Other Engineering Commons^™

Incorporating Reverse Engineering Methodology Into Engineering Curricula, Trevor Wanamaker

Purdue Polytechnic Masters Theses

Wanamaker, Trevor W., M.S., Purdue University, May 2012. Incorporating Reverse Engineering Methodology into Engineering Curricula. Major Professor: Craig L. Miller.

Using a qualitative research approach, this study investigated the thoughts and feelings of students regarding the question, “what factors need to be considered when Reverse Engineering (RE) methodology is incorporated into engineering curricula?” The participants in the study were from the Introduction to Graphics for Manufacturing course at the West Lafayette campus of Purdue University. An RE survey was given to the all students enrolled in the course and 10 select students were given the opportunity to use a 3D …

What Kind Of Residential Property Market Do We Really Want?, Lorcan Sirr

Media

No abstract provided.

Planning Ahead Takes The Pain Out Of Growing Old, Lorcan Sirr

Media

No abstract provided.

Bulding 192, Engineering Iv, Cal Poly, San Luis Obispo, Mark Ferraresi

Fire Protection Engineering: Culminating Experience Project Reports

This report presents a fire and life safety analysis of Engineering IV. This analysis includes a review of prescriptive code requirements per the International Building Code, 2009 Edition and other applicable codes and standards; a description of the current fire and life safety systems or features in place; a prescriptive.based analysis; and a performance.based analysis. Beyond typical fire protection systems, such as means of egress systems and structural fire protection, Engineering IV was found to an automatic fire alarm and notification system, an automatic sprinkler system, and smoke control features. The systems and features surveyed were found to be within …

The Android Powwow Invitation Application, Jason Stewart

Computer Science and Software Engineering

No abstract provided.

Fire And Life Safety Analysis Of The Performing Arts Center's Christopher Cohan Center, David Phillips

Fire Protection Engineering: Culminating Experience Project Reports

This report is a review of the fire protection systems installed in the Christopher Cohan Center on the Cal Poly, San Luis Obispo campus. The systems reviewed are the passive structural fire protection, passive and active egress components, and active detection and suppression systems. The report examines whether the reviewed systems in the building meet the prescriptive requirements of the 2010 California Building Code(CBC) and California Fire Code(CFC). The building will be further subjected to a performance based analysis. Two design fire scenarios are presented, and an analysis of available safe egress time (ASET) is compared with an analysis of …

Fire Protection Analysis Of The Orfalea College Of Business Building (#3), William Fletcher

Fire Protection Engineering: Culminating Experience Project Reports

A performance and prescriptive based analysis was performed on the Orfalea College of Business Building (#3) on Cal Poly’s Campus. The building was originally designed to meet the 1985 Uniform Building Code (UBC). The building’s original design and current existing condition will be examined. The business building will be evaluated using the California Building Code, California Fire Code, NFPA 101 Life Safety code and other relevant NFPA Codes. The fire protection systems will be separated and evaluated into systems by Egress Components, Fire Alarm and Detection, Water- Based Suppression and Structural Fire Protection. The combined interactions of the systems are …

Ql+ Body Temperature Regulating Vest, Melissa Goss, Brittnee Cubero, Dillon Lynch, Greg Olsen, Julian Jazayeri

Biomedical Engineering

The purpose of this project is to design a thermal vest to be worn by individuals with spinal injuries to help regulate their core body temperature. Individuals with spinal injuries have impaired thermoregulation abilities which increase their susceptibility to succumbing to either heat stroke or hypothermia. This project focused on preventing heat stroke by inducing a cooling mechanism. To provide this cooling mechanism, a thermoelectric cooler was used to chill water in a reservoir. This water is then pumped through tubing sewn into the vest. The chilled water will absorb heat from the human body and return to the reservoir. …

Six Reasons Why The Property Market Will Be Slow To Recover, Lorcan Sirr

Media

No abstract provided.

Engineering Leadership, Mike Murphy, Eugene Coyle

Books/Book chapters

By 1921 the American sociologist Thorstein Veblen in his book The Engi-neers and the Price System argued for a technocracy in which the welfare of humanity would be entrusted to the control of the engineers because they alone were competent to understand the complexities of the industrial system and processes and thereby optimize and maximize its output. This chapter sets out to explore the extent to which Veblen’s technocratic leadership thesis has come to pass. We first review the role of the engineer in society and in the context of Europe, the US and China, and examine the influence of …

Fall Risk Assessments Based On Postural And Dynamic Stability Using Inertial Measurement Unit, Jian Liu, Xiaoyue Zhang, Thurmon E. Lockhart

Computer Sciences and Electrical Engineering Faculty Research

Objectives: Slip and fall accidents in the workplace are one of the top causes of work related fatalities and injuries. Previous studies have indicated that fall risk was related to postural and dynamic stability. However, the usage of this theoretical relationship was limited by laboratory based measuring instruments. The current study proposed a new method for stability assessment by use of inertial measurement units (IMUs).

Methods: Accelerations at different body parts were recorded by the IMUs. Postural and local dynamic stability was assessed from these measures and compared with that computed from the traditional method. Results: The results demonstrated: 1) …

Hispanic Maternal And Children's Perceptions Of Neighborhood Safety Related To Walking And Cycling, Norma Olvera, Dennis W. Smith, Chanam Lee, Jian Liu, Jay Lee, Stephanie Kellam, Jun-Hyun Kim

Computer Sciences and Electrical Engineering Faculty Research

This study examined neighborhood safety as perceived by children (mean age=10 years) and their mothers, and its association with children's physical activity. For all eight safety items examined, children perceived their environment as less dangerous than mothers (p<0.05). None of the multiple regression models predicting children's physical activity by safety perceptions were significant (p>0.10). The maternal perception model explained the highest percentage of variance (R²=0.26), compared to the children's perception model (R²=0.22). Findings suggest that future studies should explore relations between self-reported and objectively measured safety barriers to Hispanic youth walking and cycling.

Design And Experimental Validation Of Continuous Dna Separation Using Itp-Based Microfluidic Device, Nora C. M. Goscinski, Mary E. Rosa, Elizabeth K. Wheeler, Maxim Shusteff

Chemistry and Biochemistry

We have demonstrated a chip-based microfluidic device suitable for rapid and high-throughput DNA separation and purification for downstream analysis. The glass-based device incorporates a transverse free-flow isotachophoresis (tFF-ITP) that overcomes the volume limitations of CE approaches, and allows continuous sample processing in contrast to batch-mode solid-phase extraction (SPE). The device is able to focus DNA at flow rates up to 100 uL/min, and sample conductivity up to 2 mS/cm. Downstream of the chip, 30-40% of DNA from the input sample is recovered as a result of ITP focusing, and preliminary results indicate that this design is able to purify DNA …

Should Electrical Apprentices Study More Mathematics, David Lalor

Conference papers

The Department of Electrical Services Engineering, formerly known as the Installation Department, Kevin St., train Electrical Apprentices to become Qualified Electricians, has recently started to award Degrees in Electrical Services Engineering which includes the built environment. These students come from CAO applicants and from phase 6 students who have passed through the school. It is a popular and well subscribed course. I am involved in teach Phase 4 and 6. To progress to phase 6, phase 4 students must pass four examinations of which Electric Science is by all accounts the most difficult. To qualify as Electricians phase 6 also …

Application Of Drum-Buffer-Rope Methodology In Scheduling Of Healthcare System, Arefeh Mohammadi, Emmanuel S. Eneyo

Durham School of Architectural Engineering and Construction: Faculty Publications

Theory of constraints (TOC) is a management philosophy that seeks to increase throughput (efficiency or performance) of the system by identifying those processes that are constraining the system bottlenecks. There have been very few profound studies of TOC in health care systems. In order to fill this gap, this study was conducted to determine how healthcare systems are utilizing components of TOC to schedule operations and what results are being obtained. This is done by using a patient flow model for a radiotherapy section of a hospital. The drum-buffer-rope (DBR) was used as the methodology for scheduling this flow. Successful …

Effects Of Inclusion Shapes Within Rigid Porous Materials On Acoustic Performance, Hyun Hong, Siu-Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The present study investigates the influence of various shapes of inclusions having same volume embedded in a porous rigid material. Previous studies showed improvement of the broadband sound absorption with particular shapes of inclusions. However, different volumes of the inclusions have been considered; therefore, the bulk densities are not the same for comparison. The present study extends the investigations of inclusions in porous materials with same volume (or bulk density) to eliminate the influence by the change of bulk density. The effects of shape will be discussed. Finite element modeling will be used for this study. Total four different shapes: …

Effects Of Roof Pitch On Air Flow And Heating Load Of Sealed And Vented Attics For Gable-Roof Residential Buildings, Shimin Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

Pitch value is an important consideration in residential gable roof design and construction. However, how roof pitch, coupled with air flows in attic space, affects the energy performance of building attics has been barely investigated. In this paper, a 2D unsteady computational fluid dynamics (CFD) model is employed to investigate the effects of roof pitch on air flow and heating load of both sealed and vented attics for gable-roof residential buildings. The simulation results show that air flow in the sealed attics is steady and asymmetric, while that in the vented attics is a combination of an essentially symmetric base …

Economic Modeling & Optimization Of A Region Specific Multi-Feedstock Biorefinery Supply Chain, William H. Faulkner

Theses and Dissertations--Manufacturing Systems Engineering

The objective of this thesis is to include strategic and tactical level decisions into the biorefinery supply chain design for a specific region while comparing multiple conversion technologies and biomass feedstocks. The allocation of biomass feedstocks, products, and the respective supply chain configuration locations are determined while ensuring the regions monthly biomass availability and product market demand constraints are met. This research considers all actions required to bring the bio-based products to market from harvesting, storing, and processing the biomass to market distribution. Two different conversion technologies are chosen for comparison: one advanced conversion technology and one conventional technology. Potential …

A Directionally Tunable But Frequency-Invariant Beamformer On An Acoustic Velocity-Sensor Triad To Enhance Speech Perception, Yue Ivan Wu, Kainam Thomas Wong, Xin Yuan, Siu-Kit Lau, Shiu-Keung Tang

Durham School of Architectural Engineering and Construction: Faculty Publications

Herein investigated are computationally simple microphone-array beamformers that are independent of the frequency-spectra of all signals, all interference, and all noises. These beamformers allow the listener to tune the desired azimuth-elevation “look direction.” No prior information is needed of the interference. These beamformers deploy a physically compact triad of three collocated but orthogonally oriented velocity sensors. These proposed schemes’ efficacy is verified by a jury test, using simulated data constructed with Mandarin Chinese (a.k.a. Putonghua) speech samples. For example, a desired speech signal, originally at a very adverse signal-to-interference-and-noise power ratio (SINR) of -30 dB, may be processed to become …

Teaching Sustainable Design Using Bim And Project-Based Energy Simulations, Zhigang Shen, Wayne Jensen, Tim Wentz, Bruce Fischer

Durham School of Architectural Engineering and Construction: Faculty Publications

The cross-disciplinary nature of energy-efficient building design has created many challenges for architecture, engineering and construction instructors. One of the technical challenges in teaching sustainable building design is enabling students to quantitatively understand how different building designs affect a building’s energy performance. Concept based instructional methods fall short in evaluating the impact of different design choices on a buildings’ energy consumption. Building Information Modeling (BIM) with energy performance software provides a feasible tool to evaluate building design parameters. One notable advantage of this tool is its ability to couple 3D visualization of the structure with energy performance analysis without requiring …

Creating A State-Wide Transfer Program For Engineering Technology And Technology Management Studies, Gregory Arbuckle, Mark Doggett

SEAS Faculty Publications

The primary purpose of the Western Kentucky Pipeline for 2+2+2 Engineering Technology and Technology Management (ET/TM) students program is to significantly increase degree production and workforce preparation in central and western Kentucky through the construction of a long-term sustainable, reproducible model bridging program of cooperation between Western Kentucky University (WKU), Murray State University (MSU) and the Kentucky Community and Technical College System (KCTCS). The program will significantly increase industrial and technology education opportunities, technology enrollment and two and four-year degree completion. Additionally, this project supports the Kentucky Council on Postsecondary Education’s (CPE) goal to double the overall number of undergraduate …

Perceptions And Rankings Of Technology Management Competencies, Mark Doggett, Pam Mcgee, Sophia Scott

SEAS Faculty Publications

According to Thamhain (2005) the “Management of technology is the art and science of creating value by using technology together with other resources of an organization” (p. 6). A technology manager should have some minimum level of technical knowledge, applied abilities in systems design, application, products or processes, and skills in one or more contextual areas (ITEA, 2000/2002). Technology managers must have certain competencies that are agreed-upon or measurable, preferably both. At the university level, technology management programs are distinctly different from engineering or engineering technology programs (i.e., mechanical, electrical, civil, etc.). A required management curriculum is what distinguishes ATMAE …

The Theological Origins Of Engineering, Brad Kallenberg

Theology and Religious Studies Faculty Publications

Knowledge of our roots can sometimes help us figure out how we ought to proceed. Many claim that engineering began in ancient antiquity with the Egyptian pyramids, Archimedes' inventions, or the Roman aqueducts. Others give contemporary engineering a more recent history, tracing its origins to the Industrial Revolution or the Enlightenment. Yet what is often overlooked is the fact that contemporary engineering owes part of its identity to medieval monasticism.

The advantage of remembering this history is the bearing it has on the questions "What is engineering for?" and "How ought engineering be practiced?"

Michael Davis makes the claim that, …

Fact Or Fiction?, Allison Marsh

Section 5: Imaging at the Nano Scale

No abstract provided.

Spotlight On Usc: Department Of Art, Allison Marsh

Section 5: Imaging at the Nano Scale

No abstract provided.

Usc's Nanocenter, Allison Marsh

Section 5: Imaging at the Nano Scale

No abstract provided.

Art Versus Image, Allison Marsh

Section 5: Imaging at the Nano Scale

No abstract provided.

Nano Imaging, Allison Marsh

Section 5: Imaging at the Nano Scale

No abstract provided.

What Is Nanotechnology?, Allison Marsh

Section 5: Imaging at the Nano Scale

No abstract provided.

Nanotechnology In Everyday Life, Allison Marsh

Section 5: Imaging at the Nano Scale

No abstract provided.