Industrial Engineering Commons^™

Flow Pattern Control In Microchannels By Means Of Wall Surface Patterning, K. Fushinobu, M. M. Nakata, M. Tokushige, K. Okazaki

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Convective Flow Boiling Of Refrigerant-Oil Mixtures On An Enhanced Tube Bundle, N.H. Kim, T.R. Shin, E.R. Lee

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Effect Of Corrugation Angle On The Hydrodynamic Behaviour Of Power-Law Fluids During A Flow In Plate Heat Exchangers, C.S. Fernandes, R.P. Dias, J.M. Nóbrega, J.M. Maia

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Effectiveness Due To Manufacturing And Fouling, W. Shang, R. W. Besant

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Experimental And 3d Numerical Study Of Air Side Heat Transfer And Pressure Drop Of Slotted Fin Surface, W.Q. Tao, Z.G. Qu, Y.L. He

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

The Manufacture Of Micro Cross-Flow Heat Exchangers By Selective Laser Melting, S. Tsopanos, C. J. Sutcliffe, I. Owen

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Study On Compact Heat Exchanger For Vehicular Gas Turbine Engine, S. Akama, Y. Himeji, A. Minami, T. Yoshikawa

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Keynote Lecture: Numerical Simulation And Experimental Study Of Flow And Heat Transfer Characteristics Of Shell Side Fluid In Shell-And-Tube Heat Exchangers, Y.L. He, W.Q. Tao, B. Deng, X. Li, Y. Wu

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Preface, Ramesh K. Shah, Masaru Ishizuka, Thomas M. Rudy, Vishwas V. Wadekar

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

A Rotating Shallow Cone Evaporator, R.S. Jebson

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Thermal Conductivity Of A Nano-Structured Material, K. Miyazaki, H. Tsukamoto, R.G. Yang, G. Chen

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Table Of Contents, The Editors

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Experimental Study On Port To Channel Flow Distribution Of Plate Heat Exchangers, F. A. Tereda, N. Srihari, B. Sunden, S. K. Das

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

A Study Of Channel Optimization In Cooling Spreader On A Smaller And Transient Heat Source, K. Yazawa, M. Ishizuka

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Design Considerations For Compact Ceramic Offset Strip-Fin, High Temperature Heat Exchangers, S. Subramanian, V. Ponyavin, C.R. Delosier, Y. Chen, A.E. Hechanova

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Keynote Lecture: High Temperature Heat Exchangers, B. Sundén

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Heat Exchangers In Solid Oxide Fuel Cell Systems - Their Roles And Features, H. Yoshida, H. Iwai

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Air-Side Thermal Hydraulic Performance Of An Offeser-Strip Fin Array At Reynalds Numbers Up To 120,000, G.J. Michna, A.M. Jacobi, R.L. Burton

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Natural Convection In Heat Exchangers – A New Incentive For More Compact Heat Exchangers, T. Aicher, H. Martin

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Effects Of Heat Exchanger Flow Channel Variations On Pressure Drop And Modified Dlc-Coatings For The Mitigation Of Scaling On Heat Transfer Surfaces, W. Augustin, J. Zhang, I. Bialuch, S. Scholl

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Entrance And Wall Conduction Effects In Parallel Flow Heat Exchangers, A. Fakheri, H. Al-Bakhit

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Enhancement Of Boiling On A Small Diameter Tube Due To Bubbles From Below, E. Adom, P. A. Kew, K. Cornwell

Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology

No abstract provided.

Optimization Of The Fuzzy Logic Controller For An Autonomous Uav, Jon C. Ervin, Sema E. Alptekin, Dianne J. Deturris

Industrial and Manufacturing Engineering

In this paper, we describe the optimization of membership functions in an application employing a hierarchical Fuzzy Logic Controller. The size of the rule base is made manageable by using a unique formulation, known as Combs method, to help control the problem of ‘exponential rule expansion’. The optimization is performed using a steady state genetic algorithm with a dynamic fitness function. The controller being developed is designed to fly a small, autonomous parafoil, suitable for short-range reconnaissance and land survey applications. The optimization process is performed in the Matlab/Simulink software environment and incorporates fuzzy logic modules developed in the Matlab …

On The Design For Flexibility Of Manufacturing Systems : A Stochiastic Approach, Nathapol Areeratchakul

Dissertations

Flexibility has emerged as one of the most strategic imperatives for company viability in today's fast paced economy. This realization has stimulated extensive research efforts in this area most of which have focused mainly on defining flexibility and its attributes, the need for flexibility and how to measure it. Nevertheless, despite the considerable amount of publications regarding flexibility and its related subjects, insufficient attention has been given to the optimality of the design for flexibility and the inherent needs to meet uncertainty. Bridging this gap is the intent of this work.

In this dissertation, developed analytical models are for the …

A Multi-Factor Model For Evaluating Manufacturing Defect Opportunities In Six Sigma Analysis, Karthikeyan Sundaram

Theses

Six Sigma Quality Analysis provides a structured method for manufacturing quality problems and defect opportunities to be defined, measured, analyzed, improved, and controlled. The technique is now being widely used in both the manufacturing and service industries to evaluate the classical "defects per million" metric. An underlying assumption of classical Six Sigma Analysis is that all defects contribute equally to the derivation of the defect rate. In the thesis, it is proposed that this assumption skews and often distorts the derived defect rate. Using classical Six Sigma the user is able to list a large number of often border-line defect …

Knowledge Representation, Organization, And Formalization For Simulation Modeling Of Discrete Manufacturing System, Jung Hung Ma

All-Inclusive List of Electronic Theses and Dissertations

Simulation is an useful tool that helps managers making decision by designing models for real systems. It helps companies to study behaviors of real systems hy analyzing computer models and improve the systems based on the experiments' results. However, cross-domain knowledge requirement and lack of tools facilitate modeling are the main reasons that make industries hesitate to use simulation to assist making decision. This research is an attempt to develop robust knowledge representations for discrete manufacturing system and conceptual simulation model. A modeling methodology was proposed to utilize these knowledge representations (KRs) for developing conceptual simulation models from application domain …

Stability Analysis For Forging Of Porous Bodies, Xuan Wang, Eugene Olevsky, Alain Molinari

Industrial and Manufacturing Engineering

The continuum theory of sintering is used for the analysis of the stability of forging of a cylindrical powder specimen. The constitutive properties of the powder material are assumed to follow a power-law creep relationship. Temperature-coupled linear non-uniform stability analyses are carried out. Stability maps are obtained for forging of copper powder components.

Cement Oonded Wood Wool Board As A Building Material For Low Cost Housing, A Mrema

Tanzania Journal of Engineering and Technology (TJET)

This paper gives results of a preliminary study on the properties of cement bonded wood-wool boards manufactured as composites by using wood-wool (excelsior) from podocarpus spp wood species and ordinary Portland cement. Two main parameters were varied during the investigation and these were the width of the wood-wool and the cement to wood-wool ratio. Results show that the optimum mix proportion is three parts of cement to two parts of wood-wool by weight and that a smaller excelsior width gives higher board strengths. The results from tests on flexural strength, compressive strength and tensile strength far exceeded the requirements of …

Degradation Of Waterfront Reinforced Concrete Structures At The Port Of Dar Es Salaam, I Sanga

Tanzania Journal of Engineering and Technology (TJET)

The paper summarises the results of an investigation done on piers at the Dar es Salaam Port. The problem facing these structures and marine facilities is their exposure to aggressive environmental phenomena. The paper presents an investigation of the strength and corrosion of concrete seaport piers so as to determine degradation of the reinforced concrete waterfront structures in the port of Dar es Salaam. For instance the structures at a dhow quay terminal had been in use for about 100 years. The facility was in bad condition as the concrete had been badly damaged due to corrosion. Some of the …

Study Of The Impact Of Quality Costs On Profitability: The Case Of Small And Medium Industries In Tanazania, B Kundi

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.