Operational Research Commons^™

A Multi-Objective Optimization Framework For Equitable Stormwater Management In Urbanizing Rural Communities, Harry L. Wilson

Industrial Engineering Undergraduate Honors Theses

Due to limited technical and financial resources, urbanizing rural communities often face growing stormwater management challenges while undergoing rapid development. This thesis proposes a mixed-integer linear programming (MILP) framework that integrates topography-driven stormwater flow behavior, infrastructure placement constraints, and multiple planning objectives to support cost-effective stormwater infrastructure decisions. Our model accounts for budget constraints, gravity-driven surface water flow, infiltration capacity, and spatial contiguity requirements to determine optimal pond placements that balance flood reduction and implementation costs. A synthetic discretized grid representing a small municipality is used to demonstrate model behavior under varying rainfall and topographic conditions. Results demonstrate the framework's …

Multi-City Travel Routing Tool: Reducing Travel Costs And Time Spent Planning Using Apis, Trey R. Merreighn

Industrial Engineering Undergraduate Honors Theses

Travel planning is a time-consuming and ever-changing problem that can diminish the travel experience and greatly increase expenditure, if not done correctly. It is important to have an easy travel planning experience so you can enjoy the travel experience more and not waste time where it is not needed. This thesis aims to minimize the costs and time spent on travel planning using APIs and simple optimization models, creating a travel planning tool. This travel planning tool was developed in Java with the main API being Amadeus, this was combined with a greedy best-permutation heuristic to create the main route …

Optimizing College Food Pantry Locker Systems Through Simulation Techniques, Jacob W. Holmes

Industrial Engineering Undergraduate Honors Theses

Food insecurity affects 10.5% of households in the United States. Among those affected, college students are a group with increasing food insecurity. Through novel food pantry order methods, such as locker order systems, some effects of college food insecurity can be alleviated. The Jane B. Gearhart Full Circle Food Pantry (FCFP) at the University of Arkansas implemented a locker system, beginning in the Fall of 2020. There is a lack of investigation into locker management policies for pantries, such as how much time clients should be allowed to pick up orders after they are placed in lockers, how many lockers …

Open-Source Optimization For Green Last Mile Delivery And Other Applications, John Sooter

Industrial Engineering Undergraduate Honors Theses

Solving combinatorial optimization problems at scale and of sufficiently interesting context has historically required commercial solvers and access to proprietary company data. The development of performant open-source mathematical programming software and crowdsourced datasets has created an opportunity for individuals and enterprises alike to consider alternative solutions to problems with social and personal implications. This honors thesis represents a summary of my undergraduate research work, an application of optimization to three distinct problems connected to these developments. First, we present an optimization study of a last mile delivery system that shows optimization for energy consumption can generate vehicleindependent fuel savings at …

Lead Distribution Modeling For Supply Chains With A Large Number Of Items, Wesley Tate

Industrial Engineering Undergraduate Honors Theses

Adding randomness into a simulation model allows for a better understanding of the variation that can occur in a real-life setting. This paper documents the methodology used to recommend a set of distribution models to cover administrative and production lead times for the simulation program involving hundreds of thousands of items. The problem of distribution fitting for large datasets is addressed, with histograms, Q-Q, and P-P plots being used to verify models in addition to goodness-of-fit test statistics. Variable level reduction using frequency and distribution matching approaches are outlined followed by the use of random forest modeling to identify key …

Analyzing Vulnerabilities In The Northwest Arkansas Highway Network Using Mathematical Optimization, Brandon Jerome

Industrial Engineering Undergraduate Honors Theses

The highway and bridge network is a critical infrastructure that allows for the free transportation of citizens and enables truck-borne freight transportation. Disruption of this system could be caused by a terrorist attack, natural disaster, growth of population, required repairs and upgrades, or collapse caused by old age or malfunction. In the event of a disruption cities and regions can experience increased traffic and supply chain shortages, thus causing cascading effects throughout surrounding areas. With this motivation, we develop a network interdiction optimization model to identify a limited subset of roads that, if disrupted, causes the greatest increase in the …

Academic Advising Support Tool: An Optimization Approach, Spencer Loper

Industrial Engineering Undergraduate Honors Theses

More than ever, a college education is necessary to remain competitive in the job market. Therefore, colleges are dedicating numerous resources to ensure student success. Nonetheless, one of the most important factors of student success is proper academic advising. Students at the University of Arkansas and more specifically within the department of Industrial Engineering department are fortunate to have access to fantastic advising. However, given the volume of students, academic advisors do not have the time to talk through the nuance of every student’s long-term academic plan. The department does provide an eight-semester plan; however, students who have deviated from …

Comparing Actively Managed Mutual Fund Categories To Index Funds Using Linear Regression Forecasting And Portfolio Optimization, Luke Weiner

Industrial Engineering Undergraduate Honors Theses

The global investment industry offers a wide variety of investment products especially for individual investors. One such product, index funds, which are younger than actively managed mutual funds, have typically outperformed managed funds. Despite this phenomenon, investors have displayed a tendency to continue investing in actively managed funds. Although only a small percentage of actively managed funds outperform index funds, the costs of actively managed funds are significantly higher. Also, managed fund performances are most often determined by their fund category such as growth or real estate. I wanted to answer the following question for individual investors: can we …

Locating Drone Battery Supply Stations To Facilitate The Delivery Of Medical Supplies In Low And Middle-Income Countries, Madeline Suellentrop

Industrial Engineering Undergraduate Honors Theses

In the sub-Saharan region of Africa, the inability to perform emergency blood transfusions due to an inadequate blood supply has led to high fatality rates, especially among women and children. The prevalence of disease in this region limits the supply of local blood donations and, if blood is imported, then the region’s poor infrastructure inhibits fast distribution. There is a need for a technological update in the current process that overcomes the limitations of regional transportation, and drones present one promising solution for delivering small, lightweight items such as blood units. The current focus of this new delivery method is …

Regression Analysis Of Pacing When Running A Marathon, Hawkin Starke

Industrial Engineering Undergraduate Honors Theses

Regression analysis can be an effective way of examining performance in the marathon event. By splitting up the race into segments or in runner terminology “splits” the significance of each segment as it relates to the total finish time can be explored. Because the idea of splits is already ingrained into the minds of runners, it makes intuitive sense to use these as the metrics to define a race. Additionally, marathons generally make participant age and gender date publicly available which can then be used to find trends within specific demographics. This tailors trends to smaller groups of people, making …

Locating Relay Nodes To Maximize Wireless Sensor Network Lifetime: A Numerical Study, Maria Rene Arandia Jimenez

Industrial Engineering Undergraduate Honors Theses

A wireless sensor network (WSN) is a group of sensors deployed over an area, which monitor changes in the environment, collects them as data and forwards it between sensors through wireless links. Data is routed, either in a single-hop or multi-hop manner, with the goal of getting this collected data to the sink nodes, which have higher computational capabilities and connects the network with a user interface. Studies have determined that multi-hop WSNs that integrate relay nodes, which function is to only receive and forward data, can maximize lifetime network. A linear programming model, created by Chang and Tassiulas in …

Curriculum Optimization Via Activity-On-Node Network Modeling, Caroline Rhomberg

Industrial Engineering Undergraduate Honors Theses

University degree plans must be carefully planned so that they allow students the best chance of succeeding. Although for the better, with the advancement of technology and its incorporation into the classroom, it can be argued that the complexity and difficulty of some long-established engineering core classes has changed. With this trend certain combinations of engineering courses have become unfavorable in terms of course withdrawal and fail rates stemming from the interaction of course challenges. A wealth of data has been collected on this topic and will be utilized in this project. As one can imagine, the probability of success …

Optimal Emergency Response Shelter Placement Based On Population Vulnerabilities, Alexander Johnson

Industrial Engineering Undergraduate Honors Theses

Hurricane Florence was a category 4 storm which caused an estimated $24 billion in damages and the loss of 53 lives. During and immediately following Florence, there were 235 shelters operating in and around the North Carolina (NC) area. These were used as temporary housing for storm victims and by emergency responders to distribute relief supplies and provide medical services. Emergency officials consider several factors when deciding where to open shelters, including, for example, proximity of victims and their levels of medical needs. Access disparities, or factors creating barriers that limit entry to shelters, put certain populations and regions at …

Re-Evaluating Coverage Metrics For Wireless Sensor Network Border Security Applications, Kevin Haney

Industrial Engineering Undergraduate Honors Theses

Wireless sensor networks are an emerging technology used to monitor an environment over time. One specific application of the wireless sensor network is the border security application. Researchers have adapted coverage metrics from general wireless sensor network literature to fit the border security application. While some of the adapted metrics count the number of sensors detecting a potential target, others measure the distance between a potential target and its nearest sensor. No existing metric accounts for both of these factors. To take advantage of this gap and to attempt to increase the accuracy to which coverage is measured in this …

Simulating Alternative Tuberculosis Diagnosis Methods In Underdeveloped Countries, Luke Turner

Industrial Engineering Undergraduate Honors Theses

Tuberculosis is the deadliest infectious disease in the world; it is especially rampant in underdeveloped countries because they do not have the infrastructure, technology, or funding to properly combat the infection. However, the development of portable point-of-care diagnosis machines can reverse this epidemic as they far surpass conventional laboratory identification. The question now is where to place these machines, which is a difficult decision with a lack of data. Therefore, a flexible simulation model is created to test the implementation of these machines with different countries and configurations. The simulation tests the baseline model and three proposed implementations of the …

A Quantitative Model For Truck Parking Utilization With Hours Of Service Regulations, Alexis Christine Gaddy

Industrial Engineering Undergraduate Honors Theses

Continual growth in traffic volume on U.S. Highways and insufficient parking for commercial trucking vehicles has led to significant safety concerns for truck drivers. Hours of Service (HOS) regulations dictate driving and rest periods of truck drivers. When a truck driver must stop as designated by the HOS regulations and the nearest parking location is at capacity, the trucker must either continue driving past the HOS limit or park in an undesignated and possibly illegal or unsafe spot such as an off-ramp. The combination of these two variables play an important role in the safety of truck drivers on a …

Using Value-Focused Thinking For Engineered Resilient Systems, Colin A. Small

Industrial Engineering Undergraduate Honors Theses

The DoD needs their systems to be resilient in the face of an ever changing world. To increase resilience in future systems the DoD has created a program called Engineered Resilient Systems. Resilience can be broken down into two parts, mission and platform resilience. Mission resilience is the ability of a system to repel, resist, absorb, and recover from environments and threats that occur on planned missions. Platform resilience is the ability of a system platform to adapt to new missions and new threats.

The University of Arkansas department of Industrial Engineering is working for the ERS program researching resilience. …

Engineered Resilient Systems Model Applied To Network Design, Zephan W. Wade

Industrial Engineering Undergraduate Honors Theses

Engineered Resilient Systems (ERS) is a Department of Defense (DoD) program focusing on the effective and efficient design and development of resilient complex engineered systems throughout their lifecycle. There is growing literature with qualitative definitions of resilience and quantitative models for systems, but these focus typically on systems with one performance measure. In application, many systems have multiple functions and multiple performance measures. This research uses a quantitative resilience framework for ERS that includes system design options, reliability, external threats, vulnerabilities, responses, and consequences assessed on multiple system performance measures. This paper applies the ERS framework to designing resilient networks.

Baseball Portfolio Optimization, Keegan Henderson

Industrial Engineering Undergraduate Honors Theses

Portfolio optimization techniques are methods used to determine the best set of stocks in which to invest. Mean-variance optimization, one method of portfolio optimization, attempts to find the set of portfolios that have the maximum expected return at each level of risk (Jorion, 1992). Another technique, Monte Carlo simulation, uses random number generation to create a probability distribution of potential returns (Kwak & Ingall, 2007). This can be used to determine the risk of potential investments not returning a certain desired amount (Thompson & McLeod, 2009). Though traditionally used in the world of finance, these tools can also be utilized …

Modeling Supply Chain Resiliency, Jeff A. Hazel

Industrial Engineering Undergraduate Honors Theses

Engineered Resilient Systems (ERS) is a Department of Defense (DoD) program focusing on the effective and efficient design and development of complex engineered systems throughout their life cycle. There is a growing literature with qualitative definitions of resilience and quantitative models for systems with one performance measure. This paper uses a quantitative resilience framework (the Framework for ERS) that includes system design options, reliability, threats, vulnerabilities, responses, and consequences assessed in multiple system performance measures. The framework assists in establishing a model for any system to evaluate resiliency. This paper applies this framework using Multiple Objective Decision Analysis (MODA) to …

Modeling Information Reliability And Maintenance: A Systematic Literature Review, Daysi A. Guerra Garcia

Industrial Engineering Undergraduate Honors Theses

Operating a business efficiently depends on effective everyday decision-making. In turn, those decisions are influenced by the quality of data used in the decision-making process, and maintaining good data quality becomes more challenging as a business expands. Protecting the quality of the data and the information it generates is a challenge faced by many companies across all industrial sectors. As companies begin to use data from these large data bases they will need to begin to develop strategies for maintaining and assessing the reliability of the information they generate using this data. A considerable amount of literature exists on data …

Maritime Transportation Research Bank, Valeria A. Remon Perez

Industrial Engineering Undergraduate Honors Theses

The maritime transportation system is an important component of the United States’ (U.S.) economy, from commerce activities to freight movement to disaster’ relief. The annual impact of the maritime transportation system on the U.S. national economy is reported as approximately $649 billion of the total U.S. gross domestic product (U.S. Department of Transportation Maritime Administration, n.d.). This impact is attributed to activities related to the movement of goods and people. Indeed, the maritime transportation system plays an important role in international trade by transporting goods such as coal and farm products, which are common commodities for foreign and domestic commerce …

Cost Distribution Analysis Of Remote Monitoring System Use In The Treatment Of Chronic Diseases, Adeola Yusuf

Industrial Engineering Undergraduate Honors Theses

The cost of the treatment of chronic diseases is very high and this has a huge impact on the health-care system. Several factors contribute to this high cost. Some of these include the direct costs of treatment and the costs of several potential complications that arise as a result of the presence of other diseases. The goal of this study is to evaluate a cost-effective way of managing some of the common chronic diseases by analyzing the potential cost savings of utilizing remote monitoring systems (RMS) as opposed to the use of the traditional bundle (which includes regular visits to …

Decision Support Tool For Operations Management Course And Instructor Scheduling, Morgan Ulesich

Industrial Engineering Undergraduate Honors Theses

The goal of this project is develop a decision support tool that will assist the Operations Management Department at the University of Arkansas with scheduling courses and instructors for the upcoming academic year. The staff of the department dreads this time each year because it takes countless hours to complete the daunting task. Creating an abstract mathematical model will assist the department in scheduling the courses. The model will have the ability to optimize the schedule of the courses and instructors from a large number of variables and constraints that the department requires. An optimization software package can solve the …

Office Hour Scheduling Tool, Tyler Dunlap

Industrial Engineering Undergraduate Honors Theses

When an instructor (with or without student input) specifies her office hours for the semester, the informal process used often results in students experiencing conflicts with other lectures, labs, drills, or office hours. The result of this conflict is the student either scheduling individual meetings with teachers outside of their office hours or students missing the opportunity to get assistance from the instructor all together. Either outcome is undesirable, as it either takes additional faculty time from their other responsibilities or jeopardizes the performance of a student in their classes. One valid approach to solving this problem is through the …

Comparison Of Simulation-Based Schedule Generation Methodologies For Semiconductor Manufacturing, Wenfeng Li

Industrial Engineering Undergraduate Honors Theses

Although a number of approaches have been developed to schedule tasks or jobs in many different manufacturing environments, increasing manufacturing complexity continues to motivate the need for additional scheduling heuristic research and development. This is particularly true for semiconductor manufacturing operations, arguably the most complex manufacturing environment in existence. Simulation-based scheduling has shown recent promise as a means for developing schedules for dynamic, stochastic manufacturing environments. I investigate the potential advantages and drawbacks of using simulation-based scheduling in a complex job shop as motivated by a semiconductor wafer fab.