Industrial Engineering Commons^™

Application Of Kansei Engineering To Tactile Sense In The Thai Food Wrapping Materials, Chaiwat Kittidecha, Ashuboda Chandrajith Marasinghe, Yamada Koichi

Journal of Applied Packaging Research

The paper investigates tactile attributes of food wrapping materials in Thailand based on Kansei Engineering and finds that 1) there are two major Kansei dimensions in tactile sense of food wrapping materials, 2) the emotion of "like" constitutes one of the two dimensions both with "smooth" and "natural", and 3) the most favorable wrapping material for Thai is "plastic foam" among nine different wrapping materials; plastic bag, aluminum foil, plastic film, paper, banana leaf, wax paper, plastic net, plastic air bubble and plastic foam. The study was conducted through a questionnaire that asked 6 pairs of emotions about samples; dislike …

Mining Dynamic Recurrences In Nonlinear And Nonstationary Systems For Feature Extraction, Process Monitoring And Fault Diagnosis, Yun Chen

USF Tampa Graduate Theses and Dissertations

Real-time sensing brings the proliferation of big data that contains rich information of complex systems. It is well known that real-world systems show high levels of nonlinear and nonstationary behaviors in the presence of extraneous noise. This brings significant challenges for human experts to visually inspect the integrity and performance of complex systems from the collected data. My research goal is to develop innovative methodologies for modeling and optimizing complex systems, and create enabling technologies for real-world applications. Specifically, my research focuses on Mining Dynamic Recurrences in Nonlinear and Nonstationary Systems for Feature Extraction, Process Monitoring and Fault Diagnosis. …

Densification Of W-Ni-Fe Powders Using Laser Sintering, Xuan Wang, Matthew Wraith, Stephen Burke, Howard Rathbun, Kyle Devlugt

Industrial and Manufacturing Engineering

In this paper, Laser Sintering (LS) of 90%W–7%Ni–3%Fe (wt.%) powders have been investigated, with the goal to understand the influence of final density by laser power, scanning speed, laser trace width, and the number of scanning passes. The results suggest that the laser power and scanning speed are the most important factors influencing density; the influence of trace width and number of scanning passes are not significant. With the increase of laser power and decrease of scanning speed, higher density can be achieved. The microstructure analysis indicated that the porosity changed from open porosity to closed porosity with higher laser …

The Casualty Transportation Of Ebola Outbreak In Liberia: A Simulation Study, Hyejin Cho

Open Access Theses

In this paper, we have solved the unique problem of casualty transportation problem under Ebola by developing dynamic policies for vehicle routing in order to provide practical decision support. The objective of the proposed model is to minimize the total transmission risk. We describe the problem with real- constraints and parameters based on the empirical data of the 2014 Ebola outbreak in Liberia. The casualty transportation problem is a variant of Dynamic Pick-up and Delivery Problems (DPDP), in which a vehicle is dispatched to demand location in real time and it then transports the demands to the aimed area (destination). …

Developing Agent-Based Simulation Models Of Task Performance Of Cognitively Diverse Teams, Megan Marie Nyre

Open Access Theses

Team-oriented work dominates industry, government, and academic areas with the goal of solving increasingly complex problems. However, the scope and external validity of traditional human factors research is inherently limited by the time and resources required to conduct laboratory studies. The model described in this thesis integrates simulation with human factors by providing an operationalized model that incorporates cognitive diversity and domain expertise. Convergence and functionality of the model have been established through a series of analyses, and a clear path for future research has been identified. By integrating simulation methods into human factors subject areas, researchers may be able …

Interactive Spatiotemporal Analysis Of Oil Spills Using Comap In North Dakota, Yong Shin Park, Hamad Al-Qublan, Eunsu Lee, Gokhan Egilmez

Mechanical and Industrial Engineering Faculty Publications

The aim of the study is to analyze the oil spill pattern from various types of incidents and contaminants to determine the extent that incident data can be used as a baseline to prevent hazardous material releases and improve response activities at a state level. This study addresses the importance of collecting and sharing oil spill incidents as well as analytics using the data. Temporal, spatial and spatiotemporal analysis techniques are employed for the oil-spill related environmental incidents observed in the state of North Dakota, United States of America, from 2000 to 2014, as a result of the oil boom. …

Additive Manufacturing Process Parameter Effects On The Mechanical Properties Of Fused Filament Fabrication Nylon, Eric S. Holm

Theses and Dissertations

The purpose of this research was to determine how varying Fused Filament Fabrication (FFF) process parameters affect the mechanical properties of PA6 nylon dog-bone specimens produced on the Mark One 3D Printer. A design of experiment (DOE) was conducted using the factors of layer height and raster angle orientation. The mechanical properties measured in the experiment were tensile modulus, yield stress, percent strain at yield, ultimate tensile strength and percent strain at break. An analysis of variance (ANOVA) was performed to identify which factors were statistically significant in influencing mechanical properties. Results of the ANOVA showed that layer height was …

Health Monitoring Device, Prim Boonwisut, Askar Zhapbassov, Tahmeed Rafee

Engagement & Service-Learning Summit

No abstract provided.

Human-System Integration, Jiahui Cai, Xianpeng Wang, Xinyue Cao, Siyu Liu, Wanyu Wu, Xiao Shi, Yutong Xu

Engagement & Service-Learning Summit

No abstract provided.

A Smart System: Driver Safety For The Car Savvy And Not Through Mobile Application, Veronica Cruz, Jonathan La Plain

Engagement & Service-Learning Summit

No abstract provided.

Application Of Smart Factory Design In Nuclear Energy Industry With Focus On Safety, Olivia Crasta, Cem Yilmaz

Engagement & Service-Learning Summit

No abstract provided.

Skycsr: Optimal Communication Methods For Coordinating Ground Support In A Private And General Aviation Setting, Jessica Burke

Industrial and Manufacturing Engineering

Delays due to miscommunication of between the pilot and ground service providers are increasing. The objective of this project is to develop a new method of communication between pilots, line service technicians and customer service agents. This will be achieved first through an investigation into current methods and state of the industry, followed by a survey conducted with a group of pilots and flight schools. This culminates in a web application that will take the deficiencies identified in the survey, to make sure ground service or fuel orders are explicitly clear and minimize the probability of a mis-fueling, overlooked fueling, …

Carbon Emission Awareness And Information Platform, Jose Ignacio Cordero, Paul Romero

Industrial and Manufacturing Engineering

Climate change due to global warming has become a worldwide concern.

Nowadays, people are starting to wake up and realize that changes need to be

made in their lifestyles in order to preserve this earth and provide a better planet

for future generations. Finding a concrete solution to global warming and climate

change has proven to be a very challenging task. Governments have tried

implementing solutions and as a result, corporations have been forced to absorb

or transfer the cost of unsuccessful environmental regulations. Meanwhile,

individuals remain frustrated, wishing they could find a way to help.

The motivation behind this …

Multi-Level Route-Optimization Computer Application, Ryan Sutardji, Frank Nguyen

Industrial and Manufacturing Engineering

This report provides a detailed analysis on how to optimize driving routes by creating a computer application. There are many different route-optimization issues that logistical companies consistently face, as well as many different solutions and algorithms. With technology on the rise, pick-up, delivery, and transportation services are become a huge part of our everyday lives. When optimizing routes, reducing transportation costs by minimizing travel distance is always ideal, but other factors must be considered such as arriving at a location before or after a certain time. Our objective is to optimize driving routes based on travel distance and priorities. We …

Multi-Axis Machining Project Development, Ryan Patrick Blodgett, Andre Peter Rivera

Industrial and Manufacturing Engineering

Multi-axis milling is a manufacturing material removal process in which computer numerically controlled (CNC) tools cut away excess material through movement in four or more axes. Compared to traditional three-axis machining, multi-axis machining greatly increases the capability and accuracy of the CNC machining processes by reducing the amount of operations required to completely machine a part. Currently, the Industrial and Manufacturing Engineering Department at Cal Poly lacks an advanced CNC class that incorporates fourth and fifth axis CNC machining in the curriculum. This report describes the process behind creating a project for such a class. The class will demonstrate the …

A Comparison Of Instructional Strategies For Teaching Entry-Level Welding At The High School Level, Jared Paul Massic

Theses and Dissertations

The traditional method of teaching welding has remained unchanged for decades. In this model, an instructor gives demonstrations to a class of students and then helps them individually as they practice the techniques of welding. This traditional instructional method has been effective but is time consuming. Due to a significant increase in the demand for skilled welders within the United States, efforts have been made to develop more efficient methods of providing welding instruction. Various electronic welding guidance systems and virtual welding systems have recently been developed. In this study, the researcher addressed two questions 1) Does the use of …

Enhancing A Flight Dispatcher Display For Safer Flight Operations, Jeongjoon Boo

Open Access Theses

This study assesses capability of flight dispatchers to adopt enhancements on their display that enables detection of flights in abnormal activities and investigation of the causes. Three approaches were used. First, the expected function for enhancements was designed by collecting information from different places about what technologies are available for consideration. Second, hierarchical task analysis was conducted based on data collected by interviewing a former flight dispatcher in order to assess operational capability to handle the enhancement. Third, based on the results of first two approaches, a display prototype that includes the enhancement was developed and evaluated for usability and …

A Simulation Model For Decision Support In Business Continuity Planning, Marissa Anne Mosunich

Master's Theses

Enterprises with a global supply network are at risk of lost revenue as a result of disruptive disasters at supplier locations. Various strategies exist for addressing this risk, and a variety of types of research has been done regarding the identification, assessment and response to the risk of disruption in a supply chain network.

This thesis establishes a decision model to support Business Continuity Planning at the first-tier supplier level. The decision model incorporates discrete-event simulation of supply chain networks (through Simio software), Monte Carlo simulation, and risk index optimization. After modeling disruption vulnerability in a supply chain network, costs …

Quantitative Analysis Of Retrieved Glenoid Liners, Katelyn Childs, Lynn Crosby, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Revision of orthopedic surgeries is often expensive and involves higher risk from complications. Since most total joint replacement devices use a polyethylene bearing, which serves as a weak link, the assessment of damage to the liner due to in vivo exposure is very important. The failures often are due to excessive polyethylene wear. The glenoid liners are complex and hemispherical in shape and present challenges while assessing the damage. Therefore, the study on the analysis of glenoid liners retrieved from revision surgery may lend insight into common wear patterns and improve future product designs. The purpose of this pilot study …

Long-Term Velaglucerase Alfa Treatment In Children With Gaucher Disease Type 1 Naïve To Enzyme Replacement Therapy Or Previously Treated With Imiglucerase, Laurie Smith, William Rhead, Joel Charrow, Suma P. Shankar, Ashish Bavdekar, Nicola Longo, Rebecca Mardach, Paul Harmatz, Thomas N. Hangartner, Hak-Myung Lee, Eric Crombez, Gregory M. Pastores

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background

Gaucher Disease type 1 (GD1) often manifests in childhood. Early treatment with enzyme replacement therapy (ERT) may prevent disease complications. We report the assessment of velaglucerase alfa ERT in pediatric GD1 patients who participated in a long-term extension study (HGT-GCB-044, ClinicalTrials.gov Identifier NCT00635427).

Methods

Safety and efficacy were evaluated in pediatric patients receiving velaglucerase alfa 30–60 U/kg by intravenous infusion every other week. In addition to key hematological and visceral efficacy assessments, exploratory assessments conducted specifically in pediatric patients included evaluation of height, bone age, bone marrow burden, and Tanner stage of puberty.

Results

The study included 24 …

Life Cycle Assessment And Optimization-Based Decision Analysis Of Construction Waste Recycling For A Leed-Certified University Building, Murat Kucukvar, Gokhan Egilmez, Omer Tatari

Mechanical and Industrial Engineering Faculty Publications

The current waste management literature lacks a comprehensive LCA of the recycling of construction materials that considers both process and supply chain-related impacts as a whole. Furthermore, an optimization-based decision support framework has not been also addressed in any work, which provides a quantifiable understanding about the potential savings and implications associated with recycling of construction materials from a life cycle perspective. The aim of this research is to present a multi-criteria optimization model, which is developed to propose economically-sound and environmentally-benign construction waste management strategies for a LEED-certified university building. First, an economic input-output-based hybrid life cycle assessment model …

Knowledge Reuse Through Electronic Knowledge Repositories: An Empirical Study And Ontological Improvement Effort For The Manufacturing Industry, Peter Panha Chhim

Wayne State University Dissertations

Knowledge management adoption is growing, and will continue to grow in no small part because of its recent inclusion into the ISO 9001 quality standard. As organizations look towards ways in which to manage their knowledge, the codification of explicit knowledge through Knowledge Management Systems (KMS) and Electronic Knowledge Repositories (EKRs) will undoubtedly gain more interest.

An EKR is a form of KMS that emphasizes the codification and storage of organizational expertise for the purposes of Knowledge Reuse (KRU). Unfortunately, the factors surrounding KRU are not well understood. While previous studies have viewed EKR usage from a narrow perspective, a …

Group Scheduling In A Cellular Manufacturing Shop To Minimise Total Tardiness And Nt: A Comparative Genetic Algorithm And Mathematical Modelling Approach, Gokhan Egilmez, Emre M. Mese, Bulent Erenay, Gürsel A. Süer

Mechanical and Industrial Engineering Faculty Publications

In this paper, family and job scheduling in a cellular manufacturing shop is addressed where jobs have individual due dates. The objectives are to minimise total tardiness and the number of tardy jobs. Family splitting among cells is allowed but job splitting is not. Two optimisation methods are employed in order to solve this problem, namely mathematical modelling (MM) and genetic algorithm (GA). The results showed that GA found the optimal solution for most of the problems with high frequency. Furthermore, the proposed GA is efficient compared to the MM especially for larger problems in terms of execution times. Other …

A Simulation-Based Evaluation Of Efficiency Strategies For A Primary Care Clinic With Unscheduled Visits, Afrifah Bobbie

Electronic Theses and Dissertations

In the health care industry, there are strategies to remove inefficiencies from the health delivery process called efficiency strategies. This dissertation proposed a simulation model to evaluate the impact of the efficiency strategies on a primary care clinic with unscheduled "walk-in" patient visits. The simulation model captures the complex characteristics of the Orlando Veteran's Affairs Medical Center (VAMC) primary care clinic. This clinic system includes different types of patients, patient paths, and multiple resources that serve them. Added to the problem complexity is the presence of patient no-shows characteristics and unscheduled patient arrivals, a problem which has been until recently, …

A Systems Approach To Assessing, Interpreting And Applying Human Error Mishap Data To Mitigate Risk Of Future Incidents In A Space Exploration Ground Processing Operations Environment, Tiffaney Alexander

Electronic Theses and Dissertations

Research results have shown that more than half of aviation, aerospace and aeronautics mishaps/incidents are attributed to human error. Although many existing incident report systems have been beneficial for identifying engineering failures, most of them are not designed around a theoretical framework of human error, thus failing to address core issues and causes of the mishaps. Therefore, it is imperative to develop a human error assessment framework to identify these causes. This research focused on identifying causes of human error and leading contributors to historical Launch Vehicle Ground Processing Operations mishaps based on past mishaps, near mishaps, and close calls. …

Computational Modeling Approaches For Task Analysis In Robotic-Assisted Surgery, Mahtab Jahanbani Fard

Wayne State University Dissertations

Surgery is continuously subject to technological innovations including the introduction of robotic surgical devices. The ultimate goal is to program the surgical robot to perform certain difficult or complex surgical tasks in an autonomous manner. The feasibility of current robotic surgery systems to record quantitative motion and video data motivates developing descriptive mathematical models to recognize, classify and analyze surgical tasks. Recent advances in machine learning research for uncovering concealed patterns in huge data sets, like kinematic and video data, offer a possibility to better understand surgical procedures from a system point of view. This dissertation focuses on bridging the …

Technology Decisions In New Product Development, Amir Sanayei

Wayne State University Dissertations

Selecting the right technology is one of the most important and challenging decisions in new product development (NPD) process that can greatly affect all downstream design activities which have a great impact on product success in the market place. Although new technologies may bring more competitive advantage by offering higher performance to price, they also make the NPD process more risky and challenging. We model the technology selection problem of a firm that is defining its new product in the presence of the technology uncertainty. At each review stage, firm has the options: select and commit to any technology alternatives …

Parametric Investigations Into Internal Surface Modification Of Brass Tubes With Alternating Magnetic Field, Harish Kumar, Sehijpal Singh, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications

The final finish operations have great significance in an overall manufacturing cycle of a product. The surface finishing and modification of surfaces have been the vital requirements of most of the products. The processes like shot peening, shot blasting, abrasive finishing and super finishing are being largely employed for such requirements. While final finishing of flat and outside surfaces are relatively easy and well established, the internal surfaces such as those of pipes is not so simple. In this paper, the application of low frequency alternative magnetic field has been explored for imparting surface modification including surface on the internal …

An Integrated Design For Six Sigma-Based Framework To Align Strategy, New Process Development, And Customer Requirements In The Airlines Industry, Mohammed Alghamdi

Electronic Theses and Dissertations

When organizations create new strategy maps, key new processes are often identified. This is important for organizations to stay competitive in the global marketplace. This document describes the development, implementation, and validation of a framework that properly aligns and links an organization's strategy and new process development. The proposed framework integrates the Balanced Scorecard management system (BSC) and the Design for Six Sigma (DFSS) methodology, leveraging their strengths, overcoming weaknesses, and identifying lessons learned to help bridge the gap between strategy development and execution. The critical-to-quality conceptual model is used as an integrative component for the framework. Literature search has …

An Experimental Investigation Of The State Of Creativity, Critical Thinking And Creativity Training In Undergraduate Engineering Students, Eric Sola

Electronic Theses and Dissertations

This research explores creativity and critical thinking skills in undergraduate engineering students. The study undertook two experiments in order to gather a better understanding of several factors regarding the interactions between students' creative abilities and the effects of the undergraduate engineering curriculum. Experiment 1 focused on the differences in creative and critical thinking skills in freshman versus senior undergraduate engineering students. Experiment 2 centered on the variation in the effects of long-term versus short-term creativity training on senior engineering students. Creative skill was measured using the Test for Creative Thinking – Drawing Production (TCT-DP) developed by Urban and Jellen (2010). …