Systems Engineering Commons^™

An Investigation Of General Criteria For Assessing Space Flight Systems Of Diverse Mission Concept Designs, Cindy L. Daniels

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to investigate the general criteria for assessing the technical implementation risk factors of proposed space science missions at the mission concept stage. According to the National Aeronautics and Space Administration (NASA) Space Flight Program and Project Management Handbook (NASA, 2012), the mission concept review objectives are “To evaluate the feasibility of the proposed mission concept(s) and its fulfillment of the program's needs and objectives. To determine whether the maturity of the concept and associated planning are sufficient to begin Phase A” (p.33). Experts previously defined two technical risk factors, to assess aspects of the …

Analytical Modeling Of Heat Deposition In Propellant For Spacecraft Utilizing Nuclear Thermal Propulsion, Alexander Aueron

Von Braun Symposium Student Posters

No abstract provided.

Space Architecture Assessment Using System-Of-Systems Methodologies, Liam Durbin, Cesare Guariniello, Daniel Delaurentis

The Summer Undergraduate Research Fellowship (SURF) Symposium

As technologies in the space exploration community are further developed, mission complexity and the associated risks have become greater. Dozens of complicated system interactions may result in unexpected, potentially dangerous emergent behaviors. Early efforts are underway by NASA to map potential system architectures (collections of systems which fulfill design requirements) for future human space exploration missions. However, current mission complexity requires the determination of emergent behaviors, as well as time requirements, and safety levels of complicated space exploration architectures, which current analysis methods in use cannot address. To that end, a newer technique has been developed—System Operability Dependency Analysis (SODA). …

Subjectivity In Failure Mode Effects Analysis (Fmea) Severity Classification Within A Reliability Centered Maintenance (Rcm) Context, Marc Banghart, Kari Babski-Reeves, Linkan Bian, Lesley Strawderman

International Journal of Aviation, Aeronautics, and Aerospace

This research paper investigated subjectivity in the severity rating of failure modes within a risk analysis process. Although several risk analysis processes can be utilized, the study considered the application of Failure Modes Effects Analysis (FMEA) or Failure Modes Effects and Criticality Analysis (FMECA) due to its common use within the Aerospace Industry. The study investigated both differences in severity selection given varying amounts of experience as well as any association between severity selection and the provided input information. The main goal of the research was to investigate the impact of data quality on severity selection and to identify factors …

Cyber-Physical System Characterization And Co-Regulation Of A Quadrotor Uas, Seth E. Doebbeling

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

An Unmanned Aircraft System (UAS) is a Cyber-Physical System (CPS) in which a host of real-time computational tasks contending for shared resources must be cooperatively managed to obtain mission objectives. Traditionally, control of the UAS is designed assuming a fixed, high sampling rate in order to maintain reliable performance and margins of stability. But emerging methods challenge this design by dynamically allocating resources to computational tasks, thereby affecting control and mission performance. To apply these emerging strategies, a characterization and understanding of the effects of timing on control and trajectory following performance is required. Going beyond traditional control evaluation techniques, …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Cockpit In The Systems Engineering Lenses, Aysen K. Taylor, Charles B. Keating, T. Steven Cotter

Engineering Management & Systems Engineering Faculty Publications

The commercial transport aircraft of today vary greatly from early aircraft in regards to how they are controlled and the feedback provided from the machine to the human operator. Automation has improved operational precision and efficiency but at the cost of providing less feedback. Pilots are the last line of defense and current technology cannot provide the human ability to solve novel problems for which no computer logic can be written. The automated cockpits of today have may sub-components that interact in a manner often opaque and unpredictable when a sensor or sub-component fails or even in situations where no …

Phased Helical Antenna Array For Cubesat Application, Kameron Lacalli

Undergraduate Honors Theses

CubeSats communication links are typically slow due to their power and size restrictions. However, a low power, high speed down link connection can allow for greater data collection and relaying, pushing the capability of 1U CubeSats beyond what is traditionally thought possible. Investigated here is the feasibility of a 11 Mb/s down link connection on a 1U CubeSat, accomplished via 2x2 helical antenna phased array operating on the 802.11 standard. Using a phased array also allows for beam steering to secure connection with the ground station when the on board ADCS may not provide precise pointing capability of the CubeSat, …

Space Analysis And Research Centers (Sparcs) For Ssa Data And Analytics, Phillip Cunio, Brien Flewelling

Space Traffic Management Conference

Widespread use of massive data and increasing reliance on spaceborne infrastructure are two of the emerging megatrends of the early 21^st century. However, both come with liabilities: movement and processing of large data volumes is very expensive, and reliance on spaceborne infrastructure adds risk that problems in the still incompletely-understood space domain might cause work disruptions.

ExoAnalytic proposes the use of Space Analysis and Research Centers (SpARCs) as a way to begin addressing both these issues. A SpARC is a facility which integrates volumes of data collected on satellites, centrally analyzes it, and makes available resulting useful information. The …

Examining Time To Evacuate Dynamically Activated Aircraft Hazard Areas, Zheng Tao, Granghuai Wang, Ashley G. Williams, Jon L. Semanek, Jonathan L. Schwartz

Space Traffic Management Conference

The growth in launch and reentry operations in the National Airspace System (NAS) presents the Federal Aviation Administration (FAA) with the challenge of integrating them more efficiently while also minimizing effects on other NAS users and maintaining safety. Currently, to maintain safety and account for unforeseen events such as vehicle breakup, the FAA segregates large amounts of airspace, called Aircraft Hazard Areas (AHAs), from traditional NAS users during launch and reentry operations. In order to minimize effects on NAS users, some AHAs during reentry are dynamically activated only if an unexpected event occurs. If a dynamic AHA is activated, then …

The Context Of Tool Control In An Aircraft Assembly Environment Related To Productivity, Taylor Jay Sisson

KSU Journey Honors College Capstones and Theses

The aircraft industry focuses a large portion of its resources on tool control during the assembly of aircraft. Tool control is a strict process that demands time from the assembly process. This time is removed from the value-added time spent actually assembling the aircraft. A study at Lockheed Martin conducted in the Spring of 2016 is discussed that examines the time spent on tool control. Tool control is necessary in aircraft assembly to prevent tools from entering compartments of the aircraft. If such an event occurs, the tool may damage the aircraft. All aircraft assembly processes must be tool controlled, …

Space Data Integrator (Sdi) And Space Program Integrated Data And Estimated Risk (Spider): Proof-Of-Concept Software Solution For Integrating Launch And Reentry Vehicles Into The National Airspace System (Nas), Devin D. Dickens

Space Traffic Management Conference

The Space Data Integrator (SDI) Project is the initial step to satisfy the Federal Aviation Administration (FAA) strategic initiative to integrate commercial space launch and reentry vehicles into the National Airspace System. The project addresses the needs for greater situational awareness and monitoring, and increased response capability during non-nominal and catastrophic incidents during space operations.

The initial phase of this project leverages current FAA systems, and provide an initial demonstration of capability that will provide for state data from a commercial reentry vehicle to be ingested into a the FAA Traffic Flow Management System, and displayed on Traffic Situation Displays. …

Quantum Inspired Algorithms For Learning And Control Of Stochastic Systems, Karthikeyan Rajagopal

Doctoral Dissertations

"Motivated by the limitations of the current reinforcement learning and optimal control techniques, this dissertation proposes quantum theory inspired algorithms for learning and control of both single-agent and multi-agent stochastic systems.

A common problem encountered in traditional reinforcement learning techniques is the exploration-exploitation trade-off. To address the above issue an action selection procedure inspired by a quantum search algorithm called Grover's iteration is developed. This procedure does not require an explicit design parameter to specify the relative frequency of explorative/exploitative actions.

The second part of this dissertation extends the powerful adaptive critic design methodology to solve finite horizon stochastic optimal …

The Relationship Among Hfacs Levels And Analysis Of Human Factors In Unmanned And Manned Air Vehicles, Veysel Yesilbas

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation analyzes the structural relationships among the Human Factors Accident Classification System levels for unmanned air vehicle and manned air vehicle accidents and the common relationships between unmanned air vehicle and manned air vehicle accident causes. The study acquired DOD HFACS accident classification data from 347 United States Air Force Class A accident reports for the years between 2000 and 2013.

The dissertation utilized a set of analysis that is considered to contribute substantially to the respective domain of the study. The correlations found among categorical levels were applied to HFACS taxonomy based on the Reason Model via path …

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

Interaction Model Of Functions In The National Airspace System, Nathan F. Koerschner, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

The National Airspace System (NAS) is comprehensively described by five functions derived from big-picture goals: (1) conflict detection and resolution, (2) controlling aircraft states, (3) traffic flow management, (4) controlling passenger states, and (5) controlling company resources. It can be reasonably assumed that these functions interact in some way; this interaction is currently unknown. A model of the entire NAS would be helpful in discovering these interactions, yet no such comprehensive model exists. To address this problem an agent-based state-based model was created in MATLAB. To date, only functions (1) and (2) were implemented. Running the model shows that there …

A Mechanism Design Approach To Bandwidth Allocation In Tactical Data Networks, Ankur Mour

Open Access Theses

The defense sector is undergoing a phase of rapid technological advancement, in the pursuit of its goal of information superiority. This goal depends on a large network of complex interconnected systems - sensors, weapons, soldiers - linked through a maze of heterogeneous networks. The sheer scale and size of these networks prompt behaviors that go beyond conglomerations of systems or `system-of-systems'. The lack of a central locus and disjointed, competing interests among large clusters of systems makes this characteristic of an Ultra Large Scale (ULS) system. These traits of ULS systems challenge and undermine the fundamental assumptions of today's software …

Evaluating Network Analysis And Agent Based Modeling For Investigating The Stability Of Commercial Air Carrier Schedules, Sheila Ruth Conway

Engineering Management & Systems Engineering Theses & Dissertations

For a number of years, the United States Federal Government has been formulating the Next Generation Air Transportation System plans for National Airspace System improvement. These improvements attempt to address air transportation holistically, but often address individual improvements in one arena such as ground or in-flight equipment.

In fact, air transportation system designers have had only limited success using traditional Operations Research and parametric modeling approaches in their analyses of innovative operations. They need a systemic methodology for modeling of safety-critical infrastructure that is comprehensive, objective, and sufficiently concrete, yet simple enough to be deployed with reasonable investment. The methodology …

Pico-Satellite Integrated System Level Test Program, Marcus A. Ruddy

Master's Theses

Testing is an integral part of a satellite’s development, requirements verification and risk mitigation efforts. A robust test program serves to verify construction, integration and assembly workmanship, ensures component, subsystem and system level functionality and reduces risk of mission or capability loss on orbit.

The objective of this thesis was to develop a detailed test program for pico-satellites with a focus on the Cal Poly CubeSat architecture. The test program established a testing baseline from which other programs or users could tailor to meet their needs. Inclusive of the test program was a detailed decomposition of discrete and derived test …

Ground Support Equipment For Northrop Grumman Massive Heat Transfer Experiment, Michael A. Manuel, Christopher J. Sparber, Greg A. Trent

Aerospace Engineering

California Polytechnic State University students designed, built, and certified ground support equipment for the Northrop Grumman Massive Heat Transfer Experiment. The Cal Poly design team built the 10000, 20000, and 30000 assemblies to meet Northrop Grumman requirements. The requirements included interface limitations, design load factors, delivery, and testing specifications. The design process consists of requirements generation, conceptual design, preliminary design, design reviews, manufacturing, and certification. The hardware was successfully completed and is used at the Johnson Space and Kennedy Space Center.

Fusion Of Imprecise Qualitative Information, Florentin Smarandache, Xinde Li, Xianzhong Dai, Jean Dezert

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper, we present a new 2-tuple linguistic representation model, i.e. Distribution Function Model (DFM), for combining imprecise qualitative information using fusion rules drawn from Dezert-Smarandache Theory (DSmT) framework. Such new approach allows to preserve the precision and efficiency of the combination of linguistic information in the case of either equidistant or unbalanced label model. Some basic operators on imprecise 2-tuple labels are presented together with their extensions for imprecise 2-tuple labels. We also give simple examples to show how precise and imprecise qualitative information can be combined for reasoning under uncertainty. It is concluded that DSmT can deal …

Application Of Systems Engineering To Rapid Prototyping For Close Air Support, John M. Colombi, Richard G. Cobb

Faculty Publications

Twenty-first century military operations have brought forth many new challenges for the Armed Forces of the United States. One such challenge is with new operating environments, where current systems are not always effective. While it is desirable to apply a systems engineering approach to best meet critical user needs, there may be a misconception that systems engineering requires a lengthy and detailed process not nimble enough for a rapid prototyping effort. This article describes how a classic systems engineering methodology was successfully tailored to the rapid development of potential material solutions to meet a critical operational need. Key observations are …

Unmanned Aircraft System Propulsion Systems Technology Survey, Christopher Griffis, Timothy Wilson, Jeffrey Schneider, Peter Pierpont

Publications

This technology survey is an investigation of various propulsion systems used in Unmanned Aircraft Systems (UAS). Discussed are existing and near-future propulsion mechanisms of UAS, such as reciprocating piston engines, Wankel rotary engines, gas turbine engines, rocket-powered systems, electric motors, and battery-based systems. Also discussed are systems that use proton exchange membrane fuel cells, photovoltaics, ultracapacitors, and propellers. Each system is described in reference to a larger conceptual framework, with instances and profiles of existing UAS employing the system being described. Advantages and disadvantages of each type of propulsion system are identified along with associated technical issues and their respective …

A Study Of Decision Analysis Methods In Aerospace Technology Assessments, Sharon Monica Jones

Engineering Management & Systems Engineering Theses & Dissertations

Managers of aerospace technology programs and projects are faced with the challenge of making technology portfolio decisions under conditions of limited data, rapidly changing macro level factors and organizational uncertainties. To help make these technology investment decisions, some aerospace managers and analysts have used techniques from the field of decision analysis. In addition, there have been a limited number of research studies of real decision problems.

This dissertation presents the results of a non-experimental examination of the use of decision analysis methods for the assessment of aerospace technology portfolios. A web-based survey instrument was developed based on the results of …

Operationally Responsive Space (Ors): An Architecture And Enterprise Model For Adaptive Integration, Test And Logistics, Jeff A. Alexander, Martha Charles-Vickers, Talbot L. Smith, Michael L. Vickers

Theses and Dissertations

The capability to rapidly deploy tactical satellites to meet a Joint Force Commander's immediate battlespace requirements is a well-documented joint capability need. Key U.S. strategic documentation cites the need for the capability to maintain persistent surveillance or an "unblinking eye" over battlespace and to rapidly reconstitute critical space capabilities to preserve situational awareness. The warfighter requires a tactical space-based deployment capability which employs a request to launch and operational deployment window of 90 to 120 days. This master's thesis executed two (2) major areas of work: apply, and reinforce the Operationally Responsive Space (ORS) mission tasks using the Joint Capabilities …

Stability Analysis Of Jump-Linear Systems Driven By Finite-State Machines With Markovian Inputs, Sudarshan S. Patilkulkarni

Electrical & Computer Engineering Theses & Dissertations

A control system with a fault recovery mechanism in the feedback loop and with faults occurring in a non-deterministic manner can be modeled as a class of hybrid systems, i.e., a dynamical system switched by a finite-state machine or an automaton. When the plant and controller are linear, such a system can be modeled as a jump-linear system driven by a finite-state machine with a random input process. Such fault recovery mechanisms are found in flight control systems and distributed control systems with communication networks. In these critical applications, closed-loop stability of the system in the presence of fault recoveries …

Development Of An Expert Judgement Elicitation And Calibration Methodology For Risk Analysis In Conceptual Vehicle Design, Resit Unal, Charles Keating, Bruce Conway, Trina Chytka

Engineering Management & Systems Engineering Faculty Publications

A comprehensive expert-judgment elicitation methodology to quantify input parameter uncertainty and analysis tool uncertainty in a conceptual launch vehicle design analysis has been developed. The ten-phase methodology seeks to obtain expert judgment opinion for quantifying uncertainties as a probability distribution so that multidisciplinary risk analysis studies can be performed. The calibration and aggregation techniques presented as part of the methodology are aimed at improving individual expert estimates, and provide an approach to aggregate multiple expert judgments into a single probability distribution. The purpose of this report is to document the methodology development and its validation through application to a reference …

Optimizing The Space Transportation Information Network: A Training Model For An Innovative Project At Nasa Glenn Research Center, Jeff Rybak

All-Inclusive List of Electronic Theses and Dissertations

The Space Transportation Information Network (STIN) was developed to solve the challenge of managing a geographically disparate NASA program. By its nature, this "enterprise information portal" enhances communication, saves time, and retains expertise as a form-driven knowledge management data base. However, for the Revolutionary Turbine Accelerator Project (RTA) led by the NASA Glenn Research Center, a comprehensive STIN training program, designed specifically for RTA, had never been instituted. To help optimize STIN for this population, a training intervention model was designed and developed to clarify the purpose, policy, and technical usability of STIN. As the front-end to the training development …

Calibrating Expert Assessments Of Advanced Aerospace Technology Adoption Impact, Bruce A. Conway

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation describes the development of expert judgment calibration methodology as part of elicitation of the expert judgments to assist in the task of quantifying parameter uncertainty for proposed new aerospace vehicles. From previous work, it has been shown that experts in the field of aerospace systems design and development can provide valuable input into the sizing and conceptual design of future space launch vehicles employing advanced technology. In particular (and of specific interest in this case), assessment of operations and support cost implications of adopting proposed new technology is frequently asked of the experts. Often the input consisting of …

A Five-Year Development Plan For The California Aviation Database, H.-S. Jacob Tsao

Faculty Publications

The California Aviation Database (CAvD) project was suggested by Caltrans Aeronautics Program to fulfill a need of the planners involved in aviation system planning and programming activities to locate and access aviation data and information in an efficient and comprehensive way. CAvD is being implemented in the form of an Internet website and is currently intended as a five-year project. However, the development can be accelerated, and the duration will depend on the available resources. CAvD is a joint project between the National Center of Excellence for Aviation Operations Research (NEXTOR) and the California Department of Transportation (Caltrans). Its primary …