Other Engineering Commons^™

Correlation Of Shear Strength Between Longitudial And Transverse Specimens, Erasto A. Fernandez

LSU New Orleans Theses and Dissertations

In this thesis, new methods for shear strength are proposed and backed up through extensive experimentation, ABAQUS models and data analysis of Titanium welds of three different alloys. The results are compared with those obtained by using the procedure outlined by AWS B4 for calculating Shear Strength in the transverse and longitudinal directions; this equation is widely used by the American Welding Society (AWS) and all those in search of more efficient designs involving welding.

It is a well-documented issue that the equation provided by AWS yields a large discrepancy between the values for shear strength of longitudinal and transverse …

Assessing The Engineering Performance Of Affordable Net-Zero Energy Housing, Jordan P. Wallpe

Purdue Polytechnic Masters Theses

The purpose of this research was to evaluate affordable technologies that are capable of providing attractive, cost-effective energy savings to the housing industry. The research did so by investigating the 2011 Solar Decathlon competition, with additional insight from the Purdue INhome. Insight from the Purdue INhome verified the importance of using a three step design process to design a net-zero energy building. In addition, energy consumption values of the INhome were used to compare and contrast different systems used in other houses.

Evaluation of unbiased competition contests gave a better understanding of how a house can realistically reach net-zero. Upon …

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

Newsletter 44 Issue 1 - Spring 2011 - Nuts And Bolts

Friends of the Larsen Tractor Museum

No abstract provided.

Newsletter 42 Issue 2 - Summer 2010 - Nuts And Bolts, Tractor Museum

Friends of the Larsen Tractor Museum

No abstract provided.

Edwards Automation Final Project Report, Benjamin (Ben) Johnson, Joel Masters, Matthew (Matt) Stewart

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

Laser Clean Room Re-Design: A Manufacturing Facility Re-Layout, Jennifer J. Siu

Industrial and Manufacturing Engineering

Alcon’s Laser Clean Room fosters inefficient production practices, is outdated for its current process, and lacking in clear process/product flow. A facility re-design is applied to bring order, efficiency, and optimize flow in the laser production lines.

Deliverables include a new layout that decreases product travel distances and increases productivity as well as an implementation plan and cost/savings analysis. Major design decisions include downsizing the clean room, sorting to find waste and establishing clear process/product flows. The design was implemented within three weeks and results yield 29% reduction of product travel distance, 10.4 hrs/day saved from eliminated gowning time and …

Newsletter 41 Issue 1 - Spring 2010 - Nuts And Bolts, Larsen Tractor Museum

Friends of the Larsen Tractor Museum

No abstract provided.

Wave Energy Converter Performance Modeling And Cost Of Electricity Assessment, Dmitri Jarocki

Master's Theses

California is experiencing a rapid increase in interest for the potential of converting ocean waves into clean electricity. Numerous applications have been submitted for the permitting of such renewable energy projects; however the profitability, practicability, and survivability have yet to be proven. Wave energy conversion technology has steadily matured since its naissance in the 1970’s, several wave energy power installations currently exist, and numerous plans for commercial power plant are in the works on the shores of multiple continents. This study aims to assess the economic viability of two proposed commercial wave energy power plant projects on the Central California …

Nuts And Bolts - Ltm Newsletters, Tractor Museum

Friends of the Larsen Tractor Museum

Newsletters published by the Larsen Tractor Museum in 2010

Where do we grow from here? by Curt McConnell, editor

Chris Ford has big plans for small groups in 2010 by Curt McConnell, editor

News from Exhibits by Luis Vasquez, chair of collections committee

Engine comes together as Co-Op E3 progresses by Curt McConnell

Description of our Sound Level Measuring and Analyzing Equipment by Lou Leviticus

Development of conservation tillage methods by Bill Splinter, museum director

Curator's Report by Lou Leviticus

Associate Report by Jeremy Steele, museum associate

Obituary Note - Robert Kleis

Process Design For Aeration Of Facial Prosthetic, Nathaniel J. Urciuoli

Industrial and Manufacturing Engineering

Facial prosthetics are becoming a necessary step for the recovery of injured veterans and civilians who have suffered severe facial burning. Current users of such prosthetics are not able to wear the prosthetic for an extended period of time due to uncomfortable conditions created by the silicone material. A solution for this problem was to develop a process for creating small holes similar to skin pores that will both ventilate and aid in the evaporation of accumulated sweat under the prosthetic.

The main steps of this process were to create a flexible fixture capable of supporting and securing the prosthetic …

Design Of A Low Cost Powered R/C Combat Airplane And Manufacturing Plan, Jonathan N. Bailey

Industrial and Manufacturing Engineering

The goals of this project are to design a low cost powered remote control combat airplane capable of outdoor flight, named the Aero EX and to develop a manufacturing plan to produce each unit at a selling price of $200, while operating at a 25 vehicle batch rate inside a 1,000 square foot facility. These goals are achieved using: Aerospace fundamentals to design the vehicle, Design for Manufacturability to optimize the design for minimal use of labor, Design for Assembly to give consumers the ability to build the vehicle without fixtures, Pull production to eliminate scheduling and match customer demand. …

Design For Manufacturing Of Sports Equipment, Cedrick Bit, Christopher L. Head

Industrial and Manufacturing Engineering

The purpose of this project was to validate industrial designs for a product in its conceptual stage and suggest/implement design changes that suit the contracting company’s needs while assuring the product maintains its basic functional requirements. Techniques and methods used to validate the design include 3‐D solid modeling, physical product application using rapid prototyping to produce the product. Methods of design for manufacturing were analyzed in the design. Processes used in the validation and verification of the design include solid modeling design, methods of measurements, fixture design and manufacturing processes. Full design specifications and solid model files were finalized and …

Newsletter 43 Issue 3 - Fall 2010 - Nuts And Bolts

Friends of the Larsen Tractor Museum

No abstract provided.

Design And Manufacture Of Tennis Ball Retriever, Philip Hurst

Industrial and Manufacturing Engineering

No abstract provided.

Design, Reconstruction And Evaluation Of A Dynamometer For Quarter Scale, Samuel Sanchez

BioResource and Agricultural Engineering

This project discusses the design, reconstruction, and evaluation of a dynamometer. A new test stand for the Quarter Scale team would improve the testing of the engines and the Continuously Variable Transmission (CVT). All the readings will be done electronically in order to provide the most accurate data collection. The dynamometer will be a closed hydraulic system for ease of use. This system will be able to test all of Quarter Scale engines. The data collected will be used to determine which engines are in the best condition, and which may need to be fixed. With the new design, the …

October 2009, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Agenda, minutes, treasurer report, director report, docent report, associate report, activities report, test lab report

Development Of Guidelines For Deformable And Rigid Switch In Ls-Dyna Simulation, Ling Zhu

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

LS-Dyna simulations have been widely used in research and design to reduce fiscal and time costs. In order to improve the simulation’s efficiency, the components which experience negligible deformations are usually modeled as rigid bodies. However, the use of rigid bodies is always restricted. Though the use of more rigid bodies can save computing resources for a particular simulation, less rigid bodies are preferred for building a model in order to broaden its applications. Meanwhile, if a simulation task has multiple events, the application of rigid bodies in the particular simulation is always minimized so that it can satisfy all …

Development Of A Theoretical Decoupled Stirling Cycle Engine, Barry Cullen, Jim Mcgovern

Conference Papers

The Stirling cycle engine is gaining increasing attention in the current energy market as a clean, quiet and versatile prime mover for use in such situations as solar thermal generation, micro cogeneration and other micro distributed generation situations. A theoretical Stirling cycle engine model is developed. Using a theoretical decoupled engine configuration in which working space swept volume, volume variation, phase angle and dead space ratio are controlled via a black-box electronic controller, a model is developed that is to be used as a tool for analysis of the ideal Stirling cycle engine and the limits on its real world …

Newsletters Of First 10 Years, Tractor Museum

Friends of the Larsen Tractor Museum

Newsletters distributed to supporters of the Larsen Tractor Museum.

1998 Spring Newsletter 1 - Non-profit Status, Dedication of Museum, Nebraska Tractor Test Law Beginnings

1998 Winter Newsletter 2 - First Annual Meeting, Library Established, State Fair Report, Winnepeg Plowing Contests

1999 Spring Newsletter 3 - Nebraska State Museum Affiliation, Fundraising Goals, Fuel Saving Devices in the 1920s

1999 Fall Newsletter 4 - Museum Studies Luis Vasquez, Tractor Raffle, Renovation Goals, Fundraising Goals, Annalyzing Tractor Test Results

1999 Winter Newsletter 5 - Mission Statement, Logo and Letterhead, Tractor Storage Facility, Bylaw Amendments, Hand Tool History, The Davidson Traction Dynamometer

2000 Spring …

Preparation And Accreditation Of Level 7 Engineering Programmes, Mark Mcgrath

Conference Papers

Accreditation of 3^rd level educational programmes by a suitably recognised professional body is of particular relevance in relation to engineering. The completion of a sequence of modules which leads to the attainment of this professionally recognised award is viewed as integral to the undertaking. The engineering technology fields are developing and expanding rapidly and the third level sector must keep abreast of these changes. This is essential if the third level institutions wish to continue delivering programmes which produce graduates who can successfully complete the transition from 3rd. Level to the various engineering sectors.

This paper outlines various aspects …

Derivation And Application Of A Conserved Orbital Energy For The Inverted Pendulum Bipedal Walking Model, Jerry E. Pratt, Sergey V. Drakunov

Publications

We present an analysis of a point mass, point foot, planar inverted pendulum model for bipedal walking. Using this model, we derive expressions for a conserved quantity, the “Orbital Energy”, given a smooth Center of Mass trajectory. Given a closed form Center of Mass Trajectory, the equation for the Orbital Energy is a closed form expression except for an integral term, which we show to be the first moment of area under the Center of Mass path. Hence, given a Center of Mass trajectory, it is straightforward and computationally simple to compute phase portraits for the system. In fact, for …

Windmill Documentary, Timothy David Stoltenburg

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

Order And Disorder, Entropy In Math, Science, Nature And The Arts, Sol Neeman Ph.D., Arie Maharshak

Engineering Studies Faculty Publications and Creative Works

Often, science and engineering students have difficult time in viewing certain concepts in their holistic form. An example for such a concept is the concept of Entropy. Although it originated from the field of thermodynamics, the relation between order and disorder is a profound one and manifests itself in various fields, sometimes unrelated, such as math and science, nature and the arts. In the discipline of physics, the amount of disorder in a system has been quantified by the concept of Entropy. In the area of information theory it provides a quantitative measure of the amount of compression that may …

The Frequency Distribution Of Quantization Error In Digitizers For Coherent Sampling, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

In this paper the frequency distribution of quantization error in coherent sampling of digitizers will be investigated. As the distribution of the quantization error affects the values of THD and SNR, it is relevant for a correct interpretation of THD and SNR of sine waves in coherent sampling. The distribution of the quantization error will be analyzed as a function of N, total number of samples and M, number of cycles in the sample set and it will be proved that for certain cases, the quantization error falls on odd harmonics only of the frequency of the sampled sine wave.

Application Of Wavelets And Principal Component Analysis In Image Query And Mammography, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Breast cancer is currently one of the major causes of death for women in the U.S. Mammography is currently the most effective method for detection of breast cancer and early detection has proven to be an efficient tool to reduce the number of deaths. Mammography is the most demanding of all clinical imaging applications as it requires high contrast, high signal to noise ratio and resolution with minimal x-radiation. According to studies [36], 10% to 30% of women having breast cancer and undergoing mammography, have negative mammograms, i.e. are misdiagnosed. Furthermore, only 20%-40% of the women who undergo biopsy, have …

Combining Wavelets And Hotelling Transforms In Image Query, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

In the "content based" image query, also referred to as "query by example," "similarity retrieval" or "sketch retrieval," the query image is provided by the user either as a sketch of the object, as the output of a scanner or a video camera. Some of the difficulties associated with content based image query are described in [1], e.g. significant difference between the "query image" and the "target image," artifacts and poor resolution of the query image make a straightforward comparison of images using L1 and l2 metrics not effective.

In [2] a new strategy is suggested based on wavelet decomposition …

Arts, Computers And Artificial Intelligence, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Science and art seem to belong to different cultures. Science and technology, mainly the products of the intellect, use terminology and vocabulary that are concise and well defined. In contrast, in artistic expression, ambiguity is a powerful component. Still the relationship between these two different categories of human activity is interesting and fascinating. In this paper, a general comparison of these two disciplines will be introduced. Then the possibility of mechanical creation of art using computers and artificial intelligence will be discussed. This will be followed by two techniques which are used to create poetry and music. First, a statistical …

Incorporating Matlab's Signal Processing Toolbox Into A Dsp Course At An Undergraduate E.E. Program, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

This paper provides some suggestions for incorporating MATLAB's Signal Processing Toolbox into a DSP course. Often, in a DSP course, students have difficulties understanding abstract and non-intuitive concepts and seeing their relevance to the practical part of their curriculum. The tools offered by MATLAB's Signal Processing Toolbox, can help to make these concepts more tangible and provide a perspective for students. Some basic tools relevant to an undergraduate DSP course will be introduced, including examples of tool use and graphic results. The tools presented will be applied in the areas of synthesis and analysis of signals, FFT computation, impulse response …

Using Matlab To Illustrate The 'Phenomenon Of Aliasing', Sol Neeman, Ph.D.

Engineering Studies Faculty Publications and Creative Works

The phenomenon of aliasing is important when sampling analog signals. In cases where the signal is bandlimited, one can avoid aliasing by ensuring that the sampling rate is higher than the Nyquist rate . But in cases where the signal is not bandlimited , aliasing is unavoidable if the signal is not filtered before it is sampled. It is then crucial to understand the phenomenon in order to estimate the distortion generated when the signal is reconstructed from its samples. Using the software package MATLAB by MathWorks, Inc ., two examples are presented. The first is a pure sinusoid which …