Other Engineering Commons^™

Comparative Analysis Of Risk-Based And Time-Based Inspection Application In Hydrocarbon And Chemical Industries: A Review, Azizar Azizar, Nofrijon Sofyan

Journal of Materials Exploration and Findings

RBI and TBI strategies are comparatively reviewed in terms of their contribution to maintaining asset integrity for asset owners in the hydrocarbon and chemical industries. The objective is to assess various methods on a cost-efficient and risk-managed operational safety basis. It utilizes common industry standards such as API 580 for RBI, and API 510, API 570, and API 653 for TBI, and also case studies and literature analysis. The analysis of data was conducted to examine how each approach deals with inspection planning and decision-making. They suggest that RBI's risk-based prioritization strategy leads to more effective management of high-risk assets, …

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Toward Electrochemical Detection Of Salmonella Enterica Serovar Enteritidis On Hydroponically Grown Green Onions (Allium Fistulosum L.), Lisseth Casso-Hartmann

All Theses

The Food and Drug Administration (FDA) established standards during the growing, harvesting, packing, and holding of produce for human consumption as part of implementing the Food Safety Modernization Act (FSMA). One of the main requirements for farmers is to detect environmental pathogens such as Salmonella enterica species in water and sprout samples. S. enterica is a bacterium of significant concern due to its pathogenicity and ability to survive and persist in diverse environmental conditions. S. enterica has been associated with recalls in ready-to-eat foods. Traditional detection methods include Enzyme-Linked Immunosorbent Assay (ELISA), Polymerase Chain Reaction (PCR), and plate counting, which …

Implementation Of Machine Learning Using Deep Neural Networks To Estimate The Failure Risk Caused By Leakage In Pressure Relief Devices, Adi Yudho Wijayanto, Yossi Andreano, M. Ali Yafi Rizky, Dedi Priadi

Journal of Materials Exploration and Findings

The primary objective of deploying Pressure Relief Device (PRD) equipment is to ensure the safety of pressure vessels within a pressurized system. Over time, PRD equipment may degrade and fail to perform its intended function, which must be identified as a failure mode. To mitigate potential risks associated with this, it is recommended that an approach such as risk-based inspection (RBI) be implemented. Despite the widespread adoption of RBI, the method relies on qualitative techniques, leading to significant variations in equipment risk assessments. This study proposes a novel risk analysis method that uses deep learning-based machine learning to develop a …

Maintenance Notes To Improve The Reliability Of Wheel Flange Failure For Overhead Crane, Fakhri Burhanuddin, Akhmad Herman Yuwono

Journal of Materials Exploration and Findings

Overhead traveling cranes in the industry have utility workload classifications and require high standards of safety and reliability by mobilizing lifting and transporting capacity variants of steel products, equipment, and other supports. The crane wheels are the main support in moving the end carriage so that the crane can work according to its function. Failures in the operation and maintenance cycle have occurred. Therefore, proper repair and maintenance methods are highly needed to restore the original design function to its working integrity. Logic tree analysis was used to breakdown all causes of failure; thus, mitigation was performed by carrying out …

Root Cause Analysis Of Leakage Tube Boiler: A Study Case, Lydia Kartika Basaria Sitompul, Dedi Priadi

Journal of Materials Exploration and Findings

Oil and gas industry can have catastrophic implications for human life, the environment, and the economy. This paper investigated failure analysis using root cause analysis especially for boiler tube leakage of Heat Exchanger. Identify the issue using microscopic examination and energy dispersive x-ray analysis were conducted on the tube inside and outside surface to determine root cause of the failure. The formation of a protective film in the aluminum-brass tube during the starting stage is very important for ensuring adequate film protection throughout the service life of the heat exchanger. During this stage, exposure to unpolluted water is essential. The …

Lifetime Prediction Of Pan Feeder Based On 3d Laser Scanning For Wear Assessment, Nony Maulidya, Dedi Priadi, D. Rizal Asral

Journal of Materials Exploration and Findings

Apron feeder is one of stages in crushing circuit to convey material in short distance. Pan flight is the main component of apron feeder that is severely exposed to wear mechanism due to its direct contact with open cut abrasive ore. With this operating environment of apron feeder, regular maintenance and inspection must be conducted to assess wear rate of pan’s surface to maintain equipment availability and provide information and sign before the equipment undergoes severe and sudden degradation. 3D laser scanning is method used in this study as Non-Destructive Testing (NDT) based inspection. The aim of using 3D scanning …

Fabrication And Characterization Of A Monolithic Photonic Integrated Circuit With High-Aspect Ratio Photonic Device Structures, Sami A. Nazib

Optical Science and Engineering ETDs

The focus of this work was to create a process to fabricate an InP-based Photonic Integrated Circuit (PIC). The design of the PIC required the photonic components of this device to be created by deep etching of an epitaxially-grown multilayer structure. Therefore, a novel dry etching process was developed to produce very high aspect- ratio (HAR) features. This process not only involved the development of dry etch chemistry but also the engineering of a metal mask structure. The next step of the challenge was to use a polymer-based material that would have two functions: cladding for the etched photonic components …

Optical Responses Of Hybrid Electromagnetic Nanostructures, Dominic Bosomtwi

Optical Science and Engineering ETDs

Fano resonances result from the interference between a broad background and a narrow state, producing asymmetric scattering profiles. Under specific conditions, destructive interference collapses the Fano resonance width, leading to bound states in the continuum (BICs) that localize light within a nanostructure while maintaining an infinitely high-quality factor (Q-factor).

This dissertation explores the design of nanostructures with multilayer hybrid plasmonic-dielectric metasurfaces using full-wave numerical simulations, facilitating multiple Fano resonances and BICs. By adjusting nanoantenna dimensions, multiple modes are excited at plasmonic-dielectric interfaces, leading to strong interactions and hybridization of energy levels, manifested as Rabi splitting.

These findings enable advancements in …

Effects Of Ti Addition On The Characteristics Of Al-10zn-6mg-2si/Zro2 Composites Produced By Squeeze Casting, Qesha Diva Prameshvara, Pipin Indah Lestari, Bondan Tiara Sofyan

Journal of Materials Exploration and Findings

Metal matrix composite (MMC) with 7xxx aluminum matrix is potential for ballistic applications due to the combination of strength, toughness, and light weight. Previous study successfully produced aluminum-based composites with SiC particles which were able to stop type III bullet, however cracks remained on back of the plate. Therefore, in this research, SiC was replaced by zirconia (ZrO₂) due to its high fracture toughness. Ti-B grain refiner was added to further improve toughness through grain boundary strengthening mechanism. This research developed 5 vol.% ZrO₂ strengthened Al-10Zn-6Mg-2Si composite with addition of Al-5Ti-1B grain refiner produced through squeeze casting …

Integration Of The Ashby Technique And Pahl-Beitz Quantitative Ranking For Railway Axle Material Selection, Helya Chafshoh Nafisah, Jaka Fajar Fatriansyah, Siti Norasmah Surip

Journal of Materials Exploration and Findings

Railway axle serves as a vital connection between the train's wheels and its body. However, cyclic loading and high speed can induce fatigue in railway axle, which potentially leads to damage human safety. Therefore, it is important to find materials that have good mechanical properties with the lowest weight and cost. In this paper, a comprehensive method using Ashby chart has been performed to select candidate materials of railway axle. The methods begin with analyzing function by determining the problem, objective function, and constraints. After that, the results obtained are ranked using Pahl and Beitz quantitative weighting method. The results …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

Mbe Growth Of Sb Based Alloys Using Interfacial Misfit Arrays For Mwir Devices, Fatih Furkan Ince

Optical Science and Engineering ETDs

This thesis explores the monolithic integration of antimonide based narrow bandgap semiconductors on commercially available substrates for mid-wave infrared (MWIR) devices. The research focuses on the integration and growth of antimonide based alloys using the interfacial misfit dislocation (IMF) arrays to enhance the cost efficiency, manufacturability and performance. The study particularly investigates the relaxation mechanisms of antimonide alloys on InAs and InP substrates, assessing the impact of mismatch strain on the quality of epilayers. The IMF arrays are examined using high-resolution transmission electron microscopy (HR-TEM) and x-ray diffraction (XRD), revealing information about the effective strain relief mechanisms behind IMF arrays …

A Bayesian Approach For Lifetime Modeling And Prediction With Multi-Type Group-Shared Missing Covariates, Hao Zeng, Xuxue Sun, Kuo Wang, Yuxin Wen, Wujun Si, Mingyang Li

Engineering Faculty Articles and Research

In the field of reliability engineering, covariate information shared among product units within a specific group (e.g., a manufacturing batch, an operating region), such as operating conditions and design settings, exerts substantial influence on product lifetime prediction. The covariates shared within each group may be missing due to sensing limitations and data privacy issues. The missing covariates shared within the same group commonly encompass a variety of attribute types, such as discrete types, continuous types, or mixed types. Existing studies have mainly considered single-type missing covariates at the individual level, and they have failed to thoroughly investigate the influence of …

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil

Theses and Dissertations

This multidisciplinary study aimed at investigating the impact of incorporating graphene oxide (GO) on the mechanical properties and electromagnetic (EM) shielding effectiveness of cementitious mixtures, as well as critically examining the mechanism with which GO affects their microstructure properties. Analysis of the literature review showed that there are discrepancies in reporting the impact of GO on the mortar mix. Consequently, this study focuses on exploring the cause for such discrepancies and identifies three main factors which are thoroughly investigated. The factors were the different sonication energies applied to the GO (Shear Mixing, 1.5 kJ/ml, 3 kJ/ml and 6 kJ/ml), the …

Machine-Learning-Assisted Design Of Deep Eutectic Solvents Based On Uncovered Hydrogen Bond Patterns, Usman Lame Abbas, Yuxuan Zhang, Joseph Tapia, Md Selim, Jin Chen, Jian Shi, Qing Shao

Markey Cancer Center Faculty Publications

Non-ionic deep eutectic solvents (DESs) are non-ionic designer solvents with various applications in catalysis, extraction, carbon capture, and pharmaceuticals. However, discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation. The search for DES relies heavily on intuition or trial-and-error processes, leading to low success rates or missed opportuni- ties. Recognizing that hydrogen bonds (HBs) play a central role in DES formation, we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning (ML) models to discover new DES systems. We first analyze the …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, D. Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Mechanical Characterization Of Functionally Graded M300 Maraging Steel Cellular Structures, Bradley Jay Sampson

Theses and Dissertations

Traditional methods for increasing the energy absorption of a structure involve using a stronger material or increasing the volume of the structure, resulting in a higher cost or additional weight. Additive manufacturing (AM) can be used to maximize the energy absorption of materials with the ability to create complex geometries such as cellular structures. Previous work has shown that the energy absorption of additively manufactured parts can be improved through functionally graded cellular structures; however, this strategy has not been applied to ultra-high strength steel materials. This work characterizes the effect of multiple functional-grading strategies (e.g. uniform, rod-graded, size-graded) on …

A Review On Ship Recycling Industry In Bangladesh From Global Perspective, Ahammad Abdullah, Zobair Ibn Awal, M Ziauddin Alamgir, Md. Jobayer Mia, Farihatul Mim, Utpal K. Dhar

Journal of Ocean and Coastal Economics

At present, the global center of the ship breaking and recycling industry is in South Asia, specifically Bangladesh, India, and Pakistan. These three countries account for 70–80 percent of the international recycling market for ocean-going vessels, with China and Turkey covering most of the remaining market. Only about 5 percent of global volume is scrapped outside these five countries. Bangladesh has environmentally beneficial coastal region and affordable labor that make the shipbreaking and recycling business as a potential sector for the country. In addition, ship recycling and its related businesses are helping to solve our nation’s unemployment issues at all …

Design And Characterization Of A Novel Eef2k Degrader With Potent Therapeutic Efficacy Against Triple-Negative Breast Cancer, Changxin Zhong, Rongfeng Zhu, Ting Jiang, Sheng Tian, Xiaobao Zhao, Xiaoya Wan, Shilong Jiang, Zonglin Chen, Rong Gong, Linhao He, Jin-Ming Yang, Na Ye, Yan Cheng

Markey Cancer Center Faculty Publications

Dysregulated eEF2K expression is implicated in the pathogenesis of many human cancers, including triple-negative breast cancer (TNBC), making it a plausible therapeutic target. However, specific eEF2K inhibitors with potent anti-cancer activity have not been available so far. Targeted protein degradation has emerged as a new strategy for drug discovery. In this study, a novel small molecule chemical is designed and synthesized, named as compound C1, which shows potent activity in degrading eEF2K. C1 selectively binds to F8, L10, R144, C146, E229, and Y236 of the eEF2K protein and promotes its proteasomal degradation by increasing the interaction between eEF2K and the …

Sustainable Diamond-Like Carbon Fabricated Gravure Cylinders For Printing Fine Lines Of Electrodes And Graphic Structures, Chandramohan Seetharamiah Srinivasaraju

Dissertations

The main objective of this work is to evaluate the potential of Diamond-Like Carbon (DLC) as an alternative to chrome for use on gravure cylinders. DLC coatings consist of carbon atoms, arranged into a diamond-like structure that closely resembles that of natural diamond. In contrast to chrome, DLC is environmentally friendly. The focus of the study is to determine the viability of DLC as a substitute material for chrome to be used on gravure cylinders by determining key material properties and evaluating printing performance.

In the first research paper, four DLC variants (Standard DLC, A-DLC, S-DLC, and Organic Silica) and …

Effect Of Heat Input On Microstructure And Mechanical Properties Of Submerged Arc Welded Sm570-Tmc Steel, Toni Yuhandri, Winarto Winarto, Diana Natalia

Journal of Materials Exploration and Findings

SM570TMC is high-strength steel (HSS), which is commonly used in structures that require higher-strength components. In this research, submerged arc welding (SAW)-welded SM570 TMC steels' microstructure and mechanical characteristics were examined. SM570 plates with 12mm thickness were multi-pass welded by using a 3.0 mm diameter of ESAB OK Autrod 13.40 (AWS A5.23: EG) filler metal. The joint design is a single V multi-pass butt weld with a backing strip. Two welded joints were prepared by using heat inputs of 2.2 and 2.9 kJ/mm. The microstructures of two welded joints were observed by using optical microscopy and scanning electron microscope (SEM). …

The Plastics Collection Reference Packet, Special Collections Research Center

Special Collections Research Center

This reference packet is an informational tool to support further research into the history of plastics—whether interested in companies, individuals within the plastics industry's history, historical plastics materials, essays, and more. All content featured within this packet was previously published on the former plastics.syr.edu website as part of a Syracuse University Libraries and Special Collections Research Center (SCRC) partnership established in 2007 with the Plastics Pioneers Association (PPA)—an association of plastics industry professionals interested in preserving the plastics industry's past.

Toward Low Carbon Footprint And Lightweight Masonry Alkali-Activated Material, Zina Ebrahim, Mohammad Mastali, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

The portland cement concrete industry and the masonry industry are undergoing changes in response to skilled labor shortages and concerns over climate and pollution. There may be interest from parts of the industry in lower carbon footprint and lightweight masonry products. Toward this aim, the use of hemp shiv--the woody core of the hemp plant--in alkali-activated concrete was investigated herein and shown to have a wide range of impacts on the hardened state characteristics of a material suitable for structural concrete masonry units (CMUs) in accordance with ASTM C90 requirements. Hemp shiv is well known for its use in hempcrete, …

Exploring Methods For Recycling Filament Waste In 3d Printing, Max Rios Carballo

Publications and Research

The goal of the current study is to investigate cutting-edge techniques for recycling filament waste from 3D printing procedures. Appropriate waste management techniques are required to reduce this trash's harmful environmental consequences. The goal of the project is to look at new methods for recycling filament waste in order to minimize disposal and encourage reuse. To acquire data from pertinent papers and research, a thorough literature review methodology was used. The findings show that this issue may be resolved utilizing a variety of recycling techniques, including shredding, melting, and re-extrusion. The type of filament waste and the intended goal will …

Development Of Dynamic Risk-Based Inspection Using Forward Difference Approach For Pipe Failure Due To Uniform Corrosion, Jaka Fajar Fatriansyah, Zahra Nadia Nurullia, Andreas Federico, Dedi Priadi

Journal of Materials Exploration and Findings

The oil and gas industry is one of the world's largest and most influential energy contributors. All aspects involved in the operation of this industry are fundamental to be reviewed and managed correctly, especially by preventing or minimizing the failures that could occur. Uniform corrosion is the most common component failure mechanism that can cause failure in the oil and gas industry. The company's actions in managing and preventing the risk of this type of failure have a major role in the sustainability of the company due to the possibility of more significant impacts if the risk cannot be handled …

Structural Integrity Analysis Of The Rig Mast Following Repair Of Two Diagonal Braces In The Upper Mast Section, Rendhatya Padmodwiputra, Johny Wahyuadi Soedarsono, Mirza Mahendra, Bambang Eka Satria, Chandra Arif, Eka Juni Suarthana

Journal of Materials Exploration and Findings

During a move to the new drilling location, two braces of the upper mast section on a 550 HP oil and gas rig was damaged. When damage is discovered, the rig operating company should conduct a risk analysis related to the damage using the standard used to determine rejection criteria and follow-up repairs. The strength of the rig mast is calculated using Finite Element Analysis (FEA) with initial conditions (before damage occurs) where all braces are installed and extreme conditions where neither brace is repaired. The calculation results are then used to assess the risk of reducing the rig mast …

Dynamic Rbi With Central Difference Method Approach In Calculation Of Uniform Corrosion Rate: A Casestudy On Gas Pipelines, M.Riefqi Dwi Alviansyah, Fernanda Hartoyo, Zahra Nadia Nurullia, Ari Kurniawan

Journal of Materials Exploration and Findings

The oil and gas industry generally uses a piping system to drain fluids. Even though the pipes used have been well designed, the use of pipes as a means of fluid transportation still provides the possibility of failure that can occur at any time, one of which is due to uniform corrosion. The use of standard Risk Based Inspection (RBI) according to the API RBI 581 document has been widely used to anticipate potential failures to pipe components. The use of standard RBI can reduce the risk of failure significantly. Because the standard RBI considers the component risk value to …

Investigation Of Gaas Double Heterostructures For Photonic Heat Engines, Nathan Giannini-Hutchin

Optical Science and Engineering ETDs

The creation of a laser cooled semiconductor device has been a long sought achievement. GaAs-based devices have emerged as a promising candidate for the realization of this goal. Efforts to improve the efficiency of such devices have enabled the material to exhibit external quantum efficiencies (EQE, a measure of the probability that an excitation leads to the emission of a photon) of 99.5\%. Despite this impressive feat, a laser coolable device remains elusive.

To investigate the obstacles to such a device, the material characteristics of GaAs-based double heterostructures (DHS) are theoretically and experimentally examined. Through this study, a GaAs $\vert$ …