Other Operations Research, Systems Engineering and Industrial Engineering Commons^™

Milk Collection Problem: Integrating The Traveling Salesman And Set Covering Problem - A Case Study In West Virginia, Usa, Md Rabiul Hasan

Graduate Theses, Dissertations, and Problem Reports (ETD)

Route determination for perishable products is complex due to its unique characteristics, such as limited shelf-life regulatory requirements, or possibility of getting damaged. This research investigates a novel problem of collecting raw milk from a rural network of dairy farms. The research problem is grounded in a real scenario of milk collection in West Virginia, USA. The milk in this scenario is produced by small farms incapable of realizing transportation economies of density out in mostly rural areas throughout the state. Maximum coverage area and milk processing overhead costs are used to identify suitable locations for intermediate milk collection centers …

Variability In Anesthesia And Its Implications For Improving Patient Safety, Joshua Michael Biro

All Dissertations

Improving patient safety in anesthesia has proven to be an arduous and challenging task. Despite the many strategies and interventions to improve patient safety that have been employed, patient harm in anesthesia remains a problem. The struggle to reduce patient harm in anesthesia is both attributable to and representative of the complexity of the anesthesia system. In navigating this complex system, anesthesia providers have different approaches to how they accomplish their work, which results in variability in anesthesia practice. This variability provides an immense challenge to designing and implementing efforts to improve patient safety, as rigid interventions are often met …

Developing Systems Engineering And Machine Learning Frameworks For The Improvement Of Aviation Maintenance, Fatine Elakramine

Theses and Dissertations

This dissertation develops systems engineering and machine learning models for aviation maintenance support. With the constant increase in demand for air travel, aviation organizations compete to maintain airworthy aircraft to ensure the safety of passengers. Given the importance of aircraft safety, the aviation sector constantly needs technologies to enhance the maintenance experience, ensure system safety, and limit aircraft downtime. Based on the current literature, the aviation maintenance sector still relies on outdated technologies to maintain aircraft maintenance documentation, including paper-based technical orders. Aviation maintenance documentation contains a mixture of structured and unstructured technical text, mainly inputted by operators, making them …

Accelerating Manufacturing Decisions Using Bayesian Optimization: An Optimization And Prediction Perspective, Taofeeq Olajire

Graduate Theses, Dissertations, and Problem Reports (ETD)

Manufacturing is a promising technique for producing complex and custom-made parts with a high degree of precision. It can also provide us with desired materials and products with specified properties. To achieve that, it is crucial to find out the optimum point of process parameters that have a significant impact on the properties and quality of the final product. Unfortunately, optimizing these parameters can be challenging due to the complex and nonlinear nature of the underlying process, which becomes more complicated when there are conflicting objectives, sometimes with multiple goals. Furthermore, experiments are usually costly, time-consuming, and require expensive materials, …

Practical Requirements Elicitation In Modern Product Development: A Multi-Case Study In Discontinuous Innovation, Michael King

Theses and Dissertations

Practical modern product development, specifically rapid, lean efforts to create new disrupting or specialized products, face constraints that require modified requirements elicitation (RE) techniques. Requirements elicitation conventions have not been updated to address the challenges of these approaches, and industry practitioners lack the tools to select the most efficient techniques. This study examines the RE approaches performed by three resource-limited teams conducting discontinuous new product development through a multi-case study to identify gaps between the literature and practice, with suggestions to fill them. Our findings suggest modern RE practices and challenges closely reflect those found by studies on RE in …

Towards Structured Planning And Learning At The State Fisheries Agency Scale, Caleb A. Aldridge

Theses and Dissertations

Inland recreational fisheries has grown philosophically and scientifically to consider economic and sociopolitical aspects (non-biological) in addition to the biological. However, integrating biological and non-biological aspects of inland fisheries has been challenging. Thus, an opportunity exists to develop approaches and tools which operationalize planning and decision-making processes which include biological and non-biological aspects of a fishery. This dissertation expands the idea that a core set of goals and objectives is shared among and within inland fisheries agencies; that many routine operations of inland fisheries managers can be regimented or standardized; and the novel concept that current information and operations can …

Systems Statistical Engineering – Hierarchical Fuzzy Constraint Propagation, Hengameh Fakhravar, Hesamoddin Tahami

Engineering Management & Systems Engineering Faculty Publications

Driven by a growing requirement during the 21st century for the integration of rigorous statistical analyses in engineering research, there has been a movement within the statistics and quality communities to evolve a unified statistical engineering body of knowledge (Hoerl & Snee, 2010). Systems Statistical Engineering research seeks to integrate causal Bayesian hierarchical modeling (Pearl, 2009) and cybernetic control theory within Beer's Viable System Model (S Beer, 1972; Stafford Beer, 1979, 1985) and the Complex Systems Governance framework (Keating, 2014; Keating & Katina, 2015, 2016) to produce multivariate systemic models for robust dynamic systems mission performance. (Cotter & Quigley, 2018) …

Improve Outcomes In Lean Six Sigma With Servant Leadership, David W. Hoffa, Chad Laux, Manal Alduraibi

International Conference on Lean Six Sigma

1. Purpose

The purpose of this study was to explore lean leadership within Lean Six Sigma (LSS). The objective of this paper was to explore how LSS program success might be improved by focusing Black Belt efforts on mentoring Green Belts with a servant leadership model. The importance of Green Belt projects is typically overlooked in the literature. The effects of prioritizing the development of Green Belts and building a culture of continuous improvement over the traditional Black Belt project focus is explored.

2. Design/Methodology/Approach

The methodology of this paper is inspired by the authors’ field experiences in managing LSS …

The Probability Of Success-Through Fault Tree Analytical Binomial Result, Tyleka Riddle

Night Flight: Online Literary Journal

Prestigious Appeal Rule of Thumb (Ear Drum Plugs)

In truant fashion, with proven accidental probabilistic perception for proposed cued facial expression recognition and voice commands without filtering. The estimated cost analysis for design and development generated from the enhanced project in the word "no”: Additionally, an audio noise effect size (ES) for desired level of comprehensive sensory receptors in sound reference to noisy party syndrome. Sytoss, (2019) "Resulting in a cocktail party theory for chalkboard distinction and conversation with applied facial recognition. As well as, the enhanced project management tool, EPMT, to provide output and input determination for higher-level acoustic …

Exploring How Prize Challenges Complement An Organization's Innovation Efforts, Ademir Vrolijk, Zoe Szajnfarber

CESUN Conference

prize challenge, open innovation, crowdsourcing, NASA, 3D Printed Habitat Challenge, additive manufacturing

Analytical Assessment Of Project Complexity: A Guide To Managing Projects Through Reduction Of Complexity, Christopher Vanarsdale

Dissertations, Master's Theses and Master's Reports

This research discusses the characteristics that make projects difficult to manage. Project inefficiencies and failures can be attributed to the structure of a system. Developing a measurement for complexity based on the number and nature of interactions in the system can allow project complexity to be reduced while still meeting project objectives. Previous research has identified characteristics or markers of complex systems but does not address how to measure or how to reduce a system’s complexity.

The objective of this dissertation is to develop a metric for complexity that assists project and emergency managers in reducing project complexity either by …

Size And Cost Reduction Of The Antenna 3000, Mario Mignott, Austin Deaver, Josh Madaris

Senior Design Project For Engineers

For our senior design project, we have partnered with Compass Technology Group to improve its Antenna 3000 manufacturing process. The Antenna we are working on is not actually called this, but due to NDA regulations, we will disguise it as the Antenna 3000. This will include finding a way to minimize material costs and labor hours involved to assemble this product together. Our minimum success criteria will be to reduce both the manufacturing time and materials' cost by 20%. Our primary approach to solving this problem will be to implement Lean Six Sigma practices such as the DMAIC principle.

Using …

Curriculum Optimization Via Activity-On-Node Network Modeling, Caroline Rhomberg

Industrial Engineering Undergraduate Honors Theses

University degree plans must be carefully planned so that they allow students the best chance of succeeding. Although for the better, with the advancement of technology and its incorporation into the classroom, it can be argued that the complexity and difficulty of some long-established engineering core classes has changed. With this trend certain combinations of engineering courses have become unfavorable in terms of course withdrawal and fail rates stemming from the interaction of course challenges. A wealth of data has been collected on this topic and will be utilized in this project. As one can imagine, the probability of success …

Intruder Preference And Route Selection: A Gis Data Approach, Griffin Mathews

Industrial Engineering Undergraduate Honors Theses

The Department of Homeland Security (DHS) requested an Engineering Research and Development Center study incorporating modeling and simulation to determine the selection, amount, and optimal location of sensor suites along the U.S. Border. The study objective is to maximize the probability of detection and apprehension of illegal elements attempting to enter. A study on intruders and their preferences were conducted to create an intruder preference value map to determine the preferred intruder routes taken after crossing the border. The results of this research were integrated into another study on the selection and simulation of sensor suites.

Intruder context and preferences …

Space Optimization And Process Improvement, Harith Alshareef

Senior Design Project For Engineers

Siemens Energy warehouse located in Suwanee, GA runs out of space in the Precision Lab due to rapid growth, seasonal peaks, and poor space utilization. The objective of the project is to redesign the Precision Lab layout and improve the tool assessment process to increase efficiency, productivity, and profitability.

The first solution is to add shelves in the Precision lab as well as the Torque lab and reduce the honeycombing effect on the shelves, which results in a 120%-150% increase in the storage space. We propose adding Tablets that include barcode scanner features to reduce the time spent on the …

Generalized Relay Network Design And Collaborative Dispatching In Truckload Transportation, Amin Ziaeifar

Operations Research and Engineering Management Theses and Dissertations

The truckload industry faces a serious problem of high driver shortage and turnover rate which is typically around 100\%. Among the major causes of this problem are extended on-the-road times where drivers handle several truckload pickup and deliveries successively; non-regular schedules and get-home rates; and low utilization of drivers dedicated time. These are by-and-large consequences of the driver-to-load dispatching method, which is based on point-to-point dispatching or direct shipment from origin-to-destination, commonly employed in the industry. In this dissertation, we consider an alternative dispatching method that necessitates careful design of an underlying network. In this scheme, a truckload on its …

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

Emergency Department Triage Process Improvement, Tessa Williams

Honors Theses

This senior design project was completed at Ascension Borgess Hospital located in Kalamazoo, Michigan. The mission of Ascension Borgess Hospital is to provide patient centered care. In 2018, 562 patients left the Emergency Department (ED) without being seen, which is a large safety risk for the patients and hospital. Based on this, as well as other obstacles, this project focused on meeting the mission of Ascension Borgess by improving key ED metrics that impact patient centered care. In order to meet that mission, this study aims to improve patient experience, safety and quality of the care provided, profitability for the …

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

Identification Of Reverse Engineering Candidates Utilizing Machine Learning And Aircraft Cannibalization Data, Marc Banghart

International Journal of Aviation, Aeronautics, and Aerospace

As military aircraft continue to remain in service and age, cannibalization of parts is increasing. Proactive identification of parts that are at high risk for cannibalization will inform engineering processes such as reverse engineering, thus allowing potentially reducing lead time to develop new parts. The research objective was to develop a causal structure that can be used for prediction of when cannibalization actions may occur. Bayesian networks allow encoding of causality between various descriptive features given a data set. The method utilized a tabu search algorithm, identified the underlying causal structure and the associated node probabilities. The method is then …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Decomposition Algorithms In Stochastic Integer Programming: Applications And Computations., Babak Saleck Pay

Theses and Dissertations

In this dissertation we focus on two main topics. Under the first topic, we develop a new framework for stochastic network interdiction problem to address ambiguity in the defender risk preferences. The second topic is dedicated to computational studies of two-stage stochastic integer programs. More specifically, we consider two cases. First, we develop some solution methods for two-stage stochastic integer programs with continuous recourse; second, we study some computational strategies for two-stage stochastic integer programs with integer recourse. We study a class of stochastic network interdiction problems where the defender has incomplete (ambiguous) preferences. Specifically, we focus on the shortest …

Dynamic Warehouse Optimization Using Predictive Analytics., Parvaneh Jahani

Electronic Theses and Dissertations

The forward area is a small area of a warehouse with a low picking cost. Two approaches that are investigated for selecting the SKUs of this area and the allocated space are the static and the dynamic approaches. In the case that decisions about the forward area are made periodically (e.g. yearly) and the products' demand patterns are completely ignored, the FRP is static. We developed two heuristics that solve the large discrete assignment, allocation, and sizing problem simultaneously. Replenishing the same product in the same place of the forward area brings about a ``Locked" layout of the fast picking …

Development Of An Associate Degree Level Course On Lean, Jeremy Espinoza

Master of Technology Management Plan II Graduate Projects

Lean training and education has become a focal point in both industry and the realm of academics; however, the need within the industry remains, and oftentimes companies must take on the additional and high expense of training new graduates once they enter the workforce. Often, the classes that students study in the lean methodology, if any are studied at all, are taught within other disciplines, and the instruction is in a general sense as opposed to in depth and hands on. Within the past eight years it has been referenced in different academic articles that students are not coming into …

The Context Of Tool Control In An Aircraft Assembly Environment Related To Productivity, Taylor Jay Sisson

KSU Journey Honors College Capstones and Theses

The aircraft industry focuses a large portion of its resources on tool control during the assembly of aircraft. Tool control is a strict process that demands time from the assembly process. This time is removed from the value-added time spent actually assembling the aircraft. A study at Lockheed Martin conducted in the Spring of 2016 is discussed that examines the time spent on tool control. Tool control is necessary in aircraft assembly to prevent tools from entering compartments of the aircraft. If such an event occurs, the tool may damage the aircraft. All aircraft assembly processes must be tool controlled, …

Improving The Security Of Wireless Sensor Networks, Mauricio Tellez Nava

Masters Theses, 2010-2019

With the rapid technological advancements of sensors, Wireless Sensor Networks (WSNs) have become the main technology for the Internet of Things (IoT). We investigated the security of WSNs in an environmental monitoring system with the goal to improve the overall security. We implemented a Secure Temperature Monitoring System (STMS), which served as our investigational environment. Our results revealed a security flaw found in the bootstrap loader (BSL) password used to protect firmware in the MSP430 MCU chips. We demonstrated how the BSL password could be brute forced in a matter of days. Furthermore, we illustrate how an attacker can reverse …

Detecting Periods Of Flight With High Task Load, James R. Parkinson, Steven J. Landry, Quang Dao, Caitlin Surakitbanharn

The Summer Undergraduate Research Fellowship (SURF) Symposium

Tools that predict dangerous working conditions empirically in the cockpit could greatly improve aviation safety. In an effort to lay the groundwork for such tools, this study will investigate whether a link exists between task load and pilots’ control strategies, their biometric data, and their planes’ position data. Using X Plane simulation software, an experiment will be run in which licensed pilots will fly a 3-nautical-mile approach into Mineta San Jose International Airport 4 times, under different task load conditions. During the flight, participants’ pupil diameters will be recorded along with the simulated aircraft position data and cognitive control modes. …

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

A Multidisciplinary Techno-Economic Decision Support Tool For Validating Long-Term Economic Viability Of Biorefining Processes, Sumesh Sukumara

Theses and Dissertations--Chemical and Materials Engineering

Increasing demand for energy and transportation fuel has motivated researchers all around the world to explore alternatives for a long-term sustainable source of energy. Biomass is one such renewable resource that can be converted into various marketable products by the process of biorefining. Currently, research is taking strides in developing conversion techniques for producing biofuels from multiple bio-based feedstocks. However, the greatest concern with emerging processes is the long-term viability as a sustainable source of energy. Hence, a framework is required that can incorporate novel and existing processes to validate their economic, environmental and social potential in satisfying present energy …

Applying Sustainability From A Systems Perspective:, Timothy Brophy

Master's Theses

Becoming sustainable is no longer an option. Current industry methods will not be able to support the necessary changes our growing society demands. In order to keep up with ever increasing demands industry will be aimed toward making major system changes toward a fully sustainable model. As of right now only basic sustainability actions have been put in place. Industry needs to make a strategic change toward resilient systems with an end goal of evolving into fully biomimic systems. This thesis covers a brief history of production leading to the Industrial Revolution which created a need for increased sustainability efforts. …