Other Engineering Commons^™

Techno-Economic Analysis Of Implementing Carbon Capture And Storage (Ccs) At The Punagaya 2×100 Mw Coal Power Plant, Ricky Andreas Kristianto Siringoringo, Rahma Muthia, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The increase in greenhouse gases due to the combustion of fossil fuels is one of the major drivers of global warming and consequently drives the development of low-carbon technologies such as Carbon Capture and Storage (CCS). The aim of this study is to evaluate the technical and economical feasibility of the implementation of CCS technology in the Punagaya Subcritical Coal-Fired Power Plant (CFPP) 2×100 MW as a part of the energy transition strategy towards Net Zero Emissions (NZE) 2060. The simulation was carried out using Aspen HYSYS software, including coal combustion, CO₂ capture through MDEA-PZ solvent, dehydration, transportation, and storage …

Insect Inspired Behavioral Strategies For Improving Multi-Agent System Resilience In The Presence Of Contagious Faults, James E. Hand

Doctoral Dissertations and Master's Theses

As Multi-Agent Systems (MASs) become increasingly involved in every aspect of everyday life the need to maintain reliability and resilience within these systems grows. However, in equal measure bad actors wishing to maliciously control or alter these systems are growing in both scale and capability. Thus, there is a present need for control schemes and agent behaviors that provide security against these threats while also avoiding large degradation in system performance as a tradeoff. Current research has covered a wide breadth of avenues and strategies that provide measurable resilience to faulted agents. However, these strategies often require group consensus, specialized …

Deep Learning Based Control System For Multi-Zone Hvac Residential Buildings, Mohammad H. Z. Alghalayeeni

Mechanical Engineering Theses

Heating, ventilation, and air conditioning (HVAC) systems are major contributors to residential energy consumption. However, most homes continue to rely on single zone thermostat control, which regulates temperature based on a single sensor and cannot account for thermal variations across multiple rooms. This often leads to uneven thermal conditions and inefficient energy use in multi-zone residential buildings. This thesis presents a deep reinforcement learning based approach for improving HVAC zoning control through dynamic airflow distribution. A physics based multi zone thermal model of a residential house was developed to simulate heat transfer processes including conduction, convection, solar and internal heat …

Multi-Modal Tensor Fusion For Alzheimer’S Disease Recognition, Mason Li, Tiffany Le, Jiajing Huang, Yuxin Wen

Engineering Faculty Articles and Research

Accurate and early diagnosis of Alzheimer’s disease (AD) is critical for effective intervention, disease monitoring, and patient care. Traditional diagnostic approaches rely on a single modality, such as clinical assessments, neuroimaging, or genetic markers, which may fail to capture the complex, multifaceted nature of AD. Multimodal learning has therefore been explored to integrate complementary information across data sources. However, conventional fusion strategies, including early feature concatenation and late decision-level fusion, often model modalities independently and fail to capture high-order cross-modal interactions. To address these limitations, we propose a multimodal tensor fusion network (MTFN) that integrates heterogeneous data sources, including visual …

Automation And Habitat Development For A Space Based Marine Life Environment, Logan Trimmer, Alexander Hang

Harrisburg University Other Works

This project was a cross-collaboration between the Environmental Sciences and Advanced Manufacturing and Robotics programs for the company Monolith Space.

The goal of this project was to design an autonomous system to be able to track qualities of water in an aquaculture system designed to be sent to space.

Quantum Sensing Of Magnetic And Thermal Fields Using Nitrogen-Vacancy Centers On Spoof Surface Plasmon Waveguides, Maxwell Stonham

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nitrogen-vacancy (NV) centers in nanodiamonds are solid-state quantum defects capable of detecting magnetic fields and temperature at the nanoscale with high spatial resolution and optical addressability at room temperature. Their spin-dependent fluorescence enables optically detected magnetic resonance (ODMR), a technique widely used for quantum sensing. However, enhancing optical readout efficiency remains a critical challenge for scalable integration and various methods can be used to improve this.

This thesis explores a hybrid quantum sensing platform that integrates NV-based sensing with spoof surface plasmon waveguides designed to enhance optical excitation and emission efficiency through localized spoof plasmon modes supported by subwavelength corrugated …

User Interface And Watchstation Improvements Required For Multi-Vehicle Usv Operations, Val Schmidt, Joshua Bergeron

Faculty Publications

In October 2024, the University of New Hampshire and NOAA’s Uncrewed Systems Office embarked on a mapping mission in the Gulf of Maine, simultaneously operating two DriX Un-crewed Surface Vehicles. Goals of the project were focused on testing hypotheses related to concepts of operation, including the safety of operations, cognitive loading of operators, management of vehicle endurance, vehicle logistics, maintenance and field support, refueling and a host of others.

Design Considerations For Conversational Agents To Assess The Social-Emotional Well-Being Of Young Children In Low-Income South African Communities, Lucretia A. Williams, Elizabeth A. Ankrah, Catherine E. Draper, Caylee J. Cook, Franceli L. Cibrian, Jesus A. Beltran, Kimberley D. Lakes, Gillian R. Hayes

Engineering Faculty Articles and Research

A variety of digital technologies have been used to support early childhood development (ECD) programs in low-income South African communities. Even though technology has provided opportunities to increase access to health interventions, the lack of trust and socio-economic constraints under which these tools would need to work pose complex challenges. We examine home visitors’ work processes, experiences, and preferences of a conversational agent to support their work of administering social-emotional well-being assessments to young children ages 0-5. Analysis of the results of focus groups with 51 home visitors indicates the need for designing conversational agents that support ECD in the …

Generative Ai: Another Chapter Of Human-Machine Communication, Seungahn Nah, Patric R. Spence

Human-Machine Communication

This editorial introduces a special issue of Human-Machine Communication that explores how generative AI reshapes the communicative relationship between humans and machines. It highlights emerging research on technology use, education, interpersonal dynamics, and trust in AI-generated content, emphasizing that generative AI’s significance lies not in novelty but in the social negotiations it provokes around meaning, authority, and credibility.

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Spin Coater Design With Pid Algorithm Using Polynomial Regression Approach And Bias Tuning For Tio2 Deposition Process, Geo Surya Andika, Nofrijon Sofyan, Donanta Dhaneswara, Akhmad Herman Yuwono

Journal of Materials Exploration and Findings

The thin-film deposition technique using spin coating offers a cost-effective alternative to Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD). The spin-coating process requires precise control of the motor drive system to ensure that the rotational speed, measured in rotations per minute (RPM), aligns with the set point and remains stable. This study presents the design and development of a spin coater prototype to achieve uniform thin-film deposition. The control method employed utilizes a Proportional-Integral-Derivative (PID) algorithm, incorporating a polynomial approach with bias tuning. The PID control was chosen to achieve stable operation in a non-linear system. The performance …

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Liquid-Cooled Thermoelectric Modules: Potential For Efficient Water Harvesting Through Air Condensation, Bowo Yuli Prasetyo, Aindri Yuliane, Parisya Premiera Rosulindo, Fujen Wang

Makara Journal of Technology

Water is one of the essential natural resources for the sustaining life of all beings on this planet. In general, groundwater is used to meet daily needs, although the availability of this water source becomes a major concern, particularly in some areas with limited access to it. Air condensation is a solution for providing water in such areas. This study aims to explore the potential of utilizing the thermoelectric technology as an alternative solution for water provision. An experiment is conducted using a system consisting of single liquid-cooled thermoelectric cooling devices/modules (TECs). Three types/variants of TECs with different cooling capacities …

Movian: Advancing Human Motion Analysis With 3d Visualization And Annotation, Trudi Di Qi, Isaac Browen, David Zhang, Hector M. Camarillo-Abad, Franceli L. Cibrian

Engineering Faculty Articles and Research

Human motion analysis, including data visualization and annotation, is crucial for understanding human behavior and intentions during various activities, aiding in the development of innovative tools that support independent living. Current wearable sensing technology provides rich 3D spatial movement data but generates multimodal complex datasets that require specialized skills for effective analysis. Despite the need, limited research exists on tools for effective visualization and easy annotation of such complex motion data. MoViAn (Motion Data Visualization and Annotation) is an innovative 3D data analysis system offering enriched visual representations of 3D human motion data (e.g., gaze, hand movements), along with an …

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Digital Health Intervention For Children With Adhd To Improve Mental Health Intervention, Patient Experiences, And Outcomes: A Study Protocol, Nancy Herrera, Franceli L. Cibrian, Lucas M. Silva, Jesus Armando Beltran, Sabrina E. B. Schuck, Gillian R. Hayes, Kimberley D. Lakes

Engineering Faculty Articles and Research

Background

Attention Deficit Hyperactivity Disorder (ADHD) is the most prevalent childhood psychiatric condition with profound public health, personal, and family consequences. ADHD requires comprehensive treatment; however, lack of communication and integration across multiple points of care is a substantial barrier to progress. Given the chronic and pervasive challenges associated with ADHD, innovative approaches are crucial. We developed the digital health intervention (DHI)—CoolTaCo [Cool Technology Assisting Co-regulation] to address these critical barriers. CoolTaCo uses Patient-Centered Digital Healthcare Technologies (PC-DHT) to promote co-regulation (child/parent), capture patient data, support efficient healthcare delivery, enhance patient engagement, and facilitate shared decision-making, thereby improving access to …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Joint Modeling Of Degradation Signals And Time-To-Event Data For The Prediction Of Remaining Useful Life, Sebastian Brumm, Erik Linstead, Junde Chen, Narayanaswamy Balakrishnan, Yuxin Wen

Engineering Faculty Articles and Research

Accurate prediction of remaining useful life (RUL) for in-service systems plays an important role in ensuring efficient operation of industrial equipment and in preventing unexpected equipment failures. In this paper, we present a prognostic framework for real-time RUL prediction based on joint modeling of both degradation signals and time-to-event data. The proposed model employs a change point-based general path model to capture signal non-linearity and Neural network (NN) based Cox model to link the time-to-event data with the estimated degradation trend. An empirical two-step scheme for hyperparameter estimation is proposed to enhance prognostic accuracy. Furthermore, an efficient Bayesian model updating …

Phosphorene As A Chemical Nanosensor For Volatile Organic Compound Vapours - A Dft Outlook, Saravanan S

Theses and Dissertations

Based on the density functional theory framework, the structural stability of phosphorene allotropes and its various nanostructures are ensured. The various allotropes of phosphorene and its nanostructures such as nanosheets, nanoribbon and nanotubes are used as adsorbing materials for various volatile organic compounds (VOCs) such as alcohols, chloroform, amines and aldehydes. The results of adsorption energy are used to confirm physisorption or chemisorption of VOCs on phosphorene. In addition, the charge transfer outcome suggests whether phosphorene is acting as acceptor or donor of electrons upon interaction of target VOCs.

The electronic attributes such as band structure, projected density of states …

Fabrication And Characterization Of A Monolithic Photonic Integrated Circuit With High-Aspect Ratio Photonic Device Structures, Sami A. Nazib

Optical Science and Engineering ETDs

The focus of this work was to create a process to fabricate an InP-based Photonic Integrated Circuit (PIC). The design of the PIC required the photonic components of this device to be created by deep etching of an epitaxially-grown multilayer structure. Therefore, a novel dry etching process was developed to produce very high aspect- ratio (HAR) features. This process not only involved the development of dry etch chemistry but also the engineering of a metal mask structure. The next step of the challenge was to use a polymer-based material that would have two functions: cladding for the etched photonic components …

Ultrasonic Flow Meter Calibration Via The Internet Using An Analog-To-Digital Converter, Aliev Ravshan, A.U. Djalilov

Chemical Technology, Control and Management

The purpose of scientific research work is remote control of improving the metrological properties of the water flow measuring device. Therefore, the Arduino platform with an additional ESP8266 NodeMcu v3 and analog-to-digital converter, module was installed in the scientific article for automatic calibration/checking of ultrasonic flow meters used in irrigation networks. The module is integrated into a 32-bit microcontroller with low power consumption. The ESP8266 NodeMcu v3 module operates at 80 and 160 MHz clock frequencies, supports real-time operating system (RTOS), built-in Wi-Fi, and has a microstrip antenna on board. Through this, the data exchange between the computing equipment and …

Generative Data Augmentation: Using Dcgan To Expand Training Datasets For Chest X-Ray Pneumonia Detection, Ryan D. Maier

Master's Theses

Recent advancements in computer vision have demonstrated remarkable success in image classification tasks, particularly when provided with an ample supply of accurately labeled images for training. These techniques have also exhibited significant potential in revolutionizing computer-aided medical diagnosis by enabling the segmentation and classification of medical images, leveraging Convolutional Neural Networks (CNNs) and similar models. However, the integration of such technologies into clinical practice faces notable challenges. Chief among these is the obstacle of acquiring high-quality medical imaging data for training purposes. Patient privacy concerns often hinder researchers from accessing large datasets, while less common medical conditions pose additional hurdles …

Impact Force Helmet Device For Concussion Monitoring, Patrice Mulligan, Karina Mealey, Zack Borthwick, Benjamin Fick

General Engineering

To track head trauma in football, our device is placed inside a football helmet to measure both linear and gyroscopic (rotational) accelerations. These measurements are taken using an ADXL375 linear accelerometer and an LSM6DSOX accelerometer and gyroscope. The data from these sensors is processed and transmitted wirelessly by a SparkFun Thing Plus microcontroller to another SparkFun Thing Plus microcontroller connected to a laptop on the sidelines. Our program on the laptop stores the acceleration impact data into a .csv file for each player. If a likely concussive impact is detected, the program displays a popup warning. Testing results were promising …

Techno-Economic Analysis Of Solar Pv Systems Under Various Environmental Conditions, Ramkiran B

Theses and Dissertations

World Energy Council has predicted that the global electricity demand will peak in 2030. The need for renewable energy has grown rapidly due to the rising energy demand in this ever-growing population. Green house gas emissions are predominantly due to the energy generation and consumption of fossil fuels. On the other hand, fossil fuels supply nearly 74% of India's energy demand, making India one of the world's largest coal consumers.

According to World Resource Institute, India ranks fourth in the world in terms of carbon emissions. Investments in renewable energy sources and energy-saving technologies should be part of a solution …

Calculation Of Hydraulic Resistance Of A Tubular-Gridse Nozzle With Spiral Turbulizers, Nurmukhamedov Habibulla Sagdullaevich, Mavlonov Elbek Tulkinovich, S.Kh. Nishonova, Kh.S. Nurmukhamedov

Chemical Technology, Control and Management

The article presents the results of an experimental study on the hydraulic resistance of a tubular-grid nozzle made of smooth pipes and pipes with spiral turbulators. Experiments were carried out with nozzles made of smooth pipes and pipes with turbulators. Spiral turbulators are placed discretely with a step t/d=0,3125-0,9375 and installed on a tube sheet in a checkerboard pattern with a step s/d=1,15-10. Experimental studies were carried out with air flow in the transition region.

It has been established that with increasing numerical values of the dimensionless parameter s/d, the resistance of the pipe package decreases from 1,3 to 1,8 …

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil

Theses and Dissertations

This multidisciplinary study aimed at investigating the impact of incorporating graphene oxide (GO) on the mechanical properties and electromagnetic (EM) shielding effectiveness of cementitious mixtures, as well as critically examining the mechanism with which GO affects their microstructure properties. Analysis of the literature review showed that there are discrepancies in reporting the impact of GO on the mortar mix. Consequently, this study focuses on exploring the cause for such discrepancies and identifies three main factors which are thoroughly investigated. The factors were the different sonication energies applied to the GO (Shear Mixing, 1.5 kJ/ml, 3 kJ/ml and 6 kJ/ml), the …

Application Of The Mixed Integer Nonlinear Programming Technique For The Economic Planning Of Transmission Networks In New Manner, Nader Shawky Abdelhakeem, Maged Gamal Lotfy, Mohamed Shibl Albags, Ahmed Saied Elzawawy

Mansoura Engineering Journal

In the recent years, the mathematical planning model of transmission networks based on full AC load flow has been developed. But, due to the model non-convexity and the existing of large number of local solutions, this model can only be used for small size networks as it consumes large unreasonable computation time in addition to its incapability to yield global solution in most cases. To overcome these problems, two new iterative solution procedures have been presented in this paper. In the first one, the objective function is changed to the minimization of the number of new lines required to satisfy …

Machine-Learning-Assisted Design Of Deep Eutectic Solvents Based On Uncovered Hydrogen Bond Patterns, Usman Lame Abbas, Yuxuan Zhang, Joseph Tapia, Md Selim, Jin Chen, Jian Shi, Qing Shao

Markey Cancer Center Faculty Publications

Non-ionic deep eutectic solvents (DESs) are non-ionic designer solvents with various applications in catalysis, extraction, carbon capture, and pharmaceuticals. However, discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation. The search for DES relies heavily on intuition or trial-and-error processes, leading to low success rates or missed opportuni- ties. Recognizing that hydrogen bonds (HBs) play a central role in DES formation, we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning (ML) models to discover new DES systems. We first analyze the …

Initiation Criteria For The Onset Of Geomagnetic Substorms Based On Auroral Observations And Electrojet Current Signatures, Mayowa Michael Kayode-Adeoye

Graduate Theses and Dissertations (2019 - present)

In recent years, several substorm onset criteria have been developed, either from auroral observations (many authors) or from auroral electrojet properties such as those described by (Forsyth et al., 2015; Maimaiti et al., 2019; Newell & Gjerloev, 2011; Partamies et al., 2011) The different criteria are being investigated using a low order physics model of the magnetosphere called WINDMI (Spencer et al., 2009) and inferences are being made in line with the WINDMI model. The model variables will be compared with the criteria for substorm onset proposed by examining the SML index.

The WINDMI model uses solar wind and IMF …

Furthering Development Of Smart Fabrics To Improve The Accessibility Of Music Therapy, Ellie Nguyen, Daisy Z. Fernandez-Reyes, Franceli L. Cibrian

Engineering Faculty Articles and Research

In this paper, we present the design and development of HarmonicThreads, a smart, cost-effective fabric augmented by generative machine learning algorithms to create music in real time according to the user's interaction. In this manner, we hypothesize that individuals with sensory differences could take advantage of the fabric's flexibility, the music will adapt according to users' interaction, and the affordable hardware we propose will make it more accessible. We follow a design thinking methodology using data from a multidisciplinary team in Mexico and the United States. Then we will close this paper by discussing challenges in developing accessible smart fabrics …