Industrial Engineering Commons^™

Disruption Response Support For Inland Waterway Transportation, Jingjing Tong

Graduate Theses and Dissertations

Motivated by the critical role of the inland waterways in the United States' transportation system, this dissertation research focuses on pre- and post- disruption response support when the inland waterway navigation system is disrupted by a natural or manmade event. Following a comprehensive literature review, four research contributions are achieved. The first research contribution formulates and solves a cargo prioritization and terminal allocation problem (CPTAP) that minimizes total value loss of the disrupted barge cargoes on the inland waterway transportation system. It is tailored for maritime transportation stakeholders whose disaster response plans seek to mitigate negative economic and societal impacts. …

Multistage Accelerated Reliability Growth Testing Model And Data Analysis, Leiying Jiang

Graduate Theses and Dissertations

Accelerated reliability growth testing has recently received a renewed interest in reliability engineering. The concepts of accelerated testing and reliability growth individually have been used in a variety of applications, either for hardware systems or software systems. The advantage of using a combined strategy is that it could shorten the testing time while maximizing the reliability. In the literature, there are many references related to optimal test design for reliability from either a component level or a system level. In this research, we suggest an approach which conducts accelerated testing at the component level while supporting estimates of reliability at …

Models For Incorporating Block Scheduling In Blood Drive Staffing Problems, Yulong Su

Industrial Engineering Undergraduate Honors Theses

The purpose of this research is to develop decision support models that can be used by the American Red Cross (ARC) to schedule blood drives with improved shifts for the phlebotomists that staff them. Currently, phlebotomists work inconsistent hours and the ARC believes this is a leading cause of high turnover rates they are experiencing. For example, phlebotomists sometimes staff a blood drive until 11 PM one night and will have to work another at 8 AM the next morning. Assigning phlebotomists more consistent shifts in blocks of time will definitely improve their work schedule. Before switching to block scheduling, …

Uncertainty In Relief Supply Distribution, Christopher A. Bayles

Industrial Engineering Undergraduate Honors Theses

In the aftermath of a natural disaster the efficient planning of humanitarian relief efforts, e.g., delivering supplies to locations in need, can often mean the difference between lives being saved and lives being lost. In this paper we focus on two things: (1) appropriate objectives for routing problems in the context of delivery of relief supplies, and (2) how to handle the uncertainty associated with delivery of relief supplies after a disaster. Through applying uncertainty to parameters such as travel time between locations, we seek to examine if/how optimal routes change as a result of different objectives and the presence …

Time-Driven Activity-Based Costing For Healthcare Provider Supply Chain Processes, Martha Isaura Gonzalez

Graduate Theses and Dissertations

In a time when healthcare costs continue to rise, nearly a third of hospital operating expenses are related to supplies, and the healthcare supply chain is complex, it is pertinent for healthcare providers to have a clear understanding of their healthcare supply chain process costs. Having a clear picture into how these costs are driven and where opportunities for cost reductions exist can support supply chain efficiencies. In this research, we develop a Time-Driven Activity-Based Costing (TDABC) supply chain cost management tool for healthcare providers. A TDABC management system can provide healthcare providers with valuable product and process supply chain …

Poisson Distributed Individuals Control Charts With Optimal Limits, Negin Enayaty Ahangar

Graduate Theses and Dissertations

The conventional method used in attribute control charts is the Shewhart three sigma limits. The implicit assumption of the Normal distribution in this approach is not appropriate for skewed distributions such as Poisson, Geometric and Negative Binomial. Normal approximations perform poorly in the tail area of the these distributions. In this research, a type of attribute control chart is introduced to monitor the processes that provide count data. The economic objective of this chart is to minimize the cost of its errors which is determined by the designer. This objective is a linear function of type I and II errors. …

Detailed Inventory Record Inaccuracy Analysis, Hayrettin Kaan Okyay

Graduate Theses and Dissertations

This dissertation performs a methodical analysis to understand the behavior of inventory record inaccuracy (IRI) when it is influenced by demand, supply and lead time uncertainty in both online and offline retail environment separately. Additionally, this study identifies the susceptibility of the inventory systems towards IRI due to conventional perfect data visibility assumptions. Two different alternatives for such methods are presented and analyzed; the IRI resistance and the error control methods. The discussed methods effectively countered various aspects of IRI; the IRI resistance method performs better on stock-out and lost sales, whereas error control method keeps lower inventory. Furthermore, this …

Disaster Relief Models: Location Of Points Of Distribution, Othman Boudhoum

Industrial Engineering Undergraduate Honors Theses

This project consists of developing a Location Allocation model that focuses on determining the locations of relief supply Points of Distribution (PODs) after a natural disaster and how to assign demand points to them. According to FEMA, PODs are “centralized locations where the public picks up life sustaining commodities following a disaster or emergency” [1]. After each disaster, decisions have to be made to ensure a good delivery of resources in a timely manner. The road infrastructure may be damaged due to the disaster. Some roads might become inoperable, and some bridges are expected to fail. The model studied in …

College Football Rankings: An Industrial Engineering Approach, Brent H. Wiles

Industrial Engineering Undergraduate Honors Theses

In using an industrial engineering approach, we utilize optimization and mathematical modeling techniques to rank college football teams when viewed as a quadratic assignment problem.

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

Locating And Protecting Facilities Subject To Random Disruptions And Attacks, Hugh Medal

Graduate Theses and Dissertations

Recent events such as the 2011 Tohoku earthquake and tsunami in Japan have revealed the vulnerability of networks such as supply chains to disruptive events. In particular, it has become apparent that the failure of a few elements of an infrastructure system can cause a system-wide disruption. Thus, it is important to learn more about which elements of infrastructure systems are most critical and how to protect an infrastructure system from the effects of a disruption. This dissertation seeks to enhance the understanding of how to design and protect networked infrastructure systems from disruptions by developing new mathematical models and …

Response Strategies For Critical Supply Shortages In Healthcare, Christopher Adkins

Industrial Engineering Undergraduate Honors Theses

The shortage of critical medical supplies in healthcare facilities is of obvious concern to both medical professionals and patients. Speci cally, the growing concern in this area is motivated, at least in part, by our dependence on generic pharmaceuticals. In the absence of FDA restrictions on the production of critical generic goods (e.g. morphine), manufacturers possess little financial incentive to produce numerous products whose patents have expired, but remain critical to patient care. Therefore, faced with crippling shortages, hospitals are left seeking ad-hoc solutions for meeting patient demand of these items. This work considers quantitative response strategies to mitigate the …

Patient And Nurse Considerations In Home Health Routing With Remote Monitoring Devices, Jessica Spicer

Graduate Theses and Dissertations

We build on the current consistent vehicle routing problem literature by formulating a novel multi- objective mathematical model of the home health scheduling and routing problem that includes the option of assigning some patient visits to remote monitoring devices, with the objectives of mini- mizing total cost, achieving nurse consistency and creating balanced nurse workloads. A heuristic solution approach that approximates the efficient frontier of this multiobjective problem is pre- sented and validated, and the results of using this methodology to solve several realistic instances are included. We also analyze the assignment of patients to devices and present some managerial …

Empirical Analysis Of The Relay Network Design Problem, Sergio Maldonado Soria Galvarro

Industrial Engineering Undergraduate Honors Theses

Definition and optimization of alternative methods for truckloads routing.

Adaptive Intensity Modulated Radiation Therapy Planning Optimization With Changing Tumor Geometry And Biology Enforcing Both Cumulative And Fraction Size Dose Constraints, Behlul Saka

Graduate Theses and Dissertations

Intensity Modulated Radiation Therapy (IMRT) is a modern technique of delivering radiation treatments to cancer patients. In IMRT technology, intensities must be chosen for the many small unit grids into which the beams are divided to produce a desired distribution of dose at points throughout the body with the goal of maximizing dose delivered to the tumor while sparing healthy tissues from excessive radiation and keeping dose homogeneous across the tumor. Although IMRT plans are optimized as a single overall treatment plan, they are delivered over 30-50 treatment sessions (fractions) and both cumulative and per-fraction dose constraints apply. The extended …

Integrated Planning For Rural Rail Transportation, Jeffrey Cohan Gwaltney

Graduate Theses and Dissertations

Population growth in rural areas has led to new interest in rail transportation. Planning a passenger rail system involves numerous difficult decisions, most representing a trade-off between customer service and cost. In this work, we attempt to integrate many of these planning decisions. We consider strategic decisions such as station location and vehicle procurement, as well as tactical issues that include vehicle scheduling. Our integrated model exploits the linear network structure that best suits many rural American communities, including Northwest Arkansas. Due to the intractability of the integrated rail planning problem, we have developed a customized heuristic approach to solve …

Inventory Models For Intermittent Highly Variable Demand And Policy Parameter Adjustments To Meet Desired Service Level Requirements, Yasin Unlu

Graduate Theses and Dissertations

This dissertation consists of three assays. The first assay examines the robustness of lead time demand models for the continuous review (r;Q) inventory policy. A number of classic distributions as well as distribution selection rules are examined under a wide variety of demand conditions. First, the models are compared to each other by assuming a known demand process and evaluating the errors associated with using a different model. Then, the models are examined using a large sample of simulated demand conditions. Approximation results of inventory performance measures - ready, rate excepted number of backorders and on-hand inventory levels are reported. …

Applying Inventory Control Practices Within The Sisters Of Mercy Health Care Supply Chain, Server Apras

Graduate Theses and Dissertations

This research lays a foundation for the better understanding of the application and acceptance of more advanced inventory control practices within the health care supply chain. The demand characteristics and optimal control policies for pharmaceutical items within a multi-echelon provider network are examined within the framework of a case study. Demand forecasting algorithms were applied to forecast demand for inventory control procedures. A spreadsheet-based inventory planning tool was used to minimize the inventory holding and ordering costs subject to fill rate constraints. The costs of inventory control models are compared to the current ordering and inventory control strategies to document …

Evaluating The Capacity Of A Proton Therapy Facility, Ridvan Gedik

Graduate Theses and Dissertations

A relatively new consideration in proton therapy planning is the requirement that the mix of patients treated satisfy desired percentages. Since it is very dicult to satisfy an integer number of patients in light of these requirements, deviations from patient mix preferences and their impacts on operational capabilities are of particular interest to healthcare planners. Therefore, we propose a bicriteria mathematical programming model that determines an outpatient schedule maximizing the number of fractions and minimizing the deviations from the patient mix ratios over the planning horizon. The tradeos between the two objectives are identied through analysis of ecient frontiers. Our …

An Empirical Investigation Of Supply Chain Excellence In Healthcare, Brian Keith Smith

Graduate Theses and Dissertations

This research is motivated by opportunities to improve the cost and quality of healthcare delivery through improved supply chain processes. This research assesses the quality of the healthcare supply chain and identifies factors that are driving supply chain excellence among organizations in the healthcare industry. The first objective of this research is to assess the state of quality measurement in the healthcare supply chain. The achievement of this first objective is presented in Chapter 3 of this dissertation in the form of a manuscript accepted for publication in The Quality Management Journal. The second research objective is to develop …

Re-Estimating And Remodeling General Aviation Operations, Ryan Black

Industrial Engineering Undergraduate Honors Theses

The objective of this project is to understand the usual or “acceptable” characteristics of general aviation flights and airports so that unusual activity can be detected, analyzed, and resolved. To do this, a quality control model may be built to determine whether an airport is at high risk for a terrorist attack. For an appropriate model to be built there must be an adequate amount of data that describes the general aviation airport and its operations. In order to facilitate this data the general aviation industry must “continue to improve intelligence and information sharing (Homeland Security Advisory Council 2008).” This …

Development Of A Ram Shared Service Tool For The Service Availability Of On-Board And Trackside Systems, Bailey Frazier

Industrial Engineering Undergraduate Honors Theses

A decision-support tool designed specifically to be used by technical specialists is an aid that would be helpful to many different companies, departments and projects – regardless of industry. With the intent of making manual processes quicker, less error-prone, and more userfriendly, decision-support tools are becoming more desired as they grow increasingly more common in the business world today.
The decision-support tool created for the purpose of this project is not an exception to any of these reasons. The ALSTOM Transport Information Solutions Reliability, Availability, and Maintainability (RAM) Shared Service Team bears the burden and tedious process of working with …

Incorporating Vertical Travel Into Non-Traditional Cross Aisles For Unit-Load Warehouse Designs, Kirby A. Clark

Industrial Engineering Undergraduate Honors Theses

We propose modifications to the travel-time models for non-traditional warehouse layouts, Flying-V Fishbone, by incorporating a vertical travel dimension. The Flying-V model determines a cross aisle intersection for every picking aisle, while the Fishbone model determines a single point where the inserted cross aisle intersects the side of the warehouse. The shape and angle of the cross aisle is unrestricted for the Flying-V layout, while the angle is unrestricted for the Fishbone layout. The resulting non-linear optimization models incorporate Chebychev travel within the picking aisles. We compare both the shape of the aisle and the percent improvement over a traditional …

Simulation Of Multicultural Factors In Terrorism Networks, Jared Townsley

Industrial Engineering Undergraduate Honors Theses

As globalization extends its influence to the far corners of the world, rapid developments and changes are taking place economically, socially, and environmentally. Cultural differences between and within organizations have become significant during the past few years as politics and marketplaces expand globally to include multiple nationalities, beliefs, and value systems. Unfortunately, terrorism has also felt the effects of globalization as organizations such as Al-Qaeda seek to expand their influence worldwide. Although a considerable amount of research has been conducted to identify key cultural factors that play major roles within organizations, simulation models that attempt to quantify cultural effects are …

Evaluating Arkansas Roadway Intersection Accidents Using Traffic Safety Analysis Methods: Generalized Estimating Equations And Roadway Observation, Jacob Mercer

Industrial Engineering Undergraduate Honors Theses

Considerable research has been made in recent years to evaluate road traffic safety. This is especially true with the United States, whose international rank in public safety is rapidly declining. In 2004, Arkansas ranked as the third highest in traffic fatalities among all the states. These are striking numbers that reflect the lack of attention that the state has received in terms of evaluating road traffic safety. Historically, this safety is measure by one of two methods: Statistical analyses of historical data or hands-on, observational analyses of present safety conditions. Rarely in research are both methods used within the same …

A Study Of The Impact Of Prognostic Errors On System Performance, Mauricio Carrasco

Inquiry: The University of Arkansas Undergraduate Research Journal

Condition-based maintenance is growing in popularity as a means of improving equipment maintenance efficiency. Whether it be the maintenance of an airplane, a computer system, or any type of physical system, the prognostic tools associated with condition-based maintenance are subject to statistical error. These errors can lead to unnecessary preventive maintenance due to underestimation of system remaining life and unnecessary system failures due to overestimation of system remaining life. What is not clear is if these statistical errors outweigh the benefits of a condition-based maintenance policy. This study attempts to address this concern through the evaluation and comparison of three …

The Need For Pfc Abatement In Semiconductor Manufacturing, Mohsen Manesh, Brian Kendrick

Inquiry: The University of Arkansas Undergraduate Research Journal

Perfluorocompounds (PFCs) are highly stable chemical compounds used in two integral steps of semiconductor manufacturing: chemical vapor deposition (CVD) chambers and etch chambers. Unfortunately, PFCs are also greenhouse gases linked to global warming. This, combined with their long atmospheric lifetimes gives them global warming potentials much higher than C02 the principal greenhouse gas. In a series of voluntary agreements with the United States and other national governments, the worldwide semiconductor industry has set a goal of reducing PFC emissions to 90% of their 1995 levels. To reach this goal, researchers have explored four main methods of reduction: substitution of PFCs, …