Operational Research Commons^™

Spare Parts On Demand Using Additive Manufacturing : A Simulation Model For Cost Evaluation., Stefan Jedeck

Electronic Theses and Dissertations

Little is known about the impact of additive manufacturing in the spare part supply chain. A few studies are available, but they focus on specific parts and their applications only. A general model, which can be adapted to different applications, is nonexistent. This dissertation proposes a decision making framework that enables an interested practitioner/manager to decide whether using additive manufacturing to make spare parts on demand is economical when compared to conventional warehousing strategy. The framework consists of two major components: a general discrete event simulation model and a process of designing a wide range of simulation scenarios. The goal …

Toward A Theory Of Multi-Method Modeling And Simulation Approach, Mariusz A. Balaban

Computational Modeling & Simulation Engineering Theses & Dissertations

The representation via simulation models can easily lead to simulation models too simple for their intended purpose, or with too much detail, making them hard to understand. This problem is related to limitations of the modeling and simulation methods. A multi-method Modeling and Simulation (M&S) approach has the potential for improved representation by taking advantage of methods' strengths and mitigating their weaknesses. Despite a high appeal for using multiple M&S methods, several related problems should be addressed first. The current level of theoretical, methodological, and pragmatic knowledge related to a multi-method M&S approach is limited. It is problematic that there …

Using The Delta-Model For End-Stage Liver Disease To Improve The Decision-Making Process For The Donor Liver System, Joanne Chin

Walden Dissertations and Doctoral Studies

The purpose of this experimental research was to determine whether using delta-MELD as a criterion for the liver transplant patient selection process could improve the U.S. liver allocation system. This research closed a gap in current literature on the utility of delta-MELD for liver transplant patient selection. The frameworks of systems theory, the analytic hierarchy process, and the Kalman filter contributed to the development of 2 simulation models of the liver allocation system: one that used delta-MELD and one that did not use delta-MELD. The research question examined whether using delta-MELD could improve the liver allocation system by reducing the …

A Methodology For Scheduling Operating Rooms Under Uncertainty, Marbelly Paola Davila

USF Tampa Graduate Theses and Dissertations

An operating room (OR) is considered to be one of the most costly functional areas within hospitals as well as its major profit center. It is known that managing an OR department is a challenging task, which requires the integration of many actors (e.g., patients, surgeons, nurses, technicians) who may have conflicting interests and priorities.

Considering these aspects, this dissertation focuses on developing a simulation based methodology for scheduling operating rooms under uncertainty, which reflects the complexity, uncertainty and variability associated with surgery.

We split the process of scheduling ORs under uncertainty into two main components. First, we designed a …

Capacity Planning For Elderly Care In Ireland Using Simulation Modeling, Mohamed Ragab, Waleed Abo Hamad, Amr Arisha

Conference papers

Global population aging is creating an immense pressure on healthcare facilities making them unable to cope with the growing demand for elderly healthcare services. Current demand-supply gaps result in prolonged waiting times for patients and substantial cost burdens for healthcare systems due to delayed discharges. This paper describes a project aimed at presenting modeling and simulation to address elderly care pathways within the Irish healthcare sector. The management of frail patients admitted to acute hospitals and the introduction of the new intermediate care beds are alternative interventions that healthcare executives are interested in simulating to examine their impact on the …

A Study Of Queuing Theory In Low To High Rework Environments With Process Availability, Adam J. Brown

Theses and Dissertations--Manufacturing Systems Engineering

In manufacturing systems subject to machine and operator resource constraints the effects of rework can be profound. High levels of rework burden the resources unnecessarily and as the utilization of these resources increases the expected queuing time of work in process increases exponentially. Queuing models can help managers to understand and control the effects of rework, but often this tool is overlooked in part because of concerns over accuracy in complex environments and/or the need for limiting assumptions. One aim of this work is to increase understanding of system variables on the accuracy of simple queuing models. A queuing model …

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Course Portfolio - Discrete Event Simulation, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This course portfolio, written by Dr. Paul Savory, provides an overview of his Discrete Event Simulation course at the University of Nebraska-Lincoln. It offers an overview of the course goals, a summary of the classroom activities for achieving them, and a detailed assessment of student learning. He highlights his introduction of the simul8 programming environment to his students. In addition to exploring his students’ learning, Dr. Savory also explores different approaches for documenting his teaching by including multimedia clips (video and audio), uses graphs, uses color, and incorporates images. The resulting portfolio is one that can be reviewed, shared, and …

Formal Verification Of Urban Traffic System Using The Concept Of Fuzzy Workflow Simulation, Manuj Darbari, Abhay Kumar Srivastava, Sanjay Medhavi

Journal of International Technology and Information Management

Modeling complex urban traffic system requires extensive use of workflow methodologies which can simulate almost real time traffic situations. Number of studies were done in the field of Urban Traffic Simulation like PLOTS, NETSIM and PALAMICS but none of them could provide a real formal solution. Our paper proposes a methodology using Fuzzy Petri nets for modeling real time traffic system. Fuzzy Petrinets are also visualised and tested by using Flow- Charter and HPSIM software packages. These packages help in providing successive iterations of process model for further refinement.

Details And Description Of Operations Research, Paul Savory

Department of Industrial and Management Systems Engineering: Reports

The ambiguous term operations research was coined during World War II. A frequent substitute is management science. Operations research is a scientific approach to analyzing problems and making decisions. It uses mathematics and mathematical modeling on computers to forecast the implications of various choices and zero in on the best alternatives. This content paper provides an overview of operations research. It highlights operations research problems, methods for solving problems, different areas of operations research, and example problems.

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Process Modeling For Simulation, John Ryan, Cathal Heavey

Articles

This paper discusses shortfalls in relation to the requirements gathering phases of simulation. While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the requirements gathering phase. This is surprising as it has been reported by several researchers that the requirements phase can absorb twice as much resources as the coding phase. There are numerous process modeling tools available (over 100) that can and have been used to support the requirements phase of simulation. This paper provides a selective review of some of the most important in relation …

Development Of A Process Modelling System For Simulation, John Ryan

Other resources

This thesis details the development of a process modelling technique to aid a simulation model developer during the requirements gathering and conceptual modelling phases of a simulation project.

There are a number of process modelling techniques available that are capable of being used during such phases of a simulation project, however there is currently a lack of process modelling techniques developed specifically to aid a simulation model developer in capturing, representing and communicating information and systems issues to persons involved in the operation of discrete systems under investigation.

A detailed review of the literature related to techniques capable of supporting …

A Template-Based Conceptual Modeling Infrastructure For Simulation Of Physical Security Systems, Ashu Guru, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Although simulation is one of the most innovative and cost-effective tools for modeling and analyzing a system, simulation studies often fail to provide any useful results. One reason is attributed to the fact that model formulation depends on the skills of the analyst. This paper describes a research to develop a conceptual modeling infrastructure to assist a simulation analyst in specifying components for studying physical security systems. The modeling framework has been programmed as an internet-based web application. Using the application, the successful development and implementation of a physical security simulation model will be aided by a defined scientific methodology …

A Template-Based Conceptual Modeling Infrastructure For Simulation Of Physical Security Systems, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Although simulation is one of the most innovative and cost-effective tools for modeling and analyzing a system, simulation studies often fail to provide any useful results. One reason is attributed to the fact that model formulation depends on the skills of the analyst. This paper describes a research to develop a conceptual modeling infrastructure to assist a simulation analyst in specifying components for studying physical security systems. The modeling framework has been programmed as an internet-based web application. Using the application, the successful development and implementation of a physical security simulation model will be aided by a defined scientific methodology …

Review Of The Opnet It Guru Software, Jeng-Chung Victor Chen

Journal of International Technology and Information Management

The OPNET IT GURU has been in existence for years and designed to be used for the industry and the academics. The simulation software is now in version 10.0 and equipped with abundant features such as: modeling network topology and traffic, application impact assessment, and server capacity planning. The features of modeling network topology and traffic are ideal for network engineers to experiment different kinds of scenarios before implementation of any networks, which in turn could cost the organizations less on the IT budget. The application impact assessment is useful when measuring the end-to-end time of the deployed or to-be-deployed …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

This paper presents an integrated simulation and activity-based management approach for determining the best sequencing scheme for processing a part family through a manufacturing cell. The integration is illustrated on a loop or U-shaped manufacturing cell and a part family consisting of four part types (A, B, C, and D). Production requirements for the cell demand that part batches be processed one type at a time. For example, all part A’s are processed until weekly demand is met, then part B’s, etc. The objective of this example is to determine the best part sequence (e.g., ABCD, DCBA or CABD). In …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

Discrete-event simulation is one of the most effective techniques for analyzing a manufacturing system. Unfortunately, little attention is given to using simulation models to estimate the economic impact of a proposed system configuration. This paper defines how activity-based costing (ABC) concepts can be incorporated into a discrete-event simulation model. Special emphasis is on demonstrating how decision making can be aided by having the simulation create a detailed “Bill of Activity” describing costs associated with manufacturing a part. The integration of ABC and simulation is illustrated by evaluating the impact of a proposed manufacturing cell configuration. The additional costing information aids …

A Web-Based Interface For Storing And Executing Simulation Models, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

The dominance of the Internet in the development of information and communication technology has made Web-based distributed solutions increasingly attractive. Apart from providing other services, the World Wide Web is being looked upon as an environment for hosting modeling and simulation applications. SIMAN is a simulation language that allows users to simulate discrete and continuous systems. In this research, a web-based interface or toolkit has been developed for storing and executing SIMAN simulation models over the Internet. This toolkit consists of a World Wide Web interface to SIMAN and a web-accessible database for storing user models. It provides users an …

A Web-Based Interface For Storing And Executing Simulation Model, Ashu Guru, Paul Savory, Robert Williams

Department of Industrial and Management Systems Engineering: Faculty Publications

The dominance of the Internet in the development ofinformation and communication technology has madeWeb-based distributed solutions increasingly attractive.Apart from providing other services, the World Wide Webis being looked upon as an environment for hostingmodeling and simulation applications. SIMAN is asimulation language that allows users to simulate discreteand continuous systems. In this research, a web-basedinterface or toolkit has been developed for storing andexecuting SIMAN simulation models over the Internet.This toolkit consists of a World Wide Web interface toSIMAN and a web-accessible database for storing usermodels. It provides users an easy-to-use environment fordeveloping text-based simulation models using the SIMANsimulation language. It also …

Simulation Modeling Presentations: The Life Cycle, Edward Yellig, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

A typical large scale simulation modeling project spans many months and encompasses activities such as problem definition, data collection, model development, experimentation, and scenario analysis. During the life cycle of a simulation project, numerous presentations are made to many different types of audiences. The purpose of these presentations will vary from seeking project approval, requesting information, discussing simulation model features, verifying the model, validating the model, presenting the experimental results, and offering model conclusions. This paper will discuss presentation techniques we used during a year-long simulation-modeling project. We will highlight techniques used for defining the purpose of each presentation, identifying …

Using Simulation To Derive Activity-Based Costing Estimates, Paul Savory, Robert Williams

Department of Industrial and Management Systems Engineering: Faculty Publications

This presentation showcases integrating activity based costing into the development of a SIMAN simulation of a manufacturing system.

Using Bayesian Statistics In Operational Testing, Thuan H. Tran

Theses and Dissertations

This research explored the applicability of Bayesian methods to the problem of determining the reliability of a series system, a parallel system, and a bridge system. The time to failure of each component in each system is assumed to be exponentially distributed. A basic exponential case and a basic binomial case are also evaluated. In general, using simulated data and real data when possible, the Bayesian methods produced confidence intervals that were much tighter than the classical inference methods, thus allowing a decision maker to have higher confidence in making a decision. System level data and aggregated component level data …

Simulation Model Of Fighter Pilot Assignment Process, Anthony J. Hutfles

Theses and Dissertations

This thesis analyzes the effect Continental United States (CONUS) Time on Station (TOS) has on filling critical rated assignments. A SIMSCRIPT II.5 simulation model of the F15 and F16 pilots assignment process was developed. The simulation tested the effect of changing CONUS TOS from 3 years to 6 years in half year increments. Analysis of the number of unfilled rated assignments from simulation runs of 10 years in length indicated that changing CONUS TOS by itself has no statistically significant effect on model's output. The analysis was expanded to a 2(2) factorial experimental design using CONUS TOS and Total Active …

An Integrated Approach To Simulation And Activity-Based Costing For Evaluating Alternative Manufacturing Cell Designs, Robert Williams, Paul Savory, Rodney Rasmussen

Department of Industrial and Management Systems Engineering: Faculty Publications

One effective technique for improving manufacturing efficiency involves the application of group technology part families and manufacturing cells. Selection of the best or optimum configuration of the manufacturing cell relies on the experience and judgment of the cell designer. This paper describes how activity-based costing (ABC) concepts can be integrated into a discrete-event simulation model and be used to evaluate manufacturing cell configurations. The output of the combined ABC simulation model provides a detailed “Bill of Activity” which allows the cell designer to consider costs as a critical factor in the cell design problem. Alternative cell configurations studied in this …

Simulating Queue Scheduling Policies For A Spacecraft Simulator, Paul Savory, Gene Saghi

Department of Industrial and Management Systems Engineering: Faculty Publications

The mission of the Cassini spacecraft is a unique opportunity to gain insights into major scientific questions about Saturn, the creation of the solar system, and the conditions that led to life on Earth. In preparation for the launch, NASA's Jet Propulsion Laboratory developed a software simulator to emulate the hardware data-control system of the spacecraft. Its primary use is to validate and verify commands that will be transmitted to the spacecraft. To improve the performance of the simulator, we used the SIMAN simulation language to model numerous queue-scheduling policies. Implementation of the simulation results combined with a software-code redesign …

Cycle Time Estimation For Simulating A Tandem Queueing Systems Using Aggregation Techniques, Paul Savory, Gerald Mackulak

Department of Industrial and Management Systems Engineering: Faculty Publications

One approach to simulating a single-server tandem queuing system is to explicitly model each of the production stages. In this paper, we apply queueing theory, a recursive algorithm, and composite random number sampling to develop an equivalent aggregate representation consisting of only a single production stage. Preliminary test results indicate that the aggregation works well for estimating the mean and variability of the total cycle time.

Using Mathematica To Aid Simulation Analysis, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

As computer power has increased, so has the capability of software developers to write programs that assist people with time-consuming tasks. Mathematica is such a program. The objective of this paper is to demonstrate how Mathematica, a symbolic programming environment, can be used to aid simulation analysis. In addition to a general discussion of Mathematica’s uses, advantages, and disadvantages, several examples will be presented. The examples include using Mathematica for distribution fitting, queueing analysis, random number generation, and creating a surface plot for optimization.