Industrial Engineering Commons^™

A Model To Integrate Sustainability Into The User-Centered Design Process, Adrienne Shevonne Brown

Electronic Theses and Dissertations

With concerns for the environment becoming more prevalent in business and the government, it is increasingly important to re-evaluate and update processes to include sustainability considerations early in the design process. In response to this charge, this research effort was designed to integrate sustainability factors into the usercentered design process. The results of this research highlight the benefits of sustainability requirement planning, as well as those derived from integrating sustainability into the current user-centered design model

A Framework For Quantifying Sustainability Of Lean Implementation In Healthcare Organizations, Haitham Ahmed Bahaitham

Electronic Theses and Dissertations

Due to the remarkable positive effect of lean adoption in various firms in the manufacturing sector, it has been adopted by several organizations within the healthcare industry. Although the rate of adopting lean by hospitals in the developed countries is slower than it should be, it proved to be effective in helping healthcare organizations maintain or even improve their quality of care while containing their related costs. However, such adoption did not take place until the beginning of the new millennium. And with such adoption, it has been accompanied with major challenges related to proper lean implementation, sustainability of achieved …

Dynamic Routing On Stochastic Time-Dependent Networks Using Real-Time Information, Ali R. Guner

Wayne State University Dissertations

In just-in-time (JIT) manufacturing environments, on-time delivery is one of the key performance measures for dispatching and routing of freight vehicles. Both the travel time delay and its variability impact the efficiency of JIT logistics operations, that are becoming more and more common in many industries, and in particular, the automotive industry. In this dissertation, we first propose a framework for dynamic routing of a single vehicle on a stochastic time dependent transportation network using real-time information from Intelligent Transportation Systems (ITS). Then, we consider milk-run deliveries with several pickup and delivery destinations subject to time windows under same network …

Modeling And Surveillance Of Pandemic Influenza Outbreaks, Diana Prieto

USF Tampa Graduate Theses and Dissertations

Pandemic outbreaks are unpredictable as to their virus strain, transmissibility, and impact on our quality of life. Hence, the decision support models for mitigation of pandemic outbreaks must be user-friendly and operational, and also incorporate valid estimates of disease transmissibility and severity. This dissertation research is aimed at 1) reviewing the existing pandemic simulation models to identify their implementation gaps with regard to usability and operability, and suggesting research remedies, 2) increasing operability of simulation models by calibrating them via an epidemiological model that estimates infection probabilities using viral shedding profiles of concurrent pandemic and seasonal influenza, and 3) developing …

Cap-And-Trade Modeling And Analysis For Electric Power Generation Systems, Patricio Rocha

USF Tampa Graduate Theses and Dissertations

Cap-and-trade is the most discussed CO₂ emissions control scheme in the U.S. It is a market-based mechanism that has been used previously to successfully reduce the levels of SO₂ and NO_x emitted by power generators. Since electricity generators are responsible for about 40% of the CO₂ emissions in the U.S., the implementation of CO₂ cap-and-trade will have a significant impact on electric power generation systems. In particular, cap-and-trade will influence the investment decisions made by power generators. These decisions in turn, will affect electricity prices and demand. If the allowances (or emission permits) created by …

Enterprise Transformation Through A Zachman-Bayesian Framework To Improve Efficiency & Productivity, Ramakanth Gona

Open Access Theses & Dissertations

Although organizations are aware of the benefits of enterprise architectures models, organizations have difficulties determining deficiencies in their business architecture. Organizational assessment tools often do not achieve expectations as sold to management. Performance measures often fail to properly represent necessary holistic measurements. Methods for capturing deficiencies in current business models and deterring improvements to optimize business processes are rare. This thesis develops a new experimental architecture modeling approach for enterprise transformations. The approach is efficient in capturing deficiencies and finding correlations which can become targeted goals for improvements. The Zachman enterprise architecture framework provides a holistic view of organizational models …

The Effects Of Anti-Price Gouging Legislation On Supply Chain Dynamics, Jason Edward Maynard

Master's Theses

The purpose of this thesis is to model the effects of anti-price gouging (APG) legislation on the costs to businesses during the recovery period of a disaster. A system dynamics model of a business’s replenishment procedures is used to simulate the effects of APG legislation on business performance. Economists have published expansive research on the effects of price ceilings on supply and demand, but there is little research evidence on the operational consequences of price ceiling legislation on business costs. APG legislation increases consumer’s forward buying and shortage gaming after a disaster by removing price incentives to be frugal. Forward …

Decision Aid Models For Resource Sharing Strategies During Global Influenza Pandemics, Alfredo Santana Reynoso

USF Tampa Graduate Theses and Dissertations

Pandemic influenza outbreaks have historically entailed significant societal and economic disruptions. Today, our quality of life is threatened by our inadequate preparedness for the imminent pandemic. The key challenges we are facing stem from a significant uncertainty in virus epidemiology, limited response resources, inadequate international collaboration, and the lack of appropriate science-based decision support tools. The existing literature falls short of comprehensive models for global pandemic spread and mitigation which incorporate the heterogeneity of the world regions and realistic travel networks. In addition, there exist virtually no studies which quantify the impact of resource sharing strategies among multiple countries. This …

An Integrated Decision Support Framework For Remanufacturing In The Automotive Industry, Akhilesh Kumar

Wayne State University Dissertations

In today's global economy, firms are seeking any and every opportunity to differentiate from competitors by reducing supply chain costs and adding value to end customers. One increasingly popular option, under growing consumer awareness and increasing legislation, is to reintegrate returned products into the supply chain to achieve economic benefits as well as improve sustainability. An important class of such "reverse" goods flows has to do with remanufacturing (reman), which refers to activities that restore returned products ("cores") or their major modules to operational condition for using in place of new product or distributing through other channels (e.g., spare parts). …

Perspectives On Quality Coordination And Assurance In Global Supply Chains, Ling Li, John N. Warfield

Information Technology & Decision Sciences Faculty Publications

The 2007 recall of Berko Electric Toe-Space Heaters made in the US, the recall of backpack blowers made in Japan, the recalls of toys and pet food produced in China have exposed the potential of global supply chain disruptions. This product recall storm leads to the issue of quality assurance in global supply chain management. Product recalls indicate that manufacturing companies are particularly vulnerable to ensure quality when they source via a global supply chain with poor visibility. Obviously, a supply chain cannot afford this kind of sourcing and supply structure that threatens the supply-chain integrity. This special issue on …

The Development Of A Human Centered Methodology For The Identification Of Communication Needs And The Assessment Of Hand-Held Communication Devices Used To Support Communication Flow In High Consequence Emergency Management, Mohammad Imraan Jeelani

Electronic Theses and Dissertations

Communication has been identified as a critical component in the outcome of emergency response. Post-mortems of “what went wrong” in disaster responses often point toward breakdown in communication between first responders, those directing rescue efforts, and the general population as one of the primary impediments to rendering timely aid and communicating adequate safety and weather information. Due to the high resilience, relatively low costs, and advanced features of modern hand-held communication devices, these devices are in a position to drastically improve communication flow during emergency management situations. Due to the lack of official implementation of these devices and the lack …

Modeling And Characterization Of Acute Stress Under Dynamic Task Conditions, Angel M. Millan

Electronic Theses and Dissertations

Stress can be defined as the mental, physical, and emotional response of humans to stressors encountered in their personal or professional environment. Stressors are introduced in various activities, especially those found in dynamic task conditions when multiple task requirements must be performed. Stress and stressors have been described as activators and inhibitors of human performance. The ability to manage high levels of acute stress is an important determinant of successful performance in any occupation. In situations where performance is critical, personnel must be prepared to operate successfully under hostile or extreme stress conditions; therefore training programs and engineered systems must …

Benefits Of Cpfr And Vmi Collaboration Strategies In A Variable Demand Environment, Dattaraj Kamalapurkar

Dissertations

In recent years, practitioners and academic researchers have emphasized that organizations need to collaborate with suppliers and customers to improve their competitive advantage. The availability of cost efficient information technologies like EDI, XML, etc. have made it possible to develop and implement many forms of collaboration strategies. Among them, Vendor Managed Inventory (VMI) and Collaborative Planning, Forecasting and Replenishment (CPFR) are most popular, which are considered for this study. While many studies have identified the benefits of demand information sharing in supply chains; however the benefits gained by implementing collaboration strategies like VMI and CPFR in a variable demand environment …

Virtual Design Verification And Process Improvement Of Composite Sheet Material Products Using Intelligent Finite Element Analysis (Ifea), Sathyanarayanan Narasimhan

Dissertations

Engineering design decisions influence more than 70% of product costs. Various computational analysis tools such as Finite Element Analysis (FEA) are typically utilized, to achieve an effective design cycle. Literature review in design process indicates a striking reality that about 75% of design errors can be eliminated through analysis and about 20% of analyses are misrepresented, leading to inadequate or faulty design. Also, analyses in general, generate more information about the problem than is often looked into, leading to a vast potential to study the knowledge creation.

This research bridges these gaps in design process through efficient use of computer-based …

Estimating Industrial Building Energy Savings Using Inverse Simulation, Franc Server, J. Kelly Kissock, Dan Brown, Steve Mulqueen

Mechanical and Aerospace Engineering Faculty Publications

Estimating energy savings from retrofitting existing building systems is traditionally a time intensive process, accomplished by developing a detailed building simulation model, running the model with actual weather data, calibrating the model to actual energy use data, modifying the model to include the proposed changes, then running the base and proposed models with typical weather data to estimate typical energy savings. This paper describes a less time-intensive method of estimating energy savings in industrial buildings using actual monthly energy consumption and weather data. The method begins by developing a multivariate three-parameter changepoint regression model of facility energy use. Next, the …

Apparent Total Evaporative Resistance Values From Human Trials Over A Range Of Metabolic And Heat Stress Levels, Matthew David Dooris

USF Tampa Graduate Theses and Dissertations

Failure to maintain thermal equilibrium can cause uncontrollable increases in body core temperature beyond critical upper limits. In selecting clothing, consideration must be given to the heat transfer properties of clothing that may restrict the cooling capacity of the human body under heat stress conditions, most importantly, apparent total evaporative resistance (R_e,T,_a). This study calculated and compared R_e,T,_a for five clothing ensembles under varying heat stress conditions, including three relative humidity (RH) levels and three stages of heat stress to determine if R_e,T,_a values varied or remained the same with …

Indentifying And Understanding User Preferences In Generic Planning Tools, Grisel Ventura

Open Access Theses & Dissertations

Planning is an important cognitive work activity. To support this complex task, the development of planning tools is important to support people during decision-making and problem-solving tasks. Nowadays, a large number of manual and electronic tools support this complex activity; manual and electronic planning tools aid people in creating strategies for effective work performance. However, there is limited information on the design of generic planning tools people use for their activities, and why people choose to use the planning tool they do. Some examples of generic tools for planning are calendars, checklists, agendas, etc.

To answer this question, this research …

Identification Of Patient Recovery Patterns After Cardiovascular Surgery Based On Laboratory Tests Results, Alcides Ricardo Santander Mercado

USF Tampa Graduate Theses and Dissertations

In this dissertation is proposed a methodology to identify patient's recovery patterns after cardiovascular surgery based on laboratory tests results. The main purpose is to enhance the understanding of the manifestations of postsurgical complications in patients who underwent cardiovascular surgery. The analysis of patients' recovery process is based on the relationship between plasma calcium, ionized calcium and platelet count over time.

Laboratory results from the James A. Haley Veterans' Hospital databases, related to patients admitted to the Surgical Intensive Care Unit (SICU) after cardiac surgery (coronary artery bypass, aortic value replacement and mitral valve replacement), are used. These databases contain …

Decision Support Models For Design Of Fortified Distribution Networks, Qingwei Li

USF Tampa Graduate Theses and Dissertations

Lean distribution networks have been facing an increased exposure to the risk of unpredicted disruptions causing significant economic forfeitures. At the same time, the existing literature contains very few studies that examine the impact of fortification of facilities for improving network reliability. This dissertation presents three related classes of models that support the design of reliable distribution networks. The models extend the uncapacitated P-median and fixed-charge location models by considering heterogeneous facility failure probabilities, supplier backups, and facility fortification within a finite budget. The first class of models considers binary fortification via linear fortification functions. The second class of models …

The Impact Of Pharmacy Work Design On Pharmacist Productivity, Nicholas Allen Coblio

USF Tampa Graduate Theses and Dissertations

Healthcare costs in the United States continue to grow at an alarming rate. Concerning the cost of medications, there are a number of factors that drive these costs. While personnel costs are not the largest of these, they do contribute a significant portion. The cost of the cognitive component of order processing by pharmacists can range from three dollars to over six dollars per prescription depending on the production throughput of the pharmacist.

Studies at the organization which was the focus of the research, as well as reports in the literature, indicated that work disruption and other environmental factors could …

Analytical Methods To Support Risk Identification And Analysis In Healthcare Systems, Laila Nadime Cure Vellojin

USF Tampa Graduate Theses and Dissertations

Healthcare systems require continuous monitoring of risk to prevent adverse events. Risk analysis is a time consuming activity that depends on the background of analysts and available data. Patient safety data is often incomplete and biased. This research proposes systematic approaches to monitor risk in healthcare using available patient safety data. The methodologies combine traditional healthcare risk analysis methods with safety theory concepts, in an innovative manner, to allocate available evidence to potential risk sources throughout the system. We propose the use of data mining to analyze near-miss reports and guide the identification of risk sources. In addition, we propose …

The Impact Of Supply Chain And Network Structure On The Environmental Performance Of Sustainability-Focused Companies, Ozan Ozcan

USF Tampa Graduate Theses and Dissertations

The goal of this dissertation was to contribute to our understanding of the relationship between supply chain structure and the pursuit of a sustainability-driven corporate strategy. The literature indicates that in order to pursue a sustainability-focused strategy, an increased level of integration across the supply chain is required. However, there are also industry-level dynamics that impact observed levels of vertical integration. That is, some industries are naturally more integrated than others based on the maturity level of the industry. Thus, some firms may experience opposing forces regarding their sourcing strategies once they choose to pursue a sustainability-focused strategy.

To explore …

Implementation Of Flexible Manufacturing System In A Fertilizer Plant To Reduce Inventory And Waste : A Case Study., Chien Wei Ee

Student Works (2010-2019)

This case study aims to investigate the results of implementing flexible manufacturing system in a fertilizer plant, for reducing waste. The main problems identified during the study are loss of material, low productivity, low machines utilization, low overall equipment effectiveness and high quantity of reworked material. To achieve the goals of the study, engineering tools such as Flexible Manufacturing System (FMS) and Total Productive Maintenance (TPM) are used. PDSA cycle is followed in developing the framework of the study. A team is formed, which consists of 6 executives to execute the flexible manufacturing systems and engineering tools. An effective flexible …