Industrial Technology Commons^™

Toolpath Planning Methodology For Multi-Gantry Fused Filament Fabrication 3d Printing, Hieu Trung Bui

Graduate Theses and Dissertations

Additive manufacturing (AM) has revolutionized the way industries manufacture and prototype products. Fused filament fabrication (FFF) is one of the most popular processes in AM as it is inexpensive, requires low maintenance, and has high material utilization. However, the biggest drawback that prevents FFF printing from being widely implemented in large-scale production is the cycle time. The most practical approach is to allow multiple collaborating printheads to work simultaneously on different parts of the same object. However, little research has been introduced to support the aforementioned approach. Hence a new toolpath planning methodology is proposed in this paper. The objectives …

Minimodal: Dimensional Domain Of Miniature Shipping Containers For Intermodal Freight Transportation, Lee Stapley

Ursidae: The Undergraduate Research Journal at the University of Northern Colorado

This study explores the feasibility of miniature shipping container usage within existing intermodal transportation (IT) supply chains. Smaller intermodal container shipments may help realign freight shipments with the most efficient transportation mode, rail. These containers embolden the dimensional domain (DD) of shipping. The shipping container dimensional domain (container size variation and modal fluidity) is widespread and results in shipments that are often larger or more infrequent than needed. The DD impacts transport mode, shipping frequency, shipment velocity, intermodal supply chain accessibility, and regional shipping networks. This study suggests that container size impacts the DD and, therefore, mode choice. As miniature …

Application Of Big Data Analytics In Agriculture Supply Chain Management, Sankara Narayanan Mangalam Ananthapadmanabhan

Master's Theses

The increasing trend in frequency of natural disasters in tandem with globalization of business makes the agricultural supply chain significantly vulnerable to disruption. This thesis presents a pragmatic approach for creating a Business Continuity Model that can notify supply chain planners when there is an increase in risk of agriculture supply chain disruption due to natural disasters. The methodology presented in this thesis applied big data analytics and machine learning algorithms along with agriculture product related exponential decay function to create a regionalized composite risk score, that incorporated both direct and indirect risk associated with the Agriculture Fresh Supply Chain. …

Modeling Of Complex Parts For Industrial Waterjet Cleaning, Braden James

Graduate Theses and Dissertations

Industrial high-pressure waterjet cleaning is common to many industries. The modeling in this paper functions inside a collaborative robotic framework for high mix, low volume processes where human robot collaboration is beneficial. Automation of pressure washing is desirable for economic and ergonomic reasons. An automated cleaning system needs path simulation and analysis to give the operator insight into the predicted cleaning performance of the system. In this paper, ablation, the removal of a substrate coating by waterjet, is modeled for robotic cleaning operations. The model is designed to work with complex parts often found in spray cleaning operations, namely parts …

Modeling And Solution Approaches For Non-Traditional Network Flow Problems With Complicating Constraints, Negin Enayaty Ahangar

Graduate Theses and Dissertations

In this dissertation, we model three network-based optimization problems. Chapter 2 addresses the question of what the operation plan should be for interdependent infrastructure systems in resource-constrained environments so that they collectively operate at the highest level. We develop a network-based operation model of these systems that accounts for interdependencies among them. To solve this large-scale model, a solution approach is proposed that relatively quickly generates high-quality solutions to the problem.

Chapter 3 presents a routing model for a single train within a railyard with the objective of minimizing the total length traveled by train. The difference between this problem …

Quantitative Methods For Select Problems In Facility Location And Facility Logistics, Bin Li

Graduate Theses and Dissertations

This dissertation presented three logistics problems. The first problem is a parallel machine scheduling problems that considers multiple unique characteristics including release dates, due dates, limited machine availability and job splitting. The objective of is to minimize the total amount of time required to complete work. A mixed integer programming model is presented and a heuristic is developed for solving the problem. The second problem extends the first parallel scheduling problem to include two additional practical considerations. The first is a setup time that occurs when warehouse staff change from one type of task to another. The second is a …

Assessment And Comparison Of Aviation Manufacturing Industries Throughout Mexico And Brazil, Omar E. Morsi, Kelly A. Whealan-George, Aaron D. Clevenger

International Journal of Aviation, Aeronautics, and Aerospace

This literature review serves to provide insight and understanding in regards to the evolving aviation manufacturing industry throughout the globe and more specifically, Mexico and Brazil. Increased demand for aircraft units both in the commercial and private sectors have led to unprecedented expansions in aircraft manufacturing across the industry. In order to illuminate certain potentials and current growth levels of such industries, this review will delve into an array of information and specifications in regards to economic, political, and cultural influences throughout both Mexican and Brazilian markets respectively. In conclusion, the review will identify the transformation of an aviation manufacturing …

The Rhetoric Of Science Education And Technology, Iwasan D. Kejawa

School of Computing: Faculty Publications

Nearly thousands of science experiments are performed both on humans and animals every year in the United States (Gregory, 1999). Does Science enormously play a role in the well-beings of individual in the society? Research has found that science education is through motivation and satisfying the needs of humans. The scientific world is part of an elongated human development. This can be substantiated with the use and evolution of TECHNOLOGY and SCIENCE (Minton, 2004). Education of the entities that comprise the need to achieve the goal of TECHNOLOGY and SCIENCE which are important issues of today. Research has shown that …

An Engineering Approach To Industrial Research And Development Of Pillows, Wesley Patterson

Mahurin Honors College Capstone Experience/Thesis Projects

Comfort during sleep, though taken for granted, involves a great amount of research and engineering. Few give it a second thought, but nearly one-third of a person’s life is spent with their head on a pillow, thus making them a point for increased quality. Having been approached by a tier-1 bedding manufacturer, a team of both mechanical and electrical engineers was been tasked with the goal of creating a valid research tool that the customer, Tempur-Sealy, will utilize in the company’s research and development of high-end pillows. The team sought to tackle this project utilizing tools and knowledge gained throughout …

Development Of An Associate Degree Level Course On Lean, Jeremy Espinoza

Master of Technology Management Plan II Graduate Projects

Lean training and education has become a focal point in both industry and the realm of academics; however, the need within the industry remains, and oftentimes companies must take on the additional and high expense of training new graduates once they enter the workforce. Often, the classes that students study in the lean methodology, if any are studied at all, are taught within other disciplines, and the instruction is in a general sense as opposed to in depth and hands on. Within the past eight years it has been referenced in different academic articles that students are not coming into …

Solar Turbines Compressor Blade Installation Tools, Ryan Bruce, Carolyn Honeycutt, Stephen Oltrogge, Emmett Ross

Mechanical Engineering

The following report documents a California Polytechnic State University, Mechanical Engineering Senior Project sponsored by the gas turbine manufacturer, Solar Turbines. The senior project team consisted of four senior mechanical engineering students at Cal Poly, all with general concentrations; Ryan Bruce, Carolyn Honeycutt, Steve Oltrogge, and Emmett Ross. Kenneth Thomas sponsored the group and serves as the point of contact between the senior project team and Solar Turbines. He is a member of the Solar Turbines Mechanical Design Engineering Team and a Cal Poly graduate. Christoph Maurer served as the project team’s on-campus advisor.

A gas turbine uses internal combustion …

Modeling Supply Chain Resiliency, Jeff A. Hazel

Industrial Engineering Undergraduate Honors Theses

Engineered Resilient Systems (ERS) is a Department of Defense (DoD) program focusing on the effective and efficient design and development of complex engineered systems throughout their life cycle. There is a growing literature with qualitative definitions of resilience and quantitative models for systems with one performance measure. This paper uses a quantitative resilience framework (the Framework for ERS) that includes system design options, reliability, threats, vulnerabilities, responses, and consequences assessed in multiple system performance measures. The framework assists in establishing a model for any system to evaluate resiliency. This paper applies this framework using Multiple Objective Decision Analysis (MODA) to …

The Reconfigurable Machinery Efficient Workspace Analysis Based On The Twist Angles, Ana M. Djuric, Vukica Jovanovic, Mirjana Filipovic, Ljubinko Kevac

Engineering Technology Faculty Publications

A novel methodology for the calculation, visualisation and analysis of the Reconfigurable Machinery Efficient Workspace (RMEW), based on the twist angles, is presented in this paper. The machinery's kinematic parameters are used for calculating the workspace, while the efficient workspace is associated with the machinery's path and includes the end-effector position and orientation. To analyse and visualise many different machinery efficient workspaces at the same time, the calculation is based on the previously developed and validated complex reconfigurable machinery's kinematic structure named n-DOF Global Kinematic Model (n-GKM). An industrial robot is used as an example to demonstrate …

Spare Parts On Demand Using Additive Manufacturing : A Simulation Model For Cost Evaluation., Stefan Jedeck

Electronic Theses and Dissertations

Little is known about the impact of additive manufacturing in the spare part supply chain. A few studies are available, but they focus on specific parts and their applications only. A general model, which can be adapted to different applications, is nonexistent. This dissertation proposes a decision making framework that enables an interested practitioner/manager to decide whether using additive manufacturing to make spare parts on demand is economical when compared to conventional warehousing strategy. The framework consists of two major components: a general discrete event simulation model and a process of designing a wide range of simulation scenarios. The goal …

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

On The Maintenance Modeling And Optimization Of Repairable Systems: Two Different Scenarios, Suzan Alaswad

Graduate Theses and Dissertations

The use of mathematical modeling for the purpose of analyzing and optimizing the performance of repairable systems is widely studied in the literature. In this dissertation, we study two different scenarios on the maintenance modeling and optimization of repairable systems. First, we study the long-run availability of a traditional repairable system that is subjected to imperfect corrective maintenance. We use Kijima's second virtual age model to describe the imperfect repair process. Because of the complexity of the underlying probability models, we use simulation modeling to estimate availability performance and meta-modeling to convert the reliability and maintainability parameters of the repairable …

Optimization Models And Algorithms For Truckload Relay Network Design, Hector Andres Vergara Arteaga

Graduate Theses and Dissertations

Driver turnover is a significant problem for full truckload (TL) carriers that operate using point-to-point (PtP) dispatching. The low quality of life of drivers due to the long periods of time they spend away from home is usually identified as one of the main reasons for the high turnover. In contrast, driver turnover is not as significant for less-than-truckload (LTL) carriers that use hub-and-spoke transportation networks which allow drivers to return home more frequently. Based on the differences between TL and LTL, the use of a relay network (RN) has been proposed as an alternative dispatching method for TL transportation …

Developing A Philosophical Profile Of The Individual For Complex Problem-Solving Through Agent-Based Modeling, Ipek Bozkurt

Engineering Management & Systems Engineering Theses & Dissertations

Research that focuses on the emotional, mental, behavioral and cognitive capabilities of individuals has been abundant within disciplines such as psychology, sociology, and anthropology, among others. The main argument made in this dissertation, however, is that a different perspective is necessary in order to gain insight about individuals when facing the complex problems that are presented within engineering and management disciplines. This is done by developing the Philosophical Profile of the Individual (PPI) that uses epistemology, ontology and teleology as underlying dimensions of philosophical predispositions. The epistemology dimension considers whether an individual is an Empiricist or a Rationalist, the ontology …

Production Research In China, S. Chaudhry, S. Feng, H. Li, H. Sui, J. L. Zhang, Z Zhang, Li Xu

Information Technology & Decision Sciences Faculty Publications

(First paragraph) China is the world’s largest emerging economy. In recent years, China has moved to an increasingly market-oriented economy that opens to international trade and investment. At the same time, the popularity of China as a manufacturing base, assembling goods for sale worldwide is growing. In addition to global manufacturers who have built their own plants in China, many manufacturing companies are outsourcing production to Chinese subcontractors and branding the products with their own logos. In today’s China, production research is becoming more and more important; advanced production research becomes an important enabler to make its manufacturing industry competitive. …

The Quality Problem Solving Method And Its Effectiveness At Nortech Inc., Jeffrey Henderson

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

An Unsolicited Sociotechnical Intervention In A Public System: A Participatory Action Research Approach, Ely Alfred Dorsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

This research concerns itself with Participatory Action Research in a hostile setting. The thrust is a sociotechnical one, with the intent being to enhance the capacity of the Wallop Public School System, Wallop, USA, to address its problem of racial disparate treatment of Black children. The potential for Organizational Learning among the school system's senior staff is studied. Some new theory about such hostile interventions is proposed. Also discussed are questions about reliability and construct validity within the context of the multiple role playing that an interventionist has in this setting. The role of the press is reflected in the …