Industrial Engineering Commons^™

Bootstrap Statistics, Greg Hutto

Operations Management Presentations

Bootstrap Statistics is an intuitive approach to learning statistics because of its simplicity, freedom from assumptions and wide applicability. This webinar will refresh your knowledge of statistics and give you intuitive tools to apply concepts. We will deduce robust methods to build point estimates, interval estimates and assert differences or similarities. If time permits, we’ll even evaluate statistical power! And we’ll do it all with only one major assumption and no curtain of math or normal theory clouding our procedures. The webinar will be accompanied by three papers, tool references, slides and a sample data set with solutions.

Application Of Theory Of Constraints (Toc) In Managing Project Information Constraints, Ferdinand Z. Prantl

EMSE Doctoral Projects

The scope of this doctoral project is the non-traditional application of Drum-Buffer-Rope (DBR) from the area of Theory of Constraints (ToC) in mitigating disruption in distribution facilities during phased upgrades caused by information constraint. The relevance of this project is that industrial equipment upgrades pose a significant risk of disrupting the operation of automated distribution facilities. It is partly due to a very high expected availability rate, as well as tight coupling with other upstream and downstream elements of the larger supply chain network. As a consequence of disruption in this scenario, losses incurred not only within the facility being …

Applications Of Image Processing Techniques And Spatial Data Analytics For Pressure Mapping Analysis, Joan Yamil Martinez

Dissertations

The technological advancements in sensors, monitoring systems, and tracking devices are changing how we study our environment; big data sets are becoming more and more prevalent due to the increase of information gathered with ease. One system benefiting from these technological improvements is pressure mapping technology, an easy-to-use and cost-effective solution for assessing contact pressure distributions.

Pressure mapping systems generally produce data sets of very large volume, especially when used for continuous tracking and monitoring, and are widely used for research in fields of ergonomics, sports, industries, and health disciplines. Pressure mapping systems are particularly important in the study of …

Effects Of Transparency And Haze On Trust And Performance During A Full Motion Video Analysis Task, Sarah C. Leibner

Psychology Theses & Dissertations

Automation is pervasive across all task domains, but its adoption poses unique challenges within the intelligence, surveillance, and reconnaissance (ISR) domain. When users are unable to establish optimal levels of trust in the automation, task accuracy, speed, and automation usage suffer (Chung & Wark, 2016). Degraded visual environments (DVEs) are a particular problem in ISR; however, their specific effects on trust and task performance are still open to investigation (Narayanaswami, Gandhe, & Mehra, 2010). Research suggests that transparency of automation is necessary for users to accurately calibrate trust levels (Lyons et al., 2017). Chen et al. (2014) proposed three levels …

Barriers And Facilitators Influencing Compliance With Enhanced Recovery After Surgery Protocol: A Qualitative Study, Paige Boudreaux

LSU Master's Theses

Standardization in many industries has proven to lead to improved productivity and efficiency, however, standard practice in healthcare has proven difficult due to patient and physician variation. Evidence-based practices provide an opportunity to create more standardization. Enhanced Recovery After Surgery (ERAS) programs are attempting to standardize the surgical pathways of patients by implementing standard evidence-based steps, beginning in the surgeons office and continuing through a patients discharge (Ljungqvist, Scott, & Fearon, 2017). Implementing ERAS to standardize the surgical care of patients has shown to improve patient outcomes, reduce length of stay and reduce readmissions, however, there is a lack of …

Biomechanical Behavior Of A Variable Angle Locked Tibiotalocalcaneal Construct, Farah Hamandi, Gerard Simon, Richard T. Laughlin, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

This paper examines the mechanics of the tibiotalocalcaneal construct made with a PHILOS plating system. A failed device consisting of the LCP plate and cortical, locking, and cannulated screws was used to perform the analysis. Visual, microstructure, and fractographic examinations were carried out to characterize the fracture surface topology. These examinations revealed the presence of surface scratching, inclusions, discoloration, corrosion pits, beach marks, and cleavage and striations on the fracture surface. Further examination of the material crystallography and texture revealed an interaction of S, Ni, and Mo-based inclusions that may have raised pitting susceptibility of the device made with Stainless …

A Methodology For Incorporating The Effect Of Grain Size On The Energy Efficiency Coefficient For Fatigue Crack Initiation Estimation In Polycrystalline Metal, Chun-Yu Ou, Rohit Voothaluru, C. Richard Liu

Purdue University Libraries Open Access Publishing Fund

Estimating fatigue crack initiation of applied loading is challenging due to the large number of individual entities within a microstructure that could affect the accumulation of dislocations. In order to improve the prediction accuracy of fatigue crack initiation models, it is essential to accurately compute the energy dissipated into the microstructure per fatigue loading cycle. The extent of the energy dissipated within the microstructure as a fraction of the overall energy imparted by loading has previously been defined as the ‘energy efficiency coefficient’. This work studied the energy efficiency coefficient as a factor in the measurement of accumulated plastic strain …

Utilization And Standardization Of Beverage Based Containers, Michael T. Bobke, Jack C. Maughan, Kenia Vargas

Industrial and Manufacturing Engineering

The purpose of this document is to formally describe and explain all of the decisions associated with the data collection and analysis for this Cal Poly Senior Project. Throughout the project, we will utilize and hone the skills that each team member has developed during our time in Cal Poly's Engineering program. In addition, this document will briefly describe some of Blue Diamond’s history as one of the biggest almond companies in the world. The statement of work will introduce and describe the current status of the beverage base container process and international beverage container design. Next it will discuss …

Rebar Impalement Safety, Spencer C. Nefores, Steven M. Hoover

Industrial and Manufacturing Engineering

This project is sponsored by Webcor with the purpose of finding a better solution to rebar impalement safety. The current rebar impalement safety caps being used by Webcor were found to frequently fall off after being installed. This results in workers being exposed to the hazard for longer than desired. The research that has been done by the team showed that rebar impalement is a serious hazard and results in injury or death every year. Site visits and interviews were performed to aid in understanding the problem and designing solutions. The customer needs, current state of the problem, existing solutions, …

Parklets San Luis, Owen Kenny, Preston Jag Stebel, Leonidas Goodman, Lukas Braun

Industrial and Manufacturing Engineering

Downtown San Luis Obispo has been a popular destination for tourists, students, families, and roadtrippers. However, according to Ryan Betz, Interim Assistant to the City Manager, foot traffic and retail business revenue has been decreasing. Downtown SLO does not have enough free public spaces. Recent projects such as sidewalk bump outs and lighted crosswalks have aimed at making SLO more pedestrian accessible, but they have not actually made downtown more pleasurable. These projects have not seemed to drive any more business or traffic downtown. There are a myriad of ways to rectify this; studies show that having a free place …

Some Recent Advances In Design Of Bayesian Binomial Reliability Demonstration Tests, Suiyao Chen

USF Tampa Graduate Theses and Dissertations

Reliability demonstration test (RDT) is one of important reliability assurance activities to demonstrate products' quality over time. Binomial RDT (BRDT) is one class of RDTs with appealing features, such as less failure monitoring efforts and fewer reliability modeling assumptions. Integrating with Bayesian method further allows prior knowledge incorporation for potential test sample size reduction. However, conventional designs often assume the binary failure states (i.e., success and failure) and consider a single objective of minimizing the testing cost with limited planning horizon. In this dissertation, a series of RDT designs are proposed and studied by advancing the conventional Bayesian BRDT designs …

Development And Experimental Investigation Of Modular Crates For Industrial Packaging Applications, Marshal Louie, Kumar B

Journal of Applied Packaging Research

For the increased product varieties, engineered plywood crate production technique could not facilitate box size optimization. This paper investigates the implementation of modularity function onto the plywood crate to resize the pack cube volume on customer requirement and to reduce space wastage inside the box. This is achieved by using a new joint technique called “Flat- Post Tongue Joint”. The full-sized experimental work is carried out comprising Flexural test analysis on Flat-Post Tongue joint, Tensile test analysis on tongue joint and Box Compression Test analysis on the two developed models of modular crates namely Modifiable Reinforced Plywood Crate (MRPC) and …

On The Convergence Of Transportation And Power Systems In Smart And Connected Communities, Kevin A. Melendez

USF Tampa Graduate Theses and Dissertations

Even though the total number of light-duty vehicles in the U.S. is expected to increase by 2030, total fuel consumption is expected to significantly decrease in the same timeframe. This contradictory behavior is in part explained by the increasing utilization of electricity as the primary source of energy in the transportation sector. Due to its potential to decrease dependency on fossil fuels, electric transportation has become a promising approach to alleviate the increasing environmental crisis. Passenger car markets are expected to experience a flood of new Electric vehicles (EVs) in the next few years. EVs are considered effective resources to …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Research On Integration And Optimization Of Cosco Industrial Chain, Xiang Yan

International Transport and Logistics

No abstract provided.

Customer Choice Modeling For Retail Category Assortment Planning And Product-Line Extension, Elham Nosratmirshekarlou

Wayne State University Dissertations

Growing competitiveness and increasing availability of data is generating great interest in data-driven analytics across industries. One of the areas that has gained a lot of attention is Customer choice modeling, which aims to explain the choices individual customers make in choosing from a set of products based on their preferences. While effective customer choice modeling is essential to a wide variety of application domains, including retail, it is challenging in practice due to limitations around the quality of the data available for modeling and potentially complex choice behaviors. This dissertation presents a hybrid modeling approach that relies on both …

Evaluation Of Fitts’ Throughput As A Possible Performance Measure For Manual Assembly Tasks, Pradyumna Bettagere Jagadish

Graduate Theses, Dissertations, and Problem Reports (ETD)

Assembly lines are the backbone of the manufacturing sector. Workers at the assembly lines are expected to perform fast pace hand-arm exertions with precision and accuracy. To protect the workers from injuries, OSHA mandates the use of personal protective equipment (PPE) including gloves. Certain assembly operations require the use of special gloves. Some of these gloves can inhibit hand performance, further increasing the task difficulty. The Index of Difficulty (ID) is a metric measured in ‘bits’ quantifies task difficulty through the quotient of target width and target motion, i.e., distance travelled. The time required to complete the target motion is …

Assess The Performance Against Ets And Pm1 And Evaluate The Users’ Experiences Of Comfort Of Nasal Filters, Ibrahim Almuhaidib

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many cities around the world experience severe air pollution. According to the World Health Organization (WHO), 7 million people die annually from exposure to small airborne Particulate Matter (PM) that is found in atmospheric pollution. Particulate matter in atmospheric pollution is one of six classifications of common air pollutants and is typically referred to as PM₁ and PM_2.5. Particulates designated as PM₁ and PM_2.5 refer to particles having aerodynamic diameters of 1 or 2.5 micrometer (µm), respectively. These size ranges of particles are the most commonly found in air pollution. It is hard to differentiate …

Application Of Reliability Centered Maintenance In Railway Tracks, Sarita Rattanakunuprakarn

Electronic Theses and Dissertations, 2020-2023

Rail transport has played a significant role for a long time in the U.S. history. As other alternative transport modes have been developed, rail transport has increasingly faced more challenges to stay competitive. While heavy use of the rail, shortened service life and the need to meet consumer expectations have placed challenges, maintenance has become an integral part of the railway industry to assure efficacy and reliability of rail transportation. For this reason, there is a constant need to improve maintenance for a number of purposes, such as safety, quality, capacity, reliability, availability, punctuality, etc. In addition, optimizing maintenance strategy …

Mobile Health Technology To Enhance Healthcare Service Delivery In Developing Nations (Saudi Arabia), Nawaf Khan

Electronic Theses and Dissertations, 2020-2023

Saudi Arabia is among the countries that have very high prevalence rates of diabetes and hypertension, with prevalence rates of almost 18% and 25%, respectively. The majority of patients with diabetes and hypertension fail to manage their diseases and to show up for their follow up appointments. Mhealth technology is among the interventions that have been recently adopted to overcome these issues and improve the quality of healthcare services. This study aims to evaluate the effectiveness of a mobile phone application named diabetes and hypertension application (DHA Tracking) to promote adherence for patients with diabetes and hypertension in Mecca, Saudi …

Leveraging Augmented Reality For Real-Time Operational Performance Management, Joshua Nelson

Electronic Theses and Dissertations, 2020-2023

Augmented Reality (AR) projects a virtual overlay onto real space so that the user can see a superimposed image over the real-world background. Although AR has advanced recently and a breadth of applications can be found in practice, they are focused on simple tasks with few examples of more complex work tasks. One area that could benefit from advancing AR technology is operations management, specifically operational performance measurement (OPM); however, a brief review of the literature reveals that this potential application area has not yet been explored. Therefore, the purpose of this work is to investigate the application of AR …

The Improvement Of Shewhart-Stable Time Series Processes By Applying Jensen-Shannon Complexity Measures To Characterize Emergent Structure, Blaine Lorimer

Electronic Theses and Dissertations, 2020-2023

Despite the nearly universal imperative to continuously improve processes, Shewhart-stable time series are often ignored for improvement because of various generalized assumptions and "rules", many of which are actually very context dependent. The process control literature presents widely divergent views, including the extreme position that stable processes are completely random and therefore any further compensation ("tampering") can only increase process variability. The traditional reductionist approach to process improvement characterizes underlying factors using statistical variance measures, which has been very effective for unstable processes. However, this approach, especially when it involves Shewhart control charts, is generally much less effective for directing …

Identifying Diurnal Variability Of Brain Connectivity Patterns Using Graph Theory, Farzad Vasheghani Farahani

Electronic Theses and Dissertations, 2020-2023

Circadian rhythms are 24-hour fluctuations determining periodicity in a wide range of physiological processes, including neural activity and hormone secretion, which controls sleeping and feeding habits. Despite significant diurnal variation in human brain function, neuroscientists have rarely considered the effects of time-of-day on their studies. Moreover, there are interpersonal discrepancies in sleep-wake patterns, diurnal preferences, and daytime alertness (known as chronotypes), which can cause different diurnal profiles in human cognition and brain performance. The study of circadian typology differences has increased in recent years, however, examining the effects of both time-of-day and people's chronotype requires further elucidation. In the present …

Creation And Analysis Of An Enhanced Rascal-Lvc Framework Capable Of Simulating Ionizing Radiation Damage To Emergency Responders During A Nuclear Power Plant Disaster: A Case Study In Unmanned Aerial Vehicle Electronic System Survivability, Buder Shageer

Electronic Theses and Dissertations, 2020-2023

This study developed and analyzed the use of a live virtual constructive (LVC) framework capable of simulating ionizing radiation damage to Unmanned Aerial Vehicles (UAV) during a nuclear power plant disaster. UAV response promises greater safety to humans over helicopters as well as provides longer survivability in the presence of irradiated environments. However, electronics in unmanned systems are subject to radiation damage and over time eventual failure. A LVC simulation framework may offer an independent and low-cost assessment of equipment life expectancy. Knowing life expectancy of equipment for operational scenarios is critical for emergency management planners. This research creates an …

The Gamification Framework Of Military Flight Simulator For Effective Learning And Training Environment, Daeho Noh

Electronic Theses and Dissertations, 2020-2023

The purpose of this thesis is to develop a framework for the gamification of flight simulators to provide an active learning and training environment for military jet pilots. Currently, with the development of visual displays and computer processing capabilities, the modern simulator has made great progress in visual and auditory terms that is incomparable to the past. In addition, functions that were previously implemented through supercomputers and complex hardware devices are now available through desktop computers at an affordable cost. Despite these advances, the simulators so far are thought to have been negligent in building an active learning and training …

Human Performance In Virtual Reality Environments And Its Exploration With Engineering Analytics, Fahad Alasim

Electronic Theses and Dissertations, 2020-2023

Engineering Analytics (EA) is a technique used to derive meaningful insight from gathered data. It is an approach that has arisen, and it includes the process of analyzing data using analytics tools from fields such as Big Data, Machine Learning (ML), traditional operations research, statistics, and numerical methods. Industrial Engineering is an engineering field concerned with how to design better, improve, and install integrated systems, uses EA to understand and continually improve, innovate, and build new processes. Therefore, EA and Virtual Reality (VR) technology can be used in combination with Electroencephalography (EEG), a physiological measurement, to investigate human areas. The …

The Impact Of Work Environment On Successful Implementation Of Lean Six Sigma In Emergency Department, Elaf Makkawi

Electronic Theses and Dissertations, 2020-2023

Continuous improvement (CI) is an initiative to improve the performance of processes in alignment with the customer needs and organizational strategy. Lean Six Sigma (LSS) is one of the most successful CI techniques in redesigning and improving significant processes to improve quality and eliminate waste. The healthcare sector has benefited from applying LSS due to its complicated work practices that face many challenges including increased expenditures and difficulties related to individual or community access to appropriate care. In particular, Emergency Departments (ED) have an important unit within healthcare organizations due to their essential role in providing urgent medical care services …

Assessing The Potential Of Implementing Blockchain In Supply Chains Using Agent-Based Simulation And Deep Learning, Mohammad Obeidat

Electronic Theses and Dissertations, 2020-2023

In this decade, with the rise of data science accompanying the growth of e-commerce, many technologies have been developed. An example of these technologies is Blockchain, which has appeared to overcome security problems potentially. This research assesses Blockchain's implementation in supply chains through a methodology that uses deep learning and agent-based simulation. A case study was utilized to observe and validate research developments. The unique method predicts intrusions by using deep learning, and agent-based modeling reproduces artificial but convincing agents (e.g., customers, companies, hackers, and cyber pirates) in a computer-generated market. Trust and other relationships are systematically captured to represent …

An Approach To Modeling Simulated Military Human-Agent Teaming, Maartje Hidalgo

Electronic Theses and Dissertations, 2020-2023

With the rise of human-agent teaming (HAT), a new cycle of scientific discovery commenced. Through scientific discovery, a number of theories of constructs in HAT were developed, however, an overarching model is lacking that elucidates the relative importance of these constructs in relation to human performance. The main objective of this research was to develop a model of simulated military HAT and to validate it against selected empirical data. Experimental data borrowed from four simulated military HAT studies were used to test the proposed Core model. The Core model was assumed to be directly affecting task performance and consisted of …

Investigation In Engineering Leadership Using System Engineering And Virtual Reality, Charles Davis

Electronic Theses and Dissertations, 2020-2023

System Engineering can help derive requirements and specifications to build virtual environments which are good to test behaviors and attitudes. Virtual simulations can have a strong impact because role-playing facilitates active learning, permits the acceptance of new concepts, and generates increased interest, enthusiasm, and motivation. Research over the last 50 years has shown that reasoning with and about context is an essential aspect of human cognition, permeating language, memory, and reasoning capabilities. This integral process is developed over a lifetime through experiential learning. In this research, we utilize systems engineering to capture guidelines from psychologist and concepts of technological leadership. …