Operational Research Commons^™

A Dynamic Programming Approach To Determine Optimum Modularity Level In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Modular packaging facilitate customization for accommodating variable product sizes in a product family. When determining package sizes for product variability, packaging engineers does not find difficulty to determine package dimension for less product variety whereas if the product variety is more, then determining the dimension of modular package involves complex decision-making and time-consuming process to find the optimal solution. This in turn directly impacts the overall lead time of the supply chain. Thus, in this paper a dynamic programming is developed to determine the quantity and dimension of modular packages for every demand of assorted products sizes. The program helps …

Ccsfs/Ksc Total Lightning Warning Radii Optimization For Merlin Using Preexisting Lightning Areas, Kimberly G. Holland

Theses and Dissertations

The purpose of this research is to optimize lightning warning radii specifications for the 45th Space Wing (45 SW), thus reducing the number of unnecessary warnings that delay ground processing needed for space launch execution at Kennedy Space Center and Cape Canaveral Space Force Station. This thesis sought to answer two key research questions addressing: 1) What radius reduction effectively balances both safety and operations and do reduction recommendations from previous research align with results from the new detection system? 2) What insights can be gained from comparing measurement results for seasonal lightning events as well as lightning types? This …

Methods For Weighting Decisions To Assist Modelers And Decision Analysts: A Review Of Ratio Assignment And Approximate Techniques, Barry Ezell, Christopher J. Lynch, Patrick T. Hester

VMASC Publications

Computational models and simulations often involve representations of decision-making processes. Numerous methods exist for representing decision-making at varied resolution levels based on the objectives of the simulation and the desired level of fidelity for validation. Decision making relies on the type of decision and the criteria that is appropriate for making the decision; therefore, decision makers can reach unique decisions that meet their own needs given the same information. Accounting for personalized weighting scales can help to reflect a more realistic state for a modeled system. To this end, this article reviews and summarizes eight multi-criteria decision analysis (MCDA) techniques …

Human Factors, Ergonomics And Industry 4.0 In The Oil & Gas Industry: A Bibliometric Analysis, Francesco Longo, Antonio Padovano, Lucia Gazzaneo, Jessica Frangella, Rafael Diaz

VMASC Publications

Over the last few years, the Human Factors and Ergonomics (HF/E) discipline has significantly benefited from new human-centric engineered digital solutions of the 4.0 industrial age. Technologies are creating new socio-technical interactions between human and machine that minimize the risk of design-induced human errors and have largely contributed to remarkable improvements in terms of process safety, productivity, quality, and workers’ well-being. However, despite the Oil&Gas (O&G) sector is one of the most hazardous environments where human error can have severe consequences, Industry 4.0 aspects are still scarcely integrated with HF/E. This paper calls for a holistic understanding of the changing …

Developing An Artificial Intelligence Framework To Assess Shipbuilding And Repair Sub-Tier Supply Chains Risk, Rafael Diaz, Katherine Smith, Beatriz Acero, Francesco Longo, Antonio Padovano

VMASC Publications

The defense shipbuilding and repair industry is a labor-intensive sector that can be characterized by low-product volumes and high investments in which a large number of shared resources, technology, suppliers, and processes asynchronously converge into large construction projects. It is mainly organized by the execution of a complex combination of sequential and overlapping stages. While entities engaged in this large-scale endeavor are often knowledgeable about their first-tier suppliers, they usually do not have insight into the lower tiers suppliers. A sizable part of any supply chain disruption is attributable to instabilities in sub-tier suppliers. This research note conceptually delineates a …

A Transdisciplinary Analysis Of Just Transition Pathways To 100% Renewable Electricity, Adewale Aremu Adesanya

Dissertations, Master's Theses and Master's Reports

The transition to using clean, affordable, and reliable electrical energy is critical for enhancing human opportunities and capabilities. In the United States, many states and localities are engaging in this transition despite the lack of ambitious federal policy support. This research builds on the theoretical framework of the multilevel perspective (MLP) of sociotechnical transitions as well as the concept of energy justice to investigate potential pathways to 100 percent renewable energy (RE) for electricity provision in the U.S. This research seeks to answer the question: what are the technical, policy, and perceptual pathways, barriers, and opportunities for just transition to …

Co2 Reduction Measures In The Aviation Industry: Current Measures And Outlook, Florian Mathys, P. Wild, J. Wang

International Journal of Aviation, Aeronautics, and Aerospace

This article gives a holistic overview of the current CO₂ reduction measures and analyses the effectiveness of measures that are feasible for implementation in the future. To achieve the objectives of the Paris Agreement, the aviation industry needs to implement reduction measures because of its forecasted growth and contribution to global warming. The focus is set on CO₂ reduction measures, categorized in technology, operations, infrastructure/air traffic management (ATM), and market-based measures. The most promising long-term technologies to reduce CO₂ emissions are hydrogen-powered aircrafts and sustainable aviation fuels (SAF). In terms of operations, CO₂ emissions can be …

The Utilization Of Shared Energy Storage In Energy Systems: Design, Modeling And Optimization, Rui Dai

USF Tampa Graduate Theses and Dissertations

Energy storage (ES) plays a significant role in modern smart grids and energy systems. With the advances of ES technologies, efficiently applying ES to energy systems has become the bottleneck for achieving the benefits of ES. The traditional approach of utilizing ES is the so-called distributed framework in which there is a separate ES for each individual user. Due to the inherent limits in the distributed framework such as cost inefficiency and space limitations, many studies have promoted to utilize a shared ES in energy systems to further exploit the potentials of ES. However, current studies always focus on maximizing …

Models For Data Analysis In Accelerated Reliability Growth, Cesar Alexander Ruiz Torres

Graduate Theses and Dissertations

This work develops new methodologies for analyzing accelerated testing data in the context of a reliability growth program for a complex multi-component system. Each component has multiple failure modes and the growth program consists of multiple test-fix stages with corrective actions applied at the end of each stage. The first group of methods considers time-to-failure data and test covariates for predicting the final reliability of the system. The time-to-failure of each failure mode is assumed to follow a Weibull distribution with rate parameter proportional to an acceleration factor. Acceleration factors are specific to each failure mode and test covariates. We …

Virginia Digital Shipbuilding Program (Vdsp): Building An Agile Modern Workforce To Improve Performance In The Shipbuilding And Ship Repair Industry, Joseph Peter Kosteczko, Katherine Smith, Jessica Johnson, Rafael Diaz

VMASC Publications

Industry 4.0 is the latest stage in the Industrial Revolution and is reflected in the digital transformation and use of emergent technologies including the Internet of Things, Big Data, Robotic automation of processes, 3D printing and additive manufacturing, drones and Artificial Intelligence (AI) in the manufacturing industry. The implementation of these technologies in the Shipbuilding and Ship Repair Industry is currently in a nascent stage. Considering this, there is huge potential to increase cost savings, decrease production timelines, and drive down inefficiencies in Lifecyle management of ships. However, the implementation of these Industry 4.0 technologies is hindered by a noticeable …

Waiting-Time Paradox In 1922, Naoki Masuda, Takayuki Hiraoka

Northeast Journal of Complex Systems (NEJCS)

We present an English translation and discussion of an essay that a Japanese physicist, Torahiko Terada, wrote in 1922. In the essay, he described the waiting-time paradox, also called the bus paradox, which is a known mathematical phenomenon in queuing theory, stochastic processes, and modern temporal network analysis. He also observed and analyzed data on Tokyo City trams to verify the relevance of the waiting-time paradox to busy passengers in Tokyo at the time. This essay seems to be one of the earliest documentations of the waiting-time paradox in a sufficiently scientific manner.

Analysis And Forecasting Of The 360th Air Force Recruiting Group Goal Distribution, Tyler Spangler

Theses and Dissertations

This research utilizes monthly data from 2012-2017 to determine economic or demographic factors that significantly contribute to increased goaling and production potential in areas of the 360th Recruiting Groups. Using regression analysis, a model of recruiting goals and production is built to identify squadrons within the 360 RCGs zone that are capable of producing more or fewer recruits and the factors that contribute to this increased or decreased capability. This research identifies that a zones high school graduation rate, the number of recruiters, and the number of JROTC detachments in a zone are positively correlated with recruiting goals and that …

Analysis With Dynamic Bayesian Networks Compared To Simulation, Aaron J. Salazar

Theses and Dissertations

This research compares simulations to Dynamic Bayesian Networks in analyzing situations. The research applies models that have known output mean and variance. Queueing systems have theoretical values of the steady-state mean and variance for the number of entities in the system. Monte Carlo simulation development is broken down into two separate approaches: discrete-event simulation and time-oriented simulation. The discrete-event simulation uses pseudo-random numbers to schedule and trigger future events (i.e. customer arrivals and services) and is based on the generated objects.The time-oriented simulation utilizes fixed-width time intervals and updates the system state according to a stochastic process for the set …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Technology Business Leaders' Strategies To Increase Employees' Engagement, Desmond J. L. Browne

Walden Dissertations and Doctoral Studies

AbstractEmployee disengagement is costly and reduces an organization's ability to meet its full potential to produce business results. Technology business leaders who have engaged employees can positively alter the company's rapid transformation to be more competitive. Grounded by the social exchange theory, the purpose of this qualitative single case study was to explore strategies 6 technology leaders in the Atlanta metropolitan area use to engage employees. Data were collected through semistructured interviews and company documents. Data were analyzed using Yin's 5-step data analysis process. Three themes emerged: communicate with transparency, provide offerings for training and rewards, and identify and implement …

Artificial Bee Colony Algorithm For Solving Fuzzy Multi-Objective Bed Allocation Model, Abdulhakeem Luqman Hasan

Karbala International Journal of Modern Science

With the improvement of the medical services frameworks rivalry, hospitals face more and more challenges. In the interim, allotment of resource has a crucial influence on performing competitive benefits in a hospitals. To choose the suitable beds number is one of the most essential tasks in hospital administration. Anyway, in true condition, bed allotment choice is a multiple-side problem with weakness and haphazardness of the information available. It is so sophisticated. Therefore, the research about bed allotment difficulty is comparatively rare under considering multiple departments, nursing hours, and stochastic information about arrival and service of patients. In this paper, we …

Shared Or Dedicated Infrastructures: On The Impact Of Reprovisioning Ability, Roch A. Guérin, Kartik Hosanagar, Xinxin Li, Soumya Sen

Computer Science and Engineering Faculty Research

New technologies, such as virtualization, are transforming the way in which software and services are deployed and delivered to their users. They are behind the emergence of IT offerings such as cloud computing and converged networks, and manifest themselves through two important trends: (1) lower the cost of sharing a common infrastructure across multiple services with disparate resource requirements, and (2) dynamic provi- sioning of capacity in response to demand. Conventional wisdom is that both of these capabilities are synergistic, with greater provisioning flexibility improving the benefits derived from sharing computing or network resources. Consequently, a service operator should now …

Probabilistic Models For Order-Picking Operations With Multiple In-The-Aisle Pick Positions, Jingming Liu

Graduate Theses and Dissertations

The development of probability density functions (pdfs) for travel time of a narrow aisle lift truck (NALT) and an automated storage and retrieval (AS/R) machine is the focus of the dissertation. The multiple in-the-aisle pick positions (MIAPP) order picking system can be modeled as an M/G/1 queueing problem in which storage and retrieval requests are the customers and the vehicle (NALT or AS/R machine) is the server. Service time is the sum of travel time and the deterministic time to pick up and deposit a pallet (TPD).

Our first contribution is the development of travel time pdfs for retrieval operations …

Fault Adaptive Workload Allocation For Complex Manufacturing Systems, Charlie B. Destefano

Graduate Theses and Dissertations

This research proposes novel fault adaptive workload allocation (FAWA) strategies for the health management of complex manufacturing systems. The primary goal of these strategies is to minimize maintenance costs and maximize production by strategically controlling when and where failures occur through condition-based workload allocation.

For complex systems that are capable of performing tasks a variety of different ways, such as an industrial robot arm that can move between locations using different joint angle configurations and path trajectories, each option, i.e. mission plan, will result in different degradation rates and life-expectancies. Consequently, this can make it difficult to predict when a …

Essays On Time Series And Machine Learning Techniques For Risk Management, Michael Kotarinos

USF Tampa Graduate Theses and Dissertations

The Capital Asset Pricing Model combined with the Sharpe ratio is a standard method for choosing assets for selection in a portfolio. However, this method has many structural issues and was designed for a time when high dimensional computing was in its infancy. An alternative to these methods using a mix of Multi-Level Time Series Clustering, the MACBETH algorithm and traditional time series techniques was constructed that minimized data loss and allow for customized portfolio construction for investors with different risk profiles and specialized investment needs. It was shown that these methods are adaptable to cloud computing environments and allow …

Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method, Bryant Jamison Spencer

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the pharmaceutical manufacturing world, a deadline could be the difference between losing a multimillion-dollar contract or extending it. This, among many other reasons, is why good scheduling methods are vital. This problem report addresses Flexible Flowshop (FF) scheduling using Simulated Annealing (SA) in conjunction with the Steepest Descent heuristic (SD).

FF is a generalized version of the flowshop problem, where each product goes through S number of stages, where each stage has M number of machines. As opposed to a normal flowshop problem, all ‘jobs’ do not have to flow in the same sequence from stage to stage. The …

Agent-Based Modeling And Simulation Approaches In Stem Education Research, Shanna R. Simpson-Singleton, Xiangdong Che

Journal of International Technology and Information Management

The development of best practices that deliver quality STEM education to all students, while minimizing achievement gaps, have been solicited by several national agencies. ABMS is a feasible approach to provide insight into global behavior based upon the interactions amongst agents and environments. In this review, we systematically surveyed several modeling and simulation approaches and discussed their applications to the evaluation of relevant theories in STEM education. It was found that ABMS is optimal to simulate STEM education hypotheses, as ABMS will sensibly present emergent theories and causation in STEM education phenomena if the model is properly validated and calibrated.

Sky Surveys Scheduling Using Reinforcement Learning, Andres Felipe Alba Hernandez

Graduate Research Theses & Dissertations

Modern cosmic sky surveys (e.g., CMB S4, DES, LSST) collect a complex diversity of astronomical objects. Each of class of objects presents different requirements for observation time and sensitivity. For determining the best sequence of exposures for mapping the sky systematically, conventional scheduling methods do not optimize the use of survey time and resources. Dynamic sky survey scheduling is an NP-hard problem that has been therefore treated primarily with heuristic methods. We present an alternative scheduling method based on reinforcement learning (RL) that aims to optimize the use of telescope resources for scheduling sky surveys.

We present an exploration of …

Detecting Special-Cause Variation 'Events' From Process Data Signatures, Timothy M. Young, Olga Khaliukova, Nicolas André, Alexander Petutschnigg, Timothy G. Rials, Chung-Hao Chen

Electrical & Computer Engineering Faculty Publications

The ability to detect the special-cause variation of incoming feedstocks from advanced sensor technology is invaluable to manufacturers. Many on-line sensors produce data signatures that require further off-line statistical processing for interpretation by operational personnel. However, early detection of changes in variation in incoming feedstocks may be imperative to promote early-stage preventive measures. A method is proposed in this applied study for developing control bands to quantify the variation of data signatures in the context of statistical process control (SPC). Control bands based on pointwise prediction intervals constructed from the Bonferroni Inequality and Bayesian smoothing splines are developed. Applications using …

Cost Benefit Analysis Of Led Vs Florescent Lighting, Kurtis Clark, Phillip Humphrey

Student Research

Over the last few years, the state of Oklahoma has been looking at ways to reduce expenses to address concerns about a budget deficit. There have been efforts made to reduce expenses due to the use of energy. It has been said, when the lights are on, work is getting done. Running lights is therefore the cost of doing business. Our research examines the question, “is there a way to provide better lighting while operating at a lower cost.” This research examines the current lighting at Southwestern State University, primarily fluorescent lighting (FL), and a cost benefit analysis of switching …

Evaluating Annual Fixed Wing Maintenance Costs, Kirsten Bunecke, Edward D. White, Jonathan D. Ritschel, Brett A. Bush

Faculty Publications

This article serves two purposes: first, to empirically model the annual percentage increase of operations and support (O&S) costs for fixed wing aircraft; and second, to place into the archival realm another reference for other researchers to consider when investigating other O&S topics. For this study of 21 different airframes grouped together at the Mission- Design Series (MDS), maintenance subcategories 3.1 Consumable Materials and Repair Parts, 3.2 Depot Level Repairables (DLR), and 3.4 Depot Maintenance accounted for an average 91.5% of annual organic maintenance costs. For contractor-maintained MDS, subcategory 3.7, Contractor Logistics Support (CLS) accounted for 96.6% of annual maintenance …

Analysis Of Shanghai Aviation Hub Logistics Competitiveness, Tuo Chen

World Maritime University Dissertations

No abstract provided.

Developing Optimization Techniques For Logistical Tendering Using Reverse Combinatorial Auctions, Jennifer Kiser

Electronic Theses and Dissertations

In business-to-business logistical sourcing events, companies regularly use a bidding process known as tendering in the procurement of transportation services from third-party providers. Usually in the form of an auction involving a single buyer and one or more sellers, the buyer must make decisions regarding with which suppliers to partner and how to distribute the transportation lanes and volume among its suppliers; this is equivalent to solving the optimization problem commonly referred to as the Winner Determination Problem. In order to take into account the complexities inherent to the procurement problem, such as considering a supplier’s network, economies of scope, …

Fundamental Tradeoffs In Estimation Of Finite-State Hidden Markov Models, Justin Le

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hidden Markov models (HMMs) constitute a broad and flexible class of statistical models that are widely used in studying processes that evolve over time and are only observable through the collection of noisy data. Two problems are essential to the use of HMMs: state estimation and parameter estimation. In state estimation, an algorithm estimates the sequence of states of the process that most likely generated a certain sequence of observations in the data. In parameter estimation, an algorithm computes the probability distributions that govern the time-evolution of states and the sampling of data. Although algorithms for the two problems are …

Evaluating Flexibility Metrics On Simple Temporal Networks With Reinforcement Learning, Hamzah I. Khan

HMC Senior Theses

Simple Temporal Networks (STNs) were introduced by Tsamardinos (2002) as a means of describing graphically the temporal constraints for scheduling problems. Since then, many variations on the concept have been used to develop and analyze algorithms for multi-agent robotic scheduling problems. Many of these algorithms for STNs utilize a flexibility metric, which measures the slack remaining in an STN under execution. Various metrics have been proposed by Hunsberger (2002); Wilson et al. (2014); Lloyd et al. (2018). This thesis explores how adequately these metrics convey the desired information by using them to build a reward function in a reinforcement learning …