Industrial Engineering Commons^™

Efficiently Estimating Survival Signature And Two-Terminal Reliability Of Heterogeneous Networks Through Multi-Objective Optimization, Daniel Bruno Lopes Da Silva

Graduate Theses and Dissertations

The two-terminal reliability problem is a classical reliability problem with applications in wired and wireless communication networks, electronic circuit design, computer networks, and electrical power distribution, among other systems. However, the two-terminal reliability problem is among the hardest combinatorial problems and is intractable for large, complex networks. Several exact methods to solve the two-terminal reliability problem have been proposed since the 1960s, but they have exponential time complexity in general. Hence, practical studies involving large network-type systems resort to approximation methods to estimate the system's reliability. One attractive approach for quantifying the reliability of complex systems is to use signatures, …

Optimization Of Vaccine Supply Chains In Low- And Middle-Income Countries Utilizing Drones, Maximilian Kolter

Graduate Theses and Dissertations

Despite tremendous efforts from governments and humanitarian organizations, millions of children in low- and low-middle-income countries (LICs and LMICs) are still excluded from the benefits of immunization. The vaccine distribution in LICs and LMICs is challenging for several reasons, such as limited cold chain capacities, vaccine wastage, uncertain demand, and lack of access to immunization services. A promising avenue to address these issues is the utilization of drones for vaccine delivery. Drones can fly at high speed on direct paths and could enable on-demand deliveries to mitigate limited storage capacities. Further, their independence of road networks could allow them reaching …

Quantitative Set-Based Design For Complex System Development, Nicholas J. Shallcross

Graduate Theses and Dissertations

This dissertation comprises a body of research facilitating decision-making and complex system development with quantitative set-based design (SBD). SBD is concurrent product development methodology, which develops and analyzes many design alternatives for longer time periods enabling design maturation and uncertainty reduction. SBD improves design space exploration, facilitating the identification of resilient and affordable systems. The literature contains numerous qualitative descriptions and quantitative methodologies describing limited aspects of the SBD process. However, there exist no methodologies enabling the quantitative management of SBD programs throughout the entire product development cycle. This research addresses this knowledge gap by developing the process framework and …

Models For Data Analysis In Accelerated Reliability Growth, Cesar Alexander Ruiz Torres

Graduate Theses and Dissertations

This work develops new methodologies for analyzing accelerated testing data in the context of a reliability growth program for a complex multi-component system. Each component has multiple failure modes and the growth program consists of multiple test-fix stages with corrective actions applied at the end of each stage. The first group of methods considers time-to-failure data and test covariates for predicting the final reliability of the system. The time-to-failure of each failure mode is assumed to follow a Weibull distribution with rate parameter proportional to an acceleration factor. Acceleration factors are specific to each failure mode and test covariates. We …

Study On New Sampling Plans And Optimal Integration With Proactive Maintenance In Production Systems, Sinan Obaidat

Graduate Theses and Dissertations

Sampling plans are statistical process control (SPC) tools used mainly in production processes. They are employed to control processes by monitoring the quality of produced products and alerting for necessary adjustments or maintenance. Sampling is used when an undesirable change (shift) in a process is unobservable and needs time to discover. Basically, the shift occurs when an assignable cause affects the process. Wrong setups, defective raw materials, degraded components are examples of assignable causes. The assignable cause causes a variable (or attribute) quality characteristic to shift from the desired state to an undesired state.

The main concern of sampling is …

Simulation Modeling Of Cross-Dock And Distribution Center Based Supply Chains, Ghewa Al Chall

Graduate Theses and Dissertations

Companies are implementing new strategies to meet the customer requirements in terms of quality, timing, and cost. One of these strategies is cross-docking, which can be defined as the process of consolidating the products coming from different suppliers, but having the same destination, with minimal handling and almost no storage between loading and unloading of the goods. The purpose of this research is to investigate the benefits of having a cross-docking facility in a supply chain. In this research, we focus on developing discrete event simulation models using the opensource Java Simulation Library (JSL). Also, we work on augmenting an …

Locating Emergency Shelters While Incorporating Spatial Factors, Justin Taylor

Graduate Theses and Dissertations

In the immediate response phase of a natural disaster, local governments and nonprofit agencies often establish shelters for affected populations. Decisions regarding at which locations to open shelters are made ad hoc based on available building inventory, and may result in high travel impedance to reach shelters and congestion. This thesis presents a shelter location optimization model based on the two-step floating catchment area (2SFCA) method. The 2SFCA method creates a shelter accessibility score for each areal unit (e.g., census block group) which represents the ability for persons in the unit to access shelter capacity with low travel impedance, relative …

Extracting Patterns In Medical Claims Data For Predicting Opioid Overdose, Ryan Sanders

Graduate Theses and Dissertations

The goal of this project is to develop an efficient methodology for extracting features from time-dependent variables in transaction data. Transaction data is collected at varying time intervals making feature extraction more difficult. Unsupervised representational learning techniques are investigated, and the results compared with those from other feature engineering techniques. A successful methodology provides features that improve the accuracy of any machine learning technique. This methodology is then applied to insurance claims data in order to find features to predict whether a patient is at risk of overdosing on opioids. This data covers prescription, inpatient, and outpatient transactions. Features created …

Optimizing Block-Stacking Operations With Relocation, Hueon Lee

Graduate Theses and Dissertations

The focus of the dissertation is developing the optimization problem of finding the minimum-cost operational plan of block stacking with relocation as well as devising a solution procedure to solve practical-sized instances of the problem. Assuming changeable row depth instead of permanent row depth, this research is distinguished from conventional block stacking studies.

The first contribution of the dissertation is the development of the optimization problem under the assumption of deterministic demand. The problem is modeled using integer programming as a variation of the unsplittable multi-commodity flow problem. To find a good feasible solution of practical-sized instances in reasonable time, …

Contributions Of Role-Playing Games: Advantages Of Incorporating Social Media In Disaster Response, Erin Mullin

Graduate Theses and Dissertations

After a disaster, emergency managers need to know who needs help, what type of help they need, and how soon they need it. Traditionally, they have relied on 911 calls and ground assessments to collect this information. Because the needs of a population are not able to be identified in a timely manner by ground assessments and because individuals are often unable to get through to 911, many civilians in distress turn to social media outlets as a last-ditch effort to obtain the services they need. Due to the uncertainty concerning the accuracy of social media posts, responding to disaster …

Probabilistic Models For Order-Picking Operations With Multiple In-The-Aisle Pick Positions, Jingming Liu

Graduate Theses and Dissertations

The development of probability density functions (pdfs) for travel time of a narrow aisle lift truck (NALT) and an automated storage and retrieval (AS/R) machine is the focus of the dissertation. The multiple in-the-aisle pick positions (MIAPP) order picking system can be modeled as an M/G/1 queueing problem in which storage and retrieval requests are the customers and the vehicle (NALT or AS/R machine) is the server. Service time is the sum of travel time and the deterministic time to pick up and deposit a pallet (TPD).

Our first contribution is the development of travel time pdfs for retrieval operations …

Modeling Of Complex Parts For Industrial Waterjet Cleaning, Braden James

Graduate Theses and Dissertations

Industrial high-pressure waterjet cleaning is common to many industries. The modeling in this paper functions inside a collaborative robotic framework for high mix, low volume processes where human robot collaboration is beneficial. Automation of pressure washing is desirable for economic and ergonomic reasons. An automated cleaning system needs path simulation and analysis to give the operator insight into the predicted cleaning performance of the system. In this paper, ablation, the removal of a substrate coating by waterjet, is modeled for robotic cleaning operations. The model is designed to work with complex parts often found in spray cleaning operations, namely parts …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

Budget-Constrained Regression Model Selection Using Mixed Integer Nonlinear Programming, Jingying Zhang

Graduate Theses and Dissertations

Regression analysis fits predictive models to data on a response variable and corresponding values for a set of explanatory variables. Often data on the explanatory variables come at a cost from commercial databases, so the available budget may limit which ones are used in the final model.

In this dissertation, two budget-constrained regression models are proposed for continuous and categorical variables respectively using Mixed Integer Nonlinear Programming (MINLP) to choose the explanatory variables to be included in solutions. First, we propose a budget-constrained linear regression model for continuous response variables. Properties such as solvability and global optimality of the proposed …

Barge Prioritization, Assignment, And Scheduling During Inland Waterway Disruption Responses, Liliana Delgado-Hidalgo

Graduate Theses and Dissertations

Inland waterways face natural and man-made disruptions that may affect navigation and infrastructure operations leading to barge traffic disruptions and economic losses. This dissertation investigates inland waterway disruption responses to intelligently redirect disrupted barges to inland terminals and prioritize offloading while minimizing total cargo value loss. This problem is known in the literature as the cargo prioritization and terminal allocation problem (CPTAP). A previous study formulated the CPTAP as a non-linear integer programming (NLIP) model solved with a genetic algorithm (GA) approach. This dissertation contributes three new and improved approaches to solve the CPTAP.

The first approach is a decomposition …

Configuring Traditional Multi-Dock, Unit-Load Warehouses, Mahmut Tutam

Graduate Theses and Dissertations

The development of expected-distance formulas for multi-dock-door, unit-load warehouse configurations is the focus of the dissertation. From formulations derived, the width-to-depth ratios minimizing expected distances are obtained for rectangle-shaped, unit-load warehouse configurations. Partitioning the storage region in the warehouse into three classes, the performance of a multi-dock-door, unit-load warehouse is studied when storage regions can be either rectangle-shaped or contour-line-shaped. Our first contribution is the development of formulas for expected distance traveled in storing and retrieving unit loads in a rectangle-shaped warehouse having multiple dock doors along one warehouse wall and storage racks aligned perpendicular to that wall. Two formulations …

Modeling And Solution Approaches For Non-Traditional Network Flow Problems With Complicating Constraints, Negin Enayaty Ahangar

Graduate Theses and Dissertations

In this dissertation, we model three network-based optimization problems. Chapter 2 addresses the question of what the operation plan should be for interdependent infrastructure systems in resource-constrained environments so that they collectively operate at the highest level. We develop a network-based operation model of these systems that accounts for interdependencies among them. To solve this large-scale model, a solution approach is proposed that relatively quickly generates high-quality solutions to the problem.

Chapter 3 presents a routing model for a single train within a railyard with the objective of minimizing the total length traveled by train. The difference between this problem …

Essays On Applications Of Transportation Network Design And Optimization, Amirali Ghaharikermani

Graduate Theses and Dissertations

In this dissertation, we address different transportation problems. The three main outcomes are: designing a battery swap station network, studying gaps in Empty Container Management literature, designing a model with similar characteristics to the vehicle routing problem as well as implementation scenario for it to be applied for a real-world case.

For the designed battery swap station, a model is developed for customer demand satisfaction that permits construction of different types of BSS in the planning network. Our solution methodology is a Tabu Search algorithm combined with a dynamic programming initialization. Numerous tests showed that the proposed TS approach provides …

Convergent Set-Based Design In Integrated Analysis Of Alternatives: Designing Engineered Resilient Systems, Zephan Wright Wade

Graduate Theses and Dissertations

This thesis presents a comprehensive package for understanding and expanding set-based design quantification through the definition and demonstration of Convergent set-based design (SBD). Convergent SBD is a technique developed for the Engineered Resilient Systems program sponsored by the Department of Defense. Convergent SBD contributes a repeatable methodology with the goal of mathematically eliminating inefficient sets. The study of Convergent SBD led to the development of dominance identification criteria equations using comparison of statistical means. The demonstration of Convergent SBD also illustrates the effect of mission resilience in the tradespace and the impact mission resilience has on preference. Finally, Convergent SBD …

Predicting The Impact Of Resource Delays On A Construction Project’S Critical Path Using Monte Carlo Simulation, Colby Weishaar

Graduate Theses and Dissertations

The construction industry is a complex and evolving industry, making the project manager’s job of planning, organizing, and making decisions a difficult one. One of the most difficult decisions throughout a project is determining what resources are needed to complete a task by the deadline. Uncertainties cause risks within the schedule often creating delays for which the project manager must develop a mitigation plan once risks are identified. After conducting a review of the literature, no research was found examining the use of an analytical model to estimate the delays caused within the resource allocation process. If an analytical model …

Quantitative Methods For Select Problems In Facility Location And Facility Logistics, Bin Li

Graduate Theses and Dissertations

This dissertation presented three logistics problems. The first problem is a parallel machine scheduling problems that considers multiple unique characteristics including release dates, due dates, limited machine availability and job splitting. The objective of is to minimize the total amount of time required to complete work. A mixed integer programming model is presented and a heuristic is developed for solving the problem. The second problem extends the first parallel scheduling problem to include two additional practical considerations. The first is a setup time that occurs when warehouse staff change from one type of task to another. The second is a …

Optimal Allocation Of Resources In Reliability Growth, Mohammadhossein Heydari

Graduate Theses and Dissertations

Reliability growth testing seeks to identify and remove failure modes in order to improve system reliability. This dissertation centers around the resource allocation across the components of a multi-component system to maximize system reliability. We summarize this dissertation’s contributions to optimal resource allocation in reliability growth.

Chapter 2 seeks to deploy limited testing resources across the components of a series-parallel system in effort to maximize system reliability under the assumption that each component’s reliability exhibits growth according to an AMSAA model with known parameters. An optimization model for this problem is developed and then extended to consider the allocation of …

Demonstrating Set-Based Design Techniques- A Uav Case Study, Colin Small

Graduate Theses and Dissertations

The Department of Defense (DoD) and Engineered Resilient Systems (ERS) community seek to improve decision making in the Analysis of Alternatives (AoA) process by incorporating resilience and leveraging the capabilities of model-based engineering (MBE) early in the design process. Traditional tradespace exploration utilizing Point-Based Design (PBD) often converges quickly on a solution with subsequent engineering changes to modify the design. However, this process can lead to a suboptimal solution if an incorrect initial solution is chosen. Enabled by MBE, Set-Based Design (SBD) considers sets of all possible solutions and enables down-selecting possibilities to converge on a final solution. Using a …

A Multi-Objective Affinity-Based Savings Algorithm For Improving Processes In Centralized Warehousing Operations, Mckenlee M. Coco

Graduate Theses and Dissertations

Traditional approaches to improving material management processes in warehousing operations tend to focus on one of three major areas: facility design, order picking and sorting, and order batching. In an effort to improve total system savings, a new affinity function is developed and applied to batching logic to create a multi-objective problem. The proposed multi-objective function incorporates user input to increase adaptability to changing demand and flexibility to changing requirements. Computational experience shows the new function leads to solutions that deviate no more than 25% from the most efficient distance based picking route by the same batching logic, while creating …

Analyzing The Fundamental Aspects And Developing A Forecasting Model To Enhance The Student Admission And Enrollment System Of Msom Program, Sultanul Nahian Hasnat

Graduate Theses and Dissertations

A forecasting model, associated with predictive analysis, is an elementary requirement for academic leaders to plan course requirements. The M.S. in Operations Management (MSOM) program at the University of Arkansas desires to understand future student enrollment more accurately. The available literature shows that there is an absence of forecasting models based on quantitative, qualitative and predictive analysis. This study develops a combined forecasting model focusing on three admission stages. The research uses simple regression, Delphi analysis, Analysis of Variance (ANOVA), and classification tree system to develop the models. It predicts that 272, 173, and 136 new students will apply, matriculate …

Systematic Review For Water Network Failure Models And Cases, Yufei Gao

Graduate Theses and Dissertations

As estimated in the American Society of Civil Engineers 2017 report, in the United States, there are approximately 240,000 water main pipe breaks each year. To help estimate pipe breaks and maintenance frequency, a number of physically-based and statistically-based water main failure prediction models have been developed in the last 30 years. Precious review papers focused more on the evolution of failure models rather than modeling results. However, the modeling results of different models applied in case studies are worth reviewing as well.

In this review, we focus on research papers after Year 2008 and collect latest cases without repetition. …

Methodologies For Solving Integrated Transportation And Scheduling Problems, Fereydoun Adbesh

Graduate Theses and Dissertations

This research proposes novel solution techniques to optimize two real-world problems in the area of scheduling and transportation. We first consider a model for optimizing the operations of dredges. In this problem, scheduling and assignment decisions are integrated across a finite planning horizon. Additional constraints and problem elements explicitly considered include, but are not limited, to environmental work window restrictions, budget limitations, dredge operation rates and schedule-dependent dredge availability. Our approach makes use of Constraint Programming (CP) to obtain quality and robust solutions within an amount of time small enough to be useful to practitioners. The expanded feature set of …

Airport Security Investment Model, Joshua Daniel Bolton

Graduate Theses and Dissertations

In an increasingly mobile and diverse world, it is difficult to quantify the risk, or danger, associated with traveling. Airports have suffered greatly for being unable to define potential risks and protect against them. Intelligent adversary risk is a complicated high-level issue for many airports. Airports are targeted because of the large amount of people in a confined space and the social, economic, and psychological impact of terrorist attacks on the American people. In the months following September 11th, 2001, the airline industry in the United States lost $1.1 billion in revenue. The American people stayed grounded, for fear of …

Essays In Measuring, Controlling, And Coordinating Supply Chain Inventory And Transportation Operations, Payam Parsa

Graduate Theses and Dissertations

Supply chain collaboration programs, such as continuous replenishment program (CRP), is among the most popular supply chain management practices. CRP is an arrangement between two partners in a supply chain to share information on a regular basis for lowering logistics costs while maintaining or increasing service levels. CRP shifts the replenishment responsibility to the upstream partner to avoid the bullwhip effect across the supply chain. This dissertation aims to quantify, measure, and expand the benefits of CRP for the purpose of reducing logistics cost and improving customer service. The developed models in this dissertation are all applied in different case …

An Economic Analysis Of Residential Photovoltaic Systems With And Without Energy Storage, Rodney Moses Kizito

Graduate Theses and Dissertations

Residential photovoltaic (PV) systems serve as a source of electricity generation that is separate from the traditional utilities. Investor investment into residential PV systems provides several financial benefits such as federal tax credit incentives for installation, net metering credit from excess generated electricity added back to the grid, and savings in price per kilowatt-hour (kWh) from the PV system generation versus the increasing conventional utility price per kWh. As much benefit as stand-alone PV systems present, the incorporation of energy storage yields even greater benefits. Energy storage (ES) is capable of storing unused PV provided energy from daytime periods of …