Systems Engineering Commons^™

Ai Agent For Healthcare Education, Sudhanshu Tarale

Shelby Hall Graduate Research Forum Presentations

No abstract provided.

Design Of A Fuzzy Set-Point Tracking Controller Based On The State-Dependent Control Characteristics Of Fuzzy Logic And Pid For Temperature Control Systems In Electrical Equipment, Rahim Mammadzada

Chemical Technology, Control and Management

This paper presents a Fuzzy-SPT (Fuzzy Set-Point Tracking) controller designed to combine the strengths of FLC (Fuzzy Logic Control) and PID (Proportional-Integral-Derivative) control while mitigating their limitations across varying operating conditions. Inspired by state-dependent reasoning but implemented within a single controller, the method uses internal logic to adapt the control effort across different operating regions. FLC handles rapid changes and nonlinear transients, enabling fast system response without overshoot, while PID-like integral action is activated when the FLC reaches steady state or enters a threshold region near the set point, eliminating residual errors and maintaining stable performance. By applying each behavior …

Experiential Learning And The Revitalization Of Manufacturing Education At The University Of Dayton, Sean Cahill

Research and Reflection on Learning and Teaching in Higher Education

This perspective paper explores the role of experiential learning in preparing future-ready manufacturing engineers at the University of Dayton, set against the backdrop of Dayton’s legacy as an industrial innovator and the broader national movement to revitalize domestic manufacturing. As automation, cyber-physical systems, and Industry 4.0 technologies reshape the manufacturing landscape, there is a growing need for engineers who possess both technical fluency and systems-thinking capabilities. To meet this need, the manufacturing engineering technology department implemented hands-on, integrated lab-and-lecture modules through support from the Experiential Learning Innovation Fund for Faculty (ELIFF). Grounded in Kolb’s Experiential Learning Theory and constructivist learning …

An Operational Field Study: A Comparison Of Piloting Uncrewed Underwater Vehicles And Uncrewed Aircraft Systems, David Thirtyacre, Joseph Cerreta, Pete Miller, Kimberly Luthi, Jolee Thirtyacre

Publications

and operations, the ability to cross-train personnel in both Uncrewed Underwater Vehicles and Small Uncrewed Aircraft System operations has become a focal point for efficiency and workforce optimization. This study presents a comparative analysis of the operational and human factor considerations involved in piloting mini UUV and sUASs, highlighting the key similarities and differences in control methods, environmental influences, navigation, emergency procedures, and situational awareness. A qualitative experimental field study was conducted between July 2024 and October 2024, involving real-world deployments of both systems in maritime and aerial environments. Findings indicated that while UUV and sUAS operators relied on remote …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Development Of Detection And Tracking Systems For Autonomous Vehicles Using Machine Learning, Tyler Ward

Morehead State Theses and Dissertations

A thesis presented to the faculty of the Elmer R. Smith College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science by Tyler Ward April 25, 2023.

Investigating Collaborative Explainable Ai (Cxai)/Social Forum As An Explainable Ai (Xai) Method In Autonomous Driving (Ad), Tauseef Ibne Mamun

Dissertations, Master's Theses and Master's Reports

Explainable AI (XAI) systems primarily focus on algorithms, integrating additional information into AI decisions and classifications to enhance user or developer comprehension of the system's behavior. These systems often incorporate untested concepts of explainability, lacking grounding in the cognitive and educational psychology literature (S. T. Mueller et al., 2021). Consequently, their effectiveness may be limited, as they may address problems that real users don't encounter or provide information that users do not seek.

In contrast, an alternative approach called Collaborative XAI (CXAI), as proposed by S. Mueller et al (2021), emphasizes generating explanations without relying solely on algorithms. CXAI centers …

A Vision-Based Quality Control Model For Manufacturing Systems, Alejandra Figueroa-Lopez

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Alejandra Figueroa-Lopez on November 25, 2021.

Risks To Student Achievement In Higher Education, Angela Atwell, Bettina Mrusek, James Solti, Keith Wilson

Publications

A university system sets out to deliver educational experiences that meet set goals such as the achievement of learning outcomes for individual courses and program outcomes for degree programs. There are many factors that impact the successful achievement of student learning outcomes and there-fore successful program design and implementation. If courses are not effec-tively designed with assessments properly aligned to learning outcomes, student achievement is challenging to measure. If faculty do not consistently adhere to college and/or university policies regarding submission of assignments, student behavior and perceptions of expectations in future courses may be skewed. In addition, students may, for …

The Application Of Measures Of Lean Production For Services, Willem Salentijn, Jiju Antony, Chad Laux

International Conference on Lean Six Sigma

This paper gives insights on how to measure the degree of lean for services and explores existing instruments, proposing adaptions on an existing instrument, developed for production.

From Letters To Logistics - The Enabling Role Of A Lean Transformation Programme In A National Postal Service: The Case Of An Post, Ireland, Seamus O'Reilly, Leadiing Edge Group, An Post

International Conference on Lean Six Sigma

From Letters to Logistics - The enabling role of a lean transformation programme

in a national postal service: The case of An Post, Ireland

Seamus O’Reilly (Cork University Business School), David Murray (An Post) and Joe Aherne (Leading Edge Group)

Abstract

Purpose

This paper investigates the role of a lean transformation programme in supporting the transition of a national postal (mail) service from a traditional letter delivery service to a competitive parcel delivery service.

Methodology

Given the objective an intrinsic case study (Stake, 2005) approach was adopted, as this specific case was of interest. To support this approach the researchers …

Six Sigma And Lean Approach For Enhanced Process Value Chain, Maryam Zulfiqar

International Conference on Lean Six Sigma

Abstract

This research highlight the different aspects of implementing lean and six-sigma approach, their contrasting features and integration in manufacturing organizations. Qualitative research method has been used to conduct this research as the defined period of time for the research was limited. This method was pertinent for the deep analysis of literature and case studies of concerned approaches. It helped to conduct the research in a subjective manner. The use of secondary data saved time from preparing the questionnaires or surveys also the ethical approval from the University of the West of Scotland was not required. Descriptive feature of qualitative …

Applying Lean Six Sigma And Systematic Layout Planning To Improve Patient Transportation Equipment Storage In An Acute Care Hospital, Sandra Furterer, Pratheeka Kancharla

International Conference on Lean Six Sigma

Purpose:

The purpose of this project was to optimize the patient transportation process at an acute care hospital to achieve reduced transportation times.

Methodology:

A detailed Lean Six Sigma study on the patient transport and equipment handling processes helped to determine possible ways to reduce the equipment handling time which eventually reduces the patient transportation time. The Systematic Layout Planning (SLP) approach usually applied in manufacturing environments was used to identify which patient transport equipment was needed to be stored in which locations throughout the hospital footprint. The assignment of equipment to locations was determined based on frequency of use, …

Designing An Adjustable And Transportable Staircase, Allison Currey

Undergraduate Honors Thesis Projects

People climb stairs every day, whether it is at work, a store, or at home; however, there are populations such as people who are elderly, with pathologies, with Parkinson’s disease, or have suffered from a stroke that see climbing the stairs as a challenging task and it decreases their mobility and quality of life. Factors such as muscle weakness, strategy, and balance have been previously investigated in these populations during stair climbing. However, few studies have researched how stair climb ability, balance, and perception of difficulty are influenced by step height. The objective of this thesis is to design a …

Development Of A System Architecture For The Prediction Of Student Success Using Machine Learning Techniques, Tatiana A. Cardona

Doctoral Dissertations

“ The goals of higher education have evolved through time based on the impact that technology development and industry have on productivity. Nowadays, jobs demand increased technical skills, and the supply of prepared personnel to assume those jobs is insufficient. The system of higher education needs to evaluate their practices to realize the potential of cultivating an educated and technically skilled workforce. Currently, completion rates at universities are too low to accomplish the aim of closing the workforce gap. Recent reports indicate that 40 percent of freshman at four-year public colleges will not graduate, and rates of completion are even …

Suborbital Payload Testing Aboard Level 3 Rocket Research Platform, Pedro Llanos, Sathya Gangadharan, Nikita Amberkar, Isachi Halphen, Melisa Mastroliberti, Michelle Munasinghe

Publications

Embry-Riddle Aeronautical University (ERAU) has launched several suborbital scientific payloads aboard Blue Origin’s New Shepard in 2017 and 2019. Students continue gaining hands-on experience in rocket design and construction, and payload integration and testing of future and more mature payloads to be launched into space. A Level 3 Rocket is being designed and developed at ERAU to serve as a scaled-down model research platform for launching and testing of payloads that will be later flown in commercial suborbital platforms such as Blue Origin’s New Shepard and PLD space Miura 1 rockets. Computer simulations were conducted to calculate the key parameters …

The Self-Sufficient Ticketing Response System For The Rajant Support Network, Maria E. Lemaster

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Maria E. Lemaster on April 26, 2019.

Development Of A Scada System For Alternative Energy, Molom-Ochir Mijid

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirement for the Degree Master of Science by Molom-Ochir Mijid on April 18, 2019.

Reflections On Teaching System Dynamics Modeling To Secondary School Students For Over 20 Years, Diana Fisher

Complex Systems Faculty Publications and Presentations

This paper contains the description of a successful system dynamics (SD) modeling approach used for almost a quarter-century in secondary schools, both in algebra classes and in a year-long SD modeling course. Secondary school students have demonstrated an ability to build original models from the news, write technical papers explaining their models, and present a newfound understanding of dynamic feedback behavior to an audience. The educational learning theory and instructional methods used for both the algebra and modeling courses are detailed, with examples. Successful student SD modeling experiences suggest the SD approach can expand the sophistication of topics that secondary …

Lean Innovation - Funding Stem Education, Samarth Gupta, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

An Institutional Approach To Lean Six Sigma In Higher Education, Timothy Winders, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

Evaluation Of Point Of Distribution Exercise, Kristen Dietz, Andrew Barett, Chad Laux Phd, Ryan Tennessen, Randy Black Phd, Pamela Aaltonen Phd, James E. Dietz Phd

International Conference on Lean Six Sigma

No abstract provided.

Improving Security Efficacy And Patron Wait Times In Bankers Life Fieldhouse At Indiana Pacers Games, Christien Alexander, Shaince Matthews, Ryan Mccavit, Roneisha Watkins, James E. Dietz Phd, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

Implementing Lean Six Sigma In Fda Regulated Technology Transfer, Naina Zachariah, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

Improving Peruvian Manufacture Of Welding Electrodes, Almendra Morales, Alejandro Gallegos, David Hernandez, Maria Ortiz

International Conference on Lean Six Sigma

No abstract provided.

Applying Kaizen To University Teaching Through Weekly Course Evaluation, Ingo Kregel

International Conference on Lean Six Sigma

Current evaluation standards in German higher education institutions (HEIs) most often do not lead to measurable quality improvement. The purpose of this paper is to critically evaluate whether Kaizen can be a useful methodology to improve the quality of teaching on course level and intensify the exchange and discussion between lecturers and learners.

From The Head To The Heart: A Case Study Of The Start-Up Year For Lean Six Sigma In University College Dublin, Michael Sinnott

International Conference on Lean Six Sigma

The purpose of this paper is to reflect back on the first year of running a Lean Six Sigma programme in University College Dublin. This year begins after the decision to run a process enhancement and culture change project using Lean Six Sigma has been taken, a high level implementation plan signed off, and the UCD Agile support unit created.

Stakeholder Theory: Implications For Total Quality Management In Higher Education, Louis Hickman, Mesut Akdere

International Conference on Lean Six Sigma

No abstract provided.

Preface, Chad Laux, Jiju Antony, Elizabeth Cudney

International Conference on Lean Six Sigma

Preface for the Proceedings of the 4th International Conference on Lean Six Sigma for Higher Education.

Leadership’S Guide For Achieving Sustainable Lean Six Sigma Program Change In Higher Educational Institutions, Sandra Furterer

International Conference on Lean Six Sigma

This paper will highlight the current research, practices and an innovative framework for enhancing Lean Six Sigma leadership engagement, and program success in higher educational institutions.