Systems Engineering Commons^™

A Systems-Based Framework For The Assessment Of Performance Measurement System Implementations In R&D Organizations, Kenneth S. Baggett Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Performance measurement is utilized by organizations in all industries, including research and development (R&D). Measures are developed, data are collected, and the measurement results are used to drive the organization. The implicit hope is, of course, that the measures drive the organization to improve. However, literature identifies high failure rates directly related to performance measurement system (PMS) implementations. Establishing the fundamental operational characteristics associated with successful PMSs would provide a significant contribution towards the establishment of PMS assessment criteria. This research addresses this gap through the use of a grounded theory method employed to identify these operational characteristics, assesses the …

Systems Theory Based Framework For Competency Models, Joseph M. Bradley

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems theoretic framework for design, analysis and transformation of competency models using an inductive research design. This research examines the origins and development of competency models from a systems theoretic perspective. Competency models have been largely developed by a comparative method first proposed by McClelland, or the use of Delphi method survey techniques. The assumption that a population containing an exemplar and fully successful members would enable population of a holistic competency model has reported numerous failures. Similarly, reporting on the use of Delphi methods has focused on attempting …

Assessing The Impact Of Electronic Health Record Systems Implementation On Hospital Patient Perceptions Of Care, Katherine Sofia Palacio Salgar

Engineering Management & Systems Engineering Theses & Dissertations

The delivery of health care services has been impacted by advances in Knowledge Management Information Systems (KMIS) and Information Technology (IT). The literature reveals that Electronic Health Records Systems (EHRs) are a comprehensive KMIS. There is a wide recognition in the body of knowledge that demonstrates the potential of EHRs to transform all aspects of health care services and, in consequence, the performance of Health Care Delivery Organizations (HCDO). Authors of published research also agree that there is a need for more empirical contributions that demonstrate the impact of EHRs upon HCDO. It is argued that in most cases, studies …

Interface Evaluation For Open System Architectures, Joshua A. Burger

Theses and Dissertations

This research develops a deterministic interface evaluation framework (IEF) in support of the principles identified in the Modular Open Systems Approach (MOSA). Interface evaluation in weapon system development requires a Decision Analysis (DA) method capable of handling a continuously growing alternative set and functioning with limited availability of senior decision makers. Value Focused Thinking (VFT) is selected as the best method for addressing the parameters of the framework. Inputs from the Medium Altitude Unmanned Aircraft System program office are used. An initial value threshold is established to guide open interface decisions, based on assessments of 15 historical decision scenarios. Open …

A Heuristic For The Analysis Of Truncated Standard Normal Distribution Assemblies, John Walter Ralls, Cesar Ariel Pinto, Shannon R. Bowling, Resit Unal, Charles B. Daniels, S. Long (Ed.), E.H. Ng (Ed.), C. Downing (Ed.)

Engineering Management & Systems Engineering Faculty Publications

The analysis of data sets and process conditions commonly assume the use of standard normal distributions and truncated standard normal distributions (TSND). The use of these distributions has application to various engineering disciplines along with numerous other industries (e.g., financial industries, medical fields, management, etc.). For engineering managers, the use of truncated standard normal distributions has particular relevance when evaluating process conditions commonly associated with assembly tolerances, manufacturing, and associated measures of quality. This article summarizes a heuristic approach for the analysis of assembly-level truncated standard normal distributions and associated research from a recent dissertation (Ralls, 2014). This article provides …

Current Barriers To Successful Implementation Of Fist Principles, Brandon Keller, Joseph R. Wirthlin

Faculty Publications

The Fast, Inexpensive, Simple, and Tiny (FIST) framework proposes a broad set of organizational values, but provides limited guidance on practical implementation. Implementing FIST principles requires clarifying the definitions of “fast,” “inexpensive,” and “simple,” recognizing where FIST does and does not apply. Additionally, a subset of the FIST heuristics was expanded upon to increase their usefulness for practitioners. The primary research findings are that FIST principles are less conducive for highly complex or novel systems, immature technologies, future needs, acquisitions in early development phases, or when performance is the foremost value. FIST principles were also found to be constrained by …

An Epistemological Inquiry Into The Incorporation Of Emergency Management Concept In The Homeland Security With A Post-Disaster Security Centric Focus, Mehmet Secilmis

Engineering Management & Systems Engineering Theses & Dissertations

The historical roots of the Emergency Management concept in the U.S. date back to 19th century. As disasters occurred, policies relating to disaster response have been developed, and many statuary provisions, including several Federal Disaster Relief Acts, conceptually established the framework of Emergency Management. In 1979, with the foundation of the Federal Emergency Management Agency (FEMA), disaster relief efforts were finally institutionalized, and the federal government acknowledged that Emergency Management included mitigation, preparedness, response and recovery activities as abbreviated 'MPRR.'

However, after 2000, the U.S. experienced two milestone events - the September 11 terrorist attacks in 2001 and Hurricane Katrina …

Determining Stakeholder Influence Using Input-Output Modeling, Patrick T. Hester, Kevin Macg. Adams

Engineering Management & Systems Engineering Faculty Publications

Stakeholders are a vital element in all complex systems problems. They are customers, users, clients, suppliers, employees, and team members. They fund the system, design it, build it, operate it, use it, maintain it, and dispose of it. While many approaches exist for classifying and determining their attitudes, these approaches stop short of evaluating stakeholders in a holistic manner. This paper closes this research gap by developing the metric of stakeholder situation influence, a measure which allows for quantitative evaluation of stakeholder influence on a given problem. This measure is derived from Leontief Input-Output analysis. The developed approach extends previous …

The Role Of Team Preparation Processes And Task Conflict On Virtual Team Performance, Pilar Pazos, Ana María Canto

Engineering Management & Systems Engineering Faculty Publications

The purpose of this study is to increase our understanding of the factors contributing to team performance in global virtual teams. We report on a study on global virtual teams involved on applied projects in industry. Team members differed in location and nationalities. This paper examines the relationships between goal commitment, planning and conflict. Data were collected from 34 teams in an international Master program in Quality Management, Safety and Environmental Impact hosted in Bolivia and Chile. Students were from nine different countries in South America. Students were assigned to teams of size 3 and participated in 15-week project as …

The Factors Behind A Successful Implementation Of Electronic Health Records Systems, Anjee Gorkhali

Engineering Management & Systems Engineering Theses & Dissertations

This research explores the role that budget for Information System (IS) and technical expertise of healthcare service provider staff play on the successful leap from a partial to exhaustive implementation of Electronic Health Records (EHR) Systems. Technical expertise in Information Systems might not be easily measurable directly, but there are a number of indicators that could be used as a proxy, such as: Information System (IS) Department Budget, number of IS staff and the extent of technical trainings provided by the IS department to the clinical staff. This research study hypothesizes that quality technical trainings conducted by an IS department …

Design Thinking In Enterprise Supply Chains, Edward Sweeney

Other Resources

No abstract provided.

Identification And Implementation Of Patterns Towards A Model Of Environmental Sustainability, S. Jimmy Gandhi, Santiago Perez, Danial Rushton, Robert Cloutier, Ipek Bozkurt, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

Much like the Quality Revolution did in the 1980's, corporate sustainability has the potential to drive significant changes in the processes and structure of various organizations in the coming decade. With a rapidly growing global population and an ever increasing global demand for resources (Population-Resource-Center, 2012). Sustainability has emerged as one of the primary challenges that organizations will have to deal with in the 21st century. An increasing realization among business executives that profitability by itself is not enough as a measure of success is also driving the increased adoption of sustainable practices in the corporate world (Lowitt and Grimsley, …

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …

Towards An Organizational Strategic Vitality Theory: A Study Of A Public Sector Board Of Directors, Keith L. Woodman

Engineering Management & Systems Engineering Theses & Dissertations

Boards of directors govern practically all organizations of significant size in the public and private sector. Improving the understanding of how boards function is critical because when boards fail, the results can be devastating. Little is understood about the functioning of boards of directors in the public sector, which accounts for a significant amount of the gross national product of the world's economy. The author observed a public sector board of directors for one year. Using the grounded theory research method to analyze the observations, he generated a theory of organizational strategic vitality that describes how a board of directors …

A Method To Improve The Sustainment Of Systems Based On Probability And Consequences, Michael Ashton Gaintner

Engineering Management & Systems Engineering Theses & Dissertations

The FROST Method is presented which improves the efficiency of long-term sustainment of hardware systems. The FROST Method makes sustainment and scheduling decisions based on the minimization of the expected value of current and future costs. This differs from current methods which tend to base decisions not on the expected value of costs, but on the expected inventory demand found through projections using data which is often inaccurate.

Distributions are used to account for randomness and inaccuracy in inputs such as failure rates and vendor-claimed dates for end of production. A Monte Carlo technique is then used to convert these …

Delayed-Bang Approach Towards More Sustainable Critical Infrastructure Risk Management, C. Ariel Pinto, Michael K. Mcshane, Abhishek S. Pathak

Finance Faculty Publications

This article describes the Delayed Bang Approach for determining the value of risk management alternatives in critical infrastructure security. The discussion includes (1) the need for sustainable risk management (2) the importance of time valuation in evaluating competing loss prevention and loss reduction alternatives, (3) the convergence of deterministic engineering economics, survivability analysis, and probabilistic analysis, and (4) hypothetical examples of the Delayed-Bang Approach and significance towards more sustainable risk management.

Utilizing Knowledge Transfer To Promote Management Of Countervailing Risks In Value Stream Analysis, Jeffery A. Temple

Engineering Management & Systems Engineering Theses & Dissertations

Organizations are frequently faced with the challenges of modifying and streamlining their processes by utilizing the latest process improvement techniques such as Lean Thinking. They use these techniques to allow them to better perform their organizational purposes through the elimination of waste and non-value added steps. Personnel performing these modifications need to account for potential outcomes and risks when streamlining processes. An association of knowledge transfer and experience to the identification and handling of these countervailing or alternative risks when performing Lean Thinking value stream analysis is investigated. The elements of risk management, Lean Thinking and knowledge transfer are described. …

Risk And System-Of-Systems: Toward A Unified Concept, C. Ariel Pinto, Michael K. Mcshane, Rani Kady

Engineering Management & Systems Engineering Faculty Publications

The scope of this paper is the survey of both fundamental and most recent publications in system-of-systems, business and insurance, as well as risk analysis, modeling, and management for the purpose of better describing the concept of risk in recognition of emergence and complexity which characterizes many systems within the concern of engineering and business managers. The ultimate goal is to provide engineering and business managers the necessary perspective on the concept of risk and in its management for the next generation of sustainable systems - including various descriptions of risk and discussion of the relevance of properties of system-of-systems …

Towards A Center For Modeling And Simulation: The Case For Jordan, Ghaith Rabadi, Hazem Kaylani, Joseph Barjis (Ed.), Murali Mohan Narasipuram (Ed.), Ghaith Rabadi (Ed.), Jolita Ralyt (Ed.), Pierluigi Plebani (Ed.)

Engineering Management & Systems Engineering Faculty Publications

Modeling and Simulation (M&S) has recently become an important area that is pursued by many researchers and practitioners due to the role it plays in understanding complex systems and problems. We have therefore witnessed the establishment of many M&S organizations in the last two decades especially in the more developed world. Less developed countries are starting to recognize the need for such capability especially that the problems they face are not less complex. In this paper, we present a preliminary study towards a business plan for establishing a scientific center for Modeling, Analysis, Simulation and Animation in Jordan (JoSAMA) and …

Development Of A Framework To Evaluate Human Risk Towards Sustainable Risk Management, Ra'ed M. Jaradat, Rani A. Kady, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

Risk managers are constantly faced with the challenge of making decisions at various levels of their organizations. One of the challenges, which often times is unavoidable, lies in assigning a monetary value to human risks. Such challenge necessitates engineering managers to make educated decisions on the level of risk that the organizations and businesses should accept when it comes to human. The purpose of this study is to suggest a suitable framework that captures this aspect of engineering Risk Management in order to make rational and sustainable decisions about such assessed risk. This will be accomplished by exploring the tools, …

Project And Risk Management: A Systematic Approach, Baqer Alali, C. Ariel Pinto, Andreas Tolk, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

The main purpose of this paper is to discuss three related topics of project management, systems management, and risk management. The issue that would be addressed in this paper is how risks are addressed in project and systems management, and how risks are propagated between projects and systems. A framework is proposed to overcome the problem of risk propagation from project to the systems. It was shown that the proposed framework can be deployed to existing risk management process with reasonable interventions (e.g. process prescribed by PMI). Finally a proof-of-concept application shows potential of the framework for various types of …

Simpler Packaging, Tomiko Oden

Graphic Communication

This project explains how product packaging is become more "green", and thus more simple. Packaging needs to go beyond just simplifying materials and graphics - it needs to create a simpler process in order to reduce wasted time, energy, and resources.

Investigating The Relationship Between An It Project Manager's Emotional Intelligence And The Customer's Perception Of Success, William Jacob Lamarsh Ii

Engineering Management & Systems Engineering Theses & Dissertations

This research focuses on the intersections of Project Management, Information Technology (IT), and Emotional Intelligence. The Project Management Institute (PMI) created the Project Management Professional (PMP) certification, which is one of the most highly regarded and sought after professional certifications (Project Management Institute 2005, p. 15-18). This certification acknowledges the holder as a knowledgeable practitioner in Project Management. The purpose behind Project Management is to obtain requirements, sometimes fluid at best, and develop solutions that are traceable by schedule and cost controls. This approach allows a Project Manager to monitor and control the project through successful completion. However, the PMI …

Value-Driven Enterprise Architecture Score: Evaluation Applied To Joint Force Protection Future State Design, Larry D. Cotton, Gary A. Haase

Theses and Dissertations

This research presents a methodology to evaluate the quality of a system's architecture using principles drawn from Value-Focused Thinking (VFT) and resulting in a Value-Driven Enterprise Architecture Score (VDEA-Score). This is an overall numerical architecture quality score useful to a system's management team to identify the advantages and disadvantages of a system design and associated architecture documentation or to track its quality across discrete evaluation epochs. This effort determined which aspects of the architecture are most valuable to the stakeholder in the areas of (1) the system effectiveness values (quality of the instantiated system being represented and its ability to …

The Hybrid Counterinsurgency Strategy: System Dynamics Employed To Develop A Behavioral Model Of Joint Strategy, Ferdinand Maldonado

Theses and Dissertations

Since the recent focus on the Global War on Terror, both military and civilian theorists have begun to “relearn” the intricacies of counterinsurgency warfare. We face difficult challenges when confronting non-state actors that tend to attack in the time between conventional battles and the establishment of stable governments. This research compares and contrasts current counterinsurgency strategies (Hearts and Minds and Cost Benefit Theory) by applying System Dynamics to provide insight into the influences and emergent behavior patterns of counterinsurgency systems. The information gained from the development of the models and from their simulation behaviors is used to construct a System …

Implementing A Functional Iso 9001 Quality Management System In Small And Medium-Sized Enterprises, Andres Sousa-Poza, Mert Altinkilinc, Cory Searcy

Engineering Management & Systems Engineering Faculty Publications

This conceptual paper provides guidance for the implementation of a functional ISO 9001 quality management system (QMS) in small and medium-sized enterprises (SMEs). To help a SME understand its starting point, four initial states for QMS implementation are defined. Five paths for moving the QMS from the initial state to the desired state are described. To support the transition from the initial to the desired state, some key considerations in implementing a QMS in SMEs are discussed. The paper is based on site visits and implementation assistance the authors have provided to several SMEs. It is anticipated the paper will …

Engineering Management Framework In Support Of Modeling & Simulation Application For Domain Specific Procurement, Thomas Guy Litwin

Engineering Management & Systems Engineering Theses & Dissertations

A strategic process is desirable for project-based organizations in order for them to be efficient and effective when developing Modeling & Simulation (M&S) systems. This thesis proposes an overarching process that combines traditional M&S and Engineering Management methodologies in a new framework to support M&S organizations during the procurement process.

This thesis proposes both a Strategic Project Management Process (SPMP) and a systems engineering process for M&S federation development projects. The systems engineering process utilizes the artifacts of Model Driven Architecture (MDA) to support building M&S federations driven by operational requirements. Detailed research of this systems engineering process revealed a …

Forecasting Flying Hour Costs Of The B-1, B-2, And B-52 Bomber Aircraft, Stefanie L. Van Dyk

Theses and Dissertations

This thesis both evaluates, and presents improvements to, the current method of forecasting flying costs of Air Force aircraft. It uses depot level repairable (DLR) and consumable (CONS) data for the Air Force's bomber platforms: B-1B, B-2, and B-52H. The current forecasting method assumes a proportional relationship between costs and flying hours such that 1) when no hours are flown costs are zero, and 2) a 1% increase in flying hours will increase costs by 1%. The findings of this research indicate that applying log-linear ordinary least squares regression techniques may be an improved fit of flying cost data over …

Leanness And Agility In Job Shops: A Framework For A Survey Instrument Developed Using The Delphi Method, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

Manufacturers are facing new challenges as competition has become global. Manufacturing companies arc looking for strategies which would help them gain an edge over their competitors. In the United States, lean manufacturing and agile manufacturing have been gaining importance among industries. Agile manufacturing was developed when the United States Department of Defense (DOD) requested Iacocca Institute at Lehigh University to develop a manufacturing framework that could give US companies an edge over their worldwide competitors whereas lean manufacturing has its roots tied to the Toyota Production System (TPS). This raises the questions: what is the clear difference between the two …

An Exploratory Study Of Iso 9001:2000 Quality Management Systems Using The Iso/Iec 15504 Architecture, Paul Richard Shimp

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this paper is to provide an exploratory study on the implementation and issues regarding Quality Management Systems as defined by ISO 9001 :2000 using the architecture of ISO/IEC 15504. The recently published ISO/IEC 15504 series of standards provides a framework to assess processes and determine levels of capability. With the use of this framework, the study will focus on the assessment and identification of problem areas requiring focus for continual improvement within an ISO 9001 :2000 quality management system.

The structure of this paper is as follows: Section 1 provides a background discussion of ISO 9001 :2000. …