Other Operations Research, Systems Engineering and Industrial Engineering Commons^™

Repeatability Case Study Of The 3d Printer In The School Of Engineering And Applied Science Lab, Naif Faleh S. Albaiji

Masters Theses & Specialist Projects

3DP (three-dimensional printing) technologies have become more than just a tool to help companies with prototyping and designing in the pre-production stage. Some firms have already implemented 3DP technology to produce parts and end-use products. However, there are several challenges and barriers that this technology must overcome to replace traditional manufacturing methods. One of the most significant obstacles associated with 3D printing is its low level of accuracy in variable repeatability when it comes to making separate batches of the same product. There are several arguable reasons behind this variation. Some of the factors that can influence repeatability are the …

Identification Of Reverse Engineering Candidates Utilizing Machine Learning And Aircraft Cannibalization Data, Marc Banghart

International Journal of Aviation, Aeronautics, and Aerospace

As military aircraft continue to remain in service and age, cannibalization of parts is increasing. Proactive identification of parts that are at high risk for cannibalization will inform engineering processes such as reverse engineering, thus allowing potentially reducing lead time to develop new parts. The research objective was to develop a causal structure that can be used for prediction of when cannibalization actions may occur. Bayesian networks allow encoding of causality between various descriptive features given a data set. The method utilized a tabu search algorithm, identified the underlying causal structure and the associated node probabilities. The method is then …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

A Multi-Period Facility Location Model For Service Organizations Operating In A Competitive Environment., Sven W. Brose

Electronic Theses and Dissertations

This thesis develops a multi-period, mathematical programming location model for facilities operating in a competitive environment. The objective is to maximize the profit in a variable demand environment. The solution of the problem can either be done in a robust or in a dynamic manner. A robust solution methodology forecasts the demand for all the periods in the planning horizon and provides a robust solution that may be suboptimal for any given period, but optimal when all the periods are taken into consideration. A problem with this approach is that it requires accurate forecast of demand for multiple periods into …

Decomposition Algorithms In Stochastic Integer Programming: Applications And Computations., Babak Saleck Pay

Theses and Dissertations

In this dissertation we focus on two main topics. Under the first topic, we develop a new framework for stochastic network interdiction problem to address ambiguity in the defender risk preferences. The second topic is dedicated to computational studies of two-stage stochastic integer programs. More specifically, we consider two cases. First, we develop some solution methods for two-stage stochastic integer programs with continuous recourse; second, we study some computational strategies for two-stage stochastic integer programs with integer recourse. We study a class of stochastic network interdiction problems where the defender has incomplete (ambiguous) preferences. Specifically, we focus on the shortest …

Development Of An Associate Degree Level Course On Lean, Jeremy Espinoza

Master of Technology Management Plan II Graduate Projects

Lean training and education has become a focal point in both industry and the realm of academics; however, the need within the industry remains, and oftentimes companies must take on the additional and high expense of training new graduates once they enter the workforce. Often, the classes that students study in the lean methodology, if any are studied at all, are taught within other disciplines, and the instruction is in a general sense as opposed to in depth and hands on. Within the past eight years it has been referenced in different academic articles that students are not coming into …

Application Of Smart Factory Design In Nuclear Energy Industry With Focus On Safety, Olivia Crasta, Cem Yilmaz

Engagement & Service-Learning Summit

No abstract provided.

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

Polyparking, Christopher Blackmer, Michael Suttie

Biomedical Engineering

The purpose of this senior project is to analyze the various options for the implementation of a parking lot information system on the California Polytechnic State University, San Luis Obispo campus. This system would involve three main components: physical counting hardware, a database and analysis organization system, and a user interface for disseminating the gathered information. The project investigates and provides commentary on various available and commonplace systems, and the benefits and drawbacks of these systems. During the course of the project, a flexible database and user-interface was developed in Microsoft Access, which will allow counter output to be gathered …

Using Modelling And Simulation To Improve Elderly Care In Ireland: A Case Study, Mohamed Ragab, Wael Rashwan, Waleed Abo-Hamad, Amr Arisha

Articles

Health care services both globally and domestically - are encountering critical issues due to the increasing demand for services at the time of economic recession. Hospital performance is subject to many constraints, and planning is made more difficult by the complexity and uncertainty of demand. Population ageing is creating immense pressures on healthcare facilities across the world, leaving them struggling to cope with the growing demand for elderly healthcare services. Current demand-supply gaps result in prolonged waiting times for patients and substantial cost burdens for healthcare systems due to delayed discharges. This paper reports on a project that uses modelling …

Investigation Into The Measure, Correlate And Predict Methodologies Used In Wind Farm Design Software, Brendan O'Sullivan

Theses

This paper is focused on the Measure Correlate and Predict (MCP) methodologies used to estimate long term wind resource at a prospective site. The first common step in all MCP methodologies is a successful wind measurement campaign at the prospective site. This campaign involves the erection of a wind measurement mast (ideally to the hub height of the proposed turbine) and careful selection of booms, mountings and anemometers. The wind measurement campaign is a vital part of the process as the correlation and prediction analysis is only as accurate as the measured wind data. Correlation is a measure of the …

Evaluating Food Safety Systems Development And Implementation By Quantifying Haccp Training Durability, Marienne A. Anandappa

Theses and Dissertations--Animal and Food Sciences

HACCP-based food safety programs have been widely acclaimed, accepted and implemented as an effective means of managing food safety risks. While HACCP training is a cornerstone of managing HACCP programs, there is little information about the effectiveness of HACCP training and the durability of HACCP knowledge. Findings reveal a link between involvement level in HACCP activities and the accuracy of HACCP knowledge over time. Opportunities for peer training in HACCP, irrespective of overall experience in the food industry provide favorable circumstances for maintaining accuracy of HACCP knowledge. The optimal window for engaging employees in HACCP is directly following the completion …

Development And Validation Of A Model For Granular Material Volume Measurements, Pourya Fasounaki

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Keeping inventory record of packed grains in silos poses challenges since the bulk material’s different segments do not discharge uniformly, leading to formation of random peaks and valleys on the surface. To facilitate obtaining accurate volume measurement of the grains by taking into account this non-linear behavior on the surface, laser or plumb-bob level-sensing devices are employed at different part of the surface to probe the level of material under those regions.

The main goals of this research is to study the behavior of granular material in silo while discharging downward and by doing so, differentiate certain flow patterns formed …

A Study Of Queuing Theory In Low To High Rework Environments With Process Availability, Adam J. Brown

Theses and Dissertations--Manufacturing Systems Engineering

In manufacturing systems subject to machine and operator resource constraints the effects of rework can be profound. High levels of rework burden the resources unnecessarily and as the utilization of these resources increases the expected queuing time of work in process increases exponentially. Queuing models can help managers to understand and control the effects of rework, but often this tool is overlooked in part because of concerns over accuracy in complex environments and/or the need for limiting assumptions. One aim of this work is to increase understanding of system variables on the accuracy of simple queuing models. A queuing model …

A Microsimulation Of Traffic, Parking, And Emissions At California Polytechnic State University – San Luis Obispo, Steven Michael Kilbert

Master's Theses

Traffic and parking congestion are significant issues at many universities nationwide. The delays experienced result in wasted time, money, and fuel for students, faculty and staff, not to mention the negative contributions to the environment. This paper quantifies the amount of vehicle emissions generated during an average morning peak hour in the university environment. Using VISSIM and CMEM microsimulation packages, a model is created for California Polytechnic State University- San Luis Obispo to aggregate the collective transportation behaviors and practices of the campus and recognize the implications these behaviors pose on the transportation network as a whole. Reasonable estimates are …

The Effects Of Anti-Price Gouging Legislation On Supply Chain Dynamics, Jason Edward Maynard

Master's Theses

The purpose of this thesis is to model the effects of anti-price gouging (APG) legislation on the costs to businesses during the recovery period of a disaster. A system dynamics model of a business’s replenishment procedures is used to simulate the effects of APG legislation on business performance. Economists have published expansive research on the effects of price ceilings on supply and demand, but there is little research evidence on the operational consequences of price ceiling legislation on business costs. APG legislation increases consumer’s forward buying and shortage gaming after a disaster by removing price incentives to be frugal. Forward …

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Cable Time Estimation Database, Joshua L. Okerman

Industrial and Manufacturing Engineering

The use of time standards are the basis for a high efficiency system in the manufacturing environment. This project will investigate the process followed to design and develop a database used to calculate accurate cable assembly time standards used for scheduling at General Atomics. This project will then justify the use of the Cable Time Estimation Database, through an economic analysis compared to the current methods applied.

Preference Driven University Course Scheduling System, Heather A. Bellardo

Master's Theses

University course planning and scheduling is the process of determining what courses to offer, how many sections are needed, determining the best term to offer each section, assigning a faculty member to instruct each section, and scheduling each section to a timeslot to avoid conflicts. The result of this task has an impact on every student and faculty member in the department. The process is typically broken down into three major phases: course offering planning, faculty assignment to planned course sections, and course scheduling into timeslots.

This thesis looks at each of these phases for the Industrial and Manufacturing department …

Layout And Procedure Re-Design Of Dcpp Receiving Warehouse, Nicole Elizabeth Riegel

Industrial and Manufacturing Engineering

The receiving warehouse at Diablo Canyon Power Plant, owned by Pacific Gas and Electric, serves as a place to recognize the receiving of items into an ERP system, repackage and label items for long-term storage, and organize items for delivery inside the secured area. The warehouse managers would like to redesign the layout and procedures of the warehouse. Currently items are not received, scanned, or shipped in a timely manner. The flow of people and items in the receiving and shipping area is chaotic and space is limited especially during plant outages. The objective of this project is to: • …

Non-Profit Management System For Friends Of The Elephant Seal, Matthew Justus, Robert Macasi, Jeff Zinn

Industrial and Manufacturing Engineering

Friends of the Elephant Seal (FES) are a non-profit organization based in San Simeon, California. Their current method of tracking and reporting information is inefficient. A project was proposed to develop a new information management system for FES, install it at their office and provide training including a user manual. The project was divided into three parts: Database Design and Implementation; User Interface Design and Ergonomics; and User Manual & Help System.

The objective of the project was to design a user-friendly interface specifically for the FES worker that allowed for easy access to data entry functions, reporting functions and …

Alleviation Of Spindle Transfer, Blake Ochs, Whitney Bone

Industrial and Manufacturing Engineering

Haas Automation, Inc. is one of the largest CNC machine tool builders in the world. They produce an assortment of machines that come in many different sizes, however, all machines have in common the central tool that allows them to perform their surfacing and bore functions, the spindle. As with the machines themselves, the spindles can also range in size depending on the type of machine they are going into. These spindles are assembled step by step and as components are added to them, several models become so heavy that it is not feasible to have operators lift them by …

Course Portfolio - Discrete Event Simulation, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This course portfolio, written by Dr. Paul Savory, provides an overview of his Discrete Event Simulation course at the University of Nebraska-Lincoln. It offers an overview of the course goals, a summary of the classroom activities for achieving them, and a detailed assessment of student learning. He highlights his introduction of the simul8 programming environment to his students. In addition to exploring his students’ learning, Dr. Savory also explores different approaches for documenting his teaching by including multimedia clips (video and audio), uses graphs, uses color, and incorporates images. The resulting portfolio is one that can be reviewed, shared, and …

Rubric For Presentation Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow classmates and myself to offer an evaluation or assessment of a student classroom presentation. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Report Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to formalize the evaluation or assessment of a project report. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Self-Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow each member of a project team to offer a self-assessment of their own performance on the projects. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Ruberic For Project Team Member Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow team members for course projects to offer an evaluation or assessment of the fellow members of their team. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Randomly Generating Manufacturing Flow Line Models Using Mathematica, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

To test heuristic algorithms and techniques, researchers need numerous datasets so as to measure effectiveness and improve approaches. This paper discusses using Mathematica, a mathematical programming language, for randomly generating the specifications for manufacturing flow line models. Important issues include determining an arrival rate to a flow line, the number of flow line stations, the number of parallel servers for each production station, and specifying the service time distributions and their associated parameters. The paper concludes with a discussion on generating more general types of simulation models.

Details And Description Of Operations Research, Paul Savory

Department of Industrial and Management Systems Engineering: Reports

The ambiguous term operations research was coined during World War II. A frequent substitute is management science. Operations research is a scientific approach to analyzing problems and making decisions. It uses mathematics and mathematical modeling on computers to forecast the implications of various choices and zero in on the best alternatives. This content paper provides an overview of operations research. It highlights operations research problems, methods for solving problems, different areas of operations research, and example problems.

Pre/Post Assessment Of Abilities, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

One approach to assess if students are learning in a course is to conduct a pre-test, post-test assessment of the course material. By comparing the two results, one can make an assessment of the knowledge learned in the course. For certain types of courses, it can be a challenge in defining an assessment instrument that measure student knowledge. This example is one I have developed for my IMSE 440/840 (Discrete Event Computer Simulation) course. Students are asked rate their ability for key course objectives defined on the course syllabus. I administer it on the first day of the course and …