Industrial Engineering Commons^™

Energy Forensics Analysis, Rupa Das

Graduate Theses, Dissertations, and Problem Reports (ETD)

The energy consumed by a building can reveal information about the occupants and their activities inside the building. This could be utilized by industries and law enforcement agencies for commercial or legal purposes. Utility data from Smart Meter (SM) readings can reveal detailed information that could be mapped to foretell resident occupancy and type of appliance usage over desired time intervals. However, obtaining SM data in the United States is laborious and subjected to legal and procedural constraints. This research develops a user-driven simulation tool with realistic data options and assumptions of potential human behavior to determine energy usage patterns …

Evaluation Of Object Attributes To Study Speed-Accuracy Trade-Off Of Gloves Using Iso 9241-411 Standard, Isha Gaut

Graduate Theses, Dissertations, and Problem Reports (ETD)

Selection of appropriate gloves plays an important role in the overall comfort and productivity of workers. Currently, there are no standards and/or guidelines available to systematically evaluate the glove performance based on speed-accuracy trade-off. The ISO 9241-411 standard which is based on Fitts’ Law has been extensively used in the literature to measure speed-accuracy trade-off in terms of throughput in the virtual environments. This study was aimed at developing guidelines for implementing ISO 9241-411 standard in the physical environment so that it can be used to estimate (and compare) throughputs of safety gloves. Specifically, the various physical attributes of objects …

Sustainability-Based Expert System For Additive Manufacturing And Cnc Machining, Josage Chathura Pamuditha Perera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The development of technologies which enable resource efficient production is of paramount importance for the continued advancement of the manufacturing industry. In order to ensure a sustainable and clean energy future, manufacturers should be able to contrast and validate existing manufacturing technologies on a sustainability basis. In the post COVID-19 era of enterprise management, the use of artificial intelligence to simulate human expert decision making abilities will open new doors to achieving heightened levels of productivity and efficiency. The introduction of innovative technologies such as CNC machining and 3D printing to production systems has redefined the manufacturing landscape in a …

Performance Study Of Five Different Cabin Air Filters In The Laboratory And On-Road Drive, Fahad Alqahtani

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the aims of installing ventilation filters in a car is to prevent vehicle occupants from inhaling potentially harmful aerosols emanating from the environment. Vehicle cabin filters are essential in ensuring that a vehicle's air conditioning system provides clean air to its occupants. The purpose of the cabin filter is to improve air quality inside the car to provide better comfort and better protect occupants from experiencing unwanted respiratory problems. Using cabin filters in air conditioning systems is a common practice in modern vehicle manufacturing. Scientists and engineers are continually seeking new ways of improving the efficiency and effectiveness …

Evaluation Of Fitts’ Throughput As A Possible Performance Measure For Manual Assembly Tasks, Pradyumna Bettagere Jagadish

Graduate Theses, Dissertations, and Problem Reports (ETD)

Assembly lines are the backbone of the manufacturing sector. Workers at the assembly lines are expected to perform fast pace hand-arm exertions with precision and accuracy. To protect the workers from injuries, OSHA mandates the use of personal protective equipment (PPE) including gloves. Certain assembly operations require the use of special gloves. Some of these gloves can inhibit hand performance, further increasing the task difficulty. The Index of Difficulty (ID) is a metric measured in ‘bits’ quantifies task difficulty through the quotient of target width and target motion, i.e., distance travelled. The time required to complete the target motion is …

A Study Of Impact Protection Of Metacarpal Gloves, Faisal Mohammed Alessa

Graduate Theses, Dissertations, and Problem Reports (ETD)

Work-related wrist, hand, and finger injuries are highly prevalent in manufacturing and extractive industries. An analysis of mining-related hand injury data from over the past two decades (Alessa et al., 2020) showed that hand injuries caused by insufficient protection against impact loads (e.g. struck by accidents) were categorized with high severity. Existing literature lacks clear classification and quantification methods for the protection provided by impact-resistant gloves (i.e. metacarpal gloves). A new method to establish a quantitative measure of performance for commonly used metacarpal gloves was developed and evaluated.

In the first specific aim, an experimental study using cadaveric hand specimens …

Assessment Of Heat Stress For Outdoor Work Conditions In Saudi Arabia, Jamal Alanazi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Outdoor workers have an increased risk of heat stress in Saudi Arabia since it is one of the hottest places in the Middle East. Recently, the government decided to limit outdoor work hours during the months of June, July, and August every year, and banned working under the direct sunlight from 12:00 to 03:00 p.m., although outdoor workers in the petroleum, natural gas, or emergency maintenance work industries are exempt from this prohibition. Traditionally, the efforts by safety and health professionals to mitigate work-related heat injury has been directed toward the assessment of environmental heat stress (e.g., wet-bulb globe temperature), …

Assess The Performance Against Ets And Pm1 And Evaluate The Users’ Experiences Of Comfort Of Nasal Filters, Ibrahim Almuhaidib

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many cities around the world experience severe air pollution. According to the World Health Organization (WHO), 7 million people die annually from exposure to small airborne Particulate Matter (PM) that is found in atmospheric pollution. Particulate matter in atmospheric pollution is one of six classifications of common air pollutants and is typically referred to as PM₁ and PM_2.5. Particulates designated as PM₁ and PM_2.5 refer to particles having aerodynamic diameters of 1 or 2.5 micrometer (µm), respectively. These size ranges of particles are the most commonly found in air pollution. It is hard to differentiate …

Transit Agencies Performance Assessment And Implications, Parisa Hajibabaee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Although most transit systems operate in small urban and rural areas in the United States, these systems have rarely received the same attention as their urban counterparts, both in terms of ensuring the efficiency and effectiveness of their operations and understanding the factors that affect their performance. This thesis's main goals are to assess the performance of rural and small urban public transit agencies and help them evaluate adopting a ridehailing program, thereby improving their performance. We applied operations research and decision-making tools to two public transit projects in small urban and rural areas. The first project focuses on three …

Capital Equipment Upgrade Strategy In The Context Of Servitization, Muztoba Ahmad Khan

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building on manufacturing servitization and Product-Service Systems (PSS) business models, the midlife equipment upgrade services introduce promising alternative to traditional equipment replacement, which is often capital intensive and time consuming. Midlife upgrade describes the process of improving the performance of and adding new functional capabilities into equipment during their active usage period by embedding technological innovation while satisfying evolving customers’ preferences over time. This strategy, however, has thus far been discussed primarily from a conceptual perspective in literature, and the state of the art lacks empirical evidence regarding the potential and outcome of successful midlife upgrades. Additionally, explorative studies report …

Metaheuristics For The Generalized Quadratic Assignment Problem, Roseline Mostafa

Graduate Theses, Dissertations, and Problem Reports (ETD)

The generalized quadratic assignment problem (GQAP) is the task of assigning a set of facilities to a set of locations such that the sum of the assignment and transportation costs is minimized. The facilities may have different space requirements, and the locations may have varying space capacities. Also, multiple facilities may be assigned to each location such that space capacity is not exceeded. In this research, an application of the GQAP is presented for assigning a set of machines to a set of locations on the plant floor. Two meta-heuristics are proposed for solving the GQAP: tabu search (TS) and …

Implications Of Variability Of Electromyographic Measurements For Assessing Localized Muscle Fatigue, Hamad Nasser Alasim

Graduate Theses, Dissertations, and Problem Reports (ETD)

The impact of work-related musculoskeletal disorders (WMSDs) is enormous due to a combination of direct and indirect costs associated with healthcare, lost workdays and human suffering. Because of the established relationship between Localized Muscle Fatigue (LMF) development and WMSDs, and in order to reduce and/or prevent WMSDs in workplaces, different fatigue assessment methods have been developed. Surface Electromyography (SEMG) is a commonly used LMF assessment technique. The SEMG signals are typically analyzed in time and frequency domains to predict LMF based on a relative change with respect to initial, or under no-fatigue conditions. Quantifying such change, however, relies on the …

Analysis Of The Integration Of Dfm Techniques And Effective Machining Parameter Selection In Metal Parts Manufacturing, Omar Ahmed Al-Shebeeb

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation investigates the minimization of part design with self-locating features. The research focuses primarily on self-fastening characteristics, standardization of parts, and minimal use of fasteners. Further, the present research studies the design for base parts in the construction of a moving joint system, in order to locate potential part and system design improvements. This process may then be extended to industrial applications in the manufacturing industry. Relatively little work to date has examined the significance of Design for Manufacturing Techniques (DFMT), with their inherent machine element systems and machining parameters to investigate which DFMT has the most influence on …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports (ETD)

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …

Towards A Framework For Smart Manufacturing Adoption In Small And Medium-Sized Enterprises, Sameer Mittal

Graduate Theses, Dissertations, and Problem Reports (ETD)

Smart Manufacturing (SM) paradigm adoption can scale production with demand without compromising on the time for order fulfillment. A smart manufacturing system (SMS) is vertically and horizontally connected, and thus it can minimize the chances of miscommunication. Employees in an SME are aware of the operational requirements and their responsibilities. The machine schedules are prepared based on the tasks a machine must perform. Predictive maintenance reduces the downtime of machines. Design software optimizes the product design. Production feasibility is checked with the help of simulation. The concepts of product life cycle management are considered for waste reduction. Employee safety, and …

Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method, Bryant Jamison Spencer

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the pharmaceutical manufacturing world, a deadline could be the difference between losing a multimillion-dollar contract or extending it. This, among many other reasons, is why good scheduling methods are vital. This problem report addresses Flexible Flowshop (FF) scheduling using Simulated Annealing (SA) in conjunction with the Steepest Descent heuristic (SD).

FF is a generalized version of the flowshop problem, where each product goes through S number of stages, where each stage has M number of machines. As opposed to a normal flowshop problem, all ‘jobs’ do not have to flow in the same sequence from stage to stage. The …

Can Fitts' Throughput Be A Predictor Of Muscle Fatigue – A Study Based On Metacarpal Gloves?, Sachin Sah

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, Fitts’ throughput was used to estimate throughput for metacarpal gloves. Fitts’ throughput combines speed and accuracy during target transfer/movement tasks into a single performance index. It was hypothesized that the throughput will be affected by the glove condition and it will exhibit a relationship with the physiological response of hand muscles and perceived exertions. Fifteen healthy participants (10 males, 5 females) were recruited for data collection. Each participant performed a series of target transfer tasks using four glove conditions: (1) a pigskin leather (glove 1); (2) a synthetic fiber glove (glove 2); (3) a goat-grain leather glove …

Performance Study Of An Unconventional Breathresponse Papr Against A N95 Ffr And Conventional Paprs, Huihui Yang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Healthcare workers (HCWs) are the first responders when infectious pathogens occur. Powered air-purifying respirators (PAPRs) are one of the most widely used personal protective equipment for healthcare workers. Currently, few studies have been performed with HCWs in the actual healthcare work environments to assess discomforts, acceptance and protective efficiency towards wearing and use of PAPRs. The main purpose of this dissertation was to introduce and assess a brand new unconventional PAPR (Koken breath-response PAPR). The protection performance and user preferance of this unconventional PAPR were studided and compared to that of a N95 FFR and traditional PAPRs.

Firstly, a laboratory …

A Lab-Based Study Of N95 Ffrs Against Cigarette Smoke Under Varying Concentrations And Sealing Conditions, Jacob Davis

Graduate Theses, Dissertations, and Problem Reports (ETD)

Respirators are a common form of protection when working in environments where workers are exposed to harmful agents. One exposure that has not been rigorously tested is cigarette smoke. Air sampling was conducted to test the effectiveness of four different respirators N95 Respirators for various concentrations of cigarette smoke and seal conditions and for different respirators. The Moldex 2200, Moldex 2300 (exhalation valve), Gerson 1730, and 3M 8210V (Exhalation valve) were used for testing. The set concentrations were 100,000: 200,000: and 400,000 cm3 with an error allowance of 20% for each concentration. Different flow rates (15, 30, 50, and 85 …