Other Engineering Commons^™

Thermal Protection For Extreme Labor, Christopher Hanks, Dave Morgan

Journal of Undergraduate Research

Many people died when temperatures rose to 115°F in Southeastern Europe in July of 2000(Blumberg). The Sahara Desert exceeds 120°F, creating a nearly inhospitable environment. The temperature off of the Phoenix Airport runway was reported at 150°F the summer of 2009. This very same environment is the workplace of ramp agents who lift and load heavy luggage into passenger in, and day out. Through researching methods of heat transfer, and interviewing workers, I have conceptualized a number of cooling solutions which will protect workers from the heat.

Investigation Of Sound Transmission Through An Open Window Into A Room, Caleb F. Sieck

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

In recent decades, noise levels in cities and the associated annoyance and health consequences have become regular topics of discussion. As a result, the assessment of environmental noise transmitting into buildings has received much attention. Current models of sound transmission through open windows have either neglected their thickness or the presence of a room behind on one side. The objectives of the present work were to (1) develop an accurate analytical model of sound transmission through an open window of finite thickness into a room, (2) verify the analytical model using a finite element model and experimental measurements, and (3) …

The Role Of Personality And Team-Based Product Dissection On Fixation Effects, Christine A. Toh, Scarlett R. Miller, Gül E. Okudan Kremer

Interdisciplinary Informatics Faculty Publications

D esign fixation has been found to be complex in its definition and expression, but it plays an important role in design idea generation. Identifying the factors that influence fixation is crucial in understanding how to enhance the design process and reduce the negative effects of fixation. One way to potentially mitigate fixation is through product dissection activities since this activity has been shown to increase creativity and design space exploration in engineering design. However, product dissection has not been studied in the context of design fixation, so it is unclear if, or how, this type of activity influences fixation. …

Industry Based Multimedia Education, Cameron Wilson, Dr. Geoffrey Wright

Journal of Undergraduate Research

My goal was to study how the cinematographic industry teaches multimedia and digital production, and compare that with how Utah schools teach multimedia and digital production. The outcome was somewhat of a surprise to me. I thought that public school teachers, having proper pedagogical training, and all having graduated from college would be able to provide the students with an adequate learning environment. I found this to be wrong. The students at the Industry based schools overall were much more prepared to go out in the world and be successful in the industry of multimedia. The findings are backed by …

Cloud Security For Medical Imaging, Craig Treasure, Dr. Chia-Chi Teng

Journal of Undergraduate Research

Current medical imaging technology exists in the form of large and expensive systems in hospitals inside the network firewalls. Data from these machines is only transmitted on a hospital’s computer network to maintain the privacy of patient’s personal information and images. These expensive machines require high processing power to process medical images to be used by physicians and doctors. Patient’s data is protected by keeping it within the hospital’s private computer network.

Modular Containerized Provisional Habitations For Emergency Disaster Relief, Matthew Butler, Brian Capt

Journal of Undergraduate Research

Perhaps the greatest challenge to this project was determining which materials to use in the construction of the modules. There are a multitude of materials that could have been used for the project, many of which might have worked well for the designated use. The shelters have a specific set of criteria that required several different properties that the material had to fill, including: (a) price—it needed to be fairly inexpensive to purchase and ship to a shipping container assembly area, (b) durability—the panels that make up the module must be made from a material that can support itself, the …

A Meaningful Housing Policy Would Deal With Defautling Landlords And At-Risk Tenants, Lorcan Sirr, Tom Dunne

Media

No abstract provided.

Developing A Collaborative Virtual Learning Environment Between Students In Cross Disciplines In The Built Environment., Fiacra Mcdonnell, Ruairi Hayden

Articles

Integrated Project Delivery is a rapidly developing approach to Design and Construction.This approach uses business structures, new technologies, and newly developing practices to collaboratively utilise the talents and contributions of all participants in the Design and Construction process.This project replicated this approach by creating a collaborative project between the School of Construction and the School of Real Estate and Construction Economics. The term “collaborative learning” refers to a method of delivery in which students at various performance levels work together in small groups towards a common goal. The students were responsible for one another’s learning as well as their own. …

Fire Protection Analysis Of Campus Building, Mackenzie Hill

Fire Protection Engineering: Culminating Experience Project Reports

A prescriptive and performance based analysis has been conducted on a College Campus Building in Southern California. This building is still in the approvals process and has been designed to meet the design standards in the 2010 California Building Code (CBC) and relevant NFPA codes. The building is proposed to be the center of operations as well as having administration facilities for the College. It will house an administrative office, production and support facilities. The project is three stories and includes a balcony that does not qualify as a story. The top floor is greater than 30 feet from grade …

Fire And Life Safety Analysis- Center For Science And Mathematics Building #52, Laura Radle

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this fire and life safety analysis is to determine whether Cal Poly’s Center for Science and Mathematics (CSM) meets fire safety goals. The primary fire safety goal is to provide building occupants with an environment that is reasonably safe from fire. This goal can be achieved by protecting the occupants not intimate with the initial fire development and improving survivability of those occupants intimate with the initial fire development, (NFPA 101, 2006). A prescriptive-based design approach and a performance-based design approach are used to evaluate building safety. The prescriptive-based approach is used to evaluate the building’s structural …

Mixed‐Use Commercial And Residential Podium Building, Gene Voloshenko

Fire Protection Engineering: Culminating Experience Project Reports

This report provides a summary of the principal fire protection and life safety features for a mixed use commercial and residential Podium Building for compliance with the 2000 International Building Code (IBC) and the 2003 NFPA 101 “Life Safety Code”. IBC permits compliance with the prescriptive Code requirements using Alternative Solutions that will achieve at least the minimum level of performance required by the IBC as defined by the objectives and functional statements and as described in the NFPA 101 Chapter 5. Alternative solutions for this project were modeled using the Fire Dynamics Simulator (FDS). One of the primary recommendations …

Fire Protection Analysis Of The Bonderson Engineering Projects Center, John Cote

Fire Protection Engineering: Culminating Experience Project Reports

A Fire and Life Safety Analysis of the Bonderson Engineering Projects Center (BEPC) located on the Cal Poly campus is performed. Prescriptive and Performance Based approaches are used to evaluate the BEPC for compliance with the current fire and building code requirements. The fire protection systems and features of the BEPC analyzed include the following: Egress Systems, Fire Detection, Alarm, and Communications Systems, Fire Suppression Systems, and Structural Fire Protection Systems. Prescriptive analyses are performed to determine if the as-built design meets the requirements of the code. Performance-Based analyses are performed to provide insight to the prescriptive design utilized in …

Telecommunications Network Switching Facility, Eric Kumar

Fire Protection Engineering: Culminating Experience Project Reports

This report is on a mission critical telecommunications network switching facility located in Southern Mississippi. The life safety and property preservation measures are summarized in this report. The prescriptive design approaches for various fire and life safety systems in telecommunications facilities were evaluated against the performance based approaches studied in the Cal Poly Fire Protection Engineering curriculum. Majority of the prescriptive approaches are in accordance with the performance based solutions, however the smoke management system’s performance and prescriptive design yields a significant discrepancy. For the smoke management system, a difference in the flow rates is observed between the exhaust and …

Fire And Life Safety Evaluation Of The Providence Pavilion, Oscar J. Zuniga

Fire Protection Engineering: Culminating Experience Project Reports

The fire and life safety systems of the Providence Pavilion, a four-story addition to the Providence Medford Medical Center in Medford, Oregon, are examined for compliance with applicable design and construction codes and standards and are found to comply with codes and conform to standards. The prescriptive requirements for occupancy classification, construction type, structural fire protection, egress systems, fire alarms, and fire protection are reviewed. Three different fire scenarios are developed and are then employed to study the fire and life safety systems’ performance using fire and egress modeling tools and simulations. Using this performance-based approach, the fire and life …

Culminating Project- U.S. Federal Courthouse, Joshua W. Elvove

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to select and evaluate a building for compliance with prescriptive and performance based requirements, that apply the concepts learned from previous courses taken as part of the master’s fire protection engineering degree curriculum at Cal Poly, San Luis Obisbo. The report discusses applicable code requirements for building construction, egress, fire alarm initiation and notification, and fire suppression and evaluates the building’s performance, including occupant movement, when subjected to two assumed fires. Fire Dynamics Simulator (FDS) was used to generate data used during the performance analysis. The performance analysis reveals that meeting prescriptive requirements doesn’t …

Fire Protection Analysis Of A Fresno Elementary School, Garen Lencioni

Fire Protection Engineering: Culminating Experience Project Reports

This report details the fire and life safety analysis of a Fresno Elementary School. Both prescriptive and performance based analysis were used to determine compliance with the building codes and fire codes which the building was constructed under. The prescriptive analyses included evaluation of the egress system, structural fire protection requirements, fire detection and alarm system and fire suppression systems. The prescriptive analyses were done to show the code requirements and how the building complies with them. The performance analyses were done to analyze the performance of the building in the event of a fire scenario. Three fire scenarios were …

Participants Perspective Of The Fas Redundant Placement Scheme, Maurice Collins, Robert Morris

Conference papers

The aim of this study is to gather and analyze feedback from participants of a scheme which was put in place in the early stages of the Irish economic recession to provide work placements to redundant Apprentices. As part of the research for this paper a series of qualitative interviews were conducted with partipancts of the FAS Redundant Apprentice Placement Scheme (RAPS). FAS is the authoriity which organises and administers the Statutory Apprentice Scheme in Ireland.The scheme detailed in this study was put in place to aid Apprentices who has been made redundant, to complete phases 3,5 and 7 of …

Barbeque Grill Temperature Distribution Design Improvement, Peter Gobell, Connor Mcgill, Thomas Willson

Mechanical Engineering

Team License to Grill set out to asses Bull Outdoor Products, Inc.’s barbeques and quantify the apparent uneven temperature distribution or “hot spots” and “cold spots” across the grill. This testing was accomplished with the design and fabrication of a test fixture allowing for accurate and repeatable temperature collection across the barbeque. With results that matched the sponsor’s claims of hot and cold spots, an engineering model was made using heat transfer and thermodynamic equations. Once the model somewhat resembled the experimental data, it was used to suggest different modifications that would allow for better temperature distribution. It was discovered …

The Quantification Of Wind Turbulence By Means Of The Fourier Dimension, Thomas Woolmington, Keith Sunderland, Jonathan Blackledge, Michael Conlon

Conference papers

Signal Processing within the frequency domain has long been associated with electrical engineering as a means to quantify the characteristics of voltage/current waveforms. Historically, wind speed data (speed/direction) have been captured and stored as statistical markers within a time series description. This form of storage, while cumbersome, is applicable in wind regimes that are relatively laminar. In urban environments, where the associated topographies and building morphologies are heterogeneous, wind speeds are highly turbulent and chaotic. In such environments and with particular reference to wind energy, time series statistics are of limited use, unless the generic probability distribution function (PDF) is …

Comparing Class A Compressed Air Foam Systems (Cafs) Against Plain Water Suppression In Live Fire Gas Cooling Experiments For Interior Structural Firefighting, Sean Carter Mitchell

Master's Theses

Wildland fire services have successfully integrated compressed air foam systems (CAFS) into their fire suppression arsenal over the last few decades to effectively increase the firefighting ability of water. Many urban fire departments have done the same, but far more still rely on plain water to extinguish Class A fires. Many claims have been made about the advantages and disadvantages of firefighting foams, but only limited research has been conducted on the subject to date. Fire departments need more information, beyond that provided by foam suppliers and CAFS equipment manufacturers, to make an independent decision on whether or not to …

Evaluation Of Thermophile Algae In Horizontal Photo-Bioreactor, Olivier Schmied

BioResource and Agricultural Engineering

No abstract provided.

Dedion Axle Senior Project, Nick Schraan, Mark Shushnar, William Swenson, Ramy Tall

Mechanical Engineering

The sponsor, EV Grid Inc. is a company looking to the future with the development of a vehicle to grid infrastructure. The vehicle in development is a Ford E-250 Van which had been converted to electric drive with a front motor, rear drive layout. The sponsor wanted to move the electric motor to the rear and develop an axle to support this change. By eliminating the driveshaft, a more efficient use of battery space could be utilized. The goal of this project is to design and fabricate a prototype deDion rear axle which incorporates a system of drive components that …

Fire Protection Analysis Of The ‘Center For The Arts’ Building', Steven W. Carman

Fire Protection Engineering: Culminating Experience Project Reports

In partial fulfillment of the requirements for the Degree of Masters of Science in Fire Protection Engineering, a prescriptive and performance-based analysis was performed on a building housing the Center for the Arts. The building was constructed in 1947 in California as an automobile dealership and repair shop under the provisions of the then-controlling Uniform Building Code. It subsequently underwent several occupancy changes and has since served as a beauty school, gymnastics center, and currently as a performing and visual arts center. Prescriptive analyses were conducted based primarily upon the provisions of the 2010 California Building and Fire Codes, and …

Life Safety Report Xyz Office Building Denver Colorado, Keith Dix

Fire Protection Engineering: Culminating Experience Project Reports

This report is a Life Safety Analysis of the XYZ building in Colorado. It is a government contract facility and as such prefers that its real name and location not be utilized for this report. The building was assessed prescriptively using the 2009 International Building Code (IBC) and was found to be predominantly compliant with the code and the relevant referenced standards. The building was then assessed using a Performance Based Design in accordance with methodologies found and addressed in common fire protection literature. The Design Criteria chosen to determine tenability for the Required Safe Egress Time (RSET) were Carbon …

Adams 14 High School Life Safety Report, Todd L. Brand

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this Life Safety Report (LSR) is to provide a prescriptive based analysis of the Adam County High School based on the existing codes that the building was constructed under. This will include exterior and interior building construction, fire protection systems, and egress requirements. Additionally, this report will evaluate selected performance based design scenarios for the High School. Findings and recommendations to the performance based design scenarios, along with any deficiencies, are noted at the conclusion of the report. The prescriptive analysis of this report will focus on the International Building Code requirements with emphasis on Chapters 4 …

Developing A Strategic Policy Choice Framework For Technological Innovation: Case Of Chinese Pharmaceuticals, Leong Chan

Dissertations and Theses

With the growing trend of globalization and rapid development of high technologies, emerging economies face more challenges in technology development because they are chasing a fast-moving frontier. They need to identify global technology trends and adapt to local needs and capabilities. Strategies for technology development differ among countries at different developmental stages.

In this research, a technology policy choice framework is developed to link prospective high-tech areas, technology development strategies, and various innovative resources. The research approach is to develop a hierarchical decision model (HDM) and apply the analytic hierarchical process (AHP). Experts are invited from diverse sources to provide …

The Fundamentals Of A Course On The Environmental Impacts Of Ships, Patricia A. Coker

LSU New Orleans Theses and Dissertations

No abstract provided.

Innovation In Ship Design, Christopher B. Mckesson

LSU New Orleans Theses and Dissertations

What is innovation in ship design? Is it a capability that is inherent in all naval architects? Is it the result of the application of a certain set of tools, or of operation within a certain organizational structure? Can innovation be taught?

Innovation is a creative act that results in a new and game-changing product. The emergence of an innovative product creates an asymmetric market. The emergence of an innovative weapon creates an asymmetric battlefield. It is clearly in the economic and military interest of the United States to be able to develop and deploy innovative products, including innovative ships. …

Nuts & Bolts, Volume 1, Issue 3

Friends of the Larsen Tractor Museum

Museum Open House
Calling All Tractor Clubs
Allis WC Donation
Tractor Show Information

Professional Skills Portfolio For A Progressive Engineering Education, Dermot Mcgarthy, David Kennedy

Articles

At the 2013 launch of the return to work scheme, “Springboard” in Dublin, it was stated that employers were seeking staff with enhanced language, presentation, communication, coping, and team-working skills. Graduates without these skills were finding it more difficult to gain permanent employment and were more likely to find themselves out of work unless they developed these skills. Enhancing personal development skills in education requires a revision of existing programmes. Not alone will these skills open new doors of opportunity for those who have lost their jobs during the recession, but should help sustain them going forward. The education of …