in-depth analysis of the fire safety systems and design considerations of the Costco store located at 450 10th Street in San Francisco, California, satisfying the requirements for completion of the FPE 596 – Culminating Experience in Fire Protection Engineering academic series. The building is introduced, followed by an analysis of the building structure, alarm and detection, egress, and sprinkler systems are designed based on prescriptive code. These systems are then analyzed from a performance based perspective to gain understanding of how the systems will respond to a challenging design fire. Their response is used to determine …

Henderson Engineers Building- Fire Protection, Life Safety Code Compliance, And Key Issues Report, Alex Ataiyan

Fire Protection Engineering: Culminating Experience Project Reports

A fire protection and life safety analysis of the Henderson Engineers, Inc. (HEI) building in Lenexa, KS (Kansas City) is performed. Both prescriptive and performance-based methods have been used to evaluate the building against the codes and standards of the 2012 International Building Code (IBC).

The following prescriptive fire protection and life safety systems were analyzed: Occupancy Classification, Building Construction Type, Fire Protection Features, Structural Fire Protection, Fire Barriers, Automatic Fire Sprinkler System, Fire Alarm System, and Means of Egress

During the prescriptive approach, the following deficiencies were identified: 1) As-builts indicate a horizontal assembly fire-resistance rating of only 1-hour, …

Eric W. Rood Administration Center- Fire Protection And Life Safety Analysis, Clinton M. Carman

Fire Protection Engineering: Culminating Experience Project Reports

A Fire Protection & Life Safety Analysis was conducted in order to fulfill the requirements for the degree of Master of Science in Fire Protection Engineering. The Fire Protection & Life Safety Analysis consisted of a prescriptive and performance-based analysis of the Eric Rood Administration Center (Rood Center).

The prescriptive based analysis was conducted to determine if the Rood Center adhered to the applicable codes and standards. It utilized the 2013 California Building and Fire Codes and the 2012 Life Safety Code (NFPA 101). Other NFPA codes that were referenced included the 2013 edition of NFPA 13, Standard for the …

Repay – Revamping The Reimbursement Process, Esha Joshi

Computer Science and Software Engineering

Repay is a streamlined service for interviewees to be repaid by companies. It plays off the idea that many graduating college seniors endure when looking for a job: there is not a hassle-free process for interviewees to be repaid for expenses when traveling to and from an interview. The goal of this senior project was to develop a cross-platform application (iOS and web) with the hopes of improving the reimbursement process for both future employees and company HR representatives. Research suggests that a more simplistic process will allow candidates to receive their money quickly and enhance the overall image of …

Calcium Phosphate As A Key Material For Socially Responsible Tissue Engineering, Vuk Uskoković, Victoria M. Wu

Pharmacy Faculty Articles and Research

Socially responsible technologies are designed while taking into consideration the socioeconomic, geopolitical and environmental limitations of regions in which they will be implemented. In the medical context, this involves making therapeutic platforms more accessible and affordable to patients in poor regions of the world wherein a given disease is endemic. This often necessitates going against the reigning trend of making therapeutic nanoparticles ever more structurally complex and expensive. However, studies aimed at simplifying materials and formulations while maintaining the functionality and therapeutic response of their more complex counterparts seldom provoke a significant interest in the scientific community. In this review …

Final Project Report: Motorized "Hover Board", Gabriele Pregadio

Biomedical Engineering

No abstract provided.

Office High Rise Building- Fire Protection And Life Safety Analysis, Fabio Renato Zocal Mazza

Fire Protection Engineering: Culminating Experience Project Reports

This project developed the traditional prescriptive-based design analysis of the fire protection features of an existing office high rise building in the city of Sao Paulo, in Brazil. The analysis was then complemented by performance-based analysis of the building. The building is a high rise office located in a metropolitan area, provided also with underground car parking garages and a small theater. The fire protection analysis was conducted based on the local Sao Paulo state fire codes, mainly the Sao Paulo State enactment (Decreto Nº56.819/2011) and Sao Paulo Fire Department Technical Instructions; and, in addition to the local codes, the …

3-Bay Aircraft General Maintenance Hangar- United States Air Force, Zach Ataiyan

Fire Protection Engineering: Culminating Experience Project Reports

This report contains a prescriptive design analysis and a performance based design analysis for a newly constructed United States Air Force 3-Bay Aircraft General Maintenance Hangar and support spaces.

The prescriptive design analysis reviews the code requirements for fire suppression, fire alarm, life safety, and structural fire protection. Additionally, the hydraulic demands of the fire suppression system, and the voltage drop and power supply requirements of the fire alarm systems were calculated. The results of the analysis portray a compliant prescriptive design of the fire protection systems.

The performance based design analysis evaluates the hazards in the 3-bay facility for …

Monticello Office Building- Fire And Life Safety Analysis, Mark James Masciarelli

Fire Protection Engineering: Culminating Experience Project Reports

A Fire and Life Safety analysis was performed on the existing Monticello Office Building located in Delaware, USA. The Monticello Office Building is a mixed use building that contains office space to support a population of 700 people, dining facilities to accommodate approximately 400 people, and a conference area for up to 125 people. The building is composed of two major components; a five (5) story office wing and a one (1) and two (2) story amenities wing that mainly houses the food service, dining, kitchen, retail and conference areas. A prescriptive analysis of this building was performed to determine …

Statistical Models Of Runway Incursions Based On Runway Intersections And Taxiways, Mary E. Johnson, Xun Zhao, Brian Faulkner, John P. Young

Journal of Aviation Technology and Engineering

According to the Federal Aviation Administration (FAA), the number of runway incursions are rising. The configuration of runways and taxiways at airports has been identified by the FAA as possibly being related to the number of incursions. In this paper, the relationship between airport geometry factors and the number of runway incursions at specific United States airports is explored using statistical analyses. Airport operations data from the FAA Air Traffic Activity System, runway incursion data from the FAA Aviation Safety Information Analysis and Sharing System from 2009 through 2013, and airport geometry data created using airport geometry features from the …

Women In Engineering P-12 Outreach, Sue R. Bayley Mrs.

Purdue P-12 Networking Summit & Poster Session

No abstract provided.

Measuring Accuracy Of Two 3d Printing Materials, Mudassir Ali

Master of Technology Management Plan II Graduate Projects

Part accuracy is one of the important aspect in the manufacturing industry. The overall inaccuracy of the parts being built by RP technology has been one of the major challenges that need to be overcome. Though all the printing materials come with specifications, but the suppliers and manufactures does not specify the accuracy of the materials. In this study we established a study which compares the accuracy of the materials in consideration and performed an experiment to establish the superiority of a material in terms of accuracy over each other. The purpose of this project was to compare the dimensional …

Toward Mining Massive And Multi-Dimensional Data For Extreme Hydrometeorological And Climate Event Analyses, Ling Qiu, Francisco Munoz-Arriola, Carlos M. Carrilo

UCARE: Research Products

This poster presents the research on the main patterns of spatial distribution and temporal variability of precipitation and temperature in the Missouri River Basin (MRB). MRB has 117 million acres in cropland, produces of 46%, 22%, and 34% US's wheat, corn, and cattle, respectively. Also, MRB is known for intense weather and extreme climate variability. The approach is to identify different patterns of spatial distribution and temporal variability of precipitation and temperature through the use of a Principal Component Analysis. We have found that precipitation and temperature are the ideal meteorological variable to test spatiotemporal variability of extreme events using …

Manipulation Of Surface Plasmon Resonance In Metal And Alloy Thin Films Using Dielectric Media, Benjamin Dubray Hall

Graduate Theses - Physics and Optical Engineering

Surface plasmon polaritons are coherent electron oscillations that propagate along an interface between a Drude metal and a dielectric medium. The excitation of polaritons is highly dependent on the dielectric properties of the metal, the thickness of the metal, and the optical properties of the dielectric material. First, plasmonic activity is assessed for several thicknesses of silver and nickel chromium under He-Ne incidence. Relationships between film thickness and metal dielectric function are explored in both cases. To manipulate the plasmonic activity at the silver surfaces, two methods are explored. Silver oxide was grown on the surface of the silver films, …

Direct Band Gap Gallium Antimonide Phosphide (Gasbxp1-X) For Solar Fuels., Harry Benjamin Russell

Electronic Theses and Dissertations

Photoelectrochemical water splitting has been identified as a promising route for achieving sustainable energy future. However, semiconductor materials with the appropriate optical, electrical and electrochemical properties have yet to be discovered. In search of an appropriate semiconductor to fill this gap, GaSbP, a semiconductor never tested for PEC performance is proposed here and investigated. Density functional theory (DFT+U) techniques were utilized to predict band gap and band edge energetics for GaSbP alloys with low amount of antimony. The overall objective of this dissertation is to understand the suitability of GaSb_xP_1-x alloys for photoelectrochemical water splitting application. Specifically, …

Bbq Grill Temperature Uniformity Study, Monty Dodge Jr, Samuel Melo

Mechanical Engineering

Bull Outdoor Products, Incorporated, a barbeque grill and outdoor kitchen manufacturer, sponsored this project with the intent of improving the temperature uniformity across the surface of their barbecue grills. For this project, the Cal Poly team of mechanical engineering students, Monty Dodge Jr. and Samuel Melo, used the Brahma grill head model with setups for both natural gas and propane. In order to determine exactly what the uniformity across the grill surface was, the student team designed a testing apparatus which would measure a grid of temperature locations one inch apart spanning an area 16 by 36 inches. Developing a …

Extended Gamut Printing In Flexographic Packaging And The Impact Of Brand Management, Andrew Bogan

Honors Theses

Flexography is the dominant print process in regards to the reproduction of packaging products. Packaging, particular the color and graphics, is an essential tangible element for brand owners striving for brand management. Extended gamut printing is a printing technique that can produce high color saturations on packaging samples, which can have positive implications for brand management. Currently, most information on extended gamut printing is proprietary, making it very difficult for non-print industry members to obtain and utilize information relating to the benefits of extended gamut printing. The aim of this study was to provide evidence that packaging samples with extended …

Ergonomics In Space Flight – Past, Present, & Future, Robert Consolo

Human Factors and Applied Psychology Student Conference

From the days of “The Rocket Men” to the uprising of SpaceX, spaceflight has always inspired awe in humanity. If you examine the men that were apart of those first missions, you will find that they were not only the most capable, but won the genetic lottery to become this nations first astronauts. Looking to the times of Mercury, you see the extreme constraints that potential astronaut candidates had to meet in order to go to space. Aside from the rigorous medical testing, potential candidates also had to meet strict height and weight requirements. Early candidates could not be taller …

Mems Based Tracking Devices For Measuring Distribution Hazards On The Product And Package, Changfeng Ge, Tom Oh, Daniel Johnson, Anthonio Mondragon, Kai Lei

Journal of Applied Packaging Research

This paper introduces two microelectromechanical systems (MEMS) based working data logger prototypes and the cloud based data analysis system that were trademarked and patented as Pak-Track^TM-I and Pak-Track^TM-II. The Pak-Track^TM-I is designed to wirelessly record and report information in real time about individually packaged products during transit. The system allows the user to immediately view the data with a Global Positioning System (GPS) location via a secured website or Android tablet or smart phone. The Pak-Track^TM-II is a standalone device that stores all measurements on internal memory without communicating over a network. …

Decision Making Framework Using Probabilistic Pareto For Sustainable Packaging Life Cycle Assessment, Euihark Lee, Huihui Qi, Hae Chang Gea

Journal of Applied Packaging Research

The Packaging industry is one of the largest industries in the world and is associated with many environmental concerns. To reduce its environmental impacts, designing sustainable packaging has been one of the top priorities in packaging industries. A common tools for evaluating the environmental impact of a package design is the Life Cycle Assessment (LCA) which provides information on environmental impacts for different indicators. However, making decisions based on the LCA results leaves us with major challenges. First, the LCA tools should consider various uncertainties such as measurement and data quality. Second, the LCA may give conflicting results on different …

Engineering Outreach Education Through Social Media, Katie E. Meiergerd, Dagen Valentine, Jennifer R. Keshwani, Bradley Barker

UCARE: Research Products

Familiarizing teachers and educators with Engineering and other related STEM fields is crucial in educating students, so ensuring teachers with access to these resources is important. The objective of this work is to identify ways to use social media to provide support to K – 12 educators interested in implementing engineering education with their students.

Processing And Interpretation Of Three-Component Vertical Seismic Profile Data, Ross Sea, Antarctica, Meltem Akan

Graduate Theses & Non-Theses

The Antarctic Geological Drilling Program (ANDRILL) AND-2A drill hole was drilled, cored and logged in southern McMurdo Sound (SMS) in the western Ross Sea, Antarctica during the austral summer of 2007. A single near-offset, over-sea ice vertical seismic profile (VSP) was collected in the AND-2A drill hole as a part of the logging program. The source for VSP data collection was a Generator Injector (GI) air-gun which was suspended by a cable through a hole made in the sea ice. The reason for selecting a GI air gun was the minimization of the bubble pulse effects which are prevalent in …

Scientometric Analysis Of Technology & Innovation Management Literature, Kadir Yildiz

Theses and Dissertations

The management of technology and innovation has become an attractive and promising field within the management discipline. Therefore, much insight can be gained by reviewing the Technology & Innovation Management (TIM) research in leading TIM journals to identify and classify the key TIM issues by meta-categories and to identify the current trends. Based on a comprehensive scientometric analysis of 5,591 articles in 10 leading TIM specialty journals from 2005 to 2014, this research revealed several enlightening findings. First, the United States is the major producer of TIM research literature, and the greatest number of papers was published in Research Policy …

Satellite Ephemeris Correction Via Remote Site Observation For Star Tracker Navigation Performance Improvement, Jorge E. Diaz

Theses and Dissertations

In order for celestial navigation observing satellites to provide accurate positioning estimates, precise ephemerides of the observed satellites are necessary. This work analyzed a method to correct for satellite ephemeris to be used in celestial navigation applications. This correction is the measured angle differences between the expected location of the satellite, which is given by propagating publicly available Two-Line Elements (TLE), and their observed angles from a precisely known reference site. Therefore, the angle difference can be attributed completely to satellite ephemeris error assuming instrument error was accounted for. The intent is to calculate this correction from the reference site …

Optimizing Allocation Of U.S. Humanitarian Civic Assistance Projects In Support Of Developing Foreign Democracy, Christopher E. Wittman

Theses and Dissertations

Humanitarian projects in foreign countries are funded by the U.S. government to foster peace, prosperity, and the spread of democratic ideals around the globe. The type and scope of projects are restricted by current doctrine and funding regulations. Specifically in 2014, USAF personnel supported medical and educational construction projects/programs in the country of Belize. Within Belize, medical and educational projects were funded under the Humanitarian and Civic Assistance (HCA) program through the NEW HORIZONS exercise. Fiscal constraints, including shrinking budgets due to sequestration, have placed greater emphasis in the responsible distribution of resources and foreign assistance. The purpose of this …

Autoencoded Reduced Clusters For Anomaly Detection Enrichment (Arcade) In Hyperspectral Imagery, Brenden A. Mclean

Theses and Dissertations

Anomaly detection in hyper-spectral imagery is a relatively recent and important research area. The shear amount of data available in a many hyper-spectral images makes the utilization of multivariate statistical methods and artificial neural networks ideal for this analysis. Using HYDICE sensor hyper-spectral images, we examine a variety of preprocessing techniques within a framework that allows for changing parameter settings and varying the methodological order of operations in order to enhance detection of anomalies within image data. By examining a variety of different options, we are able to gain significant insight into what makes anomaly detection viable for these images, …

Purdue Tap, Carly Turow

Engagement & Service-Learning Summit

Purdue TAP provides high-value solutions that help Indiana businesses maximize their success by increasing profits, reducing costs, and implementing growth and innovation engineering systems. Our organization serves more than 500 companies annually by implementing continuous improvement principles in the areas of productivity, growth and technology. Purdue TAP has helped our clients collectively achieve over $1 billion of economic impact in Indiana since 2005.