Other Engineering Commons^™

An Adaptive Photovoltaic Topology To Overcome Shading Effect In Pv Systems, Mohamed Amer Chaaban, Lana El Chaar, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Shading in photovoltaic systems can cause many undesired effects.When shading occurs, the power generated from the PV system is much less than nominal power, increasing the electrical mismatching losses between PV system components. Active research to address this power loss focuses on static and adaptive systems.This paper addresses an adaptive system solution and proposes a new method to adaptively overcome losses due to shading during low radiation conditions. In addition, a statistical analysis for choosing the most feasible and efficient configuration for the system size is presented. The proposed system has been validated under shade conditions in a simulation and …

Building Envelope And Interior Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A difference module determines differences between an out door ambient temperature and an indoor temperature, deter mines a first average of the differences, and determines a second average of the differences. A storing module stores a first data point, the first data point including the first average and a first total run time of a heating, ventilation, and/or air conditioning (HVAC) system, and stores a second data point, the second data point including the second average and a second total run time of the HVAC system. A fitting module fits a line to the first and second data points. An …

An Architectural Perspective On Structured Sacred Space—Recent Evidence From Iron Age Ireland, Frank Prendergast

Book/Book Chapter

N/A

A Review Of Approaches For Sensing, Understanding, And Improving Occupancy-Related Energy-Use Behaviors In Commercial Buildings, Hamed Nabizadeh Rafsanjani, Changbum R. Ahn, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Buildings currently account for 30–40 percent of total global energy consumption. In particular, commercial buildings are responsible for about 12 percent of global energy use and 21 percent of the United States’ energy use, and the energy demand of this sector continues to grow faster than other sectors. This increasing rate therefore raises a critical concern about improving the energy performance of commercial buildings. Recently, researchers have investigated ways in which understanding and improving occupants’ energy-consuming behaviors could function as a cost-effective approach to decreasing commercial buildings’ energy demands. The objective of this paper is to present a detailed, up-to-date …

Use Of Fiber-Reinforced Cements In Masonry Construction And Structural Rehabilitation, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

The use of fiber reinforcement in traditional concrete mixes has been extensively studied and has been slowly finding its regular use in practice. In contrast, opportunities for the use of fibers in masonry applications and structural rehabilitation projects (masonry and concrete structures) have not been as deeply investigated, where the base matrix may be a weaker cementitious mixture. This paper will summarize the findings of the author’s research over the past 10 years in these particular applications of fiber reinforced cements (FRC). For masonry, considering both mortar and mortar-unit bond characteristics, a 0.5% volume fraction of micro fibers in type …

Method And System For Optimal Coordination Control And Soft Repair Of Multiple Rooftop Heating And Cooling Units, Haorong Li

Durham School of Architectural Engineering and Construction: Faculty Publications

Techniques are described that may be implemented in an adaptive control device to regulate multiple zone environmental units based upon multiple temperature values and multiple airflow values, where each temperature value and each airflow value is related to the temperature and the airflow in a specific zone. In an implementation, the input interface of the adaptive control device is configured to receive multiple temperature values and multiple air flow values from multiple zone sensors. The adaptive control device may calculate multiple operational values based on the multiple temperature values and the multiple air flow values. An operational value indicates a …

Stock Aggregation Model And Virtual Archetype For Large Scale Retrofit Modelling Of Local Authority Housing In Ireland, James Pittam, Paul D. O’Sullivan, Garrett O’Sullivan

Conference Papers

Developing representative archetypes using a bottom up approach for stock modelling is an excellent tool for evaluating the overall performance of the building stock; however it requires detailed analysis of the various building types. Currently there is no detailed housing data base for Local Authority housing in Cork City, Ireland that catalogues the housing stocks geometric properties and thermal characteristics for each typology. This study details a methodology to catalogue the LAH stock and build a detailed housing data base. The GIS web based mapping application Google Street View is used to identify 20 house typologies across 36 LAH developments; …

Virtual Surface Temperature Sensor For Multi-Zone Commercial Buildings, Yuebin Yu, Denchai Woradechjumroen, Daihong Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

Multi-zone structure is commonly used in small commercial office buildings, retail stores and supermarket. While there is no adjacent wall between the zones, the impact of a neighbor zone on the current zone can be approximated and analyzed through the application of virtual walls. It is critical to accurately estimate the virtual wall surface temperature in order to evaluate the model uncertainty and apply improved supervisory control on multiple rooftop air-conditioning units (RTUs). We propose an innovative virtual surface temperature sensor based on system-identification to solve this challenge. The validation of the virtual temperature model is processed by the three …

The Influence Of National Culture On Effectiveness Of Safety Trainings During Postdisaster Reconstruction, Behzad Esmaeili, Kevin Grosskopf, Amy Javernick-Will

Durham School of Architectural Engineering and Construction: Faculty Publications

Non-English speaking workers constitute a disproportionately high number of workers involved in postdisaster reconstruction. Additionally, the rate of fatality among these workers is higher than the industry average. Research shows this population is more prone to unsafe behaviors in the working environment, conceivably because many of these workers are sent into the field prior to any formalized training. Recent studies show that the native culture of construction workers can impact risk-taking behavior. While numerous researchers have attempted to develop training materials for Hispanic workers, the number of studies that consider the impact of native culture on safety behavior is minimal. …

Shallow Flat Soffit Precast Concrete Floor System, George Morcous, Maher Tadros

Durham School of Architectural Engineering and Construction: Faculty Publications

A precast concrete floor system that eliminates the need for column corbels and beam ledges while being very shallow. The main advantages of the present system include a span to-depth ratio of 30, a flat soffit, economy, consistency with prevailing erection techniques, and fire and corrosion protection. The present system consists of continuous precast columns, prestressed rectangular beams, hollow-core planks, and cast-in-place composite topping. Testing results have indicated that a 12 inch deep flat soffit precast floor system has adequate capacity to carry gravity loads (including 100 psf live load) in a 30 ft x 30 ft bay size. Testing …

Hybrid Of Natural Element Method (Nem) With Genetic Algorithm (Ga) To Find Critical Slip Surface, Shahriar Shahrokhabadi, Vahid Khoshfahm, Hamed Nabizadeh Rafsanjani

Durham School of Architectural Engineering and Construction: Faculty Publications

One of the most important issues in geotechnical engineering is the slope stability analysis for determination of the factor of safety and the probable slip surface. Finite Element Method (FEM) is well suited for numerical study of advanced geotechnical problems. However, mesh requirements of FEM creates some difficulties for solution processing in certain problems. Recently, motivated by these limitations, several new Meshfree methods such as Natural Element Method (NEM) have been used to analyze engineering problems. This paper presents advantages of using NEM in 2D slope stability analysis and Genetic Algorithm (GA) optimization to determine the probable slip surface and …

A Simple Method For Estimation Of Queue Length, S. P. Anusha, Lelitha Devi Vanajakshi, Anuj Sharma

Department of Civil and Environmental Engineering: Faculty Publications

Urban arterials are characterized by frequent intersections. Queue length and delay are the two primary measures of performance of intersection. These measures play a primary role in determining the arterial performance. This article presents a methodology to determine the number of vehicles in queue at a signalized intersection for under saturated traffic conditions. The results obtained were validated using actual values that are manually extracted. The root-mean-square error is of the range 1.3 vehicles for estimation of number of vehicles in queue. The various aspects that have to be considered in accurate estimation of performance measures are also discussed.

Multi-Objective Time-Cost Optimization Using Cobb-Douglas Production Function And Hybrid Genetic Algorithm, Zhigang Shen, Ashkan Hassani, Qian Shi

Durham School of Architectural Engineering and Construction: Faculty Publications

Existing research on construction time-cost tradeoff issues rarely explore the origin of the crashing cost. Crashing cost function was either assumed without much justification, or came from historical data of some real projects. As a result the conclusions of the papers can hardly be used to guide allocations of labor and equipment resources respectively. The authors believe Cobb-Douglas function provides a much-needed piece to modeling the cost functions in the construction time-cost tradeoff problem during the crashing process. We believe this new perspective fills a gap of existing time-cost tradeoff research by considering project duration, labor and equipment cost as …

Effects Of Reverberation And Noise On Speech Comprehension By Native And Non-Native English-Speaking Listeners, Z. Ellen Peng, Lily M. Wang, Siu-Kit Lau, Adam M. Steinbach

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have demonstrated the negative impact of adverse signal-to-noise-ratios on non-native English-speaking listeners' performance on speech recognition using recall tasks, as well as implied that comprehension skills were more impaired than recognition skills under reverberation and noise. The authors have themselves previously conducted a pilot study on three native and three non-native Englishspeaking listeners to examine the effects of reverberation and noise using speech comprehension tasks. Those results suggested that speech comprehension performance is worse under longer reverberation times (RT), and that a longer RT is more detrimental to speech comprehension by non-native listeners than native listeners. This paper …

Acoustic Tweets And Blogs: Using Social Media In An Undergraduate Acoustics Course, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Each fall, the author teaches an undergraduate architectural acoustics course to around 40 third-year architectural engineering students at the University of Nebraska. Beginning in 2011, a social media component was introduced to explore the use of this technology and how it may supplement the students' learning experience. Students were given an opportunity to receive extra credit by using Twitter and/or blogging about course material using a set hashtag (#AE3300) or through the course website. Results were positive, and the author will discuss pros and cons that she has experienced in adding this social media component. Suggestions for future implementations and …

Mixed Method Collaboration In The Built Environment, Dermot Kehily

Conference papers

The built environment discipline or inter-discipline is a relatively new field in academic research. Its subject matter however is based on the traditional disciplines of the construction and property industries. Determining your ontological position and epistemological approach based on the researchparadigm of one of these fields’ may not provide an adequate solution to your research objectives.This paper outlines that framing your research within the broader confines of the built environment; drawing from related fields in an integrated manner may provide a more successful outcome.Arguments whether the built environment is an academic discipline or even the range of subjects thatmake up …

Lifecycle Energy Consumption Prediction Of Residential Buildings By Incorporating Longitudinal Uncertainties, Endong Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

Accurate prediction of buildings’ lifecycle energy consumption is a critical part in lifecycle assessment of residential buildings. Longitudinal variations in building conditions, weather conditions and building’s service life can cause significant deviation of the prediction from the real lifecycle energy consumption. The objective is to improve the accuracy of lifecycle energy consumption prediction by properly modelling the longitudinal variations in residential energy consumption model using Markov chain based stochastic approach. A stochastic Markov model considering longitudinal uncertainties in building condition, degree days, and service life is developed: 1) Building’s service life is estimated through Markov deterioration curve derived from actual …

Assessing The Engineering Performance Of Affordable Net-Zero Energy Housing, Jordan P. Wallpe

Purdue Polytechnic Masters Theses

The purpose of this research was to evaluate affordable technologies that are capable of providing attractive, cost-effective energy savings to the housing industry. The research did so by investigating the 2011 Solar Decathlon competition, with additional insight from the Purdue INhome. Insight from the Purdue INhome verified the importance of using a three step design process to design a net-zero energy building. In addition, energy consumption values of the INhome were used to compare and contrast different systems used in other houses.

Evaluation of unbiased competition contests gave a better understanding of how a house can realistically reach net-zero. Upon …

A Composite Structural Steel And Prestressed Concrete Beam For Building Floor Systems, Nathan Dewit

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Precast prestressed concrete beams, such as rectangular and inverted tee beam, currently used in residential and commercial buildings are deep, heavy, and limited to span-to-depth ratios of 15. The research proposes a composite structural steel and prestressed concrete beam that is shallow, light, easy to produce and erect, and able to achieve a span-to-depth ratio of 24. The proposed beam is designed to be used with precast columns, hollow-core planks, and a cast-in-place topping to create a moment-resisting floor system that minimizes the need for shear walls. The goal of this system is to eliminate as many of the limitations …

A Directionally Tunable But Frequency-Invariant Beamformer On An Acoustic Velocity-Sensor Triad To Enhance Speech Perception, Yue Ivan Wu, Kainam Thomas Wong, Xin Yuan, Siu-Kit Lau, Shiu-Keung Tang

Durham School of Architectural Engineering and Construction: Faculty Publications

Herein investigated are computationally simple microphone-array beamformers that are independent of the frequency-spectra of all signals, all interference, and all noises. These beamformers allow the listener to tune the desired azimuth-elevation “look direction.” No prior information is needed of the interference. These beamformers deploy a physically compact triad of three collocated but orthogonally oriented velocity sensors. These proposed schemes’ efficacy is verified by a jury test, using simulated data constructed with Mandarin Chinese (a.k.a. Putonghua) speech samples. For example, a desired speech signal, originally at a very adverse signal-to-interference-and-noise power ratio (SINR) of -30 dB, may be processed to become …

Application Of Drum-Buffer-Rope Methodology In Scheduling Of Healthcare System, Arefeh Mohammadi, Emmanuel S. Eneyo

Durham School of Architectural Engineering and Construction: Faculty Publications

Theory of constraints (TOC) is a management philosophy that seeks to increase throughput (efficiency or performance) of the system by identifying those processes that are constraining the system bottlenecks. There have been very few profound studies of TOC in health care systems. In order to fill this gap, this study was conducted to determine how healthcare systems are utilizing components of TOC to schedule operations and what results are being obtained. This is done by using a patient flow model for a radiotherapy section of a hospital. The drum-buffer-rope (DBR) was used as the methodology for scheduling this flow. Successful …

Teaching Sustainable Design Using Bim And Project-Based Energy Simulations, Zhigang Shen, Wayne Jensen, Tim Wentz, Bruce Fischer

Durham School of Architectural Engineering and Construction: Faculty Publications

The cross-disciplinary nature of energy-efficient building design has created many challenges for architecture, engineering and construction instructors. One of the technical challenges in teaching sustainable building design is enabling students to quantitatively understand how different building designs affect a building’s energy performance. Concept based instructional methods fall short in evaluating the impact of different design choices on a buildings’ energy consumption. Building Information Modeling (BIM) with energy performance software provides a feasible tool to evaluate building design parameters. One notable advantage of this tool is its ability to couple 3D visualization of the structure with energy performance analysis without requiring …

Effects Of Roof Pitch On Air Flow And Heating Load Of Sealed And Vented Attics For Gable-Roof Residential Buildings, Shimin Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

Pitch value is an important consideration in residential gable roof design and construction. However, how roof pitch, coupled with air flows in attic space, affects the energy performance of building attics has been barely investigated. In this paper, a 2D unsteady computational fluid dynamics (CFD) model is employed to investigate the effects of roof pitch on air flow and heating load of both sealed and vented attics for gable-roof residential buildings. The simulation results show that air flow in the sealed attics is steady and asymmetric, while that in the vented attics is a combination of an essentially symmetric base …

Effects Of Inclusion Shapes Within Rigid Porous Materials On Acoustic Performance, Hyun Hong, Siu-Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The present study investigates the influence of various shapes of inclusions having same volume embedded in a porous rigid material. Previous studies showed improvement of the broadband sound absorption with particular shapes of inclusions. However, different volumes of the inclusions have been considered; therefore, the bulk densities are not the same for comparison. The present study extends the investigations of inclusions in porous materials with same volume (or bulk density) to eliminate the influence by the change of bulk density. The effects of shape will be discussed. Finite element modeling will be used for this study. Total four different shapes: …

Impacts Of Ventilation Ratio And Vent Balance On Cooling Load And Air Flow Of Naturally Ventilated Attics, Shimin Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

The impacts of ventilation ratio and vent balance on cooling load and air flow of naturally ventilated attics are studied in this paper using an unsteady computational fluid dynamics (CFD) model. Buoyancy-driven turbulent ventilations in attics of gable-roof residential buildings are simulated for typical summer conditions. Ventilation ratios from 1/400 to 1/25 combined with both balanced and unbalanced vent configurations are investigated. The modeling results show that the air flows in the attics are steady and exhibit a general streamline pattern that is qualitatively insensitive to the variations in ventilation ratio and vent configuration. The predicted temperature fields are characterized …

The Impact Of Roof Pitch And Ceiling Insulation On Cooling Load Of Naturally-Ventilated Attics, Shimin Wang, Zhigang Shen, Linxia Gu

Durham School of Architectural Engineering and Construction: Faculty Publications

A 2D unsteady computational fluid dynamics (CFD) model is employed to simulate buoyancy-driven turbulent ventilation in attics with different pitch values and ceiling insulation levels under summer conditions. The impacts of roof pitch and ceiling insulation on the cooling load of gable-roof residential buildings are investigated based on the simulation of turbulent air flow and natural convection heat transfer in attic spaces with roof pitches from 3/12 to 18/12 combined with ceiling insulation levels from R-1.2 to R-40. The modeling results show that the air flows in the attics are steady and exhibit a general streamline pattern that is qualitatively …

Development And Evaluation Of A Simplified Modeling Approach For Hydraulic Systems, Yuebin Yu, Vivian Loftness, Daihong Yu, Yan Lu, Volker Hartkopf

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents how a hydraulic system can be properly modeled for hydraulic balancing, knowledge of flow distribution, coupled simulation, and evaluation of control, etc. It focuses on water-based heating and cooling systems, which generally have high energy efficiency in design but could perform poorly in reality due to the undersensing condition and strong thermal-hydraulic coupling. The study introduces the motivation, presents the simplified modeling methodology, and illustrates the model and simulating structure. A preliminary evaluation of the method is conducted with two simple simulations. The proposed “node-branch-state” modeling approach could be easily modified, expanded and integrated into a detailed …

Industry-Experienced Graduate Student Program: Innovative Collaboration In Architectural Engineering At The University Of Nebraska–Lincoln, Clarence E. Waters, Steve Alvine, Michelle L. Eble-Hankins

Durham School of Architectural Engineering and Construction: Faculty Publications

In 2001, the Architectural Engineering Department at the University of Nebraska–Lincoln, along with industry partners, established an industry-experienced graduate student program. The program was developed to bring experienced design professionals to collaborate with the industry while pursuing a Ph.D. in architectural engineering. This program is designed to be mutually beneficial to industry partners, -graduate students, the University of Nebraska–Lincoln Architectural Engineering Department, and the building industry at large. The first doctoral candidate in the program graduated, and significant collaborative work was completed for the industry partner. All parties to this initial offering are pleased with the outcome and believe the …

Bus On Shoulder: Local Assessment Of Shoulder Transit Lane For Regional Buses In San Luis Obispo County, Jessica R. Berry

Master's Theses

The study looks at the applicability of integrating a Bus Only Shoulder (BOS) into the intermittently congested segment of US 101 in southern San Luis Obispo County. Policy, infrastructure and implementing criteria derived from case studies in Minnesota, Florida and California (San Diego) and the 2007 California Decision Document on BOS are applied to conditions in the region. One measure of performance, time savings, is projected to 2025 to determine the value of integrating the program by that horizon year. Given the substantial potential for time savings in that future year, recommendations are made to create the appropriate policy and …

Active Noise Barrier Minimizing Pressure Gradient, Carl Hart, Siu-Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

Minimization of the sound pressure field within the shadow zone of a noise barrier is achieved by reducing the pressure gradient along a line, at the top of a barrier, via active noise control. The noise control effectiveness of a barrier is increased by this strategy, especially for specific system configurations. The proposed method was evaluated by numerical simulation. Results indicate that system orientation has little effect on minimizing the pressure gradient at the top of the barrier when the error sensors are invisible to the primary noise disturbance. Highly effective control within the shadow zone and close to the …